A poly(4-vinylpyridine) derivative bearing Os(5,6-dmphen)2Cl (5,6-dmphen=5,6-dimethyl-1,10-phenanthroline): a novel electrochemical indicator for detecting DNA hybridization

A poly(4-vinylpyridine) (PVP) derivative bearing a redox active osmium (Os) complex, Os(5,6-dmphen)₂Cl-PVP, shows a selective binding to double-helical DNA chains, enabling the electrochemical determination of DNA in a picomolar level.     

DNA biosensor for detection of Helicobacter pylori using phen-dione as the electrochemically active ligand in osmium complexes

A surface-based method for the study of the interactions of DNA with redox-active 1,10-phenantroline-5,6-dione (phen-dione) osmium complexes is described. The study was carried out using gold electrodes modified with DNA via adsorption and [Os(bpy)(2)(phe-dione)](3+/2+) (bpy = 2,2'-bipyridyl) or [Os(phen)(2)(phen-dione)](3+/2+) (phen = 1,10-phenantroline) as electrochemical reported molecules. The method, which is simple and reagent-saving, allows the accumulation of osmium complexes within the DNA layer. The amount of osmium complex bound by the adsorbed layer of DNA was determined from the voltammetric charge associated with the osmium redox process of the immobilized metal complex. The quinone moiety of the phen-dione ligand was useful as an indicator for electrochemical DNA sensing because of its redox response at low potentials. A thiol-linked single-stranded Helicobacter pylori DNA probe was immobilized, through S-Au bonds on to a gold electrode (density of modification 86 pmol/cm(2)). Following hybridization with the complementary DNA sequence, the osmium complex was electrochemically accumulated within the double-stranded DNA layer. Electrochemical detection was performed by differential pulse voltammetry over the potential range where the quinone moiety was redox active (i.e., at very low potentials, -0.020 V vs SSCE); with this approach, a sequence of the H. pylori could be quantified over the range from 5 to 20 pmol with a linear correlation of r = 0.9888 and a detection limit of approximately 6 pmol.     

Real-Time Electrochemical PCR with a DNA Intercalating Redox Probe

The proof-of-principle of a nonoptical real-time PCR method based on the electrochemical monitoring of a DNA intercalating redox probe that becomes considerably less easily electrochemically detectable once intercalated to the amplified double-stranded DNA is demonstrated. This has been made possible thanks to the finding of a redox intercalator that (i) strongly and specifically binds to the amplified double-stranded DNA, (ii) does not significantly inhibit PCR, (iii) is chemically stable under PCR cycling, and (iv) is sensitively detected by square wave voltammetry during PCR cycling. Among the different DNA intercalating redox probes that we have investigated, namely, methylene blue, Os[(bpy)(2)phen](2+), Os[(bpy)(2)DPPZ](2+), Os[(4,4'-dimethyl-bpy)(2)DPPZ](2+) and Os[(4,4'-diamino-bpy)(2)DPPZ](2+) (with bpy = 2,2'-bipyridine, phen = phenanthroline, and DPPZ = dipyrido[3,2-a:2',3'-c]phenazine), the one and only compound with which it has been possible to demonstrate the proof-of-concept is the Os[(bpy)(2)DPPZ](2+). In terms of analytical performances, the methodology described here compares well with optical-based real-time PCRs, offering finally the same advantages than the popular and routinely used SYBR Green-based real-time fluorescent PCR, but with the additional incomes of being potentially much cheaper and easier to integrate in a hand-held miniaturized device.     

