Thermoresponsive core-shell-corona micelles of poly(ethyleneglycol)-b-poly(N-isopropylacrylamide)-b-polystyrene

Core-shell-corona micelles with a thermoresponsive shell self-assembled by triblock copolymer of poly(ethyleneglycol)-b-poly(N-isopropylacrylamide)-b-polystyrene (PEG₄₅-b-PNIPAM₁₆₈-b-PS₄₆) are studied by ¹H NMR, light scattering and atomic force microscopy. The thermoresponsive triblock copolymer, which has a relatively short hydrophobic PS block, can disperse in water at room temperature to form core-shell-corona micelles with the hydrophobic PS block as core, the thermoresponsive PNIPAM block as shell and the hydrophilic PEG block as corona. At temperature above lower critical solution temperature (LCST) of the PNIPAM block, the PNIPAM chains gradually collapse on the PS core to shrink the size and change the structure of the resultant core-shell-corona micelles with temperature increasing. It is found that there possibly exists an interface between the PNIPAM shell and PEG corona of the core-shell-corona micelles at temperature above LCST of the PNIPAM block.     

One-pot synthesis of poly(N-vinylcaprolactam)-based biocompatible block copolymers using a dual initiator for ROP and RAFT polymerization

Thermosensitive, biocompatible poly(ε-caprolactone)-b-poly(N-vinylcaprolactam) (PCL-b-PVCL), poly(δ-valerolactone)-b-PVCL, and poly(trimethylene carbonate)-b-PVCL block copolymers were synthesized at 30 °C using a hydroxyl-functionalized xanthate reversible addition-fragmentation chain transfer (RAFT) agent, 2-hydroxyethyl 2-(ethoxycarbonothioylthio)propanoate (HECP), as a dual initiator for ring-opening polymerization (ROP) and RAFT polymerization in a one-pot procedure. The hydrophobic blocks were first synthesized by the ROP of cyclic monomers using diphenyl phosphate (DPP) as a catalyst and the RAFT polymerization of the PVCL block was followed by adding N-vinylcaprolactam (VCL) and 2,2′-azobis(4-methoxy-2,4-dimethyl valeronitrile) (V-70) as an initiator to the reaction mixture. This novel one-pot process is convenient and powerful method for the synthesis of the PVCL-based biocompatible block copolymers. The lower critical solution temperature (LCST) of the PVCL-based biocompatible block copolymer can be readily tuned by controlling the hydrophobicity of the block copolymers. By copolymerizing a hydrophilic N-vinylpyrrolidone moiety to the PVCL blocks by RAFT copolymerization, the LCST of the copolymer was matched with the body temperature for its future biomedical applications.     

Synthesis and characterization of temperature-responsive copolymer of PELGA modified poly(N-isopropylacrylamide)

Novel amphiphilic PELGA modified temperature-responsive copolymer, [(poly(methoxyethylene glycol)-co-poly(lactic acid)-co-poly-(glycolic acid))acrylate-co-poly(N-isopropylacrylamide)-co-poly(N-hydroxymethylacrylamide)] (PELGAA-co-PNIPAAm-co-PNHMAAm) was synthesized by incorporating PELGA as the amphiphilic moiety into poly(N-isopropylamide) with various LA/GA ratios. Polymers obtained were characterized by FT-IR, GPC, ¹H-NMR and DSC. The lower critical solution temperature (LCST) of the copolymeric nanoparticles was 40±0.6 °C, the critical aggregation concentration (CAC) was 18 mg L⁻¹, and reversible change in nanoparticle size related to temperature was fluctuated between 210±10 and 109±26 nm, while change in zeta potential of the nanoparticles was between −36±6 and −26±4 mV. The transmission electron microscopy (TEM) images of nanoparticles were also presented.     

Double-responsive core-shell-corona micelles from self-assembly of diblock copolymer of poly(t-butyl acrylate-co-acrylic acid)-b-poly(N-isopropylacrylamide)

Self-assembly of poly(t-butyl acrylate-co-acrylic acid)-b-poly(N-isopropylacrylamide) [P(tBA-co-AA)-b-PNIPAM], which was obtained from part hydrolysis of PtBA-b-PNIPAM synthesized by sequential atom transfer radical polymerization (ATRP) was studied. Thermo- and pH-responsive core-shell-corona (CSC) micelles with different structures were formed from (PtBA-co-PAA)-b-PNIPAM in aqueous solution. At pH 5.8 and 25 °C, the block copolymer self-assembled into spherical core-shell micelles with hydrophobic PtBA segments as the core, hydrophilic PAA/PNIPAM segments as the mixed shell. Increasing temperatures, core-shell micelles converted into CSC micelles with PtBA as the core, collapsed PNIPAM as the shell and soluble PAA as the corona. Moreover, decreasing pH at 25 °C, PAA chains collapsed onto the core resulting in CSC micelles with PtBA as the core, PAA as the shell and PNIPAM as the corona.     

