Synthesis and properties of new polymaleimides containing allyl groups

Two new polymaleimides containing allyl groups in their backbone were synthesized and characterized. The synthesis of these polymaleimides was carried out by reacting allyl polyamine with maleic anhydride. The monomers were characterized by infrared spectroscopy (IR), ¹³C-NMP, and elemental analysis. Differential Scanning Calorimetry (DSC) of monomers showed that the presence of allyl groups reduces the curing temperature. Thermogravimetric analysis (TGA) revealed that all polymers were stable up to 400°C in air or 500°C in nitrogen atmosphere. Their char yield at 800°C under anaerobic conditions was 58–61%.     

Synthesis and characterization of poly(amide–imide)s and their precursors as materials for membranes

Water soluble diamine amic acids (DAAs) were synthesized by reacting aliphatic diamines with pyromellitic dianhydride. Poly(amide–amic acid)s (PAAs) were prepared by interfacial polycondensation of DAAs in aqueous sodium hydroxide solution with isophthaloyl chloride in dichloromethane. Poly(amide–imide)s (PAIs) containing alternating (amide–amide)–(imide–imide) sequences were obtained by thermal cycloimidization of the PAA films at 175°C for 4 h in a forced air woven. The PAIs were readily soluble in polar aprotic solvents such as dimethylformamide, dimethylacetamide, dimethylsulfoxide, and N‐methyl‐2‐pyrrolidone. The inherent viscosities of the polymers are in the range of 0.97–1.7 dL/g. The polymers were characterized by IR, ¹H nuclear magnetic resonance (NMR), and thermogravimetric analysis (TGA). Thin film composite membranes containing PAA ultrathin barrier layer were prepared by in situ interfacial polycondensation of DAA in water with trimesoyl chloride or isophthaloyl chloride in hexane on the surface of a porous polysulfone membrane. The membranes were characterized for water permeability and for the separation of NaCl and Na₂SO₄. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1721–1727, 2000     

Novel poly(amide‐hydrazide)s and copoly(amide‐hydrazide)s from bis‐(4‐aminobenzyl) hydrazide and aromatic diacid chlorides: Synthesis and characterization

A new aromatic diamine, viz., bis‐(4‐aminobenzyl) hydrazide (BABH), which contains preformed hydrazide and methylene linkage, was synthesized starting from α‐tolunitrile. The BABH and intermediates involved in its synthesis were characterized by spectroscopic methods. Novel poly(amide‐hydrazide)s were synthesized by low temperature solution polycondensation of BABH with isophthaloyl chloride (IPC) and terephthaloyl chloride (TPC). Furthermore, two series of copoly(amide‐hydrazide)s, based on different mol % of BABH and bis‐(4‐aminophenyl) ether (ODA) with IPC/TPC were also synthesized. Poly(amide‐hydrazide)s and copoly(amide‐hydrazide)s were characterized by inherent viscosity [η_inh], FTIR, solubility, X‐ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The polycondensation proceeded smoothly and afforded the polymers with inherent viscosities in the range of 0.18–0.93 dL/g in (NMP + 4% LiCl) at 30°C ± 0.1°C. These polymers dissolved in DMAc, NMP or DMSO containing LiCl. The solubility of copolymers was considerably improved in line with less crystalline nature due to random placement of constituent monomers during the copolymerization. XRD data indicated that poly(amide‐hydrazide)s from BABH alone and IPC/TPC had higher crystallinity than the corresponding copoly(amide‐hydrazide)s derived from a mixture of BABH and bis‐(4‐aminophenyl) ether (ODA). Polymers showed initial weight loss around 160°C which is attributed to the cyclodehydration leading to the formation of corresponding poly(amide‐oxadiazole)s. Copolyamide‐hydrazides showed T_max between 400 and 540°C which is essentially the decomposition of poly(amide‐oxadiazole)s. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Crosslinked methyl methacrylate/ethylene glycol dimethacrylate polymer compounds with a macroazoinitiator

A silane‐containing diamine, bis(p‐aminophenoxy) diphenylsilane (BADPS), was prepared by the condensation of p‐aminophenol with dichlorodiphenyl silane in the presence of triethylamine. Then, BADPS was condensed with 4,4‐azobis(4‐cyanopentanoyl chloride) to prepare macroazoinitiators containing silane units (Si–MAIs). A series of poly(methyl methacrylate) gels containing silane were derived by the solution free‐radical crosslinking copolymerization of methyl methacrylate and ethylene glycol dimethacrylate monomers initiated by these macroazoinitiators at a total monomer concentration of 6 mol/L and 80°C. Si–MAIs were characterized with ¹H‐NMR and ¹³C‐NMR spectroscopy, and the structural characteristics of the gels were also examined. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

