聚丁二酸丁二醇酯环状二聚物的纯化、表征及其开环聚合的研究

从聚丁二酸丁二醇酯(PBS)的环状低聚物中分离提纯出了PBS的环状二聚物〔cyclic dimer of poly(butylenesuccinate),CDBS〕,采用核磁、质谱对该环状二聚物进行了表征,研究表明,通过分离纯化得到了纯度高的PBS的环状二聚物。以纯化的CDBS为原料、十二醇为初始剂、辛酸锡作催化剂,采用开环聚合的方法合成了PBS,采用核磁、红外光谱对合成的PBS的结构进行了表征,并研究了开环聚合温度、聚合时间以及催化剂用量对PBS的分子量、单体转化率的影响,结果表明,开环反应温度220℃左右,反应3 h,PBS的相对分子质量(简称分子量,下同)可达到63 300,与直接酯化-缩聚法相比,采用开环聚合法能提高PBS的制备效率。     

Synthesis of poly(1,4-naphthylene) bearing crown ether side chain by asymmetric oxidative coupling polymerization

The oxidative coupling polymerization of racemic-, (R)-, and (S)-2,2′,3,3′-tetrahydroxy-1,1′-binaphthyl derivatives bearing a crown ether moiety was carried out in the presence of a Cu(I) or Cu(II) catalyst with various ligands, such as N,N,N′,N′-tetramethylethylenediamine, (S)-(+)-1-(2-pyrrolidinylmethyl)pyrrolidine, (−)-sparteine [(−)Sp], and (S)-(−)-2,2′-isopropylidenebis(4-phenyl-2-oxazoline). Methanol-insoluble poly(binaphthyl crown ether) with a molecular weight up to M_n=4.1×10³ was synthesized in moderate yields. Polymerization using (−)Sp proceeded in an S-selective manner; the polymer with the highest negative specific rotation was obtained with the (S)-monomer. The obtained polymers exhibited characteristic abilities for chiral recognition toward amino acids, such as 2-phenylglycine hydrochloride and 2-phenylglycine methyl ester hydrochloride.     

Development of a new azido-oxazoline monomer for the preparation of amphiphilic graft copolymers by combination of cationic ring-opening polymerization and click chemistry

A new monomer (2-(5-azidopentyl)-2-oxazoline) bearing an azido group was synthesized. The cationic ring-opening copolymerization of this monomer with 2-methyl-2-oxazoline resulted in a well-defined linear polymer backbone with pendant azido groups. Alkynyl-poly(d,l-lactide) was grafted onto the azido groups of poly(oxazoline) via a Huisgen 1,3-dipolar cycloaddition reaction to give a novel amphiphilic graft copolymer [poly(2-methyl-2-oxazoline-co-2-pentyl-2-oxazoline)-g-poly(d,l-lactide)] (P[(MeOx-co-PentOx)-g-LA]). Different graft copolymers were prepared with PLA of different lengths. Preliminary results of the self-association of this copolymer in water indicated the formation of nanoparticles, which suggests this copolymer may have applications as vehicles for drug delivery.     

Synthesis of poly(ethylene terephthalate-co-isophthalate) via ring-opening polymerization of their cyclic oligomers

Syntheses of poly(ethylene terephthalate-co-isophthalate) (PET-co-PEI) were achieved via ring-opening copolymerization of corresponding cyclic oligoesters. The ring-opening polymerization (ROP)-PET-co-PEI were prepared by equilibrating an equimolar amount of cyclic oligo(ethylene terephthalate) and cyclic oligo(ethylene isophthalate) using di-n-butyltin oxide catalyst under high concentration conditions at 270 and 290 °C for 8 and 12 h. The copolyesters were obtained in yields of up to 91% with the inherent viscosity (η _inh) of up to 2.89 dl/g indicating the drastically high molecular weight compared with the conventional and ROP routes for the synthesis of PEI. The differential scanning calorimetry data of ROP-PET-co-PEI showed the melting temperatures above 400 °C indicated the potential used in high temperature application.     

