Lewis and Brønsted acids in super-acid catalyst SO<Subscript>4</Subscript><Superscript>2−</Superscript>/ZrO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>

Super-acid catalyst, SO₄ ^2?/ZrO₂–SiO₂, with high zirconium loading was synthesized and the nature of the surface acid was investigated by FT-IR of pyridine adsorption. With the increasing ZrO₂ content, the Lewis and Brønsted acid sites increased and reached the maximum when Zr/Si (molar ratio) = 1.3. The sample with Zr/Si = 1.3 showed the strongest IR adsorption band in the S=O stretching region (1,300–1,400 cm^?1). Pyrosulfate and monosulfate species existed on the surface of the catalysts and the acidic strength could be enhanced by induction effect of their S=O groups. And there were two kinds of Brønsted acid sites on the surface of the catalysts.     

Formation-decomposition equilibrium of the NpO<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack>·UO<Stack><Subscript>2</Subscript><Superscript>2+</Superscript></Stack> complex in chloride melts

The absorption spectra of the NpO ₂ ⁺ (5f ²) ion were examined in the region of the 3H ₅ ← ³ H ₄ magnetic dipole transition (1530–1760 nm) for series of melts with the UO ₂ ²⁺ concentration varied in the opposite directions: (1) NaCl-2CsCl eutectic melt with growing additions of the Cs₂UO₂Cl₄ complex salt and (2) Cs₂UO₂Cl₄ melt with growing additions of the NaCl-2CsCl mixture. Measurements of the integrated intensities of the bands belonging to the NpO ₂ ⁺ ·UO ₂ ²⁺ complex and unbound NpO ₂ ⁺ throughout the UO ₂ ²⁺ concentration range examined (up to 4.4 M in neat Cs₂UO₂Cl₄ melt) and processing of the data obtained in terms of the mass action law showed that the formation-decomposition reaction of the cation-cation complex can be described adequately only using the equation of reaction in the form NpO₂Cl ₄ ^3? + UO₂Cl ₄ ^2? ? {Cl₄ONpO?UO₂Cl₃}^4? = Cl^? (with the equilibrium constant of 1.3±0.1). Thus, the formation of the cationcation complex should be treated as replacement of chloride ion in the equatorial plane of uranyl(VI) by neptunyl(V), rather than as simple addition of UO ₂ ²⁺ to NpO ₂ ⁺ . The reverse reaction, decomposition of the cation-cation complex, consists essentially in replacement of neptunyl(V) by chloride ion.     

Luminescent properties of single-phase Ba<Subscript>2</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript>:Tb<Superscript>3+</Superscript>, R (R = Eu<Superscript>2+</Superscript>, Ce<Superscript>3+</Superscript>) phosphors for white LED

The Ba₂P₂O₇:Tb³⁺, R (R?=?Eu²⁺, Ce³⁺) phosphors were synthesized by use of a co-precipitation method. Crystal phase, excitation and emission spectra of sample phosphors are analyzed by means of XRD and FL, respectively. The emission spectra of Ba₂P₂O₇:Ce³⁺, Tb³⁺ phosphors exhibit four linear peaks attributed to the ⁵D₄?→?⁷F_J (J?=?6–3) transition of Tb³⁺ while four broad emission bands are observed in the emission spectra of Ba₂P₂O₇:Eu²⁺, Tb³⁺ phosphors. The effects of Eu²⁺ concentration on the luminescent properties of Ba₂P₂O₇:Tb³⁺, R (R?=?Eu²⁺, Ce³⁺) are studied. Ce³⁺ affects the luminescent properties of Ba₂P₂O₇:Ce³⁺, Tb³⁺ phosphors just as the sensitizer. However, Eu²⁺ is considered both as the sensitizer and the activator in Ba₂P₂O₇:Eu²⁺, Tb³⁺ phosphors. The chromaticity coordinates of Eu²⁺ and Tb³⁺ co-doped phosphors gather around the white light field with the CCT approximate to 5000 K, indicating that the luminescent property of Ba₂P₂O₇:Eu²⁺, Tb³⁺ phosphors may approach to a desired level needed for white LED application.     