High temperature laminating resins based on maleimido end-capped pyromellitimide

A novel class of bismaleimides, biscitraconimides, and bisdichloromaleimides chain-extended by pyromellitimide was prepared and characterized by infrared and proton nuclear magnetic resonance spectroscopy. These polymer precursors were prepared by reacting maleic/citraconic/dichloromaleic anhydride (1 mol) with an equimolar amount of a diamine and subsequently with pyromellitic dianhydride (0.5 mol). The tetraamic acid formed was cyclodehydrated by chemical or thermal means. The curing behavior of polymer precursors was investigated by differential thermal analysis. Bismaleimide was thermally polymerized at a relatively higher temperature than the corresponding biscitraconimide and at lower temperature than bisdichloromaleimide. The curing temperature of monomers fluctuated between 209 and 318°C. Dynamic thermogravimetric analysis of the cured aromatic resins showed that they were approximately stable up to 370°C both in nitrogen and air. Their char yield was 53–63% at 800°C under anaerobic conditions. The relative thermal stability of the cured resins, with respect the diamine utilized for imidization, was of the order p-phenylenediamine > 4-aminophenyl ether > 4,4′-diaminodiphenylmethane > 4,4′-diaminodiphenylsulfone > hexamethylenediamine. In addition, the thermal and thermooxidative stability of polymers was ascertained by isothermal gravimetric analysis.     

Synthesis and characterization of cubane polyamides

Cubylamines and cubylmethylamines are of interest as antiviral agents. Reliable syntheses of some polyamides with cubane as the backbone of a polymer chain are described. Two monomers of cubane, cubane‐1,4‐dicarboxylic acid (CDA) and 1,4‐diaminocubane (DAC), are used. Polymerizations of DAC, 1,6‐hexamethylene diamine and 1,4‐diaminobenzene with cubane‐1,4‐dicarbonyl chloride, adipoyl chloride and terephthaloyl chloride to obtain polyamides are discussed. The polymers were characterized by FTIR, ¹H NMR and ¹³C NMR spectroscopies. Characterization of the prepared polyamides by TGA and DSC show a highly exothermic peak above 200 °C. Hydrolysis of polyamides containing DAC were carried out in dialysis bags containing an aqueous buffer solution (pH 8) at 37 °C. Detection of the hydrolysis product by UV spectroscopy showed that DAC was released by the hydrolysis of the amide bonds in the polymer chain. © 2000 Society of Chemical Industry     

Organosoluble asymmetric aromatic polyamides bearing pendent phenoxy groups

This study focuses on the synthesis and characterization of new polyamides based on an aromatic asymmetric diamine‐containing phenoxy‐substituted benzophenone segment. Low‐temperature solution polycondensation reactions of this diamine with various aromatic diacid chlorides containing ether, hexafluoroisopropylidene or diphenylsilane groups resulted in polyamides with molecular weights in the range 102 900–113 200 g mol^?1. The structures of these monomers and the corresponding polymers were fully confirmed using elemental analysis and infrared and NMR spectroscopy. All polyamides were easily soluble at room temperature in polar aprotic solvents and even in less polar solvents such as tetrahydrofuran. The polymers showed excellent thermal stability, up to 385 °C, and displayed glass transition temperatures in the range 225–256 °C. All the polymers presented blue florescence upon irradiation with UV light and thus show promise for applications in electroluminescent devices. Copyright © 2011 Society of Chemical Industry     

Thermally stable and organosoluble cardo binaphthylene based poly(amide imide)s and poly(ester imide)s

