Effects of iodine intercalation into Bi-based copper oxide superconductors

We have investigated the stage-1 iodine-intercalation compounds, whose host materials are Bi₂Sr₂Ca_1–x Y _x Cu₂O₈ (Bi-2212 phase) and Bi_1.6Pb_0.5Sr_1.9–x La _x Cu_1.05O₆ (Bi-2201 phase) with variousx values. In the Bi-2212 phase, it has been found that the change inT _c through the stage-1 iodine intercalation is due to two effects; a change of the two-dimensionality and an increase in the carrier number. The former effect decreasesT _c by about 10 K independent of the carrier number of the host sample. The latter effect shifts thex dependence ofT _c to largerx values by about 0.08, taking account of oxygen release from the host samples during the intercalation process. This result is clear evidence for the occurrence of both the change of two-dimensionality and the increase in carrier number about 0.04 per CuO₂ unit due to the charge transfer through the stage-1 iodine intercalation. In the Bi-2201 phase,T _c decreases by about 10 K through the stage-1 iodine intercalation.     

Some physical properties and Vickers hardness measurements of Fe diffusion-doped Bi<Subscript>1.8</Subscript>Pb<Subscript>0.35</Subscript>Sr<Subscript>1.9</Subscript>Ca<Subscript>2.1</Subscript>Cu<Subscript>3</Subscript>O<Subscript>y</Subscript> superconductors

In this study we have investigated the influence of iron diffusion and diffusion-annealing time on the mechanical and the superconducting properties of bulk Bi_1.8Pb_0.35Sr_1.9Ca_2.1Cu₃O_y superconductors by performing X-ray diffraction (XRD), scanning electron microscopy (SEM), Vickers hardness, dc resistivity (ρ-T) and critical current density (J_c) measurements. The samples are prepared by the conventional solid-state reaction method. Doping of Bi-2223 was carried out by means of iron diffusion during sintering from an evaporated iron film on pellets. Then, the Fe layered superconducting samples were annealed at 830 °C for 10, 30 and 60 h. The mechanical properties of the compounds have been investigated by measuring the Vickers hardness (H_v). The mechanical properties of the samples were found to be load dependent. The load independent Vickers hardness (H₀), Young’s modulus (E), yield strength (Y), and fracture toughness (K_IC) values of the samples are calculated. These all measurements showed that the values of the Vickers hardness, critical current density, and critical transition temperature and lattice parameter c increased with increasing Fe doping and diffusion-annealing time.     

Improving the Physical Properties of (Bi,Pb)-2223 Phase by SnO<Subscript>2</Subscript> Nano-particles Addition

In this work, the effect of SnO₂ nano-particles (40 nm) addition to the physical properties of Bi_1.6Pb_0.4Sr₂Ca₂Cu₃O_10+δ superconducting phase was studied. (Bi, Pb)-2223 superconductor phase added by SnO₂ nano-particles was prepared by a conventional solid-state reaction technique. The SnO₂ nano-particles concentrations x varied from 0.0 to 2.0 wt% of the sample’s total mass. The prepared samples were investigated by X-ray powder diffraction (XRD), scanning electron microscope (SEM) and electron dispersive spectroscopy (EDS) for analyzing phase formation and microstructure. Also, the electrical resistivity and transport critical current density, for investigated samples, were measured by standard dc four-probe method. Phase examination by XRD indicated that SnO₂ nano-particles enhanced the (Bi, Pb)-2223 phase formation up to x=0.4 wt%. On the other hand, the high concentrations of SnO₂ nano-particles retarded the phase formation. Granular investigation, from scanning electron microscope, showed that both number and size of voids decreased as x increased from 0.0 to 0.4 wt%. The superconducting transition temperature and transport critical current density were found to have optimal values at x=0.4 wt%. The enhancement rates in T _c and J _c were 12 and 58%, respectively, which had a maximum enhancement in both J _c and T _c for all investigated nano-particles.     

Role of lead in the growth of the highT c phase in the Bi2−x Pb x Sr2Ca2Cu3O y systems

Bi_2−x Pb _x Sr₂Ca₂Cu₃O _y superconducting samples with 0<x<0·3 have been synthesized and characterized using X-ray powder diffraction.T _c and superconducting volume fraction have been measured using a.c. magnetic susceptibility, d.c. electrical resistivity as well as X-band microwave surface resistance in the normal state. The data indicate the growth of the highT _c (2223) phase with corresponding reduction of the lowT _c (2122) phase with increasingx, up to 0·25. Beyond this value ofx there is a slight deterioration of the superconducting behaviour.     

