辛烯基琥珀酸淀粉酯的糊化性质研究

通过合成不同取代度的辛烯基琥珀酸淀粉酯,研究不同淀粉糊产品的透明度、黏度、冻融稳定性和乳化性能。结果表明,氯化钠和柠檬酸显著降低淀粉糊的黏度和透明度,蔗糖则使黏度和透明度稍有增加。该淀粉糊具有剪切变稀现象,属于假塑性流体,黏度随着该淀粉酯取代度的增加而增加,冻融稳定性较低,在淀粉酯的质量分数为1.2%时,乳化性能较好。     

白芸豆淀粉与小利马豆淀粉理化性质的比较研究

本实验以白芸豆和小利马豆为原料,采用碱法提取淀粉,对白芸豆淀粉和小利马豆淀粉的理化特性进行分析研究。结果表明,白芸豆和小利马豆的淀粉颗粒均呈表面光滑、无棱角及裂痕的特征,且2种淀粉的微晶结构均为A型;2种豆类淀粉的溶解度和膨胀度均随温度的升高而增加。小利马豆淀粉和白芸豆淀粉在冻融稳定性、透明度和成糊特性等方面存在显著差异,小利马豆淀粉的膨胀度、溶解度及淀粉糊的冻融稳定性和透明度更好,而白芸豆淀粉呈现起糊温度、峰值黏度、破损值和回生值较低的成糊特性,易成糊、抗剪切。     

根茎类作物淀粉糊的特性

研究糊浓度、温度、回转速度、pH和无机盐等因素对甘薯、木薯和蕉芋淀粉糊黏度的影响,测定甘薯、木薯和蕉芋淀粉糊的透明度、冻融性、凝沉性和抗霉菌能力等性质.结果表明:3种作物中,蕉芋淀粉糊的透明度较高、抗霉菌能力较强.木薯淀粉糊的冻融稳定性较好,甘薯淀粉湖的沉降稳定性较差.甘薯、木薯和蕉芋淀粉糊的黏度均随着浓度的增加而增加;随着糊温度的升高而降低;随着回转速度的增大而减小.在中性和碱性条件下,木薯淀粉糊的黏度较甘薯和蕉芋淀粉糊大.大部分无机盐的存在使淀粉糊的黏度下降,尤其是FeCl3使糊黏度大幅下降;硼砂却使3种淀粉糊的黏度均增加.     

羟丙基玉米淀粉的制备及特性研究

本文研究了用环氧丙烷制备羟丙基玉米淀粉的反应条件以及羟丙基化对玉米淀粉糊特性的影响,在反应条件中,着重研究了淀粉乳浓度、环氧丙烷用量、反应温度和时间对醚化程度以及反应效率的影响规律,试验表明：羟丙基化能大大提高玉米淀粉糊的抗剪切性能和抗盐性能,使淀粉糊的透明度和冻融稳定性都有所增加。     

马铃薯淀粉及其7种变性淀粉糊液特性的比较研究

通过对马铃薯淀粉(PS)及其7种变性淀粉(醋酸酯淀粉、羟丙基淀粉、磷酸酯双淀粉、乙酰化二淀粉磷酸酯、羟丙基二淀粉磷酸酯、氧化淀粉、氧化羟丙基淀粉)在糊化温度、峰值黏度、热稳定性、凝胶性、抗剪切、耐酸性、冻融稳定性和透明度等性能差异的研究,探讨了不同改性方式对马铃薯淀粉糊特性的影响。结果表明:⑴羟丙基和醋酸酯改性均可降低马铃薯淀粉的糊化温度,提高淀粉峰值黏度,增加糊液透明度和冻融稳定性,但淀粉糊的热稳定性和凝胶性差;⑵交联改性提高了马铃薯淀粉的糊化温度和凝胶性,增强了糊液热稳定性和耐酸性,但透明度降低;⑶氧化处理降低了马铃薯淀粉的糊化温度和峰值黏度,提高淀粉糊透明度;(4)双重改性处理的复合变性淀粉同时兼有二种单一变性淀粉的共同特性,其中:氧化羟丙基淀粉的透明度最好,羟丙基二淀粉磷酸酯的冻融稳定性最好。     

苦荞淀粉颗粒及淀粉糊性质研究

为明确苦荞籽粒淀粉理化特性,以7个苦荞品种为材料,分析了其淀粉颗粒表面结构及其淀粉糊的透明度、冻融稳定性、凝沉性、糊化特性、热焓特性。结果表明,苦荞淀粉颗粒多为不规则多面体球形,颗粒大小平均为6.8μm;苦荞淀粉糊的透明度平均为7.68%,低于玉米淀粉糊;苦荞淀粉糊凝沉性、冻融稳定性均强于玉米淀粉糊;苦荞淀粉的峰值黏度、谷值黏度、最终冷黏度、破损值及回生值均高于玉米淀粉;苦荞淀粉糊具有较强的热黏度稳定性、冷黏度稳定性和凝胶形成能力;苦荞淀粉糊的平均糊化温度范围为65.87℃到78.41℃,峰值温度为70.88℃,均低于玉米淀粉糊。     