A new imide‐containing dicarboxylic acid based on a twisted binaphthylene unit, 2,2′‐bis(N‐trimellitoyl)‐1,1′‐binaphthyl (1), was synthesized from 1,1′‐binaphthyl‐2,2′‐diamine and trimellitic anhydride in glacial acetic acid. The structure of compound 1 was fully characterized with spectroscopic methods and elemental analysis. Series of thermally stable and organosoluble poly(amide imide)s (4a–4d) and poly(ester imide)s (5a–5d) with similar backbones were prepared by the triphenyl phosphite and diphenylchlorophosphate activated direct polycondensation of diimide dicarboxylic acid 1 with various aromatic diamines and diols, respectively. With due attention to the structural similarity of the resulting poly(amide imide)s and poly(ester imide)s, most of the differences between these two block copolyimides could be easily attributed to the presence of alternate amide or ester linkages accompanied by imide groups in the polymer backbone. The ultraviolet maximum wavelength values of the yellowish polymers were determined from their ultraviolet spectra. The crystallinity of these copolyimides was estimated by means of wide‐angle X‐ray diffraction, and the resultant polymers exhibited a nearly amorphous nature, except for the polymers derived from benzidine and 4,4′‐binaphthol. The poly(amide imide)s exhibited excellent solubility in a variety of highly polar aprotic solvents, whereas the poly(ester imide)s showed good solubility in less polar solvents. According to differential scanning calorimetry analyses, polymers 4a–4d and 5a–5d had glass‐transition temperatures between 331 and 357°C and between 318 and 342°C, respectively. The thermal behaviors of the obtained polymers were characterized by thermogravimetric analysis, and the 10% weight loss temperatures of the poly(amide imide)s and poly(ester imide)s were between 579 and 604°C and between 566 and 577°C in nitrogen, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3203–3211, 2006     

Studies of phosphonate‐containing bismaleimide resins. I. Synthesis and characteristics of model compounds and polyaspartimides

Two phosphonate‐containing bismaleimide (BMI) [(4,4′‐bismaleimidophenyl)phosphonate] monomers with different melting temperatures and similar curing temperatures were synthesized by reacting N‐hydroxyphenylmaleimide with two kinds of dichloride‐terminated phosphonic monomers. The BMI monomers synthesized were identified with ¹H‐, ¹³C‐, and ³¹P‐nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. The phosphonate‐containing BMI monomers react with a free‐radical initiator to prepare phosphonate‐containing BMI polymers and also with various aromatic diamines to prepare a series of polyaspartimides as reactive flame retardants. The polymerization degrees of polyaspartimides depend on the alkalinity and nucleophility of diamines as chain extenders. Differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA) were used to study the thermal properties of the phosphonate‐containing BMI resins such as the melting temperature, curing temperature, glass transition temperature (T_g), and thermal resistance. All the phosphonate‐containing BMI resins, except the BMI polymers, have a T_g in the range of 210–256°C and show 5% weight loss temperatures (T_5%) of 329–434 and 310–388°C in air and nitrogen atmospheres, respectively. The higher heat resistance of cured BMI resin relative to the BMI polymer is due to its higher crosslinking density. Since the recrosslinking reactions of BMI polymers and polyaspartimides occur more easily in an oxidation environment, their thermal stabilities in air are higher than are those in nitrogen gas. In addition, the thermal decomposition properties of polyaspartimides depend on the structures and compositions of both the diamine segments and the BMI segments. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1919–1933, 2002     

Highly refractive thiazole-containing polyimides: a structural property comparison

Highly refractive, thermally stable, and solution processable polyimides (PIs) were synthesized by the introduction of thiazole units, thioether linkages, and phenyl or nitrophenyl groups into the polymer backbones. These PIs were prepared via the polycondensation of two diamine monomers, 5,5′-thiobis(2-amino-4-phenyl-thiazole) (DA-1) or 5,5′-thiobis(2-amino-4-(3-nitrophenyl)thiazole) (DA-2), with various aromatic dianhydrides(a–d). The bulky pendant phenyl or nitrophenyl units as well as the non-coplanar conformations because of ortho-sulfide linkages endowed the resulting PIs with excellent solubility in organic solvents. These PIs showed outstanding thermal stability, with 10% weight loss temperatures exceeding 492 °C under nitrogen and 475 °C in air atmosphere, while their glass transition temperatures were in the range of 239–278 °C. In general, the synergic effects of thiazole groups, phenyl or nitrophenyl substituents, and thioether linkages provided PIs with very high refractive indices of up to 1.7646 at 632.8 nm, along with small birefringences (<0.0085) and high Abbe’s numbers. The structure–property relationships of the analogous PIs containing phenyl or nitrophenyl substituents groups were also studied in detail by comparing the results.     

