Controlled synthesis and characterizations of amphiphilic poly[(R,S)-3-hydroxybutyrate]-poly(ethylene glycol)-poly[(R,S)-3-hydroxybutyrate] triblock copolymers

Well-defined biodegradable amphiphilic triblock copolymers consisting of atactic poly[(R,S)-3-hydroxybutyrate] (PHB) and poly(ethylene glycol) (PEG) as the side hydrophobic block and middle hydrophilic block were synthesized via ring opening polymerization of (R,S)-β-butyrolactone from PEG macroinitiators and characterized using NMR, GPC, FT-IR, XRD, DSC and TG analyses. The controlled synthesis was made possible by the facile synthesis of pure PEG macroinitiators through a TEMPO-mediated oxidation. Constituting 40-70 wt% of the copolymer content, PHB blocks grown were amorphous while PEG formed crystalline phase when segment was sufficiently long. While hindering PEG crystallization, atactic PHB mixed well with amorphous PEG to give single T_g in all the copolymers. The copolymers exhibited two-step thermal degradation profile starting with PHB degradation from 210 to 300 °C, then PEG from 350 to 450 °C.     

Hydrolytic degradation of poly[(R)-3-hydroxybutyric acid] in the melt

Poly[(R)-3-hydroxybutyric acid] [R-P(3HB)] was hydrolyzed in high-temperature and high-pressure water at the temperature range of 180-300 °C and for a period of 360 min. The formation, racemization, and decomposition of 3-hydroxybutyric acids (3HBs) and molecular weight change of R-P(3HB) were investigated. The highest yield of (R)-3-hydroxybutyric acid (R-3HB), ca. 80%, was obtained at 200 °C in the hydrolytic degradation periods of 240-360 min. Too-high hydrolytic degradation temperature such as 300 °C induced the decomposition and racemization of formed 3HBs, resulting in decreased yield of R-3HB. The hydrolytic degradation of R-P(3HB) proceeds homogeneously and randomly via a bulk erosion mechanism. The molecular weight of R-P(3HB) decreased exponentially without formation of low-molecular-weight specific peaks originating from crystalline residues. The hydrolytic degradation rates in the melt estimated from M_n changes were lower for R-P(3HB) than for poly(l-lactide) (PLLA) in the temperature range of 180-220 °C. The activation energy for the hydrolytic degradation (ΔE_h) of R-P(3HB) in the melt (180-250 °C) was 30.0 kcal mol⁻¹, which is higher than 12.2 kcal mol⁻¹ for PLLA in the melt in the temperature range (180-250 °C). This study reveals that hydrolytic degradation of PHB in the melt is an effective and simple method to obtain (R)-3HB and to prepare R-P(3HB) having different molecular weights without containing the specific low-molecular-weight chains, because of the removal of the effect caused by crystalline residues.     

Surface structure of folded-chain crystals of poly(R-3-hydroxybutyrate) of different chain length

The structure of the crystalline-amorphous interface of poly(R-3-hydroxybutyrate) (PHB) of different molar mass is evaluated by analysis of the rigid amorphous fraction and by analysis of the degree of reversible melting and crystallization. The rigid amorphous fraction of low-molar-mass PHB of 5 kDa is only 5-10%, and at best half of that of high-molar-mass PHB of almost 500 kDa, despite identical crystallinity. This result is paralleled by observation of distinctly larger degree of reversible melting and crystallization in PHB of high molar mass. The larger rigid amorphous fraction and higher degree of reversible melting and crystallization in PHB of high molar mass, consistently and independently, prove enhanced covalent coupling of crystals and amorphous structure, and/or de-coupling of segments of macromolecules which traverse between phases, respectively. The distinct isolation of crystals in PHB of low molar mass is discussed in terms of absence of wide loops/folds, long-chain cilia, and tie-molecules.     

