Graft copolymerization with new class of acidic peroxo salts as initiators. I. Grafting of acrylamide onto cotton–cellulose using potassium monopersulfate,catalyzed by co(II)

Graft copolymerization of acrylamide (AM) onto cotton–cellulose has been studied using a new class of acidic peroxo-salt “potassium monopersulfate” as initiator catalyzed by Co(II). It is observed that the graft yield is influenced by the reaction time, temperature, and concentrations of the monomer, catalyst, initiator, at fixed weight of the polymer. Maximum graft yield (30.8%) is obtained at 40°C under nitrogen atmosphere for the concentrations of monomer 1.2M; initiator 4.83 × 10^?3M; Co(II) 5 × 10^?4M for 4 h of reaction time. The graft copolymers after proper purification have been subjected to IR analysis, testing of their water-retention properties, rot resistance, tensile properties, and behavior towards acids and alkalies. The results of such analysis are compared with the base. Suitable mechanism for the graft copolymerization is suggested and grafting rate has been evaluated.     

Grafting vinyl monomers onto wool fibers. V. Graft copolymerization of methyl methacrylate onto wool using peroxydiphosphate as initiator

Graft copolymerization of methyl methacrylate onto wool was investigated in aqueous solution using potassium peroxydiphosphate as initiator. The rate of grafting was determined by varying monomer, peroxydiphosphate ion, temperature, solvent, and nature of wool. The graft yield increases with increase in monomer concentration. The graft yield increases significantly by increasing peroxydiphosphate ion up to 80 × 10^?4mole/l.; with further increase of peroxydiphosphate ion the graft yield decreases. The rate of grafting increases with increase in temperature. The effect of acid-and water-soluble solvents on the rate of grafting was investigated and a suitable rate expression has been derived.     

Grafting vinyl monomers onto silk fibers. XV. Graft copolymerization of methyl methacrylate onto silk using thallium (III) as initiator

The graft copolymerization of methyl methacrylate onto silk initiated by thallium (III) perchlorate was investigated in aqueous medium. The rate of grafting was evaluated varying the concentration of monomer, initiator, and acid, and the temperature. The graft yield was found to increase with increasing the monomer and initiator concentrations. The graft yield was found to decrease with increasing the acid concentration. The effect of inhibitors and various solvents on the graft yield was studied. From the Arrhenius plot the overall activation energy was found to be 4.2 kcal/mol. A suitable kinetic scheme has been proposed, and a rate equation has been derived.     

Graft copolymerization of methyl methacrylate onto wool using thallium (III) ions as initiator

The graft copolymerization of methyl methacrylate onto wool initiated by thallium (III) perchloric was investigated in aqueous perchloric acid medium. The rate of grafting was evaluated varying the concentrations of the monomer, initiator, acid, and temperature. The rate of grafting was found to increase with the increase of the monomer and the initiator concentration. The graft yield was found to decrease upon increasing the acid concentration. Increase of temperature was accompanied with the increase of the graft yield. From the Arrhenius plot the overall activation energy was calculated to be 4.7 kcal/mol. The effect of inhibitors, various solvents, cationic and anionic surfactants, and different inorganic salts on the graft yield was studied. The grafting was considerably influenced by chemical modification of wool prior to grafting. A suitable kinetic scheme has been proposed, and a rate equation has been derived.     

Effect of grafting methacrylate monomers onto jute constituents with a potassium persulfate initiator catalyzed by Fe(II)

The graft copolymerization of methyl methacrylate and ethyl methacrylate monomers onto jute fiber was carried out in an aqueous medium with potassium persulfate as an initiator under the catalytic influence of ferrous sulfate in the presence of air. The effects of parameter variables, such as the monomer, initiator, and catalyst concentrations, the reaction time, and the temperature, on grafting and the effect of grafting the monomers onto jute constituents were studied. The degree of grafting depended on the kinds of monomers and the parameter variables. The maximum graft yield percentages with methyl methacrylate and ethyl methacrylate under optimized conditions were 18.9 and 38.8%, respectively, and the grafting onto jute fiber was largely affected by one of its main constituents, such as hemicellulose. The graft copolymers were characterized, and their improved properties were also examined. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2369–2375, 2007     

Grafting vinyl monomers onto silk fibers III. Graft copolymerization of methyl methacrylate onto silk using tetravalent cerium as initiator

The use of tetravalent ceric ions to initiate graft-copolymerization of methyl methacrylate onto silk has been investigated. The rate of grafting has been determined by varying monomer, cerium (IV), temperature, and nature of silk. The graft yield increases with increasing monomer concentration up to 0.65 mol/l and with further increase of monomer, the graft yield decreases. The percentage of grafting increases with increasing ceric ion concentration up to 0.03 mol/l and thereafter it decreases. The rate of reaction is temperature dependent, with increasing temperature, the graft yield increases. The grafting is considerably influenced by chemical modification prior to grafting. The effect of different species of ceric ion and CuSO₄ on the rate of grafting has also been investigated.     

Graft copolymerization onto rubber. VII. Graft copolymerization of methyl methacrylate onto rubber using potassium peroxydisulfate catalyzed by silver ion

The graft copolymerization of methyl methacrylate onto natural rubber (NR) was carried out varying the concentration of monomer, initiator, thiourea, and silver nitrate over a wide range. The grafting reaction was temperature-dependent. From the Arrhenius plot, the overall energy of activation was computed. A suitable reaction scheme and rate expression for the rate of polymerization was suggested.     