Stability of the LaCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> and LuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> Ions Studied by Mass Spectrometry

The enthalpy stability of the LaCl ₄ ^? and LuCl ₄ ^? ions is assessed using high-temperature mass spectrometry. The enthalpy of Cl^? detachment is determined to be Δ_rH⁰(298.15 K) = 332 ± 10 kJ/mol for LaCl ₄ ^? and 359 ± 10 kJ/mol for LuCl ₄ ^? .     

Structural and electrical properties of Ho<Superscript>3+</Superscript>-modified Pb(Zn<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript>–9PbTiO<Subscript>3</Subscript> single crystals

Ho³⁺-modified Pb(Zn_1/3Nb_2/3)O₃–9PbTiO₃ (PZN–9PT) single crystals were grown through a flux method. Phase structure and microstructural morphology of the as-grown single crystals were performed by X-ray diffraction analysis and scanning electron microscopy. The refinement of the lattice parameters were obtained by the Rietveld method. The electrical properties of PZN–9PT single crystals were improved significantly by the modification of Ho³⁺ ions. The rhombohedral–tetragonal phase transition temperature, Curie temperature, coercive field at 15 kV cm^?1, and remnant polarization of Ho³⁺-modified PZN–9PT single crystals were increased by 14, 42 K, 2.4 kV cm^?1, and 7.5 μC cm^?2, respectively (i.e., 375.45, 448.45 K, 5.9 kV cm^?1, and 38.40 μC cm^?2, respectively). Furthermore, Lorentz-type law was used to describe the dielectric relaxor behavior of the as-grown single crystals.     

Ho<Superscript>3+</Superscript>-Doped ZrF<Subscript>4</Subscript>–BaF<Subscript>2</Subscript>–BiF<Subscript>3</Subscript> Ceramic 2-µm laser beam visualizer

A ceramic 2-µm laser beam visualizer based on Ho³⁺-doped β-BaZrF₆ is proposed. The ceramic has been prepared by crystallizing 60ZrF₄–35BaF₂–5BiF₃ glass doped with 3 wt % HoF₃. Exciting the Ho³⁺⁵I₇ level by a Tm:LiYF₄ (Tm:YLF) laser at λ = 1910 nm, we observed a strong red luminescence, due to the ⁵F₅ → ⁵I₈ transition, and a weaker, green luminescence, corresponding to the (⁵F₄, ⁵S₂) → ⁵I₈ transition. The threshold power density of the Tm:YLF laser at which a red spot was observed on a ceramic sample was 1.1 W/cm².     

Structure,electrical, and optical properties of ZnO-substituted PbO for the Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript> co-doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–GeO<Subscript>2</Subscript>–Na<Subscript>2</Subscript>O glass system

Glasses of the 0.5Er³⁺/2.5Yb³⁺ co-doped (40Bi₂O₃–20GeO₂–(30 − x)PbO–xZnO–10Na₂O system where x = 0.0, 5, 10, 15, 20, 25, and 30 mol%) have been characterized by FT-IR spectroscopy measurements to obtain information about the influence of ZnO-substituted PbO on the local structure of the glass matrix. The density and the molar volume have been determined. The influences of the ZnO-substituted PbO on the structure of glasses have been discussed. The dc conductivity measured in the temperature range 475–700 K obeys Arrhenius law. The conductivity decreases while the activation energy for conduction increases with increase ZnO content. The optical transmittance and reflectance spectrum of the glasses have been recorded in the wavelength range 400–1100 nm. The values of the optical band gap E _opt for all types of electronic transitions and refractive index have been determined and discussed. The real and imaginary parts ε₁ and ε₂ of dielectric constant have been determined.     

