Isochoric Heat Capacity Measurements for 2,2-Dichloro-1,1,1-Trifluoroethane (R123) at Temperatures from 167 to 341 K and 1-Chloro-1,2,2,2-Tetrafluoroethane (R124) from 94 to 341 K at Pressures to 35 MPa

Molar heat capacities at a constant volume (C _v) of 2,2-dichloro-1,1,1-trifluoroethane (R123) and 1-chloro-1,2,2,2-tetrafluoroethane (R124) were measured with an adiabatic calorimeter. Temperatures ranged from 167 K for R123 and from 94 K for R124 to 341 K, and pressures were up to 33 MPa. Measurements were conducted on the liquid in equilibrium with its vapor and on compressed liquid samples. The samples were of a high purity, verified by chemical analysis of each fluid. For the samples, calorimetric results were obtained for two-phase (C ⁽²⁾ _v), saturated liquid (C or C _x ), and single-phase (C _v) molar heat capacities. The C data were used to estimate vapor pressures for values less than 100 kPa by applying a thermodynamic relationship between the saturated liquid heat capacity and the temperature derivatives of the vapor pressure. Due to the tendency of both R123 and R124 to subcool, the triple-point temperature (T _tr) and the enthalpy of fusion ( _fus H) could not be measured. The principal sources of uncertainty are the temperature rise measurement and the change-of-volume work adjustment. The expanded uncertainty (at the 2 level) for C _v is estimated to be 0.7%, for C ⁽²⁾ _v it is 0.5%, and for C it is 0.7%.     

Volumetric measurements under pressure for 2,2,4-trimethylpentane at temperatures up to 353.15 K and for benzene and three of their mixtures at temperatures up to 348.15 K

(p, V, T) data have been obtained in the form of volume ratios relative to 0.1 MPa for benzene (298.15 to 348.15 K), 2,2,4-trimethylpentane (TMP) (313.15 to 353.15 K), and their mixtures near 0.25, 0.5, and 0.75 mole fraction of benzene (313.15 to 348.15 K) for pressures up to near the freezing pressures for benzene and the mixtures, and up to 400 MPa for TMP. Isothermal compressibilitiesκ _T, isobaric expansivitie α, changes in heat capacity at constant pressureΔC _p, and excess molar volumesV ^E have been determined from the data. Literature data at atmospheric pressure have been used to convert theΔC _p toC _p at several temperatures. The isobars for α over the temperature range 278.15 to 353.15 K for TMP intersect near 47 MPa and reverse their order in temperature when plotted against pressure; normalization of the α's by dividing the values at each temperature by the α at 0.1 MPa prevents both the intersection and the reversal of the order. TheV ^E are positive and have an unusual dependence on pressure: they increase with temperature and pressure so that the order of the curves for 0.1, 50, and 100 MPa changes in going from 313.15 to 348.15 K.     

Thermophysical properties ofm-cresol as a function of temperture (303 to 503 K) and pressure (0.1 to 400 MPa)

Measured and derived thermophysical properties ofm-cresol are reported for pressures up to 400 MPa at temperatures from 303 to 503 K. Isobaric thermal expansivities were measured by pressure-scanning calorimetry from 303 to 503 K and 0.1 to 400 MPa. The specific volume at 353 K was determined by pycnometry at atmospheric pressure and calculated from isothermal compressibilities measured as a funtion of pressure up to 400 MPa. Specific volumes at other temperatures and pressures are calculated from isothermal compressibilities measured as a function of pressure up to 400 MPa. Specific volumes, isothermal compressibilities, thermal coefficients of pressure, and isobaric and isochoric heat capacities at pressures up to 400 MPa are derived at several temperatures. The effects of pressure on the isobaric heat capacities ofm-cresol,n-hexane, and water are compared. The effects of self-association ofm-cresol are apparent in both the thermal expansivity and the heat capacity data.     

Molar Heat Capacity at Constant Volume of 1,1-Difluoroethane (R152a) and 1,1,1-Trifluoroethane (R143a) from the Triple-Point Temperature to 345 K at Pressures to 35 MPa

Molar heat capacities at constant volume (C _v) of 1,1-difluoroethane (R152a) and 1,1,1-trifluoroethane (R143a) have been measured with an adiabatic calorimeter. Temperatures ranged from their triple points to 345 K, and pressures up to 35 MPa. Measurements were conducted on the liquid in equilibrium with its vapor and on compressed liquid samples. The samples were of high purity, verified by chemical analysis of each fluid. For the samples, calorimetric results were obtained for two-phase ((C _v ⁽²⁾ ), saturated-liquid (C or C _x ^' ), and single-phase (C _v) molar heat capacities. The C data were used to estimate vapor pressures for values less than 105 kPa by applying a thermodynamic relationship between the saturated liquid heat capacity and the temperature derivatives of the vapor pressure. The triple-point temperature and the enthalpy of fusion were also measured for each substance. The principal sources of uncertainty are the temperature rise measurement and the change-of-volume work adjustment. The expanded relative uncertainty (with a coverage factor k=2 and thus a two-standard deviation estimate) for C _v is estimated to be 0.7%, for C _v ⁽²⁾ it is 0.5%, and for C it is 0.7%.     

Isobaric thermal expansivities of binary mixtures ofn-Hexane with 1-hexanol at pressures from 0.1 to 350 MPa and at temperatures from 303 to 503 K

Isobaric thermal expansivities, α_p(p, T), of seven binary mixtures ofn-hexane with l-hexanol (0.0553, 0.1088, 0.2737, 0.2983, 0.4962, 0.6036, and 0.7455 mol fraction of l-hexanol) have been measured with a pressure-controlled scanning calorimeter over the pressure range from just above the saturation pressures to 350 MPa and at temperatures from 302.6 to 503.1 K. The low-temperature isotherms of α_p for particular mixtures observed with respect to the unique crossing point ofn-hexane isotherms reveal an association effect which is reduced when the temperature increases. The high-temperature isotherms of α_p are very similar to the isotherms of puren-hexane, especially for lower mole fractions ofn-hexanol. No known equation of state can reproduce these properties.     

Thermodynamic properties and excess volumes of 2,2,4-trimethylpentane + n-heptane mixtures from 298 to 338 K for pressures up to 400 MPa

(p, V, T) data for mixtures of 2,2,4-trimethylpentane (TMP) and heptane have been obtained in the form of volume ratios for four temperatures in the range 298.15 to 338.15 K for pressures up to 390 MPa. The data have been represented by the Tait equation of state for the purposes of interpolation and extrapolation. The atmospheric pressure densities of both pure components and their mixtures for three temperatures have been measured and used to determine the excess molar volumes. Isothermal compressibilities have been evaluated from the volumetric data.     

p,V, T and derived thermodynamic data for bromobenzene at temperatures from 278 to 323 K and pressures up to 280 MPa

Experimentally determined p, V, T data are reported for bromobenzene at 278, 288, 298, 313, and 323 K, at pressures up to about 280 MPa or (at 278 and 288 K) a lower pressure slightly below the freezing pressure at the temperature of measurement. Values of the isobaric expansivity, isothermal compressibility, internal pressure, and equivalent hard-sphere diameter, derived from the p, V, T data, are presented.On leave from the Department of Chemistry, The University of Auckland, Auckland, New Zealand.