Electron-transfer studies with a new flavin adenine dinucleotide dependent glucose dehydrogenase and osmium polymers of different redox potentials

A new extracellular flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase from Glomerella cingulata (GcGDH) was electrochemically studied as a recognition element in glucose biosensors. The redox enzyme was recombinantly produced in Pichia pastoris and homogeneously purified, and its glucose-oxidizing properties on spectrographic graphite electrodes were investigated. Six different Os polymers, the redox potentials of which ranged in a broad potential window between +15 and +489 mV versus the normal hydrogen electrode (NHE), were used to immobilize and "wire" GcGDH to the spectrographic graphite electrode's surface. The GcGDH/Os polymer modified electrodes were evaluated by chronoamperometry using flow injection analysis. The current response was investigated using a stepwisely increased applied potential. It was observed that the ratio of GcGDH/Os polymer and the overall loading of the enzyme electrode significantly affect the performance of the enzyme electrode for glucose oxidation. The best-suited Os polymer [Os(4,4'-dimethyl-2,2'-bipyridine)(2)(PVI)Cl](+) had a potential of +309 mV versus NHE, and the optimum GcGDH/Os polymer ratio was 1:2 yielding a maximum current density of 493 μA·cm(-2) at a 30 mM glucose concentration.     

Luminescence-Based Spectroelectrochemical Sensor for [Tc(dmpe)(3)](2+/+) (dmpe = 1,2-bis(dimethylphosphino)ethane) within a Charge-Selective Polymer Film

A spectroelectrochemical sensor consisting of an indium tin oxide (ITO) optically transparent electrode (OTE) coated with a thin film of partially sulfonated polystyrene-blockpoly(ethylene-ran-butylene)-block-polystyrene (SSEBS) was developed for [Tc(dmpe)(3)](+) (dmpe = 1,2-bis(dimethylphosphino)ethane). [Tc(dmpe)(3)](+) was preconcentrated by ion-exchange into the SSEBS film after a 20 min exposure to aqueous [Tc(dmpe)(3)](+) solution, resulting in a 14-fold increase in cathodic peak current compared to a bare OTE. Colorless [Tc(dmpe)(3)](+) was reversibly oxidized to colored [Tc(dmpe)(3)](2+) by cyclic voltammetry. Detection of [Tc(dmpe)(3)](2+) was accomplished through emission spectroscopy by electrochemically oxidizing the complex from nonemissive [Tc(dmpe)(3)](+) to emissive [Tc(dmpe)(3)](2+). The working principle of the sensor consisted of electrochemically cycling between nonemissive [Tc(dmpe)(3)](+) and emissive [Tc(dmpe)(3)](2+) and monitoring the modulated emission (λ(exc) = 532 nm; λ(em) = 660 nm). The sensor gave a linear response over the concentration range of 0.16-340.0 μM of [Tc(dmpe)(3)](2+/+) in aqueous phase with a detection limit of 24 nM.     

PVC-Based Mn(III) Porphyrin Membrane-Coated Graphite Electrode for Determination of Histidine

The construction, performance characteristics, and application of a polymeric membrane coated on a graphite electrode with unique selectivity toward histidine are reported. The electrode was prepared by incorporating chloro(5,10,15,20-tetraphenylporphyrinato) manganese(III) [Mn(TPP)Cl] into a plasticized poly(vinyl chloride) membrane. The influences of membrane composition, pH, and foreign ions were investigated. Calibration plots with near Nernstian slopes for histidine were observed, -55.4 mV/decade, over a linear range of four decades of concentration (1 × 10(-)(5) to 1 × 10(-)(1) M). The electrode has a detection limit of 5 × 10(-)(6) M histidine and shows a fast response time of about 1 min. The electrode shows high selectivities toward histidine over several amino acids and common inorganic anions.     

Reagentless mediated laccase electrode for the detection of enzyme modulators

We have investigated aerobic mediation of electron transfer to a laccase enzyme by the solution redox couples [Os(bpy)(2)Cl(2)](+/0) and [Os(bpy)(2)(MeIm)Cl](2+/+), where bpy is 2,2-bipyridine and MeIm is N-methylimidazole. The factors that influence the homogeneous mediation reaction are investigated and discussed. Investigation of ionic strength, pH, and temperature effects on the kinetics of intermolecular electron transfer elucidates the governing factors in the mediator-enzyme reactions. Coimmobilization of both enzyme and an osmium redox mediator in a hydrogel on glassy carbon electrodes results in a biosensor for the reagentless addressing of enzyme activity, consuming only oxygen present in solution. Thus, these immobilized enzyme biosensors can be utilized for the detection of modulators of laccase activity, such as the inhibitor sodium azide. The enzyme inhibition biosensor can detect levels of azide as low as 2.5 × 10(-6) mol dm(-3) in solution.     