Syntheses of well-defined poly(siloxane)-b-poly(styrene) and poly(norbornene)-b-poly(styrene) block copolymers using functional alkoxyamines

Functional alkoxyamines, 1-[4-(4-lithiobutoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (2) and 1-[4-(2-vinyloxyethoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (3) were prepared, and well-defined poly(hexamethylcyclotrisiloxane)-b-poly(styrene)[poly(D₃)-b-poly(St)] and poly(norbornene)-b-poly(St) [poly(NBE)-b-poly(St)] were prepared using the alkoxyamines. The first step was preparation of poly(D₃) and poly(NBE) macroinitiators, which were obtained by the ring-opening anionic polymerization of D₃ using 2 as an initiator and the ring-opening metathesis polymerization of NBE using 3 as a chain transfer. The radical polymerization of St by the poly(D₃) and poly(NBE) macroinitiators proceeded in the ‘living’ fashion to give well-defined poly(D₃)-b-poly(St) and poly(NBE)-b-poly(St) block copolymers.     

Novel polyion complex with interpenetrating polymer network of poly(acrylic acid) and partially protected poly(vinylamine) using N-vinylacetamide and N-vinylformamide

Poly(vinylamine), the simplest polycation with primary amines, was applied to interpenetrating polymer networks (IPN) with poly(acrylic acid). N-Vinylformamide (NVF) was employed for amino-protected monomers to control electrostatic balance. pH-responsivities of IPNs varied, depending on the hydrolysis conditions and acrylic acid (AAc) concentration of the second network. Poly(N-vinylacetamide)-co-poly(N-vinylformamide) (4/6, mol/mol) was employed for the first network, subsequently hydrolyzed with 50% amide groups, and the second network was polymerized with 0.25 mol L⁻¹ AAc, extremely shrunken hydrogels with polyion complex were formed at pH 7, showing that the controlled amount of highly active primary amines are available in IPN.     

Temperature- and pH-sensitive membrane formed from blends of poly(vinylidene fluoride)-graft-poly(N-isopropylacrylamide) and poly(acrylic acid) microgels

Temperature- and pH-responsive membranes prepared from blends of poly(vinylidene fluoride)-graft-poly(N-isopropylacrylamide)(PVDF-g-PNIPAM) copolymer and poly(acrylic acid) (PAA) microgels in N,N-dimethylformamide (DMF) solution by phase inversion method. PAA microgels help PNIPAM chains largely enrich onto membrane surface. Furthermore, adding PAA microgels increases the porous size, porosity and hydrophilic property of the blend membrane. The membranes show temperature-sensitivity between 30 and 35 °C, and pH-sensitivity between pH 3 and 5 on permeating aqueous solutions. Meanwhile, the blend membranes keep good antifouling property even if one of the hydrophilic components becoming hydrophobic in response to temperature or pH stimuli, which is superior to single-sensitive PVDF membrane.     

Controllable synthesis of poly(N-vinylpyrrolidone) and its block copolymers by atom transfer radical polymerization

At room temperature atom transfer radical polymerization (ATRP) of N-vinylpyrrolidone (NVP) was carried out using 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetra-azacyclo-tetradecane (Me₆Cyclam) as ligand in 1,4-dioxane/isopropanol mixture. Methyl 2-chloropropionate (MCP) and copper(I) chloride were used as initiator and catalyst, respectively. The polymerization of NVP via ATRP could be mediated by the addition of CuCl₂. The resultant poly(N-vinylpyrrolidone) (PNVP) has high conversion of up to 65% in 3 h, a controlled molecular weight close to the theoretical values and narrow molecular weight distribution between 1.2 and 1.3. The living nature of the ATRP for NVP was confirmed by the experiments of PNVP chain extension. With PNVP-Cl as macroinitiator and N-methacryloyl-N′-(α-naphthyl)thiourea (MANTU) as a hydrophobic monomer, novel fluorescent amphiphilic copolymers poly(N-vinylpyrrolidone)-b-poly(N-methacryloyl-N′-(α-naphthyl)thiourea) (PNVP-b-PMANTU) were synthesized by ATRP. PNVP-b-PMANTU copolymers were characterized by ¹H NMR, GPC-MALLS and fluorescence measurements. The results revealed that PNVP-b-PMANTU presented a blocky architecture.     

