用∑WESH图评价某涂料化工厂的可持续性

介绍了在清洁生产过程中用∑WESH图评价涂料化工厂的可持续发展的原理及方法,并进行了一个实例的评价.从该厂的∑WESH图得出该厂的水及能源的利用率高,所用的原材料的稀缺性都不大,唯一较严重的问题是二甲苯的通过量大,危害性较严重.因此建议该厂在配方上尽量减少二甲苯的使用,开发新产品.     

喷涂前处理污染源的分析及其处理措施

随着我国国民经济的快速发展和国家"节能减排"重点项目的深入开展,各种污染源的分析及其处理措施的研究备受关注.本文在充分研究若干家电企业的钢铁喷涂制件的前处理工艺(如:预脱脂、脱脂、清洗、表调、磷化等)的基础上,分析喷涂前处理过程中的污染源,研究污染源的处理措施.     

酿酒酵母细胞表达异源萜类化合物的研究进展

萜类化合物具有可观的经济价值,但是目前的生产过程复杂、产量低。酿酒酵母甲羟戊酸途径为萜类化合物的合成提供直接前体,因此酿酒酵母细胞具有合成异源萜类化合物的天然优势。对酿酒酵母甲羟戊酸途径的清晰认识是对其进行有效利用的基础,本文从代谢途径、关键酶的特点和全局调控机制3个方面对该途径进行了介绍。从代谢途径的构建和优化、模块与底盘细胞的适配、模块构建及组装方式的角度概述了酿酒酵母细胞异源合成单萜、倍半烯萜、二萜、三萜类化合物的研究进展。指出实现酿酒酵母高效合成萜类化合物所需要解决的基础问题是对酿酒酵母甲羟戊酸途径进行更为全面了解和对萜类化合物的天然代谢途径进行明确解析;另外,合成生物学的进一步发展也将为此提供应用基础。     

香叶油的研究进展

为了全面了解香叶油的研究现状,为我国香叶油的开发利用提供思路, 综述了香叶的栽培、组培技术研究、香叶油的应用、香叶油的提取及化学成分研究、香叶油调配研究等方面的现状,并对香叶品种的遗传改良提出一些有益的建议.     

胶原纤维的性能特点和作用

1胶原纤维巴西Novaprom胶原纤维是以精选的牛皮内剖层(真皮)组织提取的,它不同于明胶或明胶的衍生物。它的生产是在严格控制的时间和温度范围内进行的,从而确保其主要成分──胶原蛋白的活性不变,并以天然纤维的形式存在。它在肉制品中的结构呈纤维状而不是一般的胶冻,因而这种结构是非常稳定的,是不可逆的。它是很好的功能性动物纤维蛋白,在肉制品及鱼糜制品等相关的食品中得到广泛的应用。2胶原纤维的性能及相关指标(1)蛋白质含量:胶原纤维中的动物蛋白质(M×6.25)高达98%,含有人体必需的氨基酸。(2)吸水、持水性:胶原纤维结构良好,呈矩…     

鲜为人知的科学珍闻

有言在先,珍闻的挑选奉行以下原则:科学应该是有趣的,科学之所以好玩,部分原因在于你了解、知道这些奇谈怪论的存在。科学的伟大之处在于,它不必是教条的、有价值的实验,也不要求对所有理论进行最准确的过滤以得     

玻璃纤维拉丝池窑配合料设备研制的进展

玻璃纤维池窑拉丝生产线配合料的制备中,原料是形成优质玻璃液的基础,因此可以说配合料的稳定性、均匀性和准确性对玻璃纤维的质量起着决定的作用.生产实践证明:组分和粒度均匀的配合料,不但能强化玻璃液的熔化和澄清过程,而且还能减少或消除影响玻璃质量的各种弊病.所以认真拟定玻璃纤维原料的成分和选择玻璃纤维的种类和化学性质:严格控制进厂原料化学成分、粒度和水份;做好原料的分堆、存放、加工、称量、混合、输送是优质配合料制备不可缺少的手段,这也是做好玻璃纤维池窑配合料的基本任务.     