Superconducting Properties of B<Subscript>2</Subscript>O<Subscript>3</Subscript>-Added (Bi,Pb)-2223 HTSs Prepared on Alumina Plates

Nominally pure and B₂O₃-added (Bi,Pb)-2223 HTS samples were synthesized in air on alumina plates. The influence of boron-doping as well as annealing conditions on the high-T _c 2223 phase evolution was studied using X-ray diffraction (XRD), resistivity and AC susceptibility measurements. The B₂O₃-added samples with starting composition Bi_1.7Pb_0.3Ca₂Sr₂Cu₃B _x O _y (x=0.05 and 0.5) reveal significant enhancement of 2223 phase formation compared to the undoped sample. Higher-level boron doping x=1.5 leads to the degradation of high-T _c 2223 phase.     

Structural and Physical Properties of Nd Substituted Bismuth Cuprates Bi1.7 Pb0.3−x Nd x Sr2Ca3Cu4O12+y

BiPb-2234 bulk samples with nominal composition of the compound Bi_1.7Pb_0.3−x Nd _x Sr₂Ca₃Cu₄O_12+y (BSCCO) (0.025≤x≤0.10) have been prepared by the melt-quenching method. The effects of Nd substitution on the BSCCO system have been investigated by electrical resistance (R–T), scanning electron microscopy (SEM), X-ray diffraction (XRD) and magnetic hysteresis measurements. It has been the BSCCO (2212) low-T _c phase is formed for all the substitution levels, together with the BSCCO (2223) high-T _c phase. The results obtained suggest that with increasing Nd³⁺ doping for Pb²⁺ the (2223) phase existing in undoped BSCCO gradually transforms into the (2212) phase and hence all of the samples have a mixed phase formation. The R–T result of the samples show two-step resistance transition; first transition occurs at 100 K and second in an interval of 80–90 K, depending on the Nd concentration. We have found that the magnetization decreases with increasing temperature in agreement with the general characteristic of the high-T _c materials. The samples exhibit weak field dependence particularly after 2 T and changes on the magnetic hysteresis, M–H curve rather small compared to the conventional superconducting materials. The maximum critical current density, J _c, value was calculated to be 8.51×10⁵ at 4.2 K and J _c decreases with increasing temperature and the substitution level.      

Enhanced Superconducting Properties of Air-Processed GdBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7-δ</Subscript> Single Domains with BaCO<Subscript>3</Subscript>/BaCuO<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript> Addition

Single domain GdBa₂Cu_7-δ (Gd123) bulk superconductors were fabricated in air by top-seeding melt-texture growth. Performance of the air-processed Gd123 was successfully enhanced by addition of both BaCO₃ and BaCuO_2−x , which suppress the formation of Gd_1+x Ba_2−x Cu₃O_7-δ solid solutions. The optimum doping amount ranges from 0.05 to 0.15, M BaCO₃ and 0.05 to 0.1, M BaCuO_2−x per molar Gd123. The distribution of the second phase particles was observed by scanning electron microscopy. A narrow band formed by Gd₂BaCuO₅ particle concentration appeared around the seeding zone in both a–b plane and c-growth sector in Gd123 single grain. Trapped magnetic field density reached 0.67, T for sample with 24 mm in diameter and 8, mm in thickness and a high critical current density J _c up to 91,200, A/cm² was achieved at 77, K under self-field.     

