提高镭射光柱卡纸色标光检测信号识别精度研究

目的 针对凹版印刷以镭射光柱纸作为承印物,镭射光柱对色标检测传感器产生干扰,致使镭射光柱纸不能使用传统套印工艺进行印刷,提出一种可直接在镭射光柱区域直接印刷套准色标的新工艺与技术方案。方法 对色标传检测感器检测原理进行分析,分析镭射光柱纸的特点以及对色标传感器造成的干扰。根据镭射光柱光谱反射率曲线来进行滤光镜片的选取,同时也加入衰减镜片以及消光膜进行组合实验测量电压,实验使用松德凹印机组进行。以白卡纸套印电压作为参考,选取不同镜片组合进行生产打样。结果 镜片组合可以滤除镭射光柱,色标传感器能准确检测色标光信号,上机打样满足高精度多色套印,且不需要复杂的镂空、遮盖工艺,节省了一组色序,并节省了2%的承印物原材料。结论 对色标检测传感器检测原理的分析以及对镭射光柱纸的光谱反射率曲线的测量,实现了使用滤光镜片组合对镭射光柱的滤除,证明了套准标记可直接印刷在镭射光柱区域的可行性。同时,提高了承印物的利用率,减低了油墨使用量。     

Color adaptation for anomalous trichromats

In this article, we propose a content‐based color adaptation method for color vision impairment, especially for anomalous trichromats, to improve color information accessibility. Color degradation caused by anomalous trichromacy is compensated in digital color content with a range of the visible spectrum corresponding to color deficiency characteristics. To verify the usefulness of the proposed method, we performed clinical experiments as well as computer simulations. The results of both the experiments and the simulations show that the proposed adaptation could convey better color information to anomalous trichromats. © 2004 Wiley Periodicals, Inc. Int J Imaging Syst Technol 14, 16–20, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/ima.20002     

烧结温度对硼硅基质荧光玻璃发光性能影响

采用共烧结法制备了硼硅基质Ce: YAG荧光玻璃,研究了烧结温度在600℃~900℃范围内, Ce: YAG荧光玻璃的发光强度变化和色坐标漂移规律。结果表明, 随着烧结温度的升高, Ce: YAG荧光玻璃发光强度先增强后减弱, 700℃烧结时, 荧光玻璃获得最大发光强度; 超过850℃烧结时, 荧光玻璃无发光性能; 同时, 色坐标(x, y)发生漂移, 且比相同烧结温度的荧光粉漂移幅度大。通过X射线粉末衍射仪、差示扫描量热分析仪和X射线光电子能谱分析仪测试分析表明: 随着烧结温度升高, 荧光粉中的Ce³⁺被玻璃基质氧化成Ce⁴⁺, 玻璃液体腐蚀破坏了荧光粉YAG晶体结构, 降低了荧光玻璃的发光强度, 从而导致色坐标劣化漂移。     

面向色盲人群的导视系统色彩无障碍设计研究

目的 从提高色盲人群色彩识别能力的角度,探讨导视系统色彩无障碍设计的具体方法。方法 采用色觉模拟器,将正常色觉人群与色盲人群的色彩识别效果对比分析。结论 采用色盲人群眼中色相变化较小的黄色和蓝色,采用明度对比强烈的色彩组合,注重色彩与图形的搭配,不以颜色作为唯一的识别编码,为色盲人群构建了能与正常人共享导视色彩信息的途径。     

Wavelength-scale lens microscopy via thermal reshaping of colloidal particles

Lenses are by far the most simple tools for visualization. Although they are intrinsically limited in resolution, recent efforts have aimed at focusing visible light in micro-scale lenses with subwavelength resolution, triggering an intense interest in further improving and understanding their performances. Herein, we report on a distinctive library of wavelength-scale solid immersion lenses facilitated the self-assembly of polystyrene colloidal particles. The thermally activated structural changes in polystyrene colloidal spheres directly impact the optical performance of the obtained lenses. Similar melting dynamics is observed for spheres of various size spheres at different temperatures. This allows precise control of the contact angle spanning a broad range from 180°?to <20°. The fabricated lenses display deviations from the ray optics, allowing us to resolve features as small as 180?nm using a simple microscopy setup. We succeed in proper self-assembly of the colloidal lenses that enables large-area optical nanoscopy through simple and reliable experimental protocols. The limitations and the artifacts of the present technique are discussed.     