Synthesis and characterization of azobenzene-functionalized poly(styrene)-b-poly(vinyl acetate) via the combination of RAFT and “click” chemistry

Here, we described a strategy for preparing well-defined block copolymers, poly(styrene)-b-poly(vinyl acetate) (PS-b-PVAc), containing middle azobenzene moiety via the combination of the reversible addition-fragmentation chain transfer (RAFT) polymerization and “click” chemistry. Firstly, a novel RAFT agent containing α-alkyne and azobenzene chromophore in R group, 2-(3-ethynylphenylazophenoxycarbonyl)prop-2-yl-9H-carbazole-9-carbodithioate (EACDT), was synthesized and used to mediate the RAFT polymerization of styrene (St). Well-defined α-alkyne end-functionalized poly(styrene) (PS) was obtained. Secondly, the RAFT polymerization of vinyl acetate (VAc) was conducted using functionalized RAFT reagent with ω-azide structure in Z group, O-(2-azidoethyl) S-benzyl dithiocarbonate (AEBDC). Well-defined ω-azide end-functionalized poly(vinyl acetate) (PVAc) was obtained. Afterwards, the resulting α-alkyne terminated PS was coupled by “click” chemistry with the azide terminated PVAc. The block copolymer, PS-b-PVAc, was obtained with tailored structures. The products from each step were characterized and confirmed by GPC, ¹H NMR, IR and differential scanning calorimetry (DSC) examination. Kinetics of the trans-cis-trans isomerization from azobenzene chromophore in PS-b-PVAc and PS were investigated in CHCl₃ solutions.     

Synthesis and characterization of poly(ethylene glycol)-b-poly (l-lactide)-b-poly(l-glutamic acid) triblock copolymer

A biodegradable amphiphilic triblock copolymer of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-glutamic acid) (PEG-b-PLLA-b-PLGA) was obtained by catalytic hydrogenation of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(γ-benzyl-l-glutamic acid) (PEG-b-PLLA-b-PBLGA) synthesized by the ring-opening polymerization (ROP) of N-carboxyanhydride of γ-benzyl-l-glutamate (BLG-NCA) with amino-terminated MPEG-b-PLLA-NH₂ as a macroinitiator. MPEG-b-PLLA-NH₂ converted from MPEG-b-PLLA-OH first reacted with tert-Butoxycarbonyl-l-phenylalanine (Phe-^NBOC) and dicyclohexylcarbodiimide (DCC) and then deprotected the tert-butoxycarbonyl group. MPEG-b-PLLA-OH was prepared by ROP of l-lactide with monomethoxy poly(ethylene glycol) in the presence of stannous octoate. The triblock copolymer and its diblock precursors were characterized by ¹H NMR, FTIR, GPC and DSA (drop shape analysis) measurements. The lengths of each block polymers could be tailored by molecular design and the ratios of feeding monomers. The triblock polymer PEG-b-PLLA-b-PLGA containing carboxyl groups showed obviously improved hydrophilic properties and could be a good potential candidate as a drug delivery carrier.     

Thermosensitive poly(N-isopropylacrylamide)-b-poly(ε-caprolactone) nanoparticles for efficient drug delivery system

To investigate thermosensitive polymeric nanoparticle, amphiphilic block copolymers of poly(N-isopropylacrylamice)-b-poly(ε-caprolactone) (PNPCL) with different PCL block lengths were synthesized by hydroxy-terminated poly(N-isopropyoacrylamide) (PNiPAAm) initiated ring opening polymerization of ε-caprolactone. Owing to their amphiphilic characteristics, the block copolymers formed self-assembled polymeric nanoparticles in aqueous milieus with thermosensitive PNiPAAm shell compartment. The characterizations of the nanoparticles revealed that the PNPCL nanoparticles showed PCL block length dependent physicochemical characters such as particle sizes, critical aggregation concentrations, and core hydrophobicities. Moreover, the thermosensitive PNiPAAm shells conferred unique temperature responsive properties such as phase transitions with temperature elevation over its lower critical solution temperature (LCST). The temperature induced phase transition resulted in the formation of PNiPAAm hydrogel layer on the PNPCL nanoparticle surface. The drug release tests revealed that the formation of thermosensitive hydrogel layer resulted in the enhanced sustained drug release patterns by acting as an additional diffusion barriers. Therefore, the introduction of thermosensitive polymers on polymeric nanoparticles might be a potential approaches to modulate drug release behaviors.     