Synthesis and characterization of some aromatic polyimides

The diamine 2‐methyl‐1,3‐bis(4‐aminophenyloxy)benzene was prepared via a nucleophilic substitution reaction and was characterized with Fourier transform infrared, elemental analysis, and ¹H‐ and ¹³C‐NMR spectroscopy. The prepared diamine was also characterized with single‐crystal analysis. The geometric parameters of C₁₉H₁₈N₂O₂ were in the usual ranges. The dihedral angles between the central phenyl ring and the two terminal aromatic rings were 88.9 and 91.6°. The crystal structure was stabilized by N? H···N hydrogen bonds. The diamine was then polymerized with 3,3′,4,4′‐benzophenone tetracarboxylic acid dianhydride, 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 3,4,9,10‐perylenetetracarboxylic acid dianhydride, and pyromellitic dianhydride by either a one‐step solution polymerization reaction or a two‐step procedure. These polymers had inherent viscosities ranging from 0.61 to 0.85 dL/gm. Some of the polymers were soluble in most common organic solvents even at room temperature, and some were soluble on heating. The degradation temperatures of the resultant polymers fell in the range of 260–500°C in nitrogen (with only 10% weight loss). The specific heat capacity at 200°C ranged from 1.0 to 2.21 J g^?1 K^?1. The temperatures at which the maximum degradation of the polymer occurred ranged from 510 to 610°C. The glass‐transition temperatures of the polyimides ranged from 182 to 191°C. The activation energy and enthalpy of the polyimides ranged from 44.44 to 73.91 kJ/mol and from 42.58 to 72.08 kJ/mol K, respectively. The moisture absorption was found in the range of 0.23–0.71%. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of silicon‐containing poly(amide‐amide)s

A modified new aromatic diacid, bis[(4‐carboxyphenyl) 4‐benzamide] dimethylsilane (IV) with preformed amide linkages and a silicon moiety was synthesized and characterized by IR, NMR, mass spectroscopy, and a physical constant. Novel poly(amide‐amide)s were synthesized from IV and aromatic diamines by Yamazaki's direct polyamidation method in N‐methyl pyrrolidinone. The polymers were obtained in excellent yields and showed reduced viscosities in the range of 0.42–6.15 dL/g. They were readily soluble in aprotic polar solvents. These poly(amide‐amide)s showed glass‐transition temperatures of 303–378°C as measured by DSC and showed no weight loss below 377°C in a nitrogen atmosphere. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1610–1617, 2001     

Synthesis and characterization of organosoluble polyfluorinated polyimides derived from 3,3′,5,5′‐tetrafluoro‐4,4′‐diaminodiphenylmethane and various aromatic dianhydrides

A polyfluorinated aromatic diamine, 3,3′, 5,5′‐tetrafluoro‐4,4′‐diaminodiphenylmethane (TFDAM), was synthesized and characterized. A series of polyimides, PI‐1–PI‐4, were prepared by reacting the diamine with four aromatic dianhydrides via a one‐step high‐temperature polycondensation procedure. The obtained polyimide resin had moderate inherent viscosity (0.56–0.68 dL/g) and excellent solubility in common organic solvents. The polyimide films exhibited good thermal stability, with an initial thermal decomposition temperature of 555°C–621°C, a 10% weight loss temperature of 560°C–636°C, and a glass‐transition temperature of 280°C–326°C. Flexible and tough polyimide films showed good tensile properties, with tensile strength of 121–138 MPa, elongation at break of 9%–12%, and tensile modulus of 2.2–2.9 GPa. The polyimide films were good dielectric materials, and surface and volume resistance were on the order of a magnitude of 10¹⁴ and 10¹⁵ Ω cm, respectively. The dielectric constant of the films was below 3.0 at 1 MHz. The polyfluorinated films showed good transparency in the visible‐light region, with a cutoff wavelength as low as 302 nm and transmittance higher than 70% at 450 nm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1442–1449, 2007     

Synthesis and characterization of poly(ether carbonate)s by melt‐phase interchange reactions of dihydroxy compounds with alkylene and arylene diphenyl dicarbonates containing ether groups