Synthesis and characterization of a novel phthalazinone poly(aryl ether sulfone ketone) with carboxyl group

Soluble, thermally stable phthalazinone poly(aryl ether sulfone ketone)s (PPESKs) containing a carboxyl group in its side chain have been synthesized by the nucleophilic displacement reaction of 4‐(4‐hydroxylphenyl)‐1(2H)‐phthalazinone with bis(4‐chlorophenyl) sulfone, 4,4′‐difluoro‐benzophenone, and phenolphthalin. The polymerization reactions were conducted in sulfolane in the presence of K₂CO₃ to give high molecular weight polymers, which are soluble in solvent such as nitrobenzene and pyridine at room temperature and easily cast into flexible, yellow, and transparent film. The polymers are amorphous with high glass transition temperature. The decomposition temperature of the polymers are >400°C, which indicates high thermal stability. The crosslinking reaction of PPESK can occur by using dicyandiamide (Dicy) as curing agent. The apparent energy (ΔE) is 52.2 kJ/mol and reaction order (n) is close to 1.0. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1111–1114, 2003     

Synthesis and polymerization of a novel oxirane bearing a cyclic acetal of salicylaldehyde chain moiety

The novel compound 2(1,3-dioxolan-2-yl)phenoxymethyloxirane was synthesized and anionically polymerized with potassium hydroxide, potassium hydride and potassium tert-butoxide. Polymers were characterized by ¹H and ¹³C NMR spectroscopy, size exclusion chromatography and electrospray mass spectrometry. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of novel (sulfonated) poly(arylene ether)s with pendent trifluoromethyl groups

This paper reports the synthesis of four different trifluoromethyl-substituted poly(arylene ether)s on the basis of 2,2-bis(4-hydroxyphenyl)hexafluoropropane (bisphenol AF) and various difluoro- or dinitrobiphenyl or terphenyl monomers in the course of a step-growth polycondensation. Besides a comparison between the polymerisability of the different monomer combinations, a main focus of this work lies on the NMR characterization of these poly(arylene ether)s. Poly(arylene ether)s with sufficiently high number average molecular weights were sulfonated by fuming sulfuric acid or chlorosulfonic acid and investigated in terms of membrane properties relevant for fuel cell applications.     

Synthesis, characterization, and crosslinking of soluble cyano-containing poly(arylene ether)s bearing phthalazinone moiety

A novel series of phthalazinone-based poly(arylene ether nitrile)s bearing terminal cyano groups via N-C linkages (PPEN-DCs) were synthesized by a simple solution polycondensation of 4-(4-hydroxylphenyl)(2H)-phthalazin-1-one (HPPZ) with calculated 2,6-difluorobenzonitrile (DFBN), followed by the termination of 4-chlorobenzonitrile (CBN). The M_ns of oligomeric PPEN-DCs, which are in the range of 1600-6200, can be well-controlled by adjusting reactant ratio. The incorporation of phthalazinone into the polymer chain results in an improvement in the solubility and glass transition temperatures (T_gs). The amorphous PPEN-DCs were thermally crosslinked to afford insoluble products in the presence of terephthalonitrile and zinc chloride. The pendant cyano groups in the polymer chain hardly undergo any crosslinking or cyclization, while the terminal cyano groups with nitrogen-bridged phthalazinone in the para-substitution are much more reactive in s-triazine forming reaction and effectively promote certain crosslinking under normal pressure. T_gs of the oligomers, which range from 245 to 269 °C, could be further increased at least by 94 °C upon thermal curing. The crosslinked samples exhibit excellent thermal stability and absorb less than 2.7 wt% water after exposure to an aqueous environment for extended periods. This kind of cyano-terminated poly(arylene ether nitrile)s may be a good candidate as matrix resins for high-performance polymeric materials.     

