Configuring retroreflective markings to enhance the night-time conspicuity of road workers

This study investigated whether the night-time conspicuity of road workers can be enhanced by positioning retroreflective strips on the moveable joints in patterns that convey varying degrees of biological motion. Participants were 24 visually normal adults (12 young M = 26.8 years; 12 older M = 72.9 years). Visual acuity, contrast sensitivity and glare sensitivity were recorded for each participant. Experimenters acting as road workers walked in place on a closed road circuit within simulated road work sites, facing either the oncoming driver or the roadway (presenting sideways to the driver) and wearing one of four clothing conditions: (i) standard road worker vest; (ii) standard vest plus thigh-mounted retroreflective strips; (iii) standard vest plus retroreflective strips on ankles and knees; (iv) standard vest plus retroreflective strips positioned on the extremities in a configuration that conveyed biological motion (“biomotion”). As they drove along the closed road participants were instructed to press a button to indicate when they first recognized that a road worker was present. The results demonstrated that regardless of the direction of walking, road workers wearing biomotion clothing were recognized at significantly (p < 0.05) longer distances (3×), relative to the standard vest alone. Response distances were significantly shorter for the older drivers. Contrast sensitivity was a better predictor of the ability to recognize road workers than was visual acuity or glare sensitivity. We conclude that adding retroreflective strips in the biomotion configuration can significantly improve road worker conspicuity regardless of the road worker's orientation and the age of the driver.     

Bicyclists overestimate their own night-time conspicuity and underestimate the benefits of retroreflective markers on the moveable joints

Conspicuity limitations make bicycling at night dangerous. This experiment quantified bicyclists’ estimates of the distance at which approaching drivers would first recognize them. Twenty five participants (including 13 bicyclists who rode at least once per week, and 12 who rode once per month or less) cycled in place on a closed-road circuit at night-time and indicated when they were confident that an approaching driver would first recognize that a bicyclist was present. Participants wore black clothing alone or together with a fluorescent bicycling vest, a fluorescent bicycling vest with additional retroreflective tape, or the fluorescent retroreflective vest plus ankle and knee reflectors in a modified ‘biomotion’ configuration. The bicycle had a light mounted on the handlebars which was either static, flashing or off. Participants judged that black clothing made them least visible, retroreflective strips on the legs in addition to a retroreflective vest made them most visible and that adding retroreflective materials to a fluorescent vest provides no conspicuity benefits. Flashing bicycle lights were associated with higher conspicuity than static lights. Additionally, occasional bicyclists judged themselves to be more visible than did frequent bicyclists. Overall, bicyclists overestimated their conspicuity compared to previously collected recognition distances and underestimated the conspicuity benefits of retroreflective markings on their ankles and knees. Participants mistakenly judged that a fluorescent vest that did not include retroreflective material would enhance their night-time conspicuity. These findings suggest that bicyclists have dangerous misconceptions concerning the magnitude of the night-time conspicuity problem and the potential value of conspicuity treatments.     

Seeing pedestrians at night: Visual clutter does not mask biological motion

Although placing reflective markers on pedestrians’ major joints can make pedestrians more conspicuous to drivers at night, it has been suggested that this “biological motion” effect may be reduced when visual clutter is present. We tested whether extraneous points of light affected the ability of 12 younger and 12 older drivers to see pedestrians as they drove on a closed road at night. Pedestrians wore black clothing alone or with retroreflective markings in four different configurations. One pedestrian walked in place and was surrounded by clutter on half of the trials. Another was always surrounded by visual clutter but either walked in place or stood still. Clothing configuration, pedestrian motion, and driver age influenced conspicuity but clutter did not. The results confirm that even in the presence of visual clutter pedestrians wearing biological motion configurations are recognized more often and at greater distances than when they wear a reflective vest.     

Using reflective clothing to enhance the conspicuity of bicyclists at night

Bicycling at night is more dangerous than in the daytime and poor conspicuity is likely to be a contributing factor. The use of reflective markings on a pedestrian's major joints to facilitate the perception of biological motion has been shown to greatly enhance pedestrian conspicuity at night, but few corresponding data exist for bicyclists. Twelve younger and twelve older participants drove around a closed-road circuit at night and indicated when they first recognized a bicyclist who wore black clothing either alone, or together with a reflective bicycling vest, or a vest plus ankle and knee reflectors. The bicyclist pedalled in place on a bicycle that had either a static or flashing light, or no light on the handlebars. Bicyclist clothing significantly affected conspicuity; drivers responded to bicyclists wearing the vest plus ankle and knee reflectors at significantly longer distances than when the bicyclist wore the vest alone or black clothing without a vest. Older drivers responded to bicyclists less often and at shorter distances than younger drivers. The presence of a bicycle light, whether static or flashing, did not enhance the conspicuity of the bicyclist; this may result in bicyclists who use a bicycle light being overconfident of their own conspicuity at night. The implications of our findings are that ankle and knee markings are a simple and very effective approach for enhancing bicyclist conspicuity at night.     