DNA sensor with a dipyridophenazine complex of osmium(lI) as an electrochemical probe

Application of a dipyrido[3,2-a:2',3'-c]phenazine (DPPZ)-type metal complex as an DNA electrochemical probe was studied. The introduction of electron-donating groups (NH2) was effective for controlling the redox potential and binding affinities of the DPPZ-type osmium complex. The [Os(DA-bpy)2DPPZ]2+ complex (DA-bpy; 4,4'-diamino-2,2'-bipyridine) had a lower half-wave potential (E 1/2) of 147 mV (vs Ag/AgCl) and higher binding affinity with DNA (binding constant, K = 3.1 x 10(7) M(-1)) than those of other complexes. With a single-stranded DNA immobilized gold electrode, the hybridization signal (deltaI) of the [Os(DA-bpy)2DPPZ]2+ complex was linear in the concentration range of 1.0 pg mL(-1) - 0.12 microg mL(-1) for the targeted DNA with a regression coefficient of 0.999. The detection limit was 0. 1 pg mL(-1). The 400-bp yAL3 gene was also detected with good sensitivity and selectivity using the [Os(DA-bpy)2DPPZ]2+ complex.     

Voltammetric sensor for oxidized DNA using ultrathin films of osmium and ruthenium metallopolymers

Films containing [Os(bpy)2(PVP)10Cl]+ and [Ru(bpy)2(PVP)10Cl]+ metallopolymers were assembled layer by layer on pyrolytic graphite electrodes to make sensors that selectively detect oxidized DNA. These films showed reversible, independent electrochemistry for electroactive Os3+/Os2+ and Ru3+/Ru2+ centers, with formal potentials of 0.34 and 0.76 V vs SCE, respectively. The combination of ruthenium and osmium metallopolymers in the films provided a catalytic Os square wave voltammetry (SWV) peak that is mainly selective for 8-oxoguanine and the detection of other oxidized nucleobases from the Ru peak. The method is applicable to measurements on DNA in solution or DNA incorporated into films. Using the Os SWV peak, 1 oxidized nucleobase in 6000 was detected. The sensor is simple and inexpensive, and the approach may be useful for the detection of oxidized DNA as a clinical biomarker for oxidative stress.     

Application of some recently synthesized 9, 10-anthraquinone derivatives as new class of ionophores responsive to lead (II) ion

Lead-selective solvent polymeric membrane electrodes, based on some recently synthesized 9, 10-anthraquinone derivatives, are described. The electrode exhibits a good Nernstian response for Pb (II) ions over a wide concentration range of 1.0/spl times/10/sup -6/-1.0/spl times/10/sup -2/ M with a slope of 28.9 mV decade/sup -1/. The potential-pH profile of membrane based on 1-hydroxy-2-({2-[2-(2-hydroxyethoxy)ethoxy]ethoxy}methyl)anthra-9, 10-quinone (A/sub 3/) demonstrated a lack of H/sup +/ interference within a wide pH range (1.5-6.8). The detection limit is 6.7/spl times/10/sup -7/ M. The developed sensor has a very short response time (2.0 s), and it can be used as a working electrode in a flow injection system. The lifetime of the proposed sensor is 120 days (without any considerable divergence in potentials) with good reproducibility (SD=/spl plusmn/0.1 mV). The proposed sensor revealed good selectivity for Pb (II) over a wide variety of other metal ions. It can be used as an indicator electrode in the potentiometric titration of lead ions, with EDTA, oxalate, chromate, and hydroxide ions, and in direct determination of lead in a wastewater sample.     