Solid-state NMR study on the structure and mobility of the noncrystalline region of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The noncrystalline structures of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) copolymers were studied by variable temperature solid-state wide-line ¹H NMR and solid-state high-resolution ¹³C NMR spectroscopy. It is found that at room temperature there exists a rich and rigid component in the noncrystalline region of PHB and PHBV. The content of this component decreases with the increase in 3-hydroxyvalerate content in PHBV and with the increase in temperature. The brittleness of PHB may be partly attributed to the rigidness of the noncrystalline region at room temperature, while the improvement of the properties of PHBV may come from the enhanced mobility of the noncrystalline region.     

Analysis of inner structure in high-strength biodegradable fibers by X-ray microtomography using synchrotron radiation

The observation of the inner structure of materials without pretreatment or damage is a very useful analytical method in the field of materials science as well as in medicine and biology. We have carried out a three-dimensional (3D) analysis of biodegradable polyester bacterial-poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate] (P(3HB-co-3HV)) fibers with high tensile strength (1.07 GPa) using X-ray microtomography with synchrotron radiation. The inner structure of the fibers was visualized at a spatial resolution of 1 μm. There are many fine voids for one-step-drawn P(3HB-co-3HV) fibers after isothermal crystallization from the result of X-ray microtomography. This revealed that the clear streak reflection along the equator in small-angle X-ray scattering is caused by these fine voids. The recalculated tensile strength of one-step-drawn P(3HB-co-3HV) fibers after isothermal crystallization is suggested to be 2.02 GPa, taking the cross-section area with 52.7% (polymer region) into consideration. These fine voids in fibers seemed to be generated by the volume changes due to the contraction of polymer chains during isothermal crystallization.     

The domain structure and mobility of semi-crystalline poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate): A solid-state NMR study

Solid-state NMR techniques have been employed to investigate the domain structure and mobility of the bacterial biopolymeric metabolites such as poly(3-hydroxybutyrate) (PHB) and its copolymers poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) containing 2.7 mol% (PHBV2.7) and 6.5 mol% (PHBV6.5) 3-hydroxyvalerate. Both single-pulse excitation with magic-angle spinning (SPEMAS) and cross-polarization magic-angle spinning (CPMAS) ¹³C NMR results showed that these biopolymers were composed of amorphous and crystalline regions having distinct molecular dynamics. Under magic-angle spinning, ¹H T_1ρ and ¹³C T₁ showed two processes for each carbon. Proton relaxation-induced spectral editing (PRISE) techniques allowed the neat separation of the ¹³C resonances in the crystalline regions from those in the amorphous ones. The proton spin-lattice relaxation time in the tilted rotating frame, , measured using the Lee-Goldburg sequence with frequency modulation (LGFM) as the spin-locking scheme, was also double exponential and significantly longer than ¹H T_1ρ. The difference between for the amorphous and crystalline domains was greater than that of ¹H T_1ρ. Our results showed that the differences could be exploited in LGFM-CPMAS experiments to separate the signals from two distinct regions. ¹H spin-diffusion results showed that the domain size of the mobile components in PHB, PHBV2.7 and PHBV6.5 were about 13, 24 and 36 nm whereas the ordered domain sizes were smaller than 76, 65 and 55 nm, respectively. The results indicated that the introduction of 3-hydroxyvalerate into PHB led to marked molecular mobility enhancement in the biopolymers.     

Structure investigation of narrow banded spherulites in polyhydroxyalkanoates by microbeam X-ray diffraction with synchrotron radiation

Narrow banded structures of spherulites of poly[(R)-3-hydroxybutyrate] (P(3HB)) and its copolymers, with different second monomer unit of 4-hydroxybutyrate, 3-hydroxyhexanoate or 6-hydroxyhexanoate, were investigated by microbeam X-ray diffraction with Fresnel Zone Plate technique in synchrotron radiation (SPring-8). Radial scanning of spherulites were performed in 2 or 4 μm steps with 0.5 μm beam diameter of fine microfocus beam. The X-ray diffraction patterns for P(3HB) homopolymer spherulites showed the change of crystal orientation along the radial direction (a-axis), while the b- and c-axes rotated around a-axis. The intensities in microbeam X-ray diagrams of spherulites for P(3HB) copolymers changed periodically as function of the distance along the radial direction. The periodicity measured by X-ray diffraction was matched with narrow band spacing (15-25 μm) observed by polarized optical microscopy.     