Synthesis,structural characterization and properties of novel functional poly(ether imide)/titania nanocomposite thin films

In this study, the synthesis, morphology, and thermal properties of new poly(ether imide)/titania nanohybrid films were investigated. The novel diamine containing functional nitrile groups was prepared in two steps by the nucleophilic substitution reaction and it was fully characterized by different techniques. Reaction of this diamine with pyromellitic dianhydride and 4-aminobenzoic acid gave poly(ether imide) with carboxylic acid end groups. This acid functionalized poly(ether imide) was condense with different amount of TiO₂ nanoparticles to provide organic-inorganic bonding, and the flexible films of these hybrid were prepared. The obtained materials were characterized by Fourier transform-infrared spectroscopy, thermogravimetry analysis (TGA), differential scanning calorimetry, X-ray powder diffraction, UV–Vis spectroscopy, field emission-scanning electron microscopy, and transmission electron microscopy (TEM) techniques. TEM of the nanohybrid films with 12% of TiO₂ contents confirms well dispersion of nanoparticles in the polymer matrix. TGA data indicated that the thermal behavior of the hybrid materials was increased with an increasing the content of TiO₂ nanoparticles. The tensile stress–strain of the hybrids was investigated and the resulting nanocomposites showed good mechanical properties. The permeability and selectivity of the PEI/TiO₂ membranes as a function of the titania weight percentage were study and the results indicated that the permeabilities of CO₂ and N₂ increase with increasing the titania content.     

Synthesis and characterization of optically active 2,4-disubstituted-2-oxazolines and their polymerization

Four different optically active 2,4-disubstituted-2-oxazolines were synthesized and characterized. Cationic polymerization of these oxazolines were studied. Three of the oxazolines could be polymerized using methyl trifluoromethanesulfonate as initiator. S-(–)-2-Phenyl-4-isopropyl-2-oxazoline could not be polymerized under the conditions used.     

Synthesis and characterization of novel poly(aryl ether ketone)s with metallophthalocyanine pendant unit from a new bisphenol containing dicyanophenyl side group

A new bisphenol, (3,4-dicyano)phenylhydroquinone was prepared via a three-step reaction. Then a series of novel poly(aryl ether ketone) copolymers containing dicyanophenyl groups were prepared by the reactions of 4,4′-difluorobenzophenone with (3,4-dicyano)phenylhydroquinone and 4,4′-isopropylidenediphenol. After that, a series of poly(aryl ether ketone)s with metallophthalocyanine pendants were synthesized via the reactions of poly(aryl ether ketone)s containing dicyanophenyl with excessive amounts of 1,2-dicyanobenzene and the corresponding metal salt in quinoline. These resulting copolymers were found to have high glass transition temperatures and high thermal stability. They have good solubility and are capable of forming tough films. These copolymers show strong optical absorption in the visible region and exhibit strong blue photoluminescence.     

Crosslinkable poly(aryl ether ketone)s containing pendant phenylethynyl moieties: Synthesis, characterization and properties

A novel phenylethynyl-contained bisphenol monomer, (2,5-dihydroxyphenyl)(4-(2-phenylethynyl)phenyl)methanone (PEBP), has been synthesized and characterized. The resultant monomer was copolymerized with hydroquinone and 4,4′-difluorobenzophenone by means of an aromatic nucleophilic substitution reaction to provide a series of crosslinkable poly(aryl ether ketone)s containing pendant phenylethynyl moieties (PE-PAEKs). The solubility of PE-PAEKs tended to be improved with the increase in PEBP content. Wide-angle X-ray diffraction (WAXD) results showed that introduction of bulky pendant groups into molecular chains led to decrease in crystallinity. PE-PAEKs were successfully cured upon heating. Dynamic mechanical analysis (DMA) results indicated that the glass-transition temperature (T_g) of the cured PE-PAEKs was increased. Thermogravimetric analysis (TGA) results implied that the thermal stability of the cured PE-PAEKs was excellent.     