氢氧化镁阻燃剂的研究进展

主要论述了国内外阻燃剂的种类和发展,指出由于环境和健康的原因,无机阻燃剂是最有发展前途的,其中的氢氧化镁因其特有的性质,在无机阻燃剂中尤为突出.考虑到氢氧化镁的广泛应用的前景和其本身的缺点,对其改性成为业界的研究重点,其中主要介绍了钛酸酯、硬脂酸(盐)、镁盐晶须和胶囊化等技术,指出以后的发展方向是在改性基础上的协同作用.     

高浸透性大分子聚酯乳液的研制

1前言 随着池窑生产的发展,原有的浸润剂在快速浸润性和快速浸透性方面无法得到满足.意大利DSM公司聚酯乳液是公认的喷射纱浸润剂最好的成膜剂.本项目的目的是研制出能工业化生产的与DSM公司产品质量相当的聚酯乳液,替代进口,节约外汇,满足我国池窑发展需要,争创良好的经济社会效益.     

宁静——使艺术深华

宁静的山是心灵的绘画,宁静的水是灵魂的诗篇,宁静的夜是精神的书籍。在这越来越充斥着物欲纵横的社会,浮躁成了现代人的代名词,而保持一颗宁静的心,尤其在艺术创作中显得尤为重要。     

底座连接口特征参数对显示器后壳注塑质量的影响分析

在Moldflow分析软件的基础上,对显示器后壳进行仿真研究,以翘曲变形量为质量指标,结合控制变量法进行单因素变动实验,保持注射工艺参数不变,研究显示器后壳底座连接口对制品翘曲变形的影响.对数据进行图表分析,结果表明显示器后壳尺寸定位68.58 cm(27英寸)时,底座连接口选用圆形,连接口位置距离底边26 mm,尺寸...     

The role of the symmetry and the flexibility of the anion on the characteristics of the nanostructures and the viscosities of ionic liquids☆

The transport properties of ionic liquids (ILs) are crucial properties in view of their applications in electrochem-ical devices. One of the most important advantages of ILs is that their chemical–physical properties and conse-quently their bulk performances can be well tuned by optimizing the chemical structures of their ions. This will require elucidating the structural features of the ions that fundamentally determine the characteristics of the nanostructures and the viscosities of ILs. Here we showed for the first time that the“rigidity”, the order, and the compactness of the three-dimensional ionic networks generated by the anions and the cation head groups determine the formation and the sizes of the nanostructures in the apolar domains of ILs. We also found that the properties of ionic networks are governed by the conformational flexibility and the symmetry of the anion and/or the cation head group. The thermal stability of the nanostructures of ILs was shown to be con-trolled by the sensitivity of the conformational equilibrium of the anion to the change of temperature. We showed that the viscosity of ILs is strongly related to the symmetry and the flexibility of the constitute ions rather than to the size of the nanostructures of ILs. Therefore, the characteristics of the nanostructures and the viscosities of ILs, especially the thermal stability of the nanostructures, can be fine-tuned by tailoring the symmetry and the conformational flexibility of the anion.     

浅谈设备的性能与操作对胎面压出质量的影响

简要介绍了胎面压出的工作原理及工艺过程，对设备的配置及操作对胎面压出质量的影响进行了分析，并对压出过程中常见的质量缺陷、造成的原因以及解决措施提出了自己的见解。     

Investigation of the effects of fatty acids on the compressive strength of the concrete and the grindability of the cement

In cement industry, a great energy consumption has been observed during grinding of clinker. To reduce this consumption, some waste products have been used as grinding aids.In this investigation, the effects of sunflower oil (SO), oleic acid (OA), stearic acid (SA), myristic acid (MA) and lauric acid (LA) on the fineness and strength of the cement have been examined. These aids were added into clinker in certain ratios based on the cement clinker weight and the grinding has been done for a definite time at the same condition.All of the fatty acids used increased the fineness as compared with the cement without the grinding additives. SO and OA decreased the strength significantly, LA decreased it to a lesser extent and SA increased it definitely according to the common cement. But MA did not alter the strength of the cement as much as SA. In addition, the covering of the balls influences the grinding of cement clinker unfavourably.     