(R,R)-salen/salan-based polymer fluorescence sensors for Zn detection

(R,R)-salen-based polymer fluorescence sensor P-1 could be synthesized by the polymerization of 5,5′-(isoquinoline-5,8-diylbis(ethyne-2,1-diyl))-bis(3-tert-butyl-2-hydroxybenzaldehyde) (M-1) with (R,R)-1,2-diaminocyclohexane (M-2) via nucleophilic addition-elimination reaction, and (R,R)-salan-based polymer sensor P-2 could be obtained by the reduction reaction of P-1 with NaBH₄. The fluorescence response behaviors of two chiral polymers P-1 and P-2 on Zn²⁺ were investigated by fluorescence spectra. The fluorescence intensities of P-1 and P-2 can exhibit gradual enhancement upon addition of Zn²⁺. Compared with other cations, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, Cr³⁺ and Pb²⁺, Zn²⁺ can lead to the pronounced fluorescence enhancement as high as 22.8-fold for P-1 and 3.75-fold for P-2, respectively. The results show that P-1 and P-2 incorporating (R,R)-salen/salan moieties as receptors in the polymer main chain backbone can exhibit high sensitivity and selectivity for Zn²⁺ detection.     

Characterization of electrospun poly(N-isopropyl acrylamide) fibers

Poly(N-isopropyl acrylamide) (pNIPAM) is an interesting material in that it shows a thermoresponsive behavior around 32 °C in aqueous solutions. This behavior mimics that of many proteins in solution and as a result, many researchers have studied pNIPAM as a model for protein behavior. Yet, little is known about the processability of pNIPAM into three-dimensional matrices and whether such processing affects polymer conformation. In this work, 3D fibrous mats of pNIPAM were prepared by electrospinning from three different solvents and the resulting morphologies evaluated. Additionally, electrospun pNIPAM was evaluated with polarized Raman and infrared spectroscopies and compared against the spectra of the bulk material. It was found that the electrospinning process did not alter the polymer structure or morphology.     

Polybinaphthyls incorporating chiral (R) or (S)-2,2′-binaphthyland oxadiazole moieties by Stille reaction

Chiral polymers P-1 and P-2 were prepared by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-1) with 2,5-bis[(4-tributylstannyl)phenyl]-1,3,4-oxadiazole (M-2) via Pd(PPh₃)₄ catalyzed Stille coupling reaction. 1,3,4-Oxadiazole unit not only has high electron affinity, high thermal and oxidative stability, but also serves as a good chromophore. Polymers have strong blue fluorescence due to the efficient energy migration from the extended π-electronic structure of the polymers to the chiral binaphthyl core and can be expected to have potential application in the materials of fluorescent sensors. Circular dichroism (CD) spectra of polymers P-1 and P-2 are almost identical except that they gave opposite signals at each wavelength. The long wavelengths CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and a high rigidity of the polymer backbone.     