Effects of bacterial adhesion with respect to the type of material, structure and design of intraocular lenses

The properties of the biomaterials used to constitute lenses are important factors choosing a lens for human implantation because these can influence in posterior clinical evolutions of patients. In this study, different characteristics of intraocular lenses such as chemical composition, surface roughness and lens design have been investigated in terms of their influence into a pathological environment. Eight commercial lenses were tested by optical profiling, Infrared spectra with Fourier transformation (FTIR), water-material contact angle and scanning electron microscope (SEM) to know their chemical composition and structural characteristics. These lenses were then exposed to infectious conditions in order to evaluate their responses to the bacterial environment.     

Edge‐adaptive color interpolation for complementary color filter array

Complementary color filter array (CCFA) is widely used in consumer‐level digital video cameras, since it not only has high sensitivity and good signal‐to‐noise ratio in low‐light condition but also is compatible with the interlaced scanning used in broadcast systems. However, the full‐color images obtained from CCFA suffer from the color artifacts such as false color and zipper effects. These artifacts can be removed with edge‐adaptive color interpolation (ECI) approaches which are generally used in primary color filter array (PCFA). Unfortunately, the unique array pattern of CCFA makes it difficult that CCFA adopts ECI approaches. Therefore, to apply ECI approaches suitable for CCFA to color interpolation is one of the major issues to reconstruct the full‐color images. In this paper, we propose a new ECI algorithm for CCFA. To estimate an edge direction precisely and enhance the quality of the reconstructed image, a function of spatial variances is used as a weight, and new color conversion matrices are presented for considering various edge directions. Experimental results indicate that the proposed algorithm outperforms the conventional method with respect to both objective and subjective criteria. © 2006 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 16, 92–102, 2006     

基于通用设计理论的红绿色盲包装配色方案探究

目的 基于通用设计理论,探究包装视觉设计领域里图形、文字等视觉元素,适用于不同生理机能用户的共性配色方案,解决红绿色盲因色觉差异导致的包装视觉信息读取障碍,提高包装色彩设计的普适性,完善包装视觉设计的用户体验。方法 从视觉设计角度在生物科学基础上,围绕红绿色盲与普通用户的色觉差异,分析了包装印刷色彩的视觉效果,结合包装色彩设计应用,提供了包装配色的解决方案。结论 色彩作为视觉语言传播的媒介,由于受众色觉感知差异而影响视觉信息读取,商品包装的视觉信息是消费者了解商品的重要途径,通过更具包容性的包装色彩选择和元素构成关系增强识别效果,优化包装视觉信息传播,满足各类人群的使用需求,对构筑现代文明社会有重要现实意义。     

Design and characteristics of polarization-insensitive resonant gratings for color filtering

A method of designing polarization-insensitive color filters with guided-mode resonance grating is presented. The influence of incident conditions on exciting waveguide mode is investigated, and we find that polarization insensitivity may occur at the full conical incidence. Using rigorous coupled-wave analysis, we mainly analyze the effects of waveguide thickness and fill factor on the diffracted efficiency of the grating filter. The final structural parameters of the devices for three primary colors are collected after optimization, and the calculated results show that the spectral reflectance of each color filter is basically identical for different polarization states of incident light. Moreover, field analysis by the finite-difference time-domain technique indicates that two symmetric modes are excited between the waveguide layer and substrate under full conical incidence, which is coincident with the previous theoretical study. The reported work will eliminate the restriction of polarization-dependence of color filters and greatly expand their application range.     

Color variation in periodic Ag line arrays patterned by using electron-beam lithography

Periodic Ag line arrays with different line pitches from 500 nm to 950 nm on ITO coated glass substrates have been fabricated by using electron-beam lithography (EBL) technique for studying the color light guide in a display system. The patterned Ag line array is used as a light outcoupling and color-selection component due to the emission wavelength changed by the Ag line arrays with different periodic distances that could achieve color variation. We have demonstrated that the ITO coated glass substrates containing periodic Ag line arrays with varied line pitches can be used as a color filter in a display device. This means that with a proper metallic nanostructure layer, the red, green, and blue colors in a display system can be obtained without a traditional color filter for modern multi-applications of optoelectronic display devices.     