Detection of glucose at 2 fM concentration

We report the amperometric detection of glucose at 2 fM concentration in a physiological buffer solution at 1 atm O2 pressure. The sensitive assay is based on the close to absolute electroreductive stripping of O2 from the solution near the glucose electrooxidizing anode. The glucose was detected by its electrooxidation on a stationary glassy carbon disk surrounded by an also stationary platinum ring. The disk was coated with a film of glucose oxidase (GOx), electrically "wired" with PVP-[Os(N,N'-dimethyl-2,2'-biimidazole)3]2+/3+ (polymer I), having a redox potential of -0.19 V versus Ag/AgCl. The ring was coated with bilirubin oxidase (BOD) "wired" with PAA-PVI-[Os(4,4'-dichloro-2,2'-bipyridine)2Cl]+/2+ (polymer II), having a redox potential of + 0.36 V versus Ag/AgCl. The ring-disk electrode was held facing up, and a 30-microL drop was placed on it for the assay, with the ring poised at -0.3 V/ AgAgCl and the disk poised at -0.1 V/ Ag/AgCl. Even though the atmosphere over the drop was O2 at 1 atm pressure, the wired BOD disk scavenged the O2 so effectively that the glucose-reduced FADH2 of GOx was not oxidized by O2, the natural cosubstrate of the enzyme.     

O(2)-responsive chemical sensors based on hybrid xerogels that contain fluorinated precursors

We report the development and analytical figures of merit associated with several new O(2)-responsive sensor materials. These new sensing materials are formed by sequestering the luminophore tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) ([Ru(dpp)(3)](2+)) within hybrid xerogels that are composed of two of the following methoxysilanes: tetramethoxysilane, n-propyl-trimethoxysilane, 3,3,3-trifluoropropyl-trimethoxysilane, phenethyl-trimethoxysilane, and pentafluorophenylpropyl-trimethoxysilane. Steady-state and time-resolved luminescence measurements are used to investigate these hybrid xerogel-based sensor materials and elucidate the underlying reasons for the observed performance. The results show that many of the [Ru(dpp)(3)](2+)-doped composites form visually uniform, crack-free xerogel films that can be used to construct O(2) sensors that have linear calibration curves and excellent long-term stability. To the best of our knowledge, the [Ru(dpp)(3)](2+)-doped fluorinated hybrid xerogels also exhibit the highest O(2) sensitivity of any reported [Ru(dpp)(3)](2+)-based sensor platform.     

Preconcentration and Voltammetric Determination of Mercury(II) at a Chemically Modified Glassy Carbon Electrode

In this work, the organic compound 2-mercaptobenzimidazole was covalently bound on the surface of a glassy carbon rod, via silanization, yielding a material capable of selectively complexing Hg(2+) ions. This material was applied as an electrode for voltammetric determination of mercury(II) following its nonelectrolytic preconcentration. After exchanging the medium, the voltammetric measurements were carried out by anodic stripping in the differential pulse mode (pulse amplitude, 50 mV; scan rate, 1.25 mV s(-)(1)) using 10(-)(2) mol L(-)(1) NaSCN solution as supporting electrolyte. An anodic stripping peak was obtained at 0.06 V (vs SCE) by scanning the potential from -0.3 to +0.3 V. After a 5 min preconcentration period in a pH 4.0 Hg(2+) solution, this electrode shows increasing voltammetric response in the range 0.1-2.2 μg mL(-)(1), with a relative standard deviation of 5% and a practical detection limit of 0.1 μg mL(-)(1) (5.0 × 10(-)(7) mol dm(-)(3)). Compared with the conventional stripping approach, this chemically modified glassy carbon electrode procedure presented good discrimination against interference from Cu(II) in up to 10-fold molar excess.     