Effect of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> on the dynamics of Li<Superscript>+</Superscript> ions in Li<Subscript>2</Subscript>O·P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Lithium ion transport has been studied in bismuth lithium phosphate glasses in the frequency range 20 Hz–1 MHz and in the temperature range 423–573 K using impedance spectroscopy. The addition of Bi₂O₃ in Li₂O·P₂O₅ glass is related to the modification of the glass structure and facilitates the Li⁺ ions migration. The ac and dc conductivities, activation energy of the dc conductivity and relaxation frequency are extracted from the impedance spectra. Conductivity of the present glass system is found to be ionic in nature. The electrical response of the glasses has been studied using both conductivity and electric modulus formalisms. A single ‘master curve’ for normalized plots of all the modulus isotherms observed for a given composition indicates the temperature independence of the dynamic processes for ions in these glasses. Nearly identical values of activation energy for dc conduction and for conductivity relaxation time indicate that the ions overcome same energy barrier while conducting and relaxing.     

Synthesis of Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce<Superscript>3+</Superscript> phosphor in the Y<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al metal–CeO<Subscript>2</Subscript> ternary system

Garnet phosphor Y₃Al₅O₁₂:Ce³⁺ is prepared in the Y₂O₃–Al metal–CeO₂ ternary system by the solid-state reaction method in the air. For the first time, metal Al is used as a source of aluminum for the reaction instead of traditional oxide Al₂O₃. It is shown that the chemical reaction can be realized at lower temperatures and without use of special reducing atmosphere. The structural and spectroscopic properties of the prepared powder phosphor are very close to those earlier reported for the Y₃Al₅O₁₂:Ce³⁺ single crystal.     

Cathodoluminescence properties of SiO<Subscript>2</Subscript>:Pr<Superscript>3+</Superscript>and ZnO·SiO<Subscript>2</Subscript>:Pr<Superscript>3+</Superscript> phosphor nanopowders

The successful incorporation of ZnO nanoparticles in Pr³⁺-doped SiO₂ using a sol–gel process is reported. SiO₂:Pr³⁺ gels, with or without ZnO nanoparticles, were dried at room temperature and annealed at 600 °C. On the basis of the X-ray Diffraction (XRD) results, the SiO₂ was amorphous regardless of the incorporation of Pr³⁺ and nanocrystalline ZnO or annealing at 600 °C. The particles were mostly spherical and agglomerated as confirmed by Field Emission Scanning Electron Microscopy. Thermogravimetric analysis of dried gels performed in an N₂ atmosphere indicated that stable phases were formed at ≥900 °C. Absorption bands ascribed to ³H₄-³P_{(J = 0,1,2)}, ¹I₆ and ¹D₂ in the UV–VIS region were observed from SiO₂:Pr³⁺ colloids. The red cathodoluminescent (CL) emission corresponding to the ³P₀ → ³H₆ transition of Pr³⁺ was observed at 614 nm from dried and annealed SiO₂:Pr³⁺ powder samples. This emission was increased considerably when ZnO nanoparticles were incorporated. The CL intensity was measured at an accelerating voltage of 1-5 keV and a fixed beam current of 8.5 μA. The effects of accelerating voltage on the CL intensity and the CL degradation of SiO₂:Pr³⁺ and ZnO·SiO₂:Pr³⁺ were also investigated using Auger electron spectroscopy coupled with an Ocean Optics S2000 spectrometer.     

Variable—Range hopping in Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-K<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript> glasses

The dc conductivity of the glasses in the Fe₂O₃-Bi₂O₃-K₂B₄O₇ system was studied at temperatures between 223 and 393 K. At temperatures from 300 to 223 K, T^–1/4 (T is temperature) dependence of the conductivity was found, however, both Mott variable-range hopping and Greaves intermediate range hopping models are found to be applicable. Mott and Greaves parameters analysis gave the density of states at Fermi level N (E_F) = 3.13 × 10²⁰–21.01 × 10²⁰ and 1.93 × 10²¹–16.39 × 10²¹ cm^–3eV^–1 at 240 K, respectively. The variable-range hopping conduction occurred in the temperature range T = 300–223 K, since W_D was found to be large (W_D = 0.08–0.14 eV for these glasses) and dominated the conduction at T < 300 K.     