Segregation morphology of poly(3-hydroxybutyrate)/poly(vinyl acetate) and poly(3-hydroxybutyrate-co-10% 3-hydroxyvalerate)/poly(vinyl acetate) blends as studied via small angle X-ray scattering

Segregation morphology of poly(3-hydroxybutyrate) (PHB)/poly(vinyl acetate) (PVAc) and poly(3-hydroxybutyrate-co-10% 3-hydroxyvalerate) (P(HB-co-10% HV)/PVAc blends crystallized at 70 °C have been investigated by means of small angle X-ray scattering (SAXS). Morphological parameters including the crystal thickness (l_c) and the amorphous layer thickness (l_a) were deduced from the one-dimensional correlation function (γ(z)). Blending with PVAc thickened the PHB crystals but not the P(HB-co-10% HV) crystals. On the basis of the composition variation of l_a, and the volume fraction of lamellar stacks (?_s) revealed that PHB/PVAc blends created the interlamellar segregation morphology when the weight fraction of PVAc (w_PVAc)≤0.2 and the interlamellar and interfibrillar segregation coexisted when w_PVAc>0.2, while P(HB-co-10% HV)/PVAc blends yielded the interfibrillar segregation morphology at all blend compositions. For both PHB/PVAc and P(HB-co-10% HV)/PVAc blends, the distance of PVAc segregation was promoted by increasing PVAc composition and the distance of PVAc segregation in P(HB-co-10% HV)/PVAc blends was greater than in PHB/PVAc at a given PVAc composition. The crystal growth rate played a key role in controlling the segregation of PVAc.     

4-间甲苯胺-3-吡啶磺酰胺的合成工艺改进

以4-羟基吡啶-3-磺酸为原料,经氯化、氨解、缩合等3个步骤制备了4-间甲苯胺-3-吡啶磺酰胺,对氯化后处理、缩合反应及其精制进行了改进,总收率75%.     

Unique orientation textures formed in miscible blends of poly(vinylidene fluoride) and poly[(R)-3-hydroxybutyrate]

The oriented crystallization of poly[(R)-3-hydroxybutyrate] (PHB) in the miscible blends with poly(vinylidene fluoride) (PVDF) was investigated with various compositions. The PVDF/PHB blend films were prepared by solution casting and subsequent melt-quenching in ice water. Oriented films of the blends were prepared by uniaxially stretching the melt-quenched film at 0 °C in ice water using a hand-operated stretching apparatus. The oriented blend films were heat-treated at a fixed length in order to crystallize PHB in the oriented state. The crystal orientation and the lamellar textures of the obtained samples were studied with wide-angle X-ray diffraction (WAXD), and small-angle X-ray scattering (SAXS), respectively. The SAXS measurements showed that a considerable amount of molecular chains of PHB are excluded from the lamellar stacks of PVDF and exist in the interfibrillar regions in the oriented films of the blends. The cold crystallization of PHB in the interfibrillar region results in the orientation of PHB crystals, and the type of crystal orientation depends upon the composition of the blends. For the PVDF/PHB=4/6-7/3 blends, the crystal a-axis of PHB is highly oriented parallel to the drawing direction and the crystal c-axis (molecular chain axis) in PHB crystals is perpendicular to the drawing direction, i.e. orthogonal to the chain axis of the crystals of PVDF. It is considered that the a-axis orientation is induced by the confinement of crystal growth in the interfibrillar nano-domains. For the PVDF/PHB=2/8-3/7 blends, however, the crystal c-axis of PHB is primarily oriented in the drawing direction, suggesting that the stressed molecular chains of PHB are crystallized with the molecular orientation retained.     

Higher order structures and mechanical properties of bacterial homo poly(3-hydroxybutyrate) fibers prepared by cold-drawing and annealing processes

Pure bacterial homo poly(3-hydroxybutyrate) (PHB) fibers were prepared by melt spinning, followed by cold-drawing in an amorphous state at a temperature just above its glass transition temperature. Cold drawn fibers obtained were further drawn at higher temperatures, followed by annealing at various temperatures under tension. Relations among the processing conditions, higher order structures and mechanical properties were investigated using wide- and small-angle X-ray diffractions (WAXD and SAXD, respectively), birefringence, differential scanning calorimetry (DSC), and tensile measurements. PHB has two different crystalline forms, 2₁ helix conformation (α-form) and planar zigzag conformation (β-form). A single broad reflection of β-form was detected even in a PHB fiber drawn once at a temperature just above its T_g immediately after quenching and it tended to be stronger after 2nd drawing at higher temperatures. Annealing under low temperature and high tension facilitates the occurrence of β-form. It is suggested that the β-form crystal is formed not only from the tie chains between α-form lamella, but also from completely free amorphous chains. Changes in the amount of two types of crystals were analyzed using the WAXD integrated intensity. Birefringence of these fibers shows negative and positive values, depending on process conditions. Changes in higher order structure on the mechanical properties are also discussed.     