Nano Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Induced Fluxoid Jumps and Low Field Enhanced Critical Current Density in MgB<Subscript>2</Subscript> Superconductor

Nano particle of Fe₃O₄ (nFe₃O₄) up to 6 at% were doped in the superconducting MgB₂ samples. Despite the strong ferromagnetic nature of Fe₃O₄, both the ac susceptibility and the resistivity measurements show that up to 4 at% of Fe₃O₄, T _c =38 K is not changed, whereas for 6% T _c decreases by 6 K. This indicates that a low concentration of Fe does not substitute either the Mg or B sites and probably occupies the intergrain spaces. For 0.5% doped Fe₃O₄, an increase in J _c with respect to the pure MgB₂ samples is observed in the lower field and temperature regions (H<2 T and 20 K) indicating an enhanced flux pinning and the magnetic activation, i.e., the interaction between the magnetic dipole of Fe ion and the vortices is weak in comparison to the effective pinning potential. Whereas, at H>2 T, J _c of the doped samples is always less than that of MgB₂, and the activation is dominant in comparison with the effective pinning potential provided by the doping. Flux jumps are observed in lower T and H regions for the samples doped up to 1% nFe₃O₄ only. Magnetization plots of higher Fe content samples exhibited clear paramagnetic background. Mossbauer measurements for the higher (4, 6 at%) nFe₃O₄ doped MgB₂ samples show that at RT, the hyperfine field for both samples is ∼100 kOe and ∼120 kOe at 90 K. This means that the nFe₃O₄ particles decompose and form possibly an intermetallic Fe-B phase in the matrix.     

Doping of Bi-Sr-Ca-Cu-O Compounds with Mn

Formation of the superconducting phases Bi-2212 and Bi-2223 has been studied for samples with nominal composition Bi_aPb_bMn_cSr₄Ca₅Cu₇O _x (a + b + c = 4). The influence of the stoichiometric replacement of Bi and/or Pb by Mn on the electric and magnetic properties of the Bi-based superconductors has been studied. The partial substitution of Mn for Bi in the samples without Pb did not promote the growth of the Bi-2223 phase. The samples with double substitution Pb-Mn for Bi revealed a large amount of the Bi-2223 phase.     

Enhanced Critical Current Properties of MgB<Subscript>2</Subscript> Bulks by Doping Amorphous Carbon Containing Magnetic Impurity

The doping effect of amorphous carbon (C) containing magnetic impurity in MgB₂ bulk has been studied. Structural characterization by means of X-ray diffraction and the superconducting transition temperature, T _c , measurement indicate that little C effectively enters the MgB₂ structure. This should be due to the lower sintering temperature. The upper critical field, H _c2, and irreversibility field, H _irr, of samples show no systematic evolution with C doping. However, critical current density J _c (H) performance is greatly improved with C doping at 4, 15, and 28 K, respectively. Corresponding to this case, scanning electron microscope (SEM) image indicates that the grain size in samples becomes very small and grain boundary is developing roundness with the increasing of C content. This should be intimately related with the increase of magnetic impurity along with C doping. The result is discussed.      

Epitaxial Growth of CeO<Subscript>2</Subscript>/YSZ/CeO<Subscript>2</Subscript> Buffer Layers on Textured Ni Substrates for YBCO Conductors

CeO₂/YSZ/CeO₂ buffer layers were deposited on textured Ni substrates byin situ pulsed laser deposition. The out-of-plane texture and in-plane texture of the buffer layers were characterized by X-ray diffraction ω-scans and ϕ-scans. Using this CeO₂/YSZ/CeO₂ architecture as the buffer layers, high quality YBCO films with a zero-resistanceT _c about 90 K and a self-field critical current densitiesJ _c above 10⁶ A/cm² at 77 K can be obtained on Ni substrates.     

Effects of TiO2 addition on the superconducting properties of Bi-Sr-Ca-Cu-O system

The effects of TiO₂ addition in Bi₂Sr₂CaCu₂O₈Ti_y (Bi-2212) with y = 0, 0.05, 0.10 and 0.15 and (Bi_1.6Pb_0.4)Sr_1.6Ca₂Cu_2.8O₁₀Ti_y (Bi-2223) with y = 0, 0.10,0.20 and 0.40 are studied and compared. The samples have been investigated by powder X-ray diffraction (XRD), dc electrical resistance, critical current density (J_c) and scanning electron microscopy (SEM). The XRD patterns of the Bi₂Sr₂CaCu₂O₈Ti_y materials showed the Bi-2212 as the dominant phase. In the TiO₂ added samples (with x = 0.05 and 0.1), the c lattice parameter decreased slightly from the non-added sample showing the possibility of Ti incorporating into the crystal structure of the Bi-2212 phase. In the undoped (Bi_1.6Pb_0.4)Sr_1.6Ca₂Cu_2.8O₁₀ material, the XRD pattern showed the existence of mixed phases of Bi-2223 and Bi-2212. The TiO₂ added Bi-2223 samples do not show any systematic variation in the c lattice parameter, indicating that Ti may not be incorporated into the Bi-2223 crystal structure. The T_c values in both systems decreased with the addition of TiO₂. The critical current densities, J_c at 40 K in the Bi₂Sr₂CaCu₂O₈ system and at 77 K in the (Bi_1.6Pb_0.4)Sr_1.6Ca₂Cu_2.8O₁₀ system also decreased with the addition of TiO₂. SEM micrographs of both systems showed a slight decrease in average grain size when TiO₂ was added.     

