Flow visualization glass-ceramic: Preliminary experimental and modelling results

A glass-ceramic material was developed to act as a flow visualization material. Preliminary experiments indicate that aperiodic, thermally induced, convective flows can be sustained at normal processing conditions. These flows and the stress and temperature gradients induced are most likely responsible for the anomalous behaviour seen in these materials and the difficulties encountered in their development and in their production on industrial and experimental scales. A simple model describing the dynamics of variable-viscosity fluids was developed and was shown to be in qualitative agreement with more sophisticated models as well as with experimental results. The model was shown to simulate the dependence of the critical Rayleigh number for the onset of convection on the viscous properties of the fluid at low T, and also to simulate quenching behaviour when the temperature differences were high.Nomenclature C _p Heat capacity - D, E, F Expansion coefficients - H Height of the roll cell - Pr Prandtl number - R _a Rayleigh number - R _c Critical Rayleigh number for the onset of convection in a constant-viscosity fluid - S Dimensionless stream function - T Temperature - T _m Mean temperature - T ₀ Bottom surface temperature - T _r Reference temperature - a Aspect ratio of cell - g Acceleration due to gravity - k Thermal conductivity - k ₁ Function related to ²v/T ² - k ₂ Function related to ⁴v/T ⁴ - r Rayleigh number ratioR _a/R _c - t Time - w Dimensionless vertical coordinate - w _m Mean cell height - x Horizontal coordinate - y Dimensionless horizontal coordinate - z Vertical coordinate - , Constants - _t Thermal expansion coefficient - Constant in viscosity function - T Temperature difference between top and bottom surfaces - _i Viscosity coefficients - Kinematic viscosity - _m Mean kinematic viscosity - Dimensionless kinematic viscosity - Thermal diffusivity - Non-linear temperature function - Dimensionless non-linear temperature function - _o - Stream function - Dimensionless time - Eigenvalues     

Strength of the pyroceram So115M under lengthy static loading

The article presents the results of long-time strength tests of the casting pyroceram SO115M at room temperature by the method of three-point bending. We obtained the power dependence of the time to failure _f on the applied load : _f ^–11.7.Translated from Problemy Prochnosti, No. 1, pp. 102–104, January, 1996.     

Thermal diffusivity of inhomogeneous systems

The possibility of analyzing the nonsteady temperature fields of inhomogeneous systems using the quasi-homogeneous-body model is investigated.Notation t, t_I, t_i temperature of quasi-homogeneous body inhomogeneous system, and i-th component of system - a, , c thermal diffusivity and conductivity and volume specific heat of quasi-homogeneous body - a_{i i}, c_i same quantities for the i-th component - q heat flux - S, V system surface and volume - x, y coordinates - macrodimension of system - dimensionless temperature Fo=a/² - Bi=/ Fourier and Biot numbers - N number of plates - =h/ ratio of micro- and macrodimensions - _V, volumeaveraged and mean-square error of dimensionless-temperature determination - time - m_i i-th component concentration Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 1, pp. 126–133, July, 1980.     

On the analysis of tunneling data for A15 superconductors

We examine the applicability of the standard McMillan inversion of Eliashberg's equations for superconductors with a nonconstant electronic density of statesN(). We do this usign simple models forN() and a realistically shapedN() taken from recent band structure work for Nb₃Sn. It turns out that peak structure inN() near _F may lead to gross errors in the derived Eliashberg function ²F() when the energy dependence ofN() is omitted in the inversion procedure. For Nb₃Sn, this leads to a 40% overestimate of when ²F() is evaluated via the standard McMillan program.     

Changes in surface characteristics of dental resin composites after polishing

The objectives of this study were (1) to determine in vitro changes in surface roughness and color of dental resin composites after application of three finishing and polishing systems; (2) to evaluate the difference in color stability after immersion in a dye solution after polishing; and (3) to evaluate the effects of surface condition, especially roughness, on measured color depending on the color measuring geometries of specular component excluded (SCE) and specular component included (SCI). Color and surface roughness (R_a) of resin composites of four brands of A2 shade and one brand of Yellow Enamel shade were measured after polymerization, after polishing with Enhance (Dentsply), Sof-Lex (3M ESPE), or Super-Snap (Shofu) composite finishing and polishing systems. Color was also measured after immersion in 2% methylene blue solution. Color was measured according to the CIELAB color scale. Color changes (E*_ab) after polishing/staining and by the measuring geometry were calculated by the equation; E*_ab = [(L*)² + (a*)² + (b*)²]^1/2. Ra value was measured with a surface roughness tester. E*_ab and L* values after polishing and after staining varied among polishing systems when measured with SCE geometry. Composites polished with Super-Snap and Sof-Lex systems showed higher E*_ab and L* values than those polished with Enhance polishing system with SCE geometry. E*_ab and L* values between specimens with different surface conditions measured with SCE geometry were significantly higher than those with SCI (p < 0.01). Changes in R_a value after polishing was insignificant in most cases.     