Synthesis of thermosensitive poly(N-alkylacrylamide) gels and core-shell type gels

When the poly(acrylic acid) (PAA) gel-1,8-diazabicyclo-[5,4,0]-7-undecene salt (DAA) was placed in N-methyl-2-pyrrolidone containing an excess of alkylamine and triphenylphosphine, selective amidation took place from the outside to give the corresponding poly(N-alkylacrylamide) gel containing a C3 alkyl chain through a DAA-poly(N-alkylacrylamide) type gel capsule consisting of a hydrophilic unreacted core part and an amidated shell layer. The amidation proceeded by a reaction mechanism similar to the unreacted-core model. Thermal properties of the resulting poly(N-alkylacrylamide) gels such as deswelling behavior and equilibrium swelling ratio in water as a function of temperature were measured. The release of methyl orange from a poly(N-alkylacrylamide) gel and the gel capsule was also examined. PAA-poly(N-alkylacrylamide) type gel capsules containing a PAA core part and thermosensitive poly(N-alkylacrylamide) shell layer, prepared by the neutralization of DAA-poly(N-alkylacrylamide) type gel capsules, showed on-off chemical release characteristics in response to stepwise temperature changes across the LCST.     

Co-aggregation process of poly(ethylene oxide)-b-polybutadiene/poly(acrylic acid) based on evolution of interpolymer hydrogen bonding in solutions

The co-aggregation process of a diblock copolymer poly(ethylene oxide)-block-polybutadiene (PEO-b-PB) and a homopolymer poly(acrylic acid) (PAA) in solutions was studied. The number-average molecular weights of both the PEO and PB blocks are 5100 g/mol; the weight-average molecular weight of PAA is ∼2000 g/mol. The co-aggregation was induced by adding a PB selective solvent (i.e., alkane or cycloalkane) into the THF solution of the two polymers, with the processes characterized by turbidity, ¹H NMR, dynamic light scattering, and microscopy experiments. During the selective solvent titration, the solution underwent a macro-phase separation that was mainly related to PAA, followed by a micro-phase separation that corresponded to the formation of vesicles with the shell of PB block and the core of PAA/PEO complex. The experimental results indicated that the evolution of interpolymer hydrogen bonding complexation between the PAA and PEO blocks determined the co-aggregation process. The loose and soluble interpolymer complex could be formed at rather low selective solvent content (f). The complexation was enhanced with increasing f, resulting in “redissolving” the PAA-rich domains in the blend solutions. Afterwards, the more compact PAA/PEO complex chemically linked with a soluble PB block acted as the building blocks to form the vesicles at higher f.     

Multifunctional and thermoresponsive unimolecular micelles for tumor-targeted delivery and site-specifically release of anticancer drugs

Considering the fact that tumors have a lower pH value and a higher temperature than a normal tissue, a new type of thermoresponsive and biodegradable micelles, based on the H40-poly(?-caprolactone)-b-poly(N-isopropylacrylamide-co-acrylamide)-fluorescein methyl ester/b′-methoxy poly(ethylene glycol)/poly(ethylene glycol)-folate (i.e., H40-PCL-b-P(NIPAAm-co-AAm)-FL/b′-MPEG/PEG-FA (HPPNAP-FA)) with imaging and targeting moieties on the periphery were developed for the tumor-targeted delivery and temperature-induced site-specifically release of hydrophobic anticancer drugs. The amphiphilic HPPNAP-FA copolymer was able to self-assemble into unimolecular micelles in aqueous solution with an average diameter of 65 nm. The lower critical solution temperature (LCST) of micelles was around 39.5 °C. The anticancer drug, paclitaxel (PTX), was encapsulated into the multifunctional micelles. In vitro release studies demonstrated that the drug-loaded delivery system is relatively stable at physiologic conditions but susceptible to mild acidic environments and temperatures above LCST which would trigger the release of encapsulated drugs. Both flow cytometry and fluorescent microscopy showed that the cellular uptake of the PTX-loaded HPPNAP-FA micelles is higher than that of the PTX-loaded HPPNAP because of the folate receptor mediated endocytosis. The efficacy of this thermoresponsive drug delivery system was also evaluated at temperatures above the LCST (40 °C); the results demonstrated that the cellular uptake and the cytotoxicity of PTX-loaded micelles increase prominently. These results indicate that these multifunctional and thermoresponsive unimolecular micelles are promising biomaterials to improve the delivery efficiency and cancer specificity of hydrophobic chemotherapeutic drugs.     

