闭环子空间辨识方法的分析与比较

在实际应用中,辨识方法的辨识精度和辨识效率一直是人们关注的指标,也是人们选择辨识方法的主要依据。针对多种闭环子空间辨识方法的辨识精度和辨识效率问题的研究,首先归纳和总结了基于正交分解和基于正交投影闭环子空间辨识方法的理论和实现;然后扩展提出了基于正交分解的闭环子空间辨识方法 ORT_POMOESP、ORT_N4SID和基于正交投影的闭环子空间辨识方法 CSOPIM_W2;最后考虑系统输入输出测量噪声,针对过程噪声为白噪声和有色噪声两种情况下,通过仿真算例以数值分析的形式,对比研究了多种闭环子空间辨识方法的辨识精度和辨识效率。该研究不仅对子空间辨识方法应用于实际工业过程的建模具有实际的参考价值,而且对实际工程应用中闭环子空间辨识算法的选用具有一定的指导意义。     

基于辅助变量的闭环系统子空间辨识

提出一种基于辅助变量的子空间辨识方法,适用于控制器信息未知以及参考输入已知的闭环系统参数辨识.通过将输入-输出数据块正交投影到辅助变量的行空间,直接得到扩展观测矩阵垂空间的估计.由此可从闭环系统中提取出对象模型信息,同时由SVD分解得到扩展观测矩阵与下三角Toeplitz矩阵的估计.给出了系统参数矩阵、噪声矩阵的计算方法.将所提出的子空间辨识方法应用于闭环动态的系统参数估计,其结果表明了该方法的有效性.     

基于输入扩张的闭环系统子空间辨识及其强一致性分析

针对闭环条件下的子空间辨识问题, 结合线性代数和几何学的基本概念, 将输入输出误差序列包含至输入子空间中, 基于输入扩张的状态空间构造方法, 提出一种新的闭环辨识算法；解决开环算法应用于闭环系统辨识时产生有偏估计, 甚至不能正确辨识的问题；实现闭环条件下对系统状态空间矩阵的强一致估计, 并理论证明该辨识算法的强一致性；最后通过仿真实例验证本算法的有效性.     

基于正交分解的递推子空间闭环辨识方法

为实现闭环系统在线辨识,提出递推正交分解闭环子空间辨识方法(RORT)。首先,根据闭环系统状态空间模型和数据间投影关系,构建确定-随机模型,并利用GIVENS变换实现投影向量的递推QR分解;然后,引入带遗忘因子的辨识算法,构建广义能观测矩阵的递推更新形式,以减少子空间辨识算法中QR分解和SVD分解的计算量;最后,针对某型号陀螺仪闭环系统进行实验。实验结果表明, RORT法的辨识拟合度高于91%,能够对陀螺仪闭环系统模型参数进行在线监测。     

子空间盲辨识的改进算法

针对单输入多输出(SIMO)系统模型参数的盲辨识问题进行了研究,基于二阶统计量,提出一类改进的子空间辨识算法.依据协方差阵的秩对该矩阵进行分块,在此基础上考虑了实际系统中存在的噪声误差,利用总体最小二乘(TLS)得到一个与噪声子空间相关的量,最后对该量进行标准正交化,得到了噪声子空间.与传统子空间方法相比,改进算法不需要对协方差矩阵进行特征值分解,可以减弱噪声及不确定因素的影响,减少了运算量,仿真实验结果表明了该算法的有效性.     

基于辅助变量的闭环系统子空间辨识

提出一种基于辅助变量的子空间辨识方法,适用于控制器信息未知以及参考输入已知的闭环系统参数辨识.通过将输入-输出数据块正交投影到辅助变量的行空间,直接得到扩展观测矩阵垂空间的估计.由此可从闭环系统中提取出对象模型信息,同时由SVD分解得到扩展观测矩阵与下三角Toeplitz矩阵的估计.给出了系统参数矩阵,噪声矩阵的计算方法.将所提出的子空间辨识方法应用于闭环动态的系统参数估计,其结果表明了该方法的有效性.

     

基于随机分布理论的递推子空间辨识

在实际生产过程中,采用传统子空间辨识法建立的离线模型并不能有效准确地跟踪系统的动态变化;奇异值分解等线性代数工具虽然增加算法的数值鲁棒性,但也相应增加了子空间辨识的在线递推困难.为解决上述问题,本文针对连续时间系统提出基于随机分布理论的递推子空间辨识方法.首先,通过随机分布理论构建系统的连续随机分布函数,并利用微分计算获得系统等价的输入输出矩阵方程.然后,采用将输入输出数据矩阵"R"规模固定的方法,达到数据压缩的目的.最后,通过最小二乘法和残差分析法递推更新模型的系统矩阵和噪声强度直至达到辨识要求.仿真结果验证了所提方法的有效性和精确性.     

基于新息估计和正交投影的闭环子空间模型辨识

针对闭环控制系统提出一种基于新息估计和正交投影的闭环子空间模型辨识方法.首先采用最小二乘法对VARX模型（Vector autoregressive with exogenous inputs model）进行计算得到新息估计值,然后通过将由观测输入输出数据构造的Hankel矩阵正交投影到新息数据的正交补空间以消除噪声影响,从而在无噪声的输入输出数据奇偶空间中提取得到扩展可观测矩阵和下三角形Toeplitz矩阵.最后采用平移变换法得到系统矩阵.对该算法严格分析和证明了实现一致估计的条件.通过仿真实例验证了本文方法的有效性和优越性.     