交联和羟丙基改性对蜡质玉米淀粉糊性能的影响

本研究采用蜡质玉米淀粉为原料,湿法工艺制备了磷酸酯双淀粉(1412)、羟丙基淀粉(1440)和羟丙基二淀粉磷酸酯(1442),通过对蜡质玉米淀粉(WS)和3种变性淀粉(1412、1440、1442)在黏度、抗剪切、耐酸性、冻融稳定性和透明度等性能的比较,探讨了羟丙基醚化和交联改性处理对蜡质玉米淀粉糊性能的影响。试验结果显示:⑴羟丙基改性处理降低了淀粉的糊化温度,提高了淀粉峰值黏度,透明度和冻融稳定性得到显著改善,但热稳定性、耐酸性和抗剪切均较差;⑵磷酸盐交联改性的磷酸酯双淀粉糊化温度升高,峰值黏度降低,糊液在抗剪切、耐酸性方面得到显著改善,但糊液透明度降低,冻融稳定性未得到改善;⑶通过交联和羟丙基改性的羟丙基二淀粉磷酸酯,兼具有磷酸酯双淀粉和羟丙基淀粉的共同特性。     

木薯交联羧甲基淀粉的性质研究

采用搅拌球磨机对木薯淀粉进行机械活化,以活化60min的木薯淀粉为原料,环氧氯丙烷为交联剂,一氯乙酸钠为醚化剂制备交联羧甲基淀粉,对交联羧甲基淀粉的溶解度,糊的透明度、冻融稳定性、抗老化、抗酸、抗剪切等性质进行研究。结果表明,相对于交联淀粉,交联羧甲基淀粉的溶解度增大、糊的透明度增大;相对于羧甲基淀粉,交联羧甲基淀粉的溶解度减小,糊的透明度降低;相对于交联淀粉和羧甲基淀粉,交联羧甲基淀粉糊的冻融稳定性、抗老化、抗酸和抗剪切能力增强。     

食用醋酸酯甘薯淀粉性质的研究

以甘薯淀粉为原料,醋酸酐为酯化剂,以乙酰基含量和取代度为指标,制备出不同取代度系列醋酸酯甘薯淀粉。研究了不同乙酰基含量醋酸酯甘薯淀粉的性质,包括颗粒形态、膨胀度、溶解度、淀粉糊黏度、透明度、凝沉性和冻融稳定性等,为其在食品中的应用提供依据。实验结果表明,随着醋酸酯淀粉取代度的增加,淀粉糊的峰值黏度不断提高,起糊温度不断降低。乙酰化作用提高了淀粉的膨胀度和溶解度以及淀粉糊的透明度和冻融稳定性;降低了淀粉糊的凝沉性。     

肇实淀粉糊特性的研究

对肇实淀粉糊的透明度、冻融稳定性、凝沉性、流变性、抗剪切稳定性、触变性以及不同条件如温度、pH值、NaCl和蔗糖等对肇实淀粉糊的影响进行了研究,以期为肇实淀粉的加工、应用提供一定的理论基础。     

Reliable identification of grapevine rootstock varieties using RAPD PCR on woody samples

Since grapevine ( Vitis spp .) rootstock material is being traded increasingly as disbudded woody material a lack of distinctive morphological features on such material necessitates an alternative and reliable means of identification. Methods described here were developed for rapid and efficient extraction of DNA from woody samples rich in phenolic compounds and polysaccharides, and for subsequent identification of varieties by RAPD PCR. Using these methods, and with the application of only one selected RAPD primer, we were able to differentiate sixteen rootstock varieties, including the seven varieties most commonly used in Germany. Problems commonly encountered with reproducibility of RAPD patterns were avoided by choosing primers with a dinucleotide sequence and a high G/C content that allowed a rather high annealing temperature of 45°C. Methods described here should also be useful for other horticultural crops, especially those with woody tissues rich in phenolic compounds and polysaccharides.     

An internet compendium of analytical methods and spectroscopic information for monomers and additives used in food packaging plastics

An internet website (http://cpf.jrc.it/smt/) has been produced as a means of dissemination of methods of analysis and supporting spectroscopic information on monomers and additives used for food contact materials (principally packaging). The site which is aimed primarily at assisting food control laboratories in the European Union contains analytical information on monomers, starting substances and additives used in the manufacture of plastics materials. A searchable index is provided giving PM and CAS numbers for each of 255 substances. For each substance a data sheet gives regulatory information, chemical structures, physico-chemical information and background information on the use of the substance in particular plastics, and the food packaging applications. For monomers and starting substances (155 compounds) the infra-red and mass spectra are provided, and for additives (100 compounds); additionally proton NMR are available for about 50% of the entries. Where analytical methods have been developed for determining these substances as residual amounts in plastics or as trace amounts in food simulants these methods are also on the website. All information is provided in portable document file (PDF) format which means that high quality copies can be readily printed, using freely available Adobe Acrobat Reader software. The website will in future be maintained and up-dated by the European Commission's Joint Research Centre (JRC) as new substances are authorized for use by the European Commission (DG-ENTR formerly DGIII). Where analytical laboratories (food control or other) require reference substances these can be obtained free-ofcharge from a reference collection housed at the JRC and maintained in conjunction with this website compendium.     