The chemomechanical properties of microbial polyhydroxyalkanoates

Microbially produced polyhydroxyalkanoates (PHAs) are fully biodegradable biopolyesters that have attracted much attention recently as alternative polymeric materials that can be produced from biorenewable and biowaste resources. The properties of these biological polymers are affected by the same fundamental principles as those of fossil-fuel derived polyolefins, with a broad range of compositions available based on the incorporation of different monomers into the PHA polymer structure, and with this broad range tailoring subsequent properties. This review comprehensively covers current understanding with respect to PHA biosynthesis and crystallinity, and the effect of composition, microstructure and supramacromolecular structures on chemomechanical properties. While polymer composition and microstructure are shown to affect these properties, the review also finds that a key driver for determining polymer performance properties is compositional distribution. From this review it follows that PHA–PHA blend compositions are industrially important, and the performance properties of such blends are discussed. A particular need is identified for further research into the effect of chemical compositional distribution on macromolecular structure and end-use properties, advanced modeling of the PHA accumulation process and chain growth kinetics for better process control.     

Pure gas and vapor permeation properties of poly[1-phenyl-2-[p-(trimethylsilyl)phenyl]acetylene] (PTMSDPA) and its desilylated analog, poly[diphenylacetylene] (PDPA)

The permeabilities of He, H₂, N₂, O₂, CO₂, CH₄, C₂H₆, C₃H₈, and n-C₄H₁₀ in poly[1-phenyl-2-[p-(trimethylsilyl)phenyl]acetylene] (PTMSDPA) and poly[diphenylacetylene] (PDPA) are presented and compared to those of poly(1-trimethylsilyl-1-propyne) (PTMSP), poly(1-phenyl-1-propyne) (PPP), and polysulfone. Like PTMSP, PTMSDPA, a disubstituted glassy acetylene-based polymer, exhibits higher permeabilities to organic vapors than to permanent gases due to its rigid polyacetylene backbone and bulky side groups, which provide a relatively high fractional free volume (FFV) value of 0.26. Desilylation was performed on PTMSDPA. The resulting material, PDPA, is totally insoluble in common organic solvents, so it has much higher chemical resistance than PTMSDPA. Additionally, due to its insolubility in polymerization solvents, desilylation provides the only known route to high molar mass PDPA. The FFV of the resulting membrane (PDPA) is reduced by approximately 12% relative to that of PTMSDPA. This leads to a decrease in gas permeability values and selectivity of organic vapors relative to nitrogen. For example, the oxygen permeability is reduced from 1200 to 500 Barrers upon desilylation. The pure gas selectivities decrease from 9 to 3 for n-C₄H₁₀/N₂ and from 26 to 9 for C₃H₈/N₂.     

Blends of bacterial poly(3-hydroxybutyrate) and a poly(epichlorohydrin-co-ethylene oxide) copolymer: thermal and CO2 transport properties