Y<Subscript>2</Subscript>O<Subscript>2</Subscript>S:Er<Superscript>3+</Superscript>,Ce<Superscript>3+</Superscript>—A new “invisible” IR phosphor

Ce³⁺ doping of Y₂O₂S:Er³⁺ can be used to suppress the visible anti-Stokes luminescence of the phosphor under excitation in the range 0.90–0.98 μm. We take advantage of this effect to create a new, efficient “invisible” IR phosphor emitting in the range 1.5–1.6 μm.     

Tunable luminescence and energy transfer properties in Ca<Subscript>2−x</Subscript>NaMg<Subscript>2</Subscript>V<Subscript>3</Subscript>O<Subscript>12</Subscript>:xEu<Superscript>3+</Superscript> phosphors

Novel broadband luminescence phosphors Ca_2?xNaMg₂V₃O₁₂:xEu³⁺ have been successfully prepared via the conventional high-temperature solid-state reaction. The effects of concentrations of doped Eu³⁺ and introducing Li⁺, K⁺ on the luminescent properties of phosphor were studied. X-ray diffraction, GSAS structural refinement and photoluminescence spectra were used to characterize the samples. The refinement data ensured where the doped Eu³⁺ ions occupied the lattice site in the host. Under 355 nm excitation, the emission peak of Ca₂NaMg₂V₃O₁₂:Eu³⁺ phosphors are located at 610 nm (red) ascribed to the electric dipole transition of Eu³⁺ from ⁵D₀ → ⁷F₂. In the range of 400–575 nm, Ca₂NaMg₂V₃O₁₂:Eu³⁺ phosphors have broad emission bands attributed to charge transfer of \({\text{VO}}_4^{3 - }\) group. Energy transfer mechanism, energy transfer efficiency and critical distance (R_c) of \({\text{VO}}_4^{3 - }\) → Eu³⁺ would be analyzed. The emitting color of Ca₂NaMg₂V₃O₁₂:Eu³⁺ could be tunable from blue-green to near white light.     

Synthesis and Structure of Mixed-Cation Salts with [PuO<Subscript>4</Subscript>(OH)<Subscript>2</Subscript>]<Superscript>3–</Superscript> Anions

Mixed-cation salts of the composition NaM₂[PuO₄(OH)₂]·4H₂O, where M = Rb (I) and Cs (III), and NaRb₅[PuO₄(OH)₂]₂·6H₂O (II) were synthesized and structurally characterized. The central Pu atom in [PuO₄(OH)₂]^3– anions has oxygen surrounding in the form of a tetragonal bipyramid with oxygen atoms of hydroxide ions in apical positions. The hydrated Na⁺ cations have oxygen surrounding in the form of a distorted octahedron. In the structure of I, there are two independent Rb⁺ cations with 10- and 12-vertex coordination polyhedra (CPs), and in the structure of II, three independent Rb⁺ cations with the 12-, 11-, and 13-vertex CPs. In the structure of III, the Cs⁺ cation has a 12-vertex CP. Frameworks of large Rb⁺ or Cs⁺ cations can be distinguished in the structure. The CPs of the Pu and Na atoms (I, III) sharing a common edge or the isolated CPs of the Pu and Na atoms (II) are incorporated in these frameworks. Hydrogen bonds influence the crystal packing and the geometric characteristics of the [PuO₄(OH)₂]^3– anions.     