Aroma characterization of various apricot varieties using headspace–solid phase microextraction combined with gas chromatography–mass spectrometry and gas chromatography–olfactometry

The characterization of the aromatic profile of several apricot cultivars with molecular tracers in order to obtain objective data concerning the aromatic quality of this fruit was undertaken using headspace–solid phase microextraction (HS–SPME). Six apricot cultivars were selected according to their organoleptic characteristics: Iranien, Orangered, Goldrich, Hargrand, Rouge du Roussillon and A4025. The aromatic intensity of these varieties measured by HS–SPME–Olfactometry were defined and classified according to the presence and the intensity of grassy, fruity and apricot like notes. In the six varieties, 23 common volatile compounds were identified by HS–SPME–GC–MS. Finally, 10 compounds, ethyl acetate, hexyl acetate, limonene, β-cyclocitral, γ-decalactone, 6-methyl-5-hepten-2-one, linalool, β-ionone, menthone and (E)-hexen-2-al were recognized by HS–SPME–GC–O as responsible of the aromatic notes involved in apricot aroma and considered as molecular tracers of apricot aromatic quality which could be utilized to discriminate apricot varieties.     

Tests of potential functional barriers for laminated multilayer food packages. Part I: Low molecular weight permeants

The advent of the functional barrier concept in food packaging has brought with it a requirement for fast tests of permeation through potential barrier materials. In such tests it would be convenient for both foodstuffs and materials below the functional barrier (sub-barrier materials) to be represented by standard simulants. By means of inverse gas chromatography, liquid paraffin spiked with appropriate permeants was considered as a potential simulant of sub-barrier materials based on polypropylene (PP) or similar polyolefins. Experiments were performed to characterize the kinetics of the permeation of low molecular weight model permeants (octene, toluene and isopropanol) from liquid paraffin, through a surrogate potential functional barrier (25 μm-thick oriented PP) into the food simulants olive oil and 3% (w/v) acetic acid. These permeation results were interpreted in terms of three permeation kinetic models regarding the solubility of a particular model permeant in the post-barrier medium (i.e. the food simulant). The results obtained justify the development and evaluation of liquid sub-barrier simulants that would allow flexible yet rigorous testing of new laminated multilayer packaging materials.     

Analysis of benzo[a]pyrene in spiked fatty foods by second derivative synchronous spectrofluorimetry after microwave-assisted treatment of samples

A simple, rapid and inexpensive method has been developed for the determination of benzo[a     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. II: Certification study

This paper describes the second part of a project undertaken to develop certified mussel reference materials for paralytic shellfish poisoning toxins. In the first part two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin and decarbamoyl-saxitoxin in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the certification exercise. Fifteen laboratories participated in this certification study and were asked to measure saxitoxin and decarbamoyl-saxitoxin in rehydrated lyophilized mussel material and in a saxitoxin-enriched mussel material. The participants were allowed to use a method of their choice but with an extraction procedure to be strictly followed. The study included extra experiments to verify the detection limits for both saxitoxin and decarbamoyl-saxitoxin. Most participants (13 of 15) were able to meet all the criteria set for the certification study. Results for saxitoxin.2HCl yielded a certified mass fraction of <0.07 mg/kg in the rehydrated lyophilized mussels. Results obtained for decarbamoyl-saxitoxin.2HCl yielded a certified mass fraction of 1.59+/-0.20 mg/kg. The results for saxitoxin.2HCl in enriched blank mussel yielded a certified mass fraction of 0.48 +/- 0.06 mg/kg. These certified reference materials for paralytic shellfish poisoning toxins in lyophilized mussel material are the first available for laboratories to test their method for accuracy and performance.     

Announcing a new international peer-reviewed journal:Food Science and Human Wellness now accepting manuscript submission in English

<正>We are pleased to announce the launch of a new international peer-reviewed journal-Food Science and Human Wellness,ISSN 2213-4530,which is an open access journal,produced and hosted by Elsevier B.V.on behalf of Beijing Academy of Food Sciences.Food Science and Human Wellness is an international peer-reviewed English journal that provides a forum for the dissemination of the     

Chinese CTP Market

According to Printing and Printing Equipment Industries Association of China（PEIAC）＇s statistics to the plate manufucturer in China, in 2013, the actual offset plate production has reached 346 million square meters in China. Among them, the CTP production volume was 245 million square meters, up by 11% than that of last year; the total sales of the CTP plate was 239 million square meters, up by 13%.     

Preparatory Work of Print China 2015 is Going Smoothly

正Held at Guangdong Modern International Exhibition Center,Print China 2015 will cover 7exhibition halls,besides the original Hall No.3,4,5,6,7,the newly built F zone of Hall 3 will be used too.The total area will be140,000 square meters.Hall 3:Offset and large printing equipment,package printing equipment,post press