煤粉流动性对GSP气化炉气力输送的影响研究

针对GSP气化装置煤粉气力输送在试车阶段出现的煤粉锁斗下料不畅、发料罐输送性能不佳等问题,从原料煤性质和工业装置的改进方面出发,通过煤粉的流动性参数的测量与研究,分析出现上述工程问题可能的内在原因,并提出工业装置改进方法,为保证GSP煤粉气力输送工业装置的正常运行提供解决办法。     

The effect of the length of the oxyethylene chain on the conductivity of the polyurethaneurea electrolyte

Polyurethaneureas (PUU), which were synthesized from 4,4′-diphenylmethane diisocyanate (MDI), poly(ethylene glycol) (PEG), and 3,5-diaminobanzoic acid (DABA), were used as polyelectrolytes in this study. Differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR) were used to monitor the effect of the various kinds of PEG on the changes in morphology of PUU electrolytes corresponding to the concentration of lithium perchlorate (LiClO₄) dopants. The results of DSC and FT-IR indicate the Li⁺ ions coordinate with the soft and hard segments. Additionally, the crystallinity of the PEG soft segment and the ordered hydrogen-bonded urea carbonyl groups decreased with increasing salt concentration. Impedance spectroscopy (IS) measurements show that the PUU electrolyte with the high phase separation degree has the high ionic conductivity. The hard-segment T_g and the soft-segment T_m influence the conductivity behavior of polyelectrolytes with increasing measurement temperature.     

煤的溶胀处理对药用腐植酸提取的影响研究

以气煤、肥煤、焦煤、瘦煤为样煤,进行了样煤的粉碎、有机溶剂溶胀和硝酸氧化处理,考察了处理后煤样中的药用腐植酸得率。结果表明,吡啶和N,N-二甲基吡咯烷酮是溶胀较好的溶剂;样煤粉碎后,随着粒度的减小,煤的溶胀率增加;粒度粉碎至200目的气、肥煤经吡啶溶胀和硝酸氧化后,煤样的药用腐植酸得率可达到73.0%和71.4%,而经甲醇溶胀和硝酸氧化的200目气煤药用腐植酸得率为56.4%和58.4%。实验结果表明,煤样经过溶胀和硝酸氧化处理,对药用腐植酸的提取有促进作用。     

Effect of the drafting force on the strength of the bottom of the spinneret

In spinning basalt fibres, the drafting force is in the same range as in spinning of glass fibres. The effect of the drafting force can not be considered in the calculation for the strength and rigidity of the bottom of the spinneret. __________ Translated from Khimicheskie Volokna, No. 5, pp. 47–50, September–October, 2007.     

转子挤压组合凹模的应力分析

组合凹模的应力分析是一个非常复杂的问题，对其进行精确分析是解决模具寿命的关键。本文采用有限元分析软件Ansys对转子的组合凹模进行了分析，为转子组合凹模的优化设计提供了依据。     

Effect of the density of the electronic states at the valence orbital of the bridge redox molecule on the dependence of the tunnel current on the overvoltage in the case of fully adiabatic electron transition

Effect of the density of the electronic states at the valence orbital of the bridge redox molecule on the dependence of the tunnel current on the overvoltage and on the width at half maximum of the current-overvoltage curve is studied. A number of the approximate expressions for the density of states, the tunnel current and the width are obtained in the fully adiabatic limit for different particular cases. It is shown that at small values of the coupling of the electronic levels of the electrodes with the valence orbital of the redox molecule and the small values of the bias voltage two regions of the reorganization Gibbs energy exist with different dependence of the width on the reorganization Gibbs energy. The results of calculations of the density of states, the tunnel current and the width are presented and used for the interpretation of the experimental data [N.G. Tao, Phys. Rev. Lett. 76 (1996) 4066, I. Visoly-Fisher, K. Daie, Y. Terazono, C. Herrero, F. Fungo, L. Otero, E. Durantini, J.J. Silber, L. Sereno, D. Gust, T.A. Moore, A.L. Moore, S.M. Lindsay, PNAS 103 (2006) 8686].