Thermosensitive poly(N-isopropylacrylamide) nanocapsules with controlled permeability

In this paper, novel thermosensitive poly(N-isopropylacrylamide) (PNIPAM) nanocapsules with temperature-tunable diameter and permeability are reported. Firstly, the core-shell composite microparticles were synthesized by precipitation polymerization with isothiocyanate fluorescein (FITC) entrapped SiO₂ as core and cross-linked PNIPAM as shell. Then, the SiO₂ core was etched by hydrofluoric acid at certain condition and the pre-trapped FITC molecules remained within the inner cavity. The FITC release profile and TEM studies clearly indicate that the release behavior of FITC could be controlled effectively by the external temperature. Above the LCST of PNIPAM (32 °C), the dehydrated PNIPAM shell inhibited the release of FITC from the internal cavity while below its LCST, the fluorophore could permeate the swollen shell easily.     

Association behavior of thermo-responsive block copolymers based on poly(vinyl ethers)

Thermo-sensitive nanosized structures have been prepared in water from poly(methyl vinyl ether)-block-poly(isobutyl vinyl ether) (PMVE-b-PIBVE) block copolymers. The composition and the architecture (diblock and triblock architectures) of the PMVE-b-PIBVE copolymers have been varied. The investigated copolymers had an asymmetric composition with a major PMVE block. While the PIBVE blocks are hydrophobic, the PMVE blocks are hydrophilic at room temperature and become hydrophobic above their demixing temperature (around 36 °C) as a result of the lower critical solution temperature (LCST) behavior. At room temperature, the amphiphilic copolymers aggregate in water above a critical micelle concentration, which has been experimentally measured by hydrophobic dye solubilization. The hydrodynamic diameter of the structures formed above the cmc has been measured by dynamic light scattering (DLS) while their morphology has been studied by transmission electron microscopy (TEM). ¹H NMR measurements in D₂O at room temperature reveal that the aggregates contain PIBVE insoluble regions surrounded by solvated PMVE chains. These investigations have shown that polydisperse spherical micelles are formed for asymmetric PMVE-b-PIBVE copolymers containing at least 9 IBVE units. For copolymers containing less IBVE units, loose aggregates are formed.Finally, the thermo-responsive, reversible properties of these structures have been investigated. Above the cloud point of the copolymers, the loose aggregates precipitate while the micelles form large spherical structures.     

Synthesis of PAA-g-PNIPAM well-defined graft polymer by sequential RAFT and SET-LRP and its application in preparing size-controlled super-paramagnetic Fe3O4 nanoparticles as a stabilizer

A series of well-defined double hydrophilic graft copolymers, poly(acrylic acid)-g-poly(N-isopropylacrylamide) (PAA-g-PNIPAM), was employed as a novel water-soluble coating for constructing superparamagnetic iron oxide nanoparticles. The copolymer was synthesized via a three-step procedure: firstly, a well-defined hydrophobic PtBA-based backbone, poly(tert-butyl 2-((2-chloropropanoyloxy)-methyl)acrylate)-co-poly(tert-butyl acrylate), (PtBCPMA₁₉-co-PtBA₁₈), was prepared through RAFT copolymerization of a new trifunctional acrylic monomer, tert-butyl 2-((2-chloropropanoyloxy)methyl)acrylate and tert-butyl acrylate; secondly, taking this backbone as a macroinitiator to initiate SET-LRP of N-isopropylacrylamide resulted in well-defined (poly(tert-butyl 2-((2-chloropropanoyloxy)methyl)-acrylate)-co-poly(tert-butyl acrylate))-g-poly(N-isopropylacrylamide) ((PtBCPMA-co-PtBA)-g-PNIPAM) amphiphilic graft copolymers with relatively narrow polydispersities (M_w/M_n ≤ 1.31); thirdly, handling (PtBCPMA-co-PtBA)-g-PNIPAM in acidic conditions afforded PAA-g-PNIPAM graft copolymers. The resulting PAA-g-PNIPAM copolymers were directly utilized as a polymeric stabilizer in the preparation of superparamagnetic Fe₃O₄ nanoparticles. The particle size can be readily tuned in the range of 12.1–23.2 nm by varying the amount of PAA-g-PNIPAM copolymer or the length of PNIPAM side chain. Besides, the structure and properties of prepared Fe₃O₄/polymer nanocomposites were characterized by XRD, FT-IR, TGA, TEM, and magnetic measurement in detail.     