In this work the miscibility and the carbon dioxide transport properties of a bacterial, isotactic poly(3-hydroxybutyrate) (iPHB) and its blends with a copolymer of epichlorohydrin and ethylene oxide (ECH-co-EO) have been studied. Blends were prepared by solution/precipitation. The aim to obtain miscible blends of iPHB with a rubbery second component (such as the ECH-co-EO copolymer) is to have mixtures with glass transition temperatures below room temperature. In these conditions, the iPHB chains not involved in the crystalline regions retain its mobility. This mobility seems to be necessary for the attack of microorganisms and the corresponding biodegradability.Miscibility is the general rule of these mixtures, as shown by the existence of a single glass transition temperature for each blend and by the depression of the iPHB melting point. The interaction energy density stabilising the mixtures, calculated using the Nishi-Wang treatment, was similar to those of other polymer mixtures involving different polyesters and poly(epichlorohydrin) (PECH) and ECH-co-EO copolymers. The so-called binary interaction model has been used in order to simulate the evolution of the interaction energy density with the ECH-co-EO copolymer composition. Previously reported experimental data on blends of iPHB with PECH and poly(ethylene oxide) (PEO) have been used to quantify the required segmental interaction energy densities.In the determination of the CO₂ transport properties of the mixtures, only iPHB rich blends containing up to 40% of copolymer were considered. The effect of the ECH-co-EO copolymer is to increase the sorption and the diffusion of the penetrant (and, consequently, the permeability) with respect to the values of the pure iPHB. This is primarily due to the reduction of the global crystallinity of the blends and to the low barrier character of the ECH-co-EO copolymer. Sorption data can be reasonably reproduced using an extension of the Henry's law to ternary systems.     

3-甲基-4-丁酰胺基-5-硝基苯甲酸甲酯的合成

以3-甲基-4-硝基苯甲酸为原料,经酯化、催化加氢、缩合、硝化和精制,合成了两个医药中间体:3-甲基-4-正丁酰胺基苯甲酸甲酯和3-甲基-4-正丁酰胺基-5-硝基苯甲酸甲酯,并通过1H NMR和IR验证了其结构。     

9-[(4-氟)-3-羟基甲基丁基]鸟嘌呤(FHBG)的改进合成方法

报道了9-[(4氟-)-3羟-基甲基丁基]鸟嘌呤(FHBG,Ⅱ)的改进合成方法,对起始原料喷昔洛韦(Ⅲ)的氨基和一个羟基用4-甲氧基氯化三苯甲烷保护,对另一个羟基磺酯化,得到N2-(p-甲氧基苯酰基二苯基甲基)-9-[(4甲-苯磺酰)-3-p-甲氧基苯酰基二苯基-甲氧基甲基丁基]鸟嘌呤(Ⅴ),收率为70.5%;再用四丁基氟化铵(TBAF)对化合物Ⅴ亲核取代4-甲苯磺酰基团,水解脱去保护基,即得FHBG。产品经1HNMR、IR、MS表征,并用HPLC分析了Ⅴ和Ⅱ,保留时间分别为5.89 m in和4.41 m in,积分计算质量分数分别为w(Ⅴ)=99.5%和w(Ⅱ)=99.3%。     

Different thermal behaviors of microbial polyesters poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)

Various methods were employed to study the thermal behaviors of a novel microbial polyhydroxyalkanoate (PHA) terpolyester, namely, poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) (PHBVHHx) compared with poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx). PHBVHHx showed higher crystallization rate and degree of crystallinity. PHBVHHx exhibited also different multiple melting behaviors from PHBHHx. The WAXD results demonstrated that the crystal lattice of PHBVHHx was more compact than that of PHBHHx, suggesting stronger interaction between chain stems. DSC and in-situ heating WAXD studies revealed that PHBVHHx showed a partial melting-lamellar thickening-remelting process during heating, while PHBHHx demonstrated a melting-rapid formation of new crystals-remelting process. It is proposed that the simultaneous introduction of 3-hydroxyvalerate and 3-hydroxyhexanoate monomers into poly(3-hydroxybutyrate) improves the mobility of chain stems along the chain direction, leading to easier intralamellar slip during heating or drawing, further resulting in improvement of mechanical properties, which was supported by the DMA tests. Consequently, we establish a relationship between the thermal behavior and the mechanical properties of biodegradable plastics, which we believe is applicable to other polymers as well.