Thermodynamic and Magnetic Properties of Superconductors with Anisotropic Energy Spectrum,MgB<Subscript>2</Subscript>

The behavior of the superconducting transition temperature T _c and that of the jump of electron heat capacity (C _S −C _N )/C _N of the compound MgB₂ at T=T _c with substitution of boron and magnesium atoms by other atoms from the periodic table of the elements, corresponding to introduction of additional electrons or holes in this compound are researched. The microscopic superconductivity theory in MgB₂ systems in the magnetic field parallel to the crystallographic axis (H ‖ c) is built. The magnitude of the upper critical field H _c2 is determined and its temperature dependence in two-band systems with different and identical topologies of Fermi surface cavities of the corresponding bands is studied. The obtained results and their comparisons with the experimental data demonstrate that all kinds of anomalies of the physical properties of the compound MgB₂ are effectively described by the two-band model.     

The Effects of Mg Substitution in Bi-2223 Superconductors

The effects of Mg substitution in Bi-2223 superconductor system has been studied for the Bi_1.7Pb_0.3Sr₂Ca₂Cu_3−x Mg _x O _y nominal composition (x=0.00, 0.05, 0.10, 0.15 and 0.20) which was prepared by the conventional solid-state reaction. The properties of these compounds have been investigated by measuring the electrical resistivity, X-ray diffraction (XRD) and density. Also, scanning electron microscopy (SEM) was employed to investigate the surface microstructure of the samples. It has been found that the effects of Mg substitution support the development of both the Bi-2212 and Bi-2223 phases. These measurements and analyses enable us to discuss the effects of Mg dopant on superconducting properties. We found that onset critical temperatures (T _c, onset) decrease with addition x>0.10 in resistivity measurements. The presence of Mg influenced the microstructure of the samples and decreased the mean grain size of Bi-2223 grains up to x=0.10.     

The Effects of Substitution of Sn for Cu in Bi1.75Pb0.25Sr2CaCu2.3?xSnxSnxOy

The influence of Sn doping on superconductivity in the Bi-based 2212 phase is studied in this paper. For the samples R–T relations and magnetic hysteresis loops were measured. X-ray powder diffraction analysis was also performed. For Bi_1.75Pb_0.25Sr₂CaCu_2.3–x Sn _x O _y , the experimental results show that by adding the proper amount of Sn the superconductivity of the samples can be improved. As x = 0.15, the critical temperature T _c, the critical current density J _c, and the magnetic pinning force density F reach a maximum. At T = 11 K, the critical state parameters H _c1, H _c2, , , and are calculated and compared with the results reported by other researchers. The experimental results also show that the Sn doping is able to speed up the growth of the 2223 phase. In brief, Sn doping is an effective way of improving the superconductivity in Bi-based superconductors.     

Microstructure controls and their effects on the properties of Bi2Sr2Ca1Cu2Ox superconductors

This paper reports our recent progresses in the development of Bi₂Sr₂Ca₁Cu₂O _x /Ag tape conductors for the applications of magnetic field generation in liquid helium or around 20 K, using a refrigerator. We have carried out extensive work to optimize the processing parameters, investigating the relationship between the microstructure and transportJ _c. We have found that the partial melting in oxygen atmosphere is effective to have large transportJ _c with good reproducibility. The pre-annealing and intermediate rolling (PAIR) process has been successfully applied to the multilayer conductors to improve the grain alignment and transportJ _c. TheJ _c of 5×10⁵A/cm² at 4·2 K and 10 T has been achieved, which is the highest value reported so far. Two magnets fabricated by using different types of Bi-2212/Ag conductors were tested. One is a magnet designed as an insert magnet for a 18 T-class large bore Nb-Ti/Nb₃Sn superconducting magnet. The conductor of this magnet was multifilamentary tape processed by powder-in-tube method. TheI _c was 98 A in the backup field of 18 T, which generated the self field of 1·79 T. A large pancake coil was fabricated with multilayer conductor and tested under the operation of cryocooler system. The coil was stably operated up to theJ _c of the coil at the temperatures below 30 K.     