Are car daytime running lights detrimental to motorcycle conspicuity?

For a long time, motorcycles were the only vehicles with daytime running lights (DRLs), but this conspicuity advantage has been questioned due to the rapidly increasing introduction of DRLs on cars as well. The present experiment was designed to assess effects of car DRLs on motorcycle perception in a situation that specifically brought attentional conspicuity to bear. Photographs representing complex urban traffic scenes were displayed briefly (250 ms) to 24 participants who had to detect vulnerable road users (motorcyclists, cyclists, pedestrians) appearing at different locations and distances. Car DRLs hampered motorcycle perception compared to conditions where car lights were not on, especially when the motorcycle was at a greater distance from the observer and when it was located in the central part of the visual scene. Car DRLs also hampered the perception of cyclists and pedestrians. Although the globally positive safety effect of car DRLs is generally acknowledged, our study suggests that more attention should be paid to motorcyclists and other vulnerable road users when introducing car DRLs. Several means of improving motorcycle conspicuity in car DRL environments are discussed.     

Conspicuity, memorability, comprehension, and priming in road hazard warning signs

This study assessed driver reactions to 16 road hazard warning signs of various formats by projecting life-sized video of road scenes to drivers in a driving simulator. A range of measures, including attentional and search conspicuity, implicit and explicit recognition, dynamic and static comprehension, and sign priming were collected. Of the signs tested, road works and school warning signs were most often detected, remembered, and understood. Slippery surface warnings were associated with some of the lowest detection and comprehension rates. The effectiveness of the different formats depended on the type of hazard sign. In the case of road works warnings, a flashing variable message format was only slightly more conspicuous than the large dimension format, equal in comprehensibility, and perhaps somewhat worse in terms of memorability. For the school warnings, however, the flashing variable message format appeared to convey a greater sense of potential hazard, produced superior search conspicuity and priming, and was equal in terms of memorability and comprehensibility. The range of measures worked well as a whole with the two measures of conspicuity and the measure of static comprehension showing the greatest consistency.     

The alerting effect of hitting a rumble strip—A simulator study with sleepy drivers

A moving base driving simulator experiment was carried out in order to investigate the effects of milled rumble strips on driver fatigue. There were rumble strips both at the edge line and centre line. Four different physical designs of milled rumble strips (yielding noise values from 1.5 to 16 dBA) and two placements on shoulder were used in the experiment. Sound and vibrations from real milled rumble strips were reproduced in the simulator. In total 35 regular shift workers drove during the morning hours after a full night shift. The main results showed an increase in sleepiness indicators (EEG alpha/theta activity, eye closure duration, standard deviation of lateral position, subjective sleepiness) from start to before hitting the rumble strip, an alerting effect in most parameters (not subjective sleepiness) after hitting the strip. The alertness enhancing effect was, however, short and the sleepiness signs returned 5 min after the rumble strip hit. Essentially no effects were seen due to type of strip. It was concluded that various aspects of sleepiness are increased before hitting a rumble strip and that the effect is very short-lived. Type of strip, as used in the present study did not have any effect.     

Travel exposure and choice of comparison crashes for examining motorcycle conspicuity by analysis of crash data.

Much research has been conducted examining the problem of motorcycle road crashes. Most of this research has concluded that motorcyclists have a conspicuity problem, particularly during the day. This type of research has often involved comparing multi-vehicle motorcycle crashes with single vehicle motorcycle crashes occurring during the day and night. The aim of this paper is to point out that comparison of single and multiple vehicle motorcycle crashes juxtaposes subsets of crashes with clearly different causes (car drivers' possible failure to detect a motorcyclist against motorcyclists' loss of vehicle control). Comparing groups of crashes for which conspicuity can be posited as a common cause (car drivers' possible failure to detect a motorcyclist or car) may be a more enlightening comparison. The issue of exposure is also examined in this paper.     