Grafting vinyl monomers onto silk fibers,VII. Graft copolymerization of methyl methacrylate onto silk using peroxydiphosphate as initiator

Graft copolymerization of methyl methacrylate onto silk was investigated in aqueous solution using potassium peroxydiphosphate as initiator. The rate of grafting was determined by varying monomer, peroxydiphosphate ion, temperature, and solvent. The graft yield increased with increasing peroxydiphosphate ion upto 8 × 10^?3 mol/1 and with further increase of peroxydiphosphate ion the graft yield decreased. The graft yield increased with increasing monomer concentration upto 9 wt.-% and with further increase of monomer the graft yield decreased. The rate of grafting increased with the increase of temperature. The effect of acid and water soluble solvents and salts on graft yield was investigated and a suitable rate expression was derived.     

Grafting vinyl monomers onto cellulose. IV. Graft copolymerization of methyl methacrylate onto modified cellulose using peroxydiphosphate as the initiator

The graft copolymerization of methyl methacrylate onto modified cellulose was studied at 60° causing peroxydiphosphate as the initiator. The rate of grafting in case of different modified cellulose was determined by varying peroxydiphosphate, monomer, nature of substrate, and temperature. The molecular weight of the isolated polymer has been determined, and the mechanism of grafting is discussed.     

Graft copolymerization of methyl methacrylate onto jute fiber initiated by cerium(IV)–DMSO redox initiator system

The kinetics of graft copolymerization of methyl methacrylate (MMA) onto chemically modified jute fibers initiated by the Ce(IV)–DMSO redox system was studied in the temperature range of 40–60°C. By studying the effects of the concentration of the monomer, Ce(IV), and DMSO on the rate of grafting, the optimum conditions for grafting were determined. Also, the effect of temperature, time, concentration of the acid, the amount of jute fiber, and some inorganic salts and organic solvents on the rate was investigated. A kinetic scheme was proposed on the basis of the experimental findings. Infrared spectra of chemically modified jute and grafted jute was investigated. More than 120% of grafting could be achieved with the present system. The characterization of MMA-grafted chemically modified jute by TGA and DTA studies was made. The thermal stability of the jute fibers was improved by grafting. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 2569–2576, 1998     

Grafting vinyl monomers onto polyester fibers. VI. Graft copolymerization of methyl methacrylate onto PET fibers using tetravalent cerium as initiator

The graft copolymerization of methyl methacrylate onto polyester fibers (PET) was investigated using tetravalent cerium as the initiator. The rate of grafting was found to increase progressively with the initiator and monomer concentrations up to 2.5 × 10^?2M and 70.41 × 10^?2M, respectively. The reaction was found to be catalysed by acid up to 15.0 × 10^?2M. The graft yield increased by increasing temperature. The effect of addition of some solvents and thiourea on the rate of grafting was also investigated. A suitable kinetic scheme has been pictured, and rate equations have been derived.     

Graft copolymerization of methyl methacrylate onto jute fibers. Studies on vanadium (V)-cyclohexanol redox system

Graft copolymerization of methyl methacrylate (MMA) onto natural jute (chemically modified) was studied using V⁵⁺ -cyclohexanol redox initiator system. The effects of time, concentration of metal ion (V⁵⁺), monomer (MMA), substrate, amount of jute fibers, temperature, and acid concentration on graft yield have been studied. The effects of some organic solvents and inorganic salts on graft yield have also been studied. A grafting mechanism is proposed and an expression has been derived for the reaction rate. Grafting has improved the thermal stability and the light fastness of jute fibers dyed with basic dyes. IR spectra of the natural jute (chemically modified) and grafted jute have been taken. More than 170% graft yield could be achieved with the present system.     

Graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) fibers using thallium(III) ions as initiator

Graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) fibers was investigated in aqueous perchloric acid medium using thallium(III) ions as initiator. The rate of grafting was evaluated varying the concentrations of monomer, initiator, and acid and the temperature. The rate of grafting was found to increase with increase in monomer and initiator concentrations. The graft yield was found to increase with increase in the acid concentration up to 0.49 mL^?1, and beyond this concentration it was found to decrease. Increase in temperature resulted in increase in graft yield. From the Arrhenius plot the overall activation energy was found to be 3.76 kcal/mol. The effect of additives such as swelling agents, inorganic salts, different solvents, and inhibitors on graft yield was studied. A suitable kinetic scheme is proposed and a rate equation derived.     

Graft copolymerization of methyl methacrylate onto sago starch using ceric ammonium nitrate and potassium persulfate as redox initiator systems

The graft copolymerization of methyl methacrylate (MMA) onto sago starch was carried out in aqueous media by different initiators of ceric ammonium nitrate (CAN) and potassium persulfate (PPS) and under a nitrogen gas atmosphere. Using CAN as an initiator, the maximum percentage of grafting (%G) was ascertained to be 246% at the following optimum conditions: a 70°C reaction temperature, a 2‐h reaction period, 2.0 mmol of CAN, 0.4 mmol of nitric acid, and 141 mmol of MMA. The maximum %G achieved with PPS as the initiator was 90%. The optimum conditions were a 50°C reaction temperature, a 1.5‐h reaction period, 47 mmol of monomer, and 1.82 mmol of PPS. The grafting of MMA onto sago starch was confirmed by the IR spectra of pure sago starch, MMA, and MMA grafted sago starch. This material may have application as a biodegradable plastic. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1375–1381, 2001