闭环辨识与开环辨识的比较及应用

用数字仿真的方法,在同一个单输入单输出线性离散随机系统中,把四种不同实验条件下的闭环辨识与开环辨识进行比较。结果表明,在调节器输出端施加伪随机二位信号的实验条件,适宜于工业生产过程应用的闭环辨识实验条件。按此实验条件进行闭环辨识可以得到精度与开环辨识相近的过程模型。也在实验室规模的热交换器上进行了闭环和开环辨识,得到了与数字仿真一致的结果。     

连续时间模型的闭环子空间辨识

本文对直接使用采样数据进行连续系统的闭环子空间辨识问题进行了研究．将线性滤波方法与基于主 元分析的子空间辨识相结合,利用参考输入或者外部激励信号的高阶滤波变换的正交投影变量作为辅助变量,提出 了一种新的连续时间系统闭环子空间辨识算法．数值仿真表明了与其他算法相比,本文提出的算法具有很好的辨识 效果．     

Subspace identification of closed loop systems by the orthogonal decomposition method

In this paper, we consider a problem of identifying the deterministic part of a closed loop system by applying the stochastic realization technique of (Signal Process. 52 (2) (1996) 145) in the framework of the joint input-output approach. Using a preliminary orthogonal decomposition, the problem is reduced to that of identifying the plant and controller based on the deterministic component of the joint input-output process. We discuss the role of input signals in closed loop identification and the realization method based on a finite data, and then sketch a subspace method for identifying state space models of the plant and controller. Since the obtained models are of higher order, a model reduction procedure should be applied for deriving lower order models. Some numerical results are included to show the applicability of the present technique.     

A CLOSED‐LOOP SUBSPACE IDENTIFICATION METHOD FOR CONTINUOUS‐TIME SYSTEMS BASED ON δ‐OPERATOR MODEL

This paper is concerned with a subspace identification of a continuous‐time plant operating in closed‐loop in the framework of the joint input‐output approach. The main procedure consists of two steps. Firstly, the dual‐Youla parametrization of the plant is used for obtaining an equivalent open‐loop problem to the original closed‐loop identification problem. Then, a δ‐operator based IV‐MOESP type subspace identification algorithm is developed to estimate the state space model for the joint input‐output process, whereby a higher‐order state space model of the plant is obtained by an algebraic operation. Subsequently, a model reduction procedure is employed to derive a lower‐order plant model removing irrelevant modes from the higher order model. Simulation results by using numerical and chemical plant models demonstrate the feasibility of the proposed method.     

Closed-loop subspace identification using the parity space

It is known that many subspace algorithms give biased estimates for closed-loop data due to the existence of feedback. In this paper we present a new subspace identification method using the parity space employed in fault detection in the past. The basic algorithm, known as subspace identification method via principal component analysis (SIMPCA), gives consistent estimation of the deterministic part and stochastic part of the system under closed loop. Column weighting for SIMPCA is introduced which shows improved efficiency/accuracy. A simulation example is given to illustrate the performance of the proposed algorithm in closed-loop identification and the effect of column weighting.     

一种新的基于遗忘因子的递推子空间辨识算法

针对工业系统中广泛存在的时变特性, 提出一种新的递推子空间辨识算法, 实现对系统状态空间模型的在线递推估计. 为更好地跟踪系统时变特性, 研究基于遗忘因子的输入输出数据矩阵构造机制, 以提高递推算法的收敛速度; 针对算法中奇异值分解的求解问题, 将梯度型算法引入基于遗忘因子的状态子空间跟踪中, 实现对广义能观测矩阵的估计, 避免了子空间近似带来的估计有偏性; 该算法计算简单有效, 且对初值具有更高的鲁棒性; 最后给出该递推算法的性能分析, 理论证明其收敛性, 并通过仿真实例验证算法的有效性.     

An approach to closed-loop subspace identification by orthogonal decomposition

A method of identifying closed-loop systems is developed by using the orthogonal decomposition (ORT) method. The idea is to project the input and output data onto the space of exogenous inputs by using the LQ decomposition to obtain their deterministic components. The ORT-based method is then applied to deterministic components like the direct approach in order to derive state-space models of the plant. We also show that the present method is a subspace version of the two-stage method for transfer function estimation from closed loop data. Some simulation results are included to show the applicability of the present method.     

基于子空间辨识的模型算法控制器设计

提出了一种基于子空间辨识的模型算法控制器设计方法.在输入信号满足持续激励的条件下,先利用子空间辨识方法提取出系统有限单位脉冲响应序列,再利用单位脉冲序列构成的矩阵设计预测控制器.该方法将独立的对象辨识和控制器设计整合在一起,简化了控制器的设计过程,是一种完全的数据驱动方式.工业过程对象的仿真实验详细给出了该算法的设计过...     

Subspace model identification under load disturbance with unknown transient and periodic dynamics

To overcome the influence from load disturbance with unknown transient and periodic dynamics, as often encountered when performing identification tests in engineering applications, a bias-eliminated subspace model identification method is proposed to realize consistent estimation, which can be used for both open- and closed-loop systems. By decomposing the output response into disturbed and undisturbed components, an oblique projection is subtly introduced to eliminate the disturbance and noise impact so as to obtain unbiased estimation on the deterministic system state matrices, while the disturbance response dynamics could be estimated. In particular, a specific algorithm based on minimizing the output prediction error is given to find out the disturbance period if exists, such that the disturbance effect can be eliminated by the above projection regardless of the disturbance waveform and magnitude. A shift-invariant approach is then given to retrieve the deterministic state matrices. Consistent estimation on the deterministic system matrices is analyzed with a proof. A benmark example from the literature and an industrial injection molding process are used to demonstrate the effectiveness and merit of the proposed method.