Development of Two New Types of Retroreflective Materials as Countermeasures to Urban Heat Islands

In this study, the side effects of high-reflective and ordinary retroreflective materials, used as countermeasures to urban heat islands, are discussed. In addition, two retroreflective materials are proposed in order to avoid these adverse effects. These materials could be applied to roads and building exteriors to reduce their heat absorption from solar radiation. The first proposed type is the directional retroreflective material, which reflects light only during summer; therefore, it reduces the cooling load in summer, reduces the heating load in winter, and prevents light pollution at night. However, its structure is complicated and fragile; thus, it is suited for small areas, such as roofs and walls. The second type is the rough-surface retroreflective material, which shows weak retroreflectivity but can withstand distortion; thus, it is suited for roads. These two types require little maintenance, because they have no moving parts. Hence, these materials would not experience any breakdown, which is a great advantage for roads and building materials. Combining high-reflective, ordinary retroreflective, directional retroreflective, and rough-surface retroreflective materials, and assigning each type to the appropriate application would form an advanced mitigation system against urban heat islands.     

The influence of condition-based maintenance on workforce planning and maintenance scheduling

Condition-based maintenance (CBM) is generally considered an attractive maintenance policy for a single component: it uses the operating condition of the component to predict a failure event and therefore tries to avoid any unplanned downtime and unnecessary maintenance activities. However, operations managers tend to be much more interested in optimising the performance of the entire asset-system, where the grouping of maintenance activities and the availability of maintenance workers may play a role. Therefore, this paper focuses on the impact of using either CBM or age-based replacement (ABR) in serial and parallel multi-component systems (1) without worker constraints, (2) with a single internal maintenance worker, and (3) with external maintenance workers with a significant response time. With an internal maintenance worker, the sequential execution of maintenance activities prevents efficiency gains in the serial configuration and here CBM performs better. Also in the parallel configurations, the efficiency under CBM is generally better than under ABR. However, with external maintenance workers, CBM is not able to group maintenance activities as well as ABR, which results in a lower efficiency in the serial configuration. CBM performs better than ABR with respect to total maintenance costs, while ABR results in a smoother maintenance plan.     

Worker allocation in lean U-shaped production lines

U-shaped lines are widely used in lean systems. In U-shaped production lines, each worker handles one or more machines on the line: the worker allocation problem is to establish which machines are handled by which worker. This differs from the widely-investigated U-line assembly line balancing problem in that the assignment of tasks to line locations is fixed. This paper address the worker allocation problem for lean U-shaped production lines where the objectives are to minimize the quantity of workers and maximize full work: such allocations provide the opportunity to eliminate the least-utilized worker by improving processes accordingly. A mathematical model is developed: the model allows for any allocation of machines to workers so long as workers do not cross paths. Walking times are considered, where workers follow circular paths and walk around other worker(s) on the line if necessary. A heuristic algorithm for tackling the problem is developed, along with a procedure representing the ‘traditional’ approach of constructing standard operations routines. Computational experiments considering three line sizes (up to 20 machines) and three takt time levels are performed. The results show that the proposed algorithm both improves upon the traditional approach and is more likely to provide optimal solutions.     

An experimental investigation on flexural behavior of RC beams strengthened with prestressed CFRP strips using a durable anchorage system

This paper investigates the effectiveness and feasibility of a prestressed carbon fiber-reinforced polymer (CFRP) system for strengthening reinforced concrete (RC) beams. The proposed prestressing system with a novel anchorage allows the utilization of full capacity of the CFRP strips. Eight small-scale and two large-scale concrete beams strengthened different configuration of prestressed CFRP strips are tested under static loading conditions up to failure. The main parameters considered include the level of prestressing applied, ranging from 20% to 70% of the tensile strength of the CFRP strips, and the use of mechanical anchorages at both ends of the CFRP strips. Thanks to the durable anchorage, the full range of flexural behavior was investigated including post-debonding. The results indicate that the beams strengthened using prestressed CFRP strips exhibited a higher first-cracking, steel-yielding, and experimental nominal moments as the level of prestressing force increased up to a certain point. After analyzing prestress effects in small scale tests, an optimum prestress level for strengthening concrete beams using CFRP strips is proposed and verified in large scale tests.     

Moderate-to-high optical-isolation reconfigurable 1 x 2 fiber-optic add-drop switches using a dense wavelength division multiplexing thin-film filter

We propose and experimentally demonstrate thin-film filter- (TF) based reconfigurable 1 x 2 fiber-optic add-drop switch (FADS) structures. Our key idea is to locate a movable mirror oriented at a desired angle near the TF to switch the desired wavelength optical beams to the wanted switching ports. Our first moderate-optical-isolation TF-based reconfigurable 1 x 2 FADS is in a transmissive design. Another TF-based reconfigurable 1 x 2 FADS structure is in a retroreflective configuration, and it gives a very low optical-coherent cross talk. Our experimental proof of concept using an off-the-shelf four-cavity TF measured center wavelength at 1,545.749 nm and a 0.8 mm x 0.8 mm x 0.15 mm movable mirror confirms a -19 dB and a much improved <-53 dB optical-coherent cross talk for our transmissive and retroreflective configurations, respectively.     

A comparison of cross-training policies in different job shops

This research compares a set of cross-training policies represented by different numbers of cross-trained workers, additional skills per cross-trained worker, and additional machines. The policies are evaluated in job shops, represented by different efficiency losses, labour utilization, variability in processing times, and worker absenteeism. Our results show that adding one machine in each department and cross-training one or two workers from each department with one additional skill is generally sufficient to realize most of the benefits of cross-training. Cross-training is thus beneficial in most job shops, unless the cost of the minimal training and spare machines is high. Our results also show that the value of cross-training and adding machines depends very much on the environment, and it is better to spread cross-training over more workers than to train a few workers with more skills.     

The distribution of sleepiness,sleep and work hours during a long distance morning trip: A comparison between night- and non-night workers

Few studies have examined the extent of driver sleepiness during a long distance morning trip. Sleepiness at this time may be high because of night work, waking early to commence work or travel, sleep disorders and the monotony of driving long distances. The objective of this study was to estimate the prevalence of chronic sleepiness (Epworth sleepiness score ≥ 10) and sleep restriction (≤5 h) in a sample of 649 drivers. Participants driving between 08:00 and 10:00 on three highways in regional Australia participated in a telephone interview. Approximately 18% of drivers reported chronic sleepiness. The proportions of night workers (NW) and non-night workers (NNW) with chronic sleepiness were not significantly different but males reported a significantly greater proportion of chronic sleepiness than females. The NW group had a significantly greater proportion of drivers with ≤5 h of sleep in the previous 24 and 48 h, fewer nights of full sleep (≤4), acute sleepiness and longer weekly work hours. The NW group reported driving a significantly longer distance at Time 1 (Mean = 140.29 ± 72.17 km, versus 117.55 ± 89.74 km) and an additional longer distance to complete the journey (Mean = 89.33 ± 95.23 km, versus 64.77 ± 94.07 km). The high proportions of sleep restriction and acute sleepiness among the NW group, and the amount of chronic sleepiness in the NW and NNW groups reported during a long distance morning trip may be of concern for driver safety.     

Role of sensory and cognitive conspicuity in the prevention of collisions between motorcycles and trucks at T-intersections

Motorcyclists are particularly vulnerable to injury in crashes with heavy vehicles due to substantial differences in vehicle mass, the degree of protection and speed. There is a considerable difference in height between motorcycles and trucks; motorcycles are viewed by truck drivers from downward angles, and shorter distances between them mean steeper downward angles. Hence, we anticipated that the effects of motorcycle conspicuity treatments would be different for truck drivers. Therefore, this study aims to evaluate the effects of motorcycle conspicuity treatments on the identification and detection of motorcycles by truck drivers. Two complementary experiments were performed; the first experiment assessed the impact of motorcycle sensory conspicuity on the ability of un-alerted truck drivers to detect motorcycles, and the second experiment assessed the motorcycle cognitive conspicuity to alerted truck drivers. The sensory conspicuity was measured in terms of motorcycle detection rates by un-alerted truck drivers when they were not anticipating a motorcycle within a realistic driving scene, while the cognitive conspicuity was determined by the time taken by alerted truck drivers to actively search for a motorcycle. In the first experiment, the participants were presented with 10 pictures and were instructed to report the kinds of vehicles that were presented in the pictures. Each picture was shown to the participants for 600 ms. In the second experiment, the participants were presented with the same set of pictures and were instructed to respond by clicking the right button on a mouse as soon as they detected a motorcycle in the picture. The results indicate that the motorcycle detection rate increases, and the response time to search for a motorcycle decreases, as the distance between the targeted motorcycle and the viewer decreases. This is true regardless of the type of conspicuity treatment used. The use of daytime running headlights (DRH) was found to increase the detection rate and the identification of a motorcycle by a truck driver at a farther distance, but effect deteriorates as the distance decreases. The results show that the detection rate and the identification of a motorcyclist wearing a black helmet with a reflective sticker increases as the distance between the motorcycle and the truck decreases. We also found that a motorcyclist wearing a white helmet and a white outfit is more identifiable and detectable at both shorter and longer distances. In conclusion, although this study provides evidence that the use of appropriate conspicuity treatments enhances motorcycle conspicuity to truck drivers, we suggest that more attention should be paid to the effect of background environment on motorcycle conspicuity.     

Driving simulator validation for speed research

The behavioral validation of an advanced driving simulator for its use in evaluating speeding countermeasures was performed for mean speed. Using mature drivers, 24 participants drove an instrumented car and 20 participants drove the simulator in two separate experiments. Participants drove on roads which contained transverse rumble strips at three sites, as well as three equivalent control sites. The three pairs of sites involved deceleration, and were the approaches to stop sign intersections, right curves, and left curves. Numerical correspondence (absolute validity), relative correspondence (or validity), and interactive (or dynamic) relative validity were analyzed, the latter using correlations developed from canonical correlation. Participants reacted to the rumble strips, in relation to their deceleration pattern on the control road, in very similar ways in both the instrumented car and simulator experiments, establishing the relative validities. However, participants generally drove faster in the instrumented car than the simulator, resulting in absolute validity not being established.     

Influence of front light configuration on the visual conspicuity of motorcycles

A recent study (Cavallo and Pinto, 2012) showed that daytime running lights (DRLs) on cars create “visual noise” that interferes with the lighting of motorcycles and affects their visual conspicuity. In the present experiment, we tested three conspicuity enhancements designed to improve motorcycle detectability in a car-DRL environment: a triangle configuration (a central headlight plus two lights located on the rearview mirrors), a helmet configuration (a light located on the motorcyclist's helmet in addition to the central headlight), and a single central yellow headlight. These three front-light configurations were evaluated in comparison to the standard configuration (a single central white headlight). Photographs representing complex urban traffic scenes were presented briefly (for 250 ms). The results revealed better motorcycle-detection performance for both the yellow headlight and the helmet configuration than for the standard configuration. The findings suggest some avenues for defining a new visual signature for motorcycles in car-DRL environments.     

驾驶员对异色物体动态距离判识对比

为研究在动态环境中,颜色因素对驾驶员空间距离判识的影响,本文选用32名驾驶员在不同深度距离和车速条件下,进行实际道路试验.驾驶员分别在昼间、黄昏和夜间对不同颜色障碍物空间距离进行判识,分析检验判识结果.结果表明:在地面动态环境中,白天不同颜色距离判识差异不显著,黄昏随着环境照度下降,判识差异显著,夜间使用灯光照明时,距...     

Increasing motorcycles attention and search conspicuity by using Alternating-Blinking Lights System (ABLS)

Poor conspicuity of Powered Two-Wheelers (PTW) is one of the main factors contributing to their involvement in accidents. The current study examined the influence of different rider's outfits on PTWs’ detectability, and evaluated the potential of a unique Alternating-Blinking Lights System (ABLS) to increase the rider's conspicuity. This study included two experiments that examined the visual search involved in the process of scanning video clips of dynamic traffic scenes. The first experiment examined PTWs’ attention conspicuity, while the second evaluated PTWs’ search conspicuity. In the attention conspicuity experiment participants were not alerted to the possible presence of a PTW and were asked to report the types of vehicles that were present in each video clip. In the search conspicuity experiment the participants were asked to actively search for a PTW and report its presence or absence in each video clip. Every participant was presented with a series of 96 video clips, 48 with a PTW and 48 without (controls). The independent variables were: (i) level of ambient illumination, (ii) road type, (iii) PTW's initial distance from the viewer, and (iv) rider's outfit. The results of the attention conspicuity experiment indicated that the environmental context has a strong effect on the probability of detecting the PTW. The ABLS increased the PTWs’ attention conspicuity by moderating the effects of environmental context, and was most effective at dusk and in urban environments. The results of the search experiment indicated that detection rates decreased and reaction time (RT) increased as the level of luminance decreased. RT was shortest with the ABLS across all driving environments. The ABLS increased PTWs detection rates in both experiments and mitigated the difference in detection rates between the attention and search conspicuity experiments. The results indicated that the ABLS was the most potent conspicuity treatment of the ones evaluated in this study. In conclusion, PTW conspicuity should be enhanced by incorporating aspects of both attention and search conspicuity. The riders need to take into consideration the perceptual characteristics of their riding environment, and be equipped with a conspicuity aid that is less susceptible to the changing environment and provides the rider with a unique visual signature. In parallel, the expectancy of car drivers to the presence of PTWs should be increased.