A new method of synthesis of poly(ether carbonate)s based on interchange reactions of dihydroxy compounds with alkylene and arylene diphenyl dicarbonates containing ether group was presented. The diphenyl dicarbonate monomers were prepared from phenyl chloroformate and dihydroxy compounds containing ether group (e.g., diethylene glycol, bis(2‐hydroxyethyl ether) of bisphenol A, and 4,4′‐oxydiphenol). The process consisted of a precondensation step under a stream of dry argon followed by a melt polycondensation at 230 or at 250°C under vacuum. Four series of poly(ether carbonate)s were prepared using this approach. Using alkylene and arylene diphenyl dicarbonate‐containing ether groups as monomers, the polycondensation reaction with dihydroxy compounds led to the formation of poly(ether carbonate)s having inherent viscosity values up to 0.56 dL/g and high thermal stability. The glass transition temperature values of polycarbonates were in the range 7–122°C. The polymers were characterized by inherent viscosity and spectroscopic (Fourier transform infrared spectroscopy and ¹H‐NMR and ¹³C‐NMR) and thermal (differential scanning calorimeteric and thermogravimetric) methods. This approach may permit the use of diphenyl dicarbonates containing other organic functional groups for the synthesis of polycarbonates containing those groups. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and properties of three novel poly(phosphazene‐aryl amide)s containing cyclotriphosphazene structures

1,1,3,5‐tetraphenoxy‐3,5‐bis(4‐aminoanilino)cyclotriphosphazene, 1,1,3,5‐tetraphenoxy‐3,5‐bis[4‐(4‐aminophenysulfone)anilino)]cyclotriphosphazene, and 1,1,3,5‐tetraphenoxy‐3,5‐bis(N,N′‐ethanediamine)cyclotriphosphazene were synthesized in two steps from the p‐Phenylenediamine, 4,4′‐diaminodiphenylsulfone, and ethylenediamine via nucleophilic substitution and catalytic reduction with hexachlorocyclotriphosphazene. Three novel aromatic polyamides such as poly(cyclotriphosphazene‐p‐phenylene amide), poly(cyclotriphosphazene‐p‐sulfuryl amide), and poly(cyclotriphosphazene‐ethyl amide) were synthesized from these diamines by direct polycondensation reaction with terephthaloyl chloride and pyridine in N‐methyl pyrrolidone, respectively. The chemical structures of the diamine monomers and three novel poly(cyclotriphosphazene‐aryl amide)s were characterized by Fourier Transform Infrared, (¹H and ³¹P) Nuclear Magnetic Resonance, and Elemental Analysis. The thermal properties of the polyamides were determined by Differential Scanning Calorimetry and Thermogravimetric Analysis (TGA). The crystallization behaviors of the polyamides were studied by Wide‐ray X‐ray diffraction, and the morphology of the pyrolysis residues were observed by Scanning Electron Microscope. The three poly(cyclotriphosphazene‐aryl amide)s with amorphous structure would exhibit an enhanced solubility in polar aprotic solvents and a superior thermal stability with initial decomposition temperature being at about 198–259°C. TGA curves of the poly(cyclotriphosphazene‐aryl amide)s exhibit mainly three thermal decomposition steps, and the poly(cyclotriphosphazene‐p‐phenylene amide) presents the highest solid residue rate 62.6% heated to 600°C. In the morphology analysis of the poly(cyclotriphosphazene‐aryl amide) solid residues, organophosphorus gelatum forms in the surface layer were observed. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polyimides based on furanic diamines and aromatic dianhydrides: synthesis,characterization and properties

Novel polyimides containing furan moieties were prepared from the resulting furanic diamine monomers with various aromatic dianhydrides including 1,2,4,5-benzene-tetracarboxylic dianhydride, 3,3′,4,4′-biphenyltetracarboxylic dianhydride, 4,4′-oxydiphthalic anhydride, and hexafluoroisopropylidene 2,2-bis(phthalic anhydride), via a two-step process. The resulting polyimides were characterized by solubility tests, viscosity measurements, FTIR, ¹H NMR spectroscopy, differential scanning calorimetric (DSC), and thermogravimetric analysis (TGA) analysis. The polyimides with inherent viscosities in the range of 0.048–0.095 L/g showed excellent solubility in aprotic amide and organic solvents, such as N,N-dimethylacetamide, N-methyl-2-pyrrolidinone, dimethylformamide and acetone, chloroform, etc. DSC showed glass transition temperatures (T _g) in the range of 116–143 °C. These polymers showed excellent thermal stability up to 390 °C.     