Measurements of Critical Current of Superfluid 4He through An Array of Submicron Apertures very near Tλ

Far from the lambda transition the critical flow of superfluid ⁴ He through a small orifice is determined by thermal nucleation of quantized vortices. Between 300 mK and 2 K linearly decreasing critical flow velocity has been observed earlier. As the temperature approaches T the size of the vortex core increases and becomes comparable to that of the orifice. We report here measurements of the critical mass current in this temperature range. An array of 24 3×0.17 m holes in parallel with a macroscopic parallel path and flexible-diaphragm Helmholtz resonator have been used. The temperature range explored was from 80 mK to 20 K below T. Preliminary analysis of the data shows that for a reduced temperature t=(T–T)/T1·10 ^–4 the critical current scales approximately as t ^1.25 . Closer to T the critical phase difference across the array becomes comparable to 2 and the results have to be analyzed in terms of Josephson effect. The superfluid density has been measured at the same time as the critical current.     

Shock response of stainless steel at high temperature

Measurements of the dynamic tensile strength of HR-2 (Cr-Ni-Mn-N) stainless steel have been carried out over the initial temperature range of 300 K–1000 K at shock stress of 8 GPa, the corresponding spall strength _f and Hugoniot elastic limit _HEL are determined from the wave profiles. In the temperature range of 300 K–806 K, _f and _HEL decrease linearly with increasing temperature T, i.e., _f = 5.63-4.32 × 10^–3T, _HEL = 2.08-1.54 × 10^–3T, but when heated to 980 K, _HEL increases from 0.84 GPa at 806 K to 0.93 GPa at 980 K and _f keeps at an almost fixed value of 2.15 GPa. The TEM analysis on recovery samples identified the existence of intermatallic compound Ni₃Al and the carbide Cr₂₃C₆ in the sample of 806 K, another intermatallic compound Ni₃Ti was found in the sample of 980 K. All these products emerge along crystal boundary. While no such products were found in the samples of 300 K and 650 K.     

Specific heat near the lambda point in 4He and 3He-4He mixtures: Test of universality of the critical exponent and the amplitude ratio,and observation of the critical-tricritical crossover effect

The specific heat under saturated vapor pressure of pure ⁴He and of six ³He-⁴He mixtures up to X = 0.545 was measured in the temperature range 3 × 10^–6 <¦T-T ¦ <10^–2 K. The critical exponents and along the path = are independent of X up to X = 0.545, where (= ₃ – ₄) is the difference between chemical potentials. If we take account of higher order terms, the exponent (= ) and the amplitude ratio A /A are independent of X up to X = 0.545. The values of and A /A are –0.023 and 1.090, respectively. The critical-tricritical crossover effect was observed for X = 0.545 and the boundary of crossover region closest to the critical region was at /T = (1–2) × 10^–4, where is the distance ¦T – T ¦ along the path = . This value is in good agreement with the estimated value by Riedel et al. But, remarkably, in the case of X = 0.439 this effect was not observed.     

Microstructural study of ε-iron-carbonitrides formed by a glow discharge technique

The microstructure and phase transformations occurring in-iron-carbonitrides have been studied by means of X-ray and electron diffraction, electron microscopy and Mössbauer spectrometry. Ordering of the interstitial atoms, N or C, results in a hexagonal unit cell for Fe₃(C, N) with parametersa=a3 andc=c wherea andc are the lattice parameters of the hexagonal close-packed (h c p) iron unit cell. Stacking faults on (0001) planes and partial dislocations with Burgers vector b=1/31 0 ¯1 0 are observed in quenched-Fe₄ (C, N). After quench-aging, the carbonitrides show a structural hardening due to the precipitation of a metastable phase. Slow cooling of-carbonitrides with less than 25 at% interstitials leads to the precipitation of-carbonitride and ferrite in-phase grains which allows the orientation relationships between the-,- and-phases to be defined and a model of the-phase--phase transformation to be proposed.     

Temperature and randomness dependence of the pair-breaking parameter in superconducting aluminum films

Magnetoconductance and excess conductance due to superconducting fluctuations in aluminum films are measured in order to study the temperature dependence of the pair-breaking parameter at temperatures nearT _c . The parameter _M is estimated from the relation =/8k _B T_in, where _in is the inelastic scattering time deduced from the analysis of the magnetoconductance. The parameter _F is determined by fitting theories to data on the excess conductance at zero magnetic field. It is shown that: (1) For films with a wide range of the sheet resistanceR , 12R 200 /, the temperature dependence of _M nearT _c agrees well with the theory of Brenig et al. (2) For clean films withR 100 /, the value of _F analyzed with theories including the correction term to the Maki-Thompson contribution shows almost the same temperature dependence as _M . In a film withR 200 /, however, a discrepancy between _M and _F remains.On leave from College of General Education, Kyushu University, Ropponmatsu, Fukuoka, Japan.     