含稠杂环结构聚醚酮酮的合成与性能研究(I)

以吩噻（ＯＳＰ）、对苯二甲酰氯（ＴＰＣ）和二苯醚（ＤＰＥ）为单体,在无水ＡｌＣｌ３／ＣＨ２ＣｌＣＨ２Ｃｌ／ＤＭＦ催化剂／溶剂体系中,由亲电缩聚反应合成了含稠杂环结构的聚醚酮酮共聚物,并对其基本性能进行了测定。结果表明,含ＯＳＰ结构单元ＰＥＫＫ的Ｔｇ比全对苯基位ＰＥＫＫ高４２℃以上。且随ＯＳＰ结构单元含量的增加,共聚物Ｔｇ逐渐提高,而Ｔｍ、结晶度却逐渐下降,仍具有很好的耐热性和耐溶剂性。     

Synthesis and radical polymerization of end-allenoxy polyoxyethylene macromonomer

Poly(ethylene glycol) allenyl methyl ether (2) was prepared by the reaction of poly(ethylene glycol) monomethyl ether (the number average molecular weight (M_{n) = 550}) with propargyl bromide, followed by the base-catalyzed isomerization reaction. Functionality of end-allenyl groups in the obtained macromonomer was determined as 92% (from ¹H-NMR). The radical polymerization of 2 was carried out in bulk and in benzene at 60 or 120°C to yield a polymer with poly(ethylene glycol) side chains. For instance, a polymer (3, M_n = 3900) was obtained in 39% yield by the polymerization of 2 in bulk at 60°C for 48 h using 6 mol% of α,α′-azobisisobutyronitrile (AIBN). The obtained polymer was soluble in organic solvents as well as water.     

Synthesis of cyclic carbonate from allyl glycidyl ether and CO2 over silica-supported ionic liquid catalysts prepared by sol-gel method

A silica-supported ionic liquid (Im-IL) was proven to be an effective heterogeneous catalyst for solventless synthesis of cyclic carbonate from allyl glycidyl ether (AGE) and carbon dioxide. Im-IL catalysts were prepared by sol-gel method. The synthesis of cyclic carbonate from AGE and CO₂ was carried out in a batch autoclave reactor. Im-IL with shorter alkyl chain length showed the highest conversion of AGE, probably due to the steric hindrance for the formation of intermediate from the catalyst prepared by using longer alkyl chains and AGE. High temperature and high pressure were favorable for the conversion of AGE. Im-IL can be reused for the reaction up to two consecutive runs without any considerable loss of its catalytic activity.     

Synthesis and characterization of polyimides based on isopropylidene-containing bis(ether anhydride)s

Two bis(ether anhydride)s, 4,4′-[1,4-phenylenebis(isopropylidene-1,4-phenyleneoxy)]-diphthalic anhydride (IV _a) and 4,4′-[isopropylidenebis(1,4-phenylene)dioxy]diphthalic anhydride (IV _b), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of 4-nitrophthalonitrile with α,α ′-bis(4-hydroxyphenyl)-1,4-diisopropylbenzene (I _a) and 4,4′-isopropylidenediphenol (I _b) in N,N-dimethylformamide (DMF) in the presence of potassium carbonate. The bis(ether anhydride)s IV _a and IV _b were polymerized with various aromatic diamines to obtain two series of poly(ether amic acid)s VI _a–g and VII _a–g with inherent viscosities in the range of 0.30∼0.74 and 0.29∼1.01 dL/g, respectively. The poly(ether amic acid)s were converted to poly(ether imide)s VIII _a–g and IX _a–g by thermal cyclodehydration. Most of the poly(ether imide)s could afford flexible and tough films, and they showed high solubility in polar solvents such as N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide, and m-cresol. The obtained poly(ether imide) films had tensile strengths of 45∼83 MPa, elongations-to-break of 6∼27%, and initial modulus of 0.6∼1.7 GPa. The T_gs of poly(ether imide)s VIII _a–g and IX _a–g were in the range of 194∼210 and 204∼243 °C, respectively. Thermogravimetric analysis (TG) showed that 10% weight loss temperatures of all the polymers were above 500 °C in both air and nitrogen atomspheres.     