Synthesis and thermo-responsive behavior of fluorescent labeled microgel particles based on poly(N-isopropylacrylamide) and its related polymers

Poly(N-isopropylacrylamide) (PNIPAM) microgel particles labeled with 3-(2-propenyl)-9-(4-N,N-dimethylaminophenyl)phenanthrene (VDP) as an intramolecular fluorescent probe were prepared by emulsion polymerization. The thermo-responsive behavior of the VDP-labeled PNIPAM microgel particles dispersed in water was studied by turbidimetric and fluorescence analyses. The transition temperature of the VDP-labeled PNIPAM microgel particles in water determined by turbidimetric analysis was ca. 32.5 °C. The wavelength at the maximum fluorescence intensity of the VDP units linked directly to the microgel particles dramatically blue-shifted around the transition temperature. In addition it gradually blue-shifted even below the transition temperature where there was no change observed in the turbidity. These findings suggest that the gradual shrinking of microgel particles occurs with increasing temperature and the subsequent dramatic shrinking results in the increasing in the turbidity. The transition temperatures of VDP-labeled poly(N-n-propylacrylamide) and poly(N-isopropylmethacrylamide) microgel particles determined by turbidimetric analysis were ca. 23 and ca. 42.5 °C, respectively, and their thermo-responsive behavior was similar to that for the VDP-labeled PNIPAM system. In these three systems the microenvironments around the fluorescent probes above the transition temperatures became more hydrophobic than those below the transition temperature, and the estimated values of microenvionmental polarity around the VDP units on their collapsed states were almost the same.     

pH responsive nanoplates from bulk self-assembly of UV-crosslinkable poly(tert-butyl acrylate)-block-poly(2-cinnamoyloxyethyl methacrylate)

We report the dispersed nanoplates prepared from bulk self-assembly of diblock copolymer poly(tert-butyl acrylate)-block-poly(2-cinnamoyloxyethyl methacrylate) (PtBA-b-PCEMA) with PCEMA as a UV-crosslinkable segment and PtBA as a hydrolysable segment. PtBA-b-P(HEMA-TMS) was synthesized through a two step ATRP and functionalized to PtBA-b-PCEMA. The diblock copolymer with 55.7 % weight ratio of PCEMA bulk was assembled into lamellar morphology and characterized by small-angle X-ray scattering (SAXS). After UV-crosslinking, the dispersed nanoplates were prepared by dispersing the crosslinked bulk self-assembly in a good solvent of the PtBA segment and characterized by transmission electron microscopy (TEM). The dispersed nanoplates have crosslinked PCEMA as the cores and the solubilized PtBA as the coronas. After hydrolysis of the PtBA segment into poly(acrylic acid) (PAA), the crosslinked nanoobjects could be dispersed in water and showed reversible pH-responsibility.     

Preparation and properties of poly(ethylene glycol)-block-poly(acrylic acid)-coated cobalt nanocrystals

Reported in this paper are the preparation and properties of ?-Co nanocrystals coated by poly(ethylene glycol)-block-poly(acrylic acid) (PEG-b-PAA). These particles were prepared via the thermal decomposition of Co₂(CO)₈ at 185 °C in 1,2-dichlorobenzene, in the presence of the surfactant PEG-b-PAA and the co-surfactant trioctylphosphine oxide. At a given initial Co₂(CO)₈ concentration, the size of the particles increased with increasing Co₂(CO)₈-to-PEG-b-PAA molar ratio, and could be tuned between ∼5 and ∼20 nm. The size distribution of the particles narrowed as the Co₂(CO)₈ concentrations increased. The resultant particles were dispersible in a wide range of solvents, including chloroform, N,N-dimethylforamide, and water, which solubilized PEG. Magnetic measurements revealed that the particles possessed saturation magnetization close to that of bulk Co, suggesting high purity of the particles.