改进粒子群优化Takagi-Sugeno模糊径向基函数神经网络的非线性系统建模

针对复杂非线性系统建模的难点问题,提出了一种基于改进的粒子群优化算法（PSO)优化的T-S模糊径向基函数（RBF）神经网络的新型系统建模算法。该算法将T-S模糊模型良好的可解释性及RBF神经网络的自学习能力相结合,构成T-S模糊RBF神经网络用于系统建模,并采用动态调整惯性权重的改进的PSO算法结合递推最小二乘算法实现网络参数的优化调整。首先,利用所提算法进行了非线性多维函数的逼近仿真,仿真结果均方差（MSE）为0.00017,绝对值误差不大于0.04,逼近精度较高;又将该算法用于建立动态流量软测量模型,并进行了相关的实验研究,动态流量测量结果平均绝对误差小于0.15L/min,相对误差为1.97%,基本满足测量要求,并优于已有算法。上述仿真及实验研究结果表明,所提算法对于复杂非线性系统具有较高的建模精度和良好的自适应性。     

基于BP神经网络的电子设备故障诊断技术

故障诊断涉及模式分类与识别问题,神经网络对外界输入样本有很强的识别分类能力,能很好地实现非线性曲面的逼近.因此神经网络在设备故障诊断中能很好地得到应用,BP神经网络是目前最为广泛和成功的神经网络之一.介绍了BP神经网络在电子设备故障诊断技术中的应用,讨论了BP神经网络的算法和改进算法及其诊断过程,并对某型电台的故障诊断进行了MATLAB仿真.     

基于PID神经网络的非线性动态系统控制

基于PID神经网络的控制器可以完成变量的单输入-单输出非线性系统的任务.该控制器采用BP(误差反向传播)算法来修正连接权重值,通过在线训练和学习,使目标函数到达最优值.充分利用了BP神经网络算法逼近任意连续有界非线性函数的能力,显示了神经网络在解决非线性系统方面的潜能.为了达到控制的目的,和其他非线性建模技术相比较,PID神经网络有几个明确的优点和它独特的用法相一致.仿真结果表明,在对非线性动态系统控制时,基于PID神经网络的控制系统具有很强的灵活和高效性,能取得良好的控制效果.     

基于复合正交神经网络的自适应逆控制系统

目前，在自适应逆控制系统中常采用BP神经网络，而BP网络存在算法复杂、易陷入局部极小解等不足。而正交神经网络能克服BP网络的不足，但由于正交神经网络学习算法存在某些局限性，提出了一种复合正交神经网络，该正交网络结构与三层前向正交网络相同，不同的是正交网络的隐单元处理函数采用带参数的Sigmoid函数的复合正交函数，该神经网络算法简单，学习收敛速度快，并能对网络的函数参数进行优化，为非线性系统的动态建模提供了一种方法。仿真实验表明，网络在用于过程的自适应逆控制中具有很高的控制精度和自适应学习能力。该动态神经网络比其它神经网络具有更强的建模能力与学习适应性，有线性、非线性逼近精度高等优异特性，非常适合于实时控制系统。     

一种小型惯性测量单元的精确标定技术

研究了一种基于MEMS陀螺和加速度计的惯性测量单元(IMU)的系统标定技术,建立了陀螺和加速度计的温度漂移和非线性误差模型,采用逐步线性回归法对以上模型进行了简化,并设计了补偿算法;实时补偿效果表明,在-40℃~60℃的温度变化范围内,惯性测量单元的零位偏值、偏值稳定性和非线性度都达到较高精度,这种误差标定方法可有效解决MEMS-IMU惯性器件误差的标定与补偿问题。     

基于PSO-WNN的MEMS陀螺随机误差建模普适性分析

针对MEMS陀螺仪随机误差对系统导航精度影响以及现有建模方案存在个体普遍适用性问题,提出将粒子群优化算法(PSO)与小波神经网络(WNN)结合后对MEMS陀螺随机误差进行预测的建模方法,完成小波神经网络的构建。利用小波函数作为神经网络中隐含层的激励函数,同时将小波神经网络各层的连接权值作为粒子群优化算法中粒子的位置,使得建立的模型函数逼近能力更加灵活有效且增强其容错能力,同型号不同个体MEMS传感器建模补偿实验结果表明,论文提出的PSO-WNN误差建模方法预测的MEMS陀螺仪随机误差均值和标准差分别优于0.025°/s和0.13°/s,补偿后的MEMS陀螺Allan方差分析结果进一步验证了论文所提方法的可行性与普适性。     

基于PSO算法的WNN大包线增益调参控制律设计

提出了一种基于粒子群优化算法的小波神经网络大包线调参控制律设计方法.该方法用小波函数代替了Sigmoid函数作为激活函数.由于结合了小波变换良好的高频域时间精度、低频域频率精度的性质和神经网络的自学习功能,因而具有较强逼近非线性函数的能力.为了克服局部极小值问题并进一步提高对非线性函数逼近能力,利用粒子群优化算法对小波神经网络进行参数训练,并利用该网络实现了大包线增益调参.飞行仿真结果表明,所设计的小波神经网络增益调参控制器具有优良的控制性能,不仅能够保证平衡状态下的控制效果,而且在未训练的平衡状态下依然具有良好的控制性能,并且在存在20%的建模误差时,最大超调量仅为6 m,仅是使用常规增益调参方法的18%.     

控制增益符号未知的不确定非线性系统鲁棒自适应控制

针对一类控制增益函数及符号均未知的不确定非线性系统,基于反推滑模设计方法,提出一种鲁棒自适应神经网络控制方案.结合Nussbaum增益设计技术和神经网络逼近能力,取消了控制增益函数及符号已知的条件,应用积分型Lyapunov函数避免了控制器奇异性问题,并通过引入神经网络逼近误差和不确定干扰上界的自适应补偿项消除了建模误差和不确定干扰的影响.理论分析证明了闭环系统所有信号半全局一致终结有界,仿真结果验证了该方法的有效性.     

基于改进BP神经网络的函数逼近性能对比研究

为了正确反映实际应用中经常采用的6种典型BP神经网络的改进算法的非线性函数逼近能力,本文从数学角度详细阐述这6种典型BP神经网络的改进算法的学习过程,简要地介绍MATLAB工具箱中设计BP网络的训练函数,最后在MATLAB环境下设计具体的网络来对指定的非线性函数进行逼近实验,并对这6种典型BP神经网络的改进算法的性能差异进行对比。仿真结果表明,对于中小规模网络而言,LM优化算法逼近性能最佳,其次是拟牛顿算法、共轭梯度法、弹性BP算法、自适应学习速率算法和动量BP算法。     

基于分片线性函数逼近的非线性观测器设计

综合分片线性函数模型辨识/逼近和鲁棒观测器设计方法,研究了一大类非线性鲁棒观测器设计方法.所提出的算法能有效解决非线性系统的辨识/建模问题,并保证在一定的逼近精度下观测误差可以控制在一定的范围内,且观测误差随着逼近精度的提高而减小.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

How do children do mathematics with LOGO?

Abstract  This paper considers some results of a study designed to investigate the kinds of mathematical activity undertaken by children (aged between 8 and 11) as they learned to program in LOGO. A model of learning modes is proposed, which attempts to describe the ways in which children used and acquired understanding of the programming/mathematical concepts involved. The remainder of the paper is concerned with discussing the validity and limitations of the model, and its implications for further research and curriculum development.