Synthesis and characterization of segmented poly(ether ester amide)s from diglycol,adipic acid,and a nylon‐6 oligomer

This article presents a convenient method for synthesizing segmented poly(ether ester amide)s (PEEAs) by polycondensation and chain extension. A nylon‐6 oligomer prepared from ε‐caprolactam and ethanolamine through ring‐opening polymerization was polymerized with adipic acid and diglycol to prepare PEEA prepolymers (PrePEEAs) with ether linkages and amide contents ranging from 20 to 60 mol%. Chain extension of the PrePEEAs was conducted at 200°C using 2,2′‐(1,4‐phenylene)‐bis(2‐oxazoline) and carbonyl biscaprolactamate as combination chain extenders. The chain‐extended PEEAs (ExtPEEAs) were characterized by viscometry, gel permeation chromatography, FT‐IR, ¹H‐NMR, differential scanning calorimetry, thermogravimetric analysis, wide angle X‐ray diffraction, and tensile testing. Results show that incorporation of nylon‐6 segments yields semicrystalline ExtPEEAs and that introduction of ether linkages improves the flexibility of the resultant polymers. ExtPEEAs showed T_m from 107.6 to 137.3°C, good thermal stability with initial decomposition temperatures above 337.3°C, and tensile strengths of up to 27.4 MPa with strains at break ranging from 231.24 to 1052.52%. POLYM. ENG. SCI., 55:763–770, 2015. © 2014 Society of Plastics Engineers     

Synthesis and characterization of novel aromatic-aliphatic poly(amide-imide-imide)s (PAII)

Novel poly(amide-imide-imide)s (PAII) were prepared by polycondensation of a new monomer synthesized from trimellitic anhydride and glutamic acid, followed by reflux condensing with thionyl chloride and several diamines. Polymers and monomers were characterized by ¹H NMR and FT-IR spectroscopy, elemental analysis and mass spectrometry. Inherent viscosities of the resulting polymers were in the range of 17–26 mL g^–1 (M_w 13 400–29 160, polydispersity (M_w/M_n) ca. 1.3–1.7), representing rather low molecular weights. The glass transition temperatures of the polymers were in the range of 210–285°C depending on the structure of diamines, and the thermal stability of the polymers was up to 400°C, comparable with that of polyimides and poly(amide imide)s. All the polymers synthesized are well soluble in aprotic polar solvents such as dimethylformamide, dimethyl sulfoxide, N-methyl-2-pyrrolidone and dimethylacetamide. Particularly, polymers containing oxydianiline and 4,4′-diaminodiphenyl sulfone were quite soluble in m-cresol, pyridine, nitrobenzene and tetrahydrofuran.     

Effects of thioether content on thermal and optical properties of polyamides

4,4′‐Bis(4‐chloroformylphenylthio)benzene was synthesized in two steps and was reacted with diamine‐containing thioether and amide units to prepare a polyamide containing high contents of thioether groups. The intrinsic viscosities of the polyamides were 0.76–0.87 dL g^?1. These polyamides had excellent thermal properties, with glass transition temperatures of 234.8–269 °C and initial degradation temperatures of 461–469.7 °C. They showed improved solubility in polar aprotic solvents and could form moderate strength films with a tensile strength of 75.2–111.6 MPa and storage modulus of 1.0–1.3 GPa (at 220 °C). These polymer films also had good optical properties, including an optical transmittance of the aromatic polyamide film at 450 nm that was higher than 90%. Additionally, the high quantity of thioether units provided the polymers with high refractive indices of 1.700–1.704 and low birefringences of 0.007–0.008. Copyright © 2012 Society of Chemical Industry     

Aromatic polyimides from m‐phenylene diamines containing pendant groups: Synthesis and characterization

Two diamine monomers, 4‐[4‐(1‐methyl‐1‐phenylethyl)phenoxy]‐1,3‐diamino benzene and 4‐{4‐[(4‐methylphenyl)sulfonyl]phenoxy}‐1,3‐diamino benzene, were synthesized, and both diamines were polycondensed with three commercial dianhydrides to obtain aromatic polyimides containing pendant groups. The polyimides were characterized by solubility tests, viscosity measurements, IR, ¹H‐NMR, and ¹³C‐NMR spectroscopy, X‐ray diffraction studies, and thermogravimetric analysis. The polyimides had inherent viscosities of 0.33–0.58 dL/g in m‐cresol at 30 ± 0.1°C. All the polyimides were amorphous and were soluble in solvents such as N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidone, N,N‐dimethylformamide, and m‐cresol. Thermogravimetric analysis of the polyimides indicated no weight loss below 410°C under a nitrogen atmosphere. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1377–1384, 2005