(Ba(x)La(1-x)(2))In(2)O(5+x) (0.4 < or = x < or = 0.6) electrolyte-supported mixed-potential CO sensors

The dense (Ba(x)La(1-x)(2))In(2)O(5+x) electrolytes with different compositions (x = 0.4, 0.5, 0.6) were synthesized by Pechini method. The obtained sintered (Ba(x)La(1-x)(2))In(2)O(5+x) electrolytes showed a high relative density of approximately 98%, and the major phase of three electrolyte compositions was indexed as a cubic phase. The CO sensing properties of as-fabricated planar-type (Ba(x)La(1-x)(2))In(2)O(5+x)-based sensors coupled with ITO and Pt as the sensing electrode and reference electrode, respectively, were investigated. The effects of factors such as gas flow rate, chemical compositions, and density of the electrolytes on the sensing performance were investigated. The sensors showed good sensitivity to different concentrations of CO from approximately 100 to approximately 500 ppm and excellent selectivity over low concentrations of methane (<500 ppm). Linear relationships between emf of the sensors and CO gas concentrations from approximately 100 to approximately 400 ppm were observed. However, the sensors indicated more sluggish response compared with the sensors coupled with a corresponding porous electrolyte. The probable reason has been discussed. The long-term stability of the sensor for the detection of CO was also investigated, which indicated a reasonably stable sensor signal after an initial decline during the incubation period.     

Determination of Dansyl Amino Acids and Oxalate by HPLC with Electrogenerated Chemiluminescence Detection Using Tris(2,2'-bipyridyl)ruthenium(II) in the Mobile Phase

A new electrogenerated chemiluminescence detection method is investigated for use in detection in reversed-phase and reversed-phase ion-pair HPLC with Ru(bpy)(3)(2+) in the mobile phase. In this method, different concentrations of Ru(bpy)(3)(2+) are dissolved in the mobile phase and the HPLC column flushed with the mobile phase for 1 h until the column is saturated with Ru(bpy)(3)(2+). The separated analytes along with Ru(bpy)(3)(2+) pass through an optical-electrochemical flow cell which has a dual platinum electrode held at a potential of 1250 mV vs a Ag/AgCl reference electrode. On the surface of the electrode, Ru(bpy)(3)(2+) is oxidized to Ru(bpy)(3)(3+) which reacts with the analytes to emit light. The retention times, retention orders, detection limits, and linearity in working curves are compared to those obtained with the conventional postcolumn Ru(bpy)(3)(2+) addition method. The retention times for dansyl amino acids with Ru(bpy)(3)(2+) in the mobile phase are longer than those obtained with the postcolumn addition approach. This may be caused by π-to-π interactions between the aromatic groups of the dansyl derivatives and the bipyridyl groups of Ru(bpy)(3)(2+) in the Ru(bpy)(3)(2+)-saturated reversed-phase column. Similarly, oxalate is separated from urine and blood plasma samples by reversed-phase ion-pair HPLC. Plasma samples are obtained using ultrafiltration to remove proteins from whole blood. Retention times for oxalate with the two detection techniques are identical, and detection limits for these techniques are compared.     

Electrogenerated chemiluminescence sensors using Ru(bpy)3(2+) doped in silica nanoparticles

A novel electrogenerated chemiluminescence (ECL) sensor based on Ru(bpy)3(2+)-doped silica (RuDS) nanoparticles conjugated with a biopolymer chitosan membrane was developed. These uniform RuDS nanoparticles (approximately 40 nm) were prepared by a water-in-oil microemulsion method and were characterized by electrochemical and transmission electron microscopy technology. The Ru(bpy)3(2+)-doped interior maintained its high ECL efficiency, while the exterior nanosilica prevented the luminophor from leaching out into the aqueous solution due to the electrostatic interaction. This is the first attempt to branch out the application of RuDS nanoparticles into the field of ECL, and since a large amount of Ru(bpy)3(2+) was immobilized three-dimensionally on the electrode, the Ru(bpy)3(2+) ECL signal could be enhanced greatly, which finally resulted in the increased sensitivity. This sensor shows a detection limit of 2.8 nM for tripropylamine, which is 3 orders of magnitude lower than that observed at a Nafion-based ECL sensor. Furthermore, the present ECL sensor displays outstanding long-term stability.     