Dy3+-doped nano-glass ceramics comprising NaAlSiO4 and NaY9Si6O26 nanocrystals for white light generation

The radiative emission properties of the Dy³⁺ ions in oxyfluoride glasses and glass ceramics have been investigated for the generation of white light. The X-ray diffraction pattern of the glass ceramics reveals the presence of NaAlSiO₄ nanocrystals along with secondary phase of NaY₉Si₆O₂₆ in the glass matrix after a suitable thermal treatment of the pristine glasses. Intense white light emission has been observed when the samples are excited with 350 nm light. Yellow to blue emission intensity ratios and chromaticity color coordinates have been determined from the visible luminescence spectra. All color coordinates are found to lie in the white region of the chromaticity color diagram proposing the suitability of the present studied materials for color display devices.     

不同光源参数对苹果电脑显示性能的影响

目的为了使苹果电脑显示器能够准确地表达输入颜色信息和显示输出的色彩,研究2种标准光源参数对苹果电脑颜色显示性能的影响。方法首先分别制作采用D50和D65标准光源相应的显示器特性文件,然后用Eyeone Pro测色计和Measuretool软件对比分析采用这2种不同特性文件时,显示器显示色块效果的差别,最后在CHROMiX ColorThink软件中生成2个特性文件对应的色空间及获得相应白点Lab值。结果色块色差平均值为7.09,大部分灰色色块色差小于1,但一些蓝色和品红色块色差很大,范围为6.38~40.63;在相应的色空间,D65光源对应的白点颜色值比D50光源的偏蓝。结论色块颜色显示效果的差异与D50和D65光源特性有密切关系。     

Super-resolution pupil filtering for visual performance enhancement using adaptive optics

Ocular aberration correction can significantly improve visual function of the human eye. However, even under ideal aberration correction conditions, pupil diffraction restricts the resolution of retinal images. Pupil filtering is a simple super-resolution (SR) method that can overcome this diffraction barrier. In this study, a 145-element piezoelectric deformable mirror was used as a pupil phase filter because of its programmability and high fitting accuracy. Continuous phase-only filters were designed based on Zernike polynomial series and fitted through closed-loop adaptive optics. SR results were validated using double-pass point spread function images. Contrast sensitivity was further assessed to verify the SR effect on visual function. An F-test was conducted for nested models to statistically compare different CSFs. These results indicated CSFs for the proposed SR filter were significantly higher than the diffraction correction (p < 0.05). As such, the proposed filter design could provide useful guidance for supernormal vision optical correction of the human eye.     

Light guide of Au nanostructures for color-filterness optoelectronic display devices

Au line nanostructures with different pitch distances from 500 nm to 950 nm on ITO coated glass substrates have been fabricated at room temperature for exploring the color light guide in all kinds of display system. The patterned Au line array is used as a light outcoupling and color-selection component due to the emission wavelength changed by the Au line arrays with different pitch distances that could achieve multi-color selections. The ITO coated glass substrates patterned with periodic Au line arrays with controlled line pitches has been demonstrated and used as a color filter in all display devices. Using a proper pitch distance of Au line nanostructures, the basic third colors of red, green, and blue (RGB) can be simply gained and controlled without a traditional color filter for future optoelectronic display devices.     

Active optics null test system based on a liquid crystal programmable spatial light modulator

We present an active null test system adapted to test lenses and wavefronts with complex shapes and strong local deformations. This system provides greater flexibility than conventional static null tests that match only a precisely positioned, individual wavefront. The system is based on a cylindrical Shack-Hartmann wavefront sensor, a commercial liquid crystal programmable phase modulator (PPM), which acts as the active null corrector, enabling the compensation of large strokes with high fidelity in a single iteration, and a spatial filter to remove unmodulated light when steep phase changes are compensated. We have evaluated the PPM's phase response at 635 nm and checked its performance by measuring its capability to generate different amounts of defocus aberration, finding root mean squared errors below λ/18 for spherical wavefronts with peak-to-valley heights of up to 78.7λ, which stands as the limit from which diffractive artifacts created by the PPM have been found to be critical under no spatial filtering. Results of a null test for a complex lens (an ophthalmic customized progressive addition lens) are presented and discussed.     