Synthesis and characterization of poly(arylene ether ketone) (co)polymers containing sulfonate groups

Poly(arylene ether ketone)s containing sulfonate groups were synthesized by aromatic nucleophilic polycondensation of 4,4′-difluorobenzophenone (DFK), sodium 2,5-dihydroxybenzensulfonate (SHQ) and bisphenols. Only low-molecular weight oligomer was obtained when hydroquinone (HQ) was employed as comonomer, while copolymerization of DFK, SHQ, and phenolphthalein (PL) proceeded quantitatively to high-molecular weight (reduced viscosities above 0.68 dL/g) in dimethylsulfoxide at 175 °C in presence of anhydrous potassium carbonate. The sulfonated polymers were soluble in dipolar aprotic solvents, such as N,N-dimethylactamide and N-methyl-2-pyrrolidinone. Tough membranes cast from N,N-dimethylformamide solution with SHQ/DFK mole ratios ≤65:35 were obtained. Both glass transition temperatures and hydrophilicity of the copolymers increased with the content of sodium sulfonate groups. The materials are candidates as new polymeric electrolytes for proton exchange membranes.     

复合成盐剂对聚醚醚酮合成与性能的影响

采用4,4′-二氟二苯甲酮、对苯二酚为原料,以不同比例的碳酸钾和碳酸钠为复合成盐剂,二甲苯为脱水剂,二苯砜为溶剂成功制备了一系列聚醚醚酮(PEEK)树脂。通过傅里叶红外光谱和X射线衍射对PEEK树脂结构进行了表征,证明合成的样品是对苯二酚型PEEK树脂。其次,对所制样品分别进行力学性能、特性黏度、热性能测试,详细地探讨不同钾/钠比例的复合成盐剂对PEEK性能的影响。结果表明,所有样品均展示了优异的力学性能和热性能,其熔点和初始分解温度分别大于330℃和520℃,拉伸强度介于77~101 MPa。此外,当碳酸钾和碳酸钠的物质的量比为7∶3时,PEEK树脂的综合性能达到最优。     

Synthesis, kinetic observations and characteristics of polyarylene ether sulphones prepared via a potassium carbonate DMAC process

The classical route for the synthesis of this family of macromolecules is via nucleophilic aromatic substitution of 4,4′-dichlorodiphenyl sulphone with bisphenates using dimethylsulphoxide (DMSO) and aqueous sodium hydroxide. High molecular weight homopolymers can be synthesized in a relatively short time. However, hydrolytic side reactions can limit its scope for the synthesis of both homopolymers derived from insoluble bisphenates and for copolymers. An alternate route is discussed herein that uses potassium carbonate/dimethylacetamide as base and aprotic dipolar solvent, respectively, for the synthesis of several homopolymers and copolymers derived from various bisphenols. In this system, excess potassium carbonate, unlike aqueous caustic, does not prevent the synthesis of high molecular weight macromolecules. Investigations of the kinetics and mechanism of this process were conducted. These studies demonstrated that this route deviates from the relatively simple second order kinetics previously observed for the aqueous sodium hydroxide/DMSO system. This deviation has been rationalized as resulting from the partially heterogeneous nature of the potassium carbonate.     

含氰侧基联苯型聚芳醚醚酮酮的合成及表征

通过一种反应条件较为温和的反应新工艺,合成联苯二甲酰氯,即4,4’-二氯甲酰基联苯(BC IBP)。然后,在无水A lC l3及N-甲基吡咯烷酮(NMP)/1,2-二氯乙烷(DCE)复合溶剂的存在下,将2,6-二苯氧基苯甲腈(DPOBN)与BC IBP进行低温缩聚反应,合成了一类新型含氰侧基联苯型聚芳醚醚酮酮。用IR,DSC,TG,WAXD及元素分析等方法对其结构和性能进行了表征。结果表明,所合成的聚合物具有预期结构且为非晶态聚合物;其玻璃化转变温度(Tg)为211℃,在氮气气氛中及在空气气氛中的热分解5%的温度(Td)分别为523℃及498℃,说明其具有突出的耐高温性能;聚合物除了能在浓H2SO4,CF3COOH/CHC l3等强质子性溶剂当中溶解外,对其他的溶剂均不溶解,说明聚合物具有优异的耐化学腐蚀性能。