Synthesis and Structure of Mixed-Cation Salts with [NpO<Subscript>4</Subscript>(OH)<Subscript>2</Subscript>]<Superscript>3–</Superscript> Anions

Mixed-cation salts of the general composition NaM₂[NpO₄(OH)₂]·4H₂O, where M = Rb (I, II) and Cs (III), were synthesized and structurally characterized. The compounds differ from each other in the structural organization. The Np central atom in [NpO₄(OH)₂]^3– anions has oxygen surrounding in the form of a tetragonal bipyramid with the O atoms of hydroxide ions in the apical positions. The hydrated Na⁺ cations have oxygen surrounding in the form of a distorted octahedron. In the structure of I, there are two independent Rb cations with 10- and 12-vertex coordination polyhedra, and in the structures of II and III the framework of large cations is built of 12-vertex Rb and Cs polyhedra. The coordination polyhedra of the Np and Na atoms, sharing a common edge (I, III), or chains of the coordination polyhedra of the Np and Na atoms, sharing common vertices (II), are accommodated in the channels of the frameworks. Hydrogen bonds influence the crystal packing and the geometric characteristics of the [NpO₄(OH)₂]^3– anions.     

Estimating the effect of C<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> and C<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack> radicals and neutral clusters on the fullerene formation

The mass spectrum of the products of arc discharge in helium between graphite electrodes has been studied for various values of the gas flow rate. As the gas flow rate increases, the intensity of C₆₀^±, C₇₀^±, C₈₄^± and C₉₀^± fullerene peaks increases and that of the C₂⁻ and C₃⁺ cluster radicals decreases, but the total decay in radicals amounts to only 21% of the total growth of fullerenes. From this it follows that a contribution to the formation of fullerenes from the neutral clusters (which are taken into account for the first time) significantly exceeds the contribution due to small radical species.     

Kinetics of Thermal Transformation of Mg<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript> · 8H<Subscript>2</Subscript>O to Mg<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The kinetics of thermal dehydration of Mg₃(PO₄)₂ · 8H₂O was investigated using thermogravimetry at four different heating rates. The activation energies of the dehydration step of Mg₃(PO₄)₂ · 8H₂O were calculated through the isoconversional Ozawa and Kissinger-Akahira-Sunose (KAS) methods and iterative methods, which were found to be consistent and indicate a single mechanism. The possible conversion function of the dehydration reaction for Mg₃(PO₄)₂ · 8H₂O has been estimated through the Coats and Redfern integral equation, and a better kinetic model such as random nucleation of the “Avrami–Erofeev equation (A _3/2 model)” was found. The thermodynamic functions (ΔH*, ΔG*, and ΔS*) of the dehydration reaction are calculated by the activated complex theory and indicate that it is a non-spontaneous process when the introduction of heat is not connected.     

Luminous properties of skin–core structure new luminous fiber: SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>,Dy<Superscript>3+</Superscript>-PET/light conversion agent-PET

SrAl₂O₄:Eu²⁺,Dy³⁺-polyethylene terephthalate (PET)/light conversion agent-PET, which is a new skin–core structure luminous fiber that can emit red light in the darkness, was fabricated by melt spinning with the combination of light conversion agent-PET and SrAl₂O₄:Eu²⁺,Dy³⁺-PET. An energy transfer occurred between SrAl₂O₄:Eu²⁺,Dy³⁺ and light conversion agent, and the light conversion agent emitted red light absorbed from SrAl₂O₄:Eu²⁺,Dy³⁺. To investigate the effect of light conversion agent on the luminous properties of SrAl₂O₄:Eu²⁺,Dy³⁺-PET-light conversion agent, several kinds of luminous fiber that contained different light conversion agents were artificially manufactured and their luminous properties were investigated. Results showed that under near-ultraviolet excitation, the fluorescent color of luminous fiber was primarily located in the orange-red area, with more intense red color than the others.     

The crystallographic orientation relationship between Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> in the composite material Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al–Mg–Si alloy

The formation mechanism of spinels on Al₂O₃ particles in the Al₂O₃/Al–1.0 mass% Mg₂Si alloy composite material has been investigated by transmission electron microscopy (TEM) in order to determine the crystallographic orientation relationship. A thin sample of the Al₂O₃/Al–Mg–Si alloy composite material was obtained by the FIB method, and the orientation relationship between Al₂O₃ and MgAl₂O₄, which was formed on the surface of Al₂O₃ particles, was discovered by the TEM technique as follows: