共查询到20条相似文献,搜索用时 78 毫秒
1.
丁丁金安科技发展有限公司 《现代电视技术》2002,(11):135-138
前言 对于整个录音音响系统中,第一个重要环节是话筒.话筒的重要性是人们时常谈论的话题.话筒的争论往往是最激烈而革命性的,从电子管到晶体管、从动圈到电容、从微型话筒到金话筒,还有值得珍藏的纪念版话筒等.那么话筒今后将如何发展,国际上的最新动向是怎样的呢?我们将以丹麦某著名话筒制造商为例,简述一下话筒的最新发展. 相似文献
2.
3.
4.
<正> 首先应了解自己“家庭影院”(包括大屏幕彩电、VCD机、调音台或均衡器、功放机等)的话筒输入方式,您想将话筒从哪一部分输入等。如从VCD机或功放机的话筒输入插孔MIC输入,就要考虑您的VCD机或功放机对话筒的适应能力,主要是话筒的输入阻抗、频率响应、动态范围及话筒插头的大小等。有些音响(主要是有些进口音响)的话筒输入灵敏度很高,如选配600Ω及以上的中、高阻话筒,唱歌时将会产生啸叫;相反,有些音响的话筒输入灵敏度较低,如果选配200Ω的低阻 相似文献
5.
随着我国电子工业的迅速发展,驻极体传声器(简称为话筒)的市场需求量逐年增加。当前,国内话筒的生产能力相当大,其中几个较大的话筒生产厂年产量都在千万支以上。因此,每年对话筒专用场效应晶体管(简称话筒管)需要量就更为可观了,据估算,全国每年需要话筒管6~7万只以上。 近年来,在国内都一致认为日本三洋公司生产的2SK596是最适于生产话筒的晶体管。 相似文献
6.
7.
<正> 近年来,卡拉OK风靡全国各个角落,很多音像设备都带有卡拉OK功能,其中话筒是重要的部件。了解话筒的原理,合理使用话筒,对发挥好卡拉OK功能,和得到良好的音响效果,是十分重要的。 工作原理 目前,商业性的卡拉OK歌舞厅到家庭卡拉OK系统广泛使用的卡拉OK话筒,可分为有线卡拉OK话筒和无线卡拉OK话筒。 有线卡拉OK话筒 顾名思义,有线卡拉OK话筒的输出信号是通过一根电缆送往扩音设备的。其结构如图1所示。 相似文献
8.
电视作为视听媒体 ,声音在传递信息中起着至关重要的作用 ,它与画面相互补充 ,能更为准确真实地再现客观现实 ,同时声音还可以烘托气氛和传达感情 ,所以 ,在电视节目制作中 ,声音的拾取与画面的拍摄具有同样重要的作用 ,而在声音的采录中 ,首先必须正确使用话筒。话筒是一种将声源发出的声波转换成电信号的电声器件 ,在电视节目制作中使用最广泛的是电动式和电容式两种话筒。电动式话筒又包括动圈式话筒和带式话筒两种。动圈式话筒是广泛用于室内或室外电视节目制作的最经久耐用的一种话筒 ,它的最大优点是使用可靠、方便 ,这种话筒能在距离… 相似文献
9.
10.
11.
话筒在电视制作中的选择和使用 总被引:3,自引:2,他引:1
电视节目制作中声音质量的好坏,直接影响电视节目的质量。要保证电视节目声音的质量。必须正确地选择和使用话筒。讨论常用话筒的选择、使用以及影响声音质量和解决方法等问题。 相似文献
12.
不同传声器拾取男女语声的频率响应对比分析 总被引:1,自引:0,他引:1
通过阐述不同类型常用传声器的性能特点,采用实验的方式,分析男女语声的频谱结构.实验中,使用插件来记录各传声器对于男女语声的频率响应,将得到的数据绘制成频谱图,以此来比较不同传声原理及振膜尺寸的传声器在拾取男女语声后的重放频响.同时,与汉语普通话的平均频谱及元音的共振峰频谱图进行比较,对四类传声器在男女语声的重放音质上做... 相似文献
13.
This paper investigates the relation between the nonstationary sound source and the frequency domain magnitude ratio of two microphones based on short-term frequency analysis. The fluctuation level of nonstationary sound sources is modeled by the exponent of polynomials from the concept of moving pole model. According to this model, the sufficient condition for utilizing the fluctuation level and magnitude ratio to estimate the time delay between two microphones is suggested. Simulation results are presented to show the performance of the suggested method. 相似文献
14.
声源定位在当今日益智能化的社会中有着诸多方面的应用,特别是在智能控制,军事等领域。文中设计的系统以MSP430F449单片机为控制核心,步进电机驱动的小车作为移动声源载体,设计两个间距固定的麦克风作为接收设备,测量声源发声到麦克风接收到声音的时间差数据,声源通过无线模块接收到数据从而计算出声源的坐标,然后控制声源小车运行到指定坐标实现定位控制。经测试,本系统能精确的控制小车到达指定坐标点,系统工作稳定。 相似文献
15.
In this paper we present an analog circuit that determines the direction of incoming sound using two microphones. The circuit is inspired by biology and uses two silicon cochlea to determine the azimuthal angle of the sound source with respect to the axis of the two microphones using the time difference between the two microphone signals. A new algorithm, adapted to an analog VLSI implementation, is presented together with simulation and measurement results. 相似文献
16.
Halupka D. Mathai N.J. Aarabi P. Sheikholeslami A. 《Signal Processing, IEEE Transactions on》2005,53(6):2243-2250
This paper presents a hardware implementation of a sound localization algorithm that localizes a single sound source by using the information gathered by two separated microphones. This is achieved through estimating the time delay of arrival (TDOA) of sound at the two microphones. We have used a TDOA algorithm known as the "phase transform" to minimize the effects of reverberations and noise from the environment. Simplifications to the chosen TDOA algorithm were made in order to replace complex operations, such as the cosine function, with less expensive ones, such as iterative additions. The custom digital signal processor implementing this algorithm was designed in a 0.18-/spl mu/m CMOS process and tested successfully. The test chip is capable of localizing the direction of a sound source within 2.2/spl deg/ of accuracy, utilizing approximately 30 mW of power and 6.25 mm/sup 2/ of silicon area. 相似文献
17.
18.
This paper deals with the study of structural noise in a capacitive MEMS microphone, which consists of a fully clamped circular micro-plate. The micro-plate is subjected to a bias DC voltage and sound pressure waves. Due to the nonlinearity and displacement dependency of the electrostatic force, the amplitude of the applicable bias DC voltage has some limitations and also this nonlinearity causes the generation of super or sub-harmonic responses and consequently the initiation of the structural noise in capacitive microphones. In order to determine the amplitude of the generated structural noise in these microphones, the first order multiple scales method is used and asymptotic analytical solution of the dynamic response is presented. The effects of the bias DC voltage value on the fundamental frequency, sensitivity and consequently on the amplitude of the structural noise of the microphone are studied. In addition the effects of the sound pressure frequency and amplitude on the value of structural noise are investigated. 相似文献
19.
针对驱动电机某一运转工况的噪声声压级与电机噪声频率的测试问题,提出了一种运用声学照相机SeeSV与传声器相结合,并同时检测电机振动信号的测试方法。通过选取SeeSV的不同频段对噪声源进行定位识别,分离出驱动电机的噪声频段,运用传声器测定电机的噪声强度,并用振动信号对声压信号进行验证。测试结果表明,用SeeSV和传声器相结合的方法,可在复杂噪声中识别出驱动电机的噪声频率为2 66625 Hz,声压级为607 dB,对工程噪声的评价具有实践意义。 相似文献
20.
在麦克风阵列声源定位中,不同阵列阵型及声源频率高低均对定位结果产生影响,探讨上述不同变量对定位结果产生误差的定量分析。使用到达时间差测量(TDOA)算法,运用16个麦克风分别组成十字型、同心圆、方型、L型、Y型阵列,探讨不同形状的麦克风阵列在不同频率声源下所产生的定位误差,并在Matlab上进行仿真分析,尝试得到较为准确的声源定位结果,提出一种误差最小的用于麦克风阵列声源定位的同心圆阵列阵型。 相似文献