Method for effective immobilization of Ru(bpy)(3)2+ on an electrode surface for solid-state electrochemiluminescene detection

A novel method for effective immobilization of Ru(bpy)3(2+) on an electrode surface is developed. The whole process involves two steps: the electrostatic interactions between citrate-capped gold nanoparticles (AuNPs) and Ru(bpy)3Cl2 in aqueous medium were used to fabricate Ru(bpy)(3)2+-AuNP aggregates (Ru-AuNPs) first, and then the Au-S interactions between as-formed Ru-AuNPs and sulfhydryl groups were used to effectively immobilize the Ru-AuNPs on a sulfhydryl-derivated indium tin oxide (ITO) electrode surface. As-prepared ITO electrode shows excellent stability, and the ECL active species Ru(bpy)3(2+) contained therein exhibit excellent ECL behaviors.     

Operation of a miniature redox hydrogel-based pyruvate sensor in undiluted deoxygenated calf serum

An amperometric sensor for the detection of pyruvate in biological fluids was formed by modifying the tip of a 0.25 mm gold wire with a layer of electrically "wired" recombinant pyruvate oxidase (POP). The sensor did not require O2 for its operation. The electroactive area of the tip of the microwire was increased by electrodeposition of platinum black. The POP was adsorbed on the platinum black and then "wired" with the cross-linked, subsequently deposited poly(4-vinylpyridine), part of the pyridine functions of which were complexed with [Os(bpy)2Cl](+/2+) and part quaternized with 2-bromoethylamine. In the resulting thin layer the POP was well "wired". When the electrode was poised at 0.4 V vs Ag/ AgCl, the sensitivity at pH 6 was 0.26 A cm(-2) M(-1) and the current increased linearly with the pyruvate concentration through the 2 x 10(-6) - 6 x 10(-4) M range. Thiamine diphosphate, flavin adenine dinucleotide, and MgCl2 were not required for the assay, but stabilized the stored enzyme electrode. Placement of a dialysis membrane (MWCO 3500) on the electrode alleviated the severe interference of ascorbate. In calf serum, the detection limit was 30 microM, suggesting that the electrode might be used in the continuous monitoring of pyruvate in hypoxic organs.     

Electrogenerated chemiluminescence from R(bpy)3(2+) ion-exchanged in carbon nanotube/perfluorosulfonated ionomer composite films

The electrochemistry and electrogenerated chemiluminescence (ECL) of ruthenium(II) tris(bipyridine) (Ru(bpy)(3)(2+)) ion-exchanged in carbon nanotube (CNT)/Nafion composite films were investigated with tripropylamine (TPA) as a coreactant at a glassy carbon (GC) electrode. The major goal of this work was to investigate and develop new materials and immobilization approaches for the fabrication of ECL-based sensors with improved sensitivity, reactivity, and long-term stability. Ru(bpy)(3)(2+) could be strongly incorporated into Nafion film, but the rate of charge transfer was relative slow and its stability was also problematic. The interfusion of CNT in Nafion resulted in a high peak current of Ru(bpy)(3)(2+) and high ECL intensity. The results indicated that the composite film had more open structures and a larger surface area allowing faster diffusion of Ru(bpy)(3)(2+) and that the CNT could adsorb Ru(bpy)(3)(2+) and also acted as conducting pathways to connect Ru(bpy)(3)(2+) sites to the electrode. In the present work, the sensitivity of the ECL system at the CNT/Nafion film-modified electrodes was more than 2 orders of magnitude higher than that observed at a silica/Nafion composite film-modified electrode and 3 orders of magnitude higher than that at pure Nafion films. The CNT/Nafion composite film-modified GC electrodes also exhibited long-term stability.     

PVC-Based 2,2,2-Cryptand Sensor for Zinc Ions

A PVC-based membrane of 2,2,2-cryptand exhibits a very good response for Zn(2+) in a wide concentration range (from 2.06 ppm to 6.54 × 10(3) ppm) with a slope of 22.0 mV/decade of Zn(2+) concentration. The response time of the sensor is <10 s, and the membrane can be used for more than 3 months without any observed divergence in potentials. The proposed sensor exhibits very good selectivity for Zn(2+) over other cations and can be used in a wide pH range (2.8-7.0). It has also been possible to use this assembly as an indicator electrode in potentiometric titrations involving zinc ions.