On the synthesis and structure of single-phase (Bi,Pb)2Ca2Sr2Cu3O10

We report an elegant method for the synthesis of single-phase Bi-2223 superconductor from a stoichiometric composition Bi_1.7Pb_0.3Ca₂Sr₂Cu₃O_y by a matrix reaction route. The superconducting transition temperatureT _c (R=0) of this single-phase compound is 120 K. The effect of Pb-content and sintering temperature on the formation and stability of Bi-2223 phase is described.     

Effect of Cd Addition on Superconducting Fluctuations and Mechanical Properties of Bi1.82Pb0.36Sr2Ca2Cd x Cu3O y System

A study was made of the effect of Cd additions on the superconducting and mechanical properties of Bi_1.82Pb_0.36Sr₂Ca₂ Cd_xCu₃O_y (x = 0.0, 0.15, 0.25, 0.35 and 0.55). Characterization of the Cd-samples using XRD, DTA, and SEM techniques, has confirmed that remarkably formation of low-T _c phase (2212) by the addition of Cd up to 0.35. High-resolution electrical resistivity ρ (T) data on the composition of Cd = 0.35 have been taken for investigating critically the superconducting fluctuations. Using the Aslamazov and Larkin (AL) and Lawrence and Doniach (LD) models of excess conductivity. Excess conductivity analysis shows that this composition (Cd = 0.35) is 2D in the temperature range 137.8–163.7 K and a 3D one below 137.8 K. Thus, a crossover from 2D to 3D is observed at 137.8 K. Sample microhardness and density are greatly improved by Cd-additions (0.35). This trend is probably due to the intercalation of cadmium between superconducting grains in compositions may provide a plastic-flow region that allows relaxation of undesirable stresses resulting from the grain anisotropy of superconductors.     

Effect of Nb addition on magnetic,structural and superconducting properties of (Bi,Pb)-2223 superconductors

In this work, the effects of Nb₂O₅ addition with different ratios on the structural and magnetic properties of Bi_1.7?xPb_0.3Nb_xSr₂Ca₂Cu₃O_y (x = 0.00–0.20) superconducting samples were investigated. (Bi, Pb)-2223 superconducting samples were prepared by conventional solid-state reaction method. The phase formation, phase fraction and lattice parameters were determined from X-ray powder diffraction (XRD) measurements, the microstructure, surface morphology analyses of the samples were carried out using scanning electron microscope (SEM). Additionally, ac susceptibility measurements were done in order to determine the critical current density (J_c) and hole concentration (p) of the samples. AC susceptibility measurements were done at various ac fields (ranging from 20 to 160 A/m) to understand the effect of Nb addition on magnetic properties of Bi_1.7?xPb_0.3Nb_xSr₂Ca₂Cu₃O_y superconductor. Critical onset (T _c ^on ) and loss peak temperatures (T_p) were estimated from the ac susceptibility curves. It was observed from ac susceptibility measurements that the critical onset temperatures decreased from about 108–98 K with increasing Nb addition (x = 0.00–0.20). The imaginary part of susceptibility was used to calculate the intergranular critical current density (J_c) by means of the Bean’s model. X-ray diffraction analysis revealed that the samples consisted of a mixture of Bi-2223 and Bi-2212 phases as the major constituents and non-superconducting phase Ca₂PbO₄ as the minor. It was also shown from XRD measurements that volume fraction of high-T_c phase decreases with increasing Nb addition up to x = 0.20. The sample with Nb addition of x = 0.20 showed the highest volume fraction of Bi-2223 phase (86 %). When Nb addition was increased, the surface morphology and grain connectivity are found to degrade, the grain sizes decrease and porosity of the samples were observed to increase from SEM images except the sample with x = 0.20 Nb addition.