伽马辐照对掺镱硅酸盐玻璃光学性能的影响

采用传统的高温熔融法熔制了一系列掺镱硅酸盐玻璃, 并测试了这些样品经总剂量为5 kGy的钴-60伽马射线辐射源辐照前后的吸收谱、荧光谱和上转换发光光谱. 实验结果表明: 辐致暗化效应导致玻璃样品在400 nm附近出现一个非常强的宽吸收带, 其尾端可延伸至近红外区.经辐致损耗谱分析可知, 部分Yb³⁺离子在辐照过程中通过俘获电离自由电子转变成了Yb²⁺离子, 导致掺杂样品的辐致损耗明显比基质材料的要大. 在960 nm LD泵浦下辐照过的样品荧光强度、上转换发光强度及荧光寿命均有所下降, 且在476 nm附近出现了氧缺陷ODC(Ⅱ)的荧光.室温下辐照过的样品在荧光测试过程中温度明显升高并出现漂白现象.     

掺铈多组分硅酸盐玻璃电子辐照着色研究

采用吸收光谱、电子顺磁共振谱和光致发光谱对掺Ce多组分硅酸盐玻璃K509在10 MeV电子辐照下的色心动力学进行了研究。结果表明, 电子辐照引起K509玻璃可见光透过率降低的色心类型为非桥氧空穴色心HC1和HC2。在剂量率一定的情况下, 色心浓度随总剂量的增大呈指数函数增大; 在总剂量一定的情况下, 色心浓度随剂量率增大呈指数函数减小。Ce³⁺荧光强度的变化表明辐照过程中Ce³⁺浓度与辐照总剂量负相关, 与辐照剂量率正相关, 验证了掺Ce玻璃耐辐照机理: Ce³⁺吸收辐照产生的空穴从而抑制空穴色心HC1和HC2的形成, 且不引入额外的可见光波段吸收。通过对Ce³⁺宽带荧光峰进行高斯拟合, 得到了K509中Ce³⁺能级结构图。     

Improved video-based eye-gaze detection method

Recently, some video-based eye-gaze detection methods used in eye-slaved support systems for the severely disabled have been studied. In these methods, infrared light was irradiated to an eye, two feature areas (the corneal reflection light and pupil) were detected in the image obtained from a video camera and then the eye-gaze direction was determined by the relative positions between the two. However, there were problems concerning stable pupil detection under various room light conditions. In this paper, methods for precisely detecting the two feature areas are consistently mentioned. First, a pupil detection technique using two light sources and the image difference method is proposed. Second, for users wearing eye glasses, a method for eliminating the images of the light sources reflected in the glass lens is proposed. The effectiveness of these proposed methods is demonstrated by using an imaging board. Finally, the feasibility of implementing hardware for the proposed methods in real time is discussed     

Synthetic complex superresolving pupil filter based on double-beam phase modulation

To take advantage of phase-only filters to reduce reflected stray light, two phase plates are used in a synthetic complex superresolving pupil filter to get a small spot for laser direct writing. The amplitude modulation in a conventional complex superresolving pupil filter (CCSPF) is substituted by an equivalent phase modulation. The equivalence between the proposed filter and a CCSPF is established for a general design. The effectiveness of the proposed filter was proven through experiments to obtain a small main lobe width of 0.86 times the size of the airy spot.     

高速窄带多光谱成像系统光谱重建技术研究

光谱成像技术可以同时从光谱维和空间维上获取被测目标的信息，即结合了空间成像系统和光谱检测系统的功能，因此近年在影像获取与处理领域中倍受重视。本论文基于窄带多光谱成像技术建立八通道CCD多光谱成像系统，它能够实时采集八个通道的图像，获得波长分布从可见到红外（420-940nm）八个波段的光谱响应值。在此基础上对图像进行位置配准、反射率定标、采用插值算法获得其它波段光谱响应值，最终能够获取图像中任意一点的光谱反射率及颜色参数。实验结果表明，本文使用的三次样条插值法对原始光谱图像进行平滑操作的方法是有效的，能够以一定精度模拟出目标物点的真实光谱特性。该系统在动态目标检测识别、艺术品评价复制等领域有着广阔的应用前景。