Application of coherent-optical methods in physical studies of evaporation

The application of the methods of laser and holographic interferometry to the problems of measuring evaporation rates is examined. Mass transfer accompanying evaporation in the region of extradiffusion monitoring is studied.Notation j_v specific mass flux of the vapor, kg/(m²·sec) - _c coefficient of condensation - _v coefficient of evaporation - D coefficient of diffusion - m²/sec, wetting angle - R radius of the vessel, m - time, sec - h height of the segment, m - wavelength of the laser radiation, m - N order of the interference fringe or the number of fringes passing through a given point - density of the matter, kg/m³ - length of the cell with the liquid of interest, m - T temperature, K - n refractive index of the medium - m mass - kg, V volume of the spheroidal segment, m³ - _liq and _g molar mass, kg/mole - C₀ and C_p concentration of vapor in the gas, kg/m³ - a and b semiaxes of the spheroid, m - _e ellipsoidal coordinate of a point on the surface, m² - c/n derivative along the normal - r coordinate of a point on the surface of evaporation, m - n change in the refractive index of the medium Indices st standard liquid - liq liquid - g gas - 0 starting state - p equilibrium pressure Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 55, No. 4, pp. 605–611, October, 1988.     

Stress relaxation in hot-drawn low density polyethylene

The tensile stress relaxation behaviour of hot-drawn low density polyethylene, (LDPE), has been investigated at room temperature at various draw ratios. The drawing was performed at 85° C. The main result was an increase in relaxation rate in the draw direction, especially at low draw ratios when compared to the relaxation behaviour of the isotropic material. This is attributed to a lowering of the internal stress. The position of the relaxation curves along the log time axis was also changed as a result of the drawing, corresponding to a shift to shorter times. The activation volume, , varied with the initial effective stress ₀ ^* according to ₀ ^* 10kT, where ₀ ^* =₀ — _i, is the difference between the applied initial stress, ₀, and the internal stress _i. This result supports earlier findings relating to similarities in the stress relaxation behaviour of different solids.     

Dependence of helium II viscosity properties on oscillation frequency

The causes of a discrepancy in the results of measurements of He II viscosity below T 1.6 k obtained with different measurement methods are investigated. It is shown that to obtain correct results in oscillation experiments, the condition _ph should obtain, where is the depth of viscous wave penetration and _ph is the phonon free path length. Results of viscosity measurements at different ratios /_ph (by a wire viscometer) are presented. It is shown that for the condition _ph, the results obtained are in good agreement with the results of Andronikashvili (in which /_ph > 100). If the mentioned relation is not satisfied, then, as the value of the ratio /_ph is decreased, the value measured for the viscosity is increasingly lower than the results of Andronikashvili.     

Anisotropic grain growth of R-α-sialon (R = Nd and Er)

Two R--sialon (R_0.6Si_9.3Al_2.7O_0.9N_15.1, R=Nd and Er) compositions were first fired at 1750°C/25 min and 1650°C/2 h respectively for completion of the phase transformation. Elongated -sialon grain morphology was developed in both samples after being re-fired at 1800°C for different periods of time. The growth in width of R--sialon grains is controlled by diffusion in the liquid, while the length growth tends to be interfacial reaction controlled. The anisotropic growth of R--sialon is attributed to the large difference in the growth rate constant between the length and the width directions of the grain.     

Thermodynamic properties of the superconductorsBaPb 0.7 Bi 0.3 O 3 andBa 0.7 K 0.3 BiO 3 using Eliashberg theory

We present results of a thermodynamic analysis for the superconductors compounds BaPb_0.7Bi_0.3O₃ and Ba_0.7K_0.3BiO₃. The physical quantities are calculated making use of the Eliashberg theory and the electron-phonon spectra ²()F() as calculated by Shirai et al. For the superconductor BaPb_0.7Bi_0.3O₃, several models of the ²()F() were studied looking for a better agreement with experimental data. The best fit is achieved with a simple constant scaling (C = 1.25) of the Shirai's spectra. The functional derivative of the deviation function D(t) with respect to changes in ²()F() is also calculated.     

Die Herleitung von Schalengleichungen über ein erweitertes Variationsprinzip bei Berücksichtigung der Querschubverzerrungen

Ohne ZusammenfassungBezeichnungen L Bezugsgrößen für dimensionslose Koordinaten - L charakteristische Schalenabmessung - t Schalendicke - Schalenparameter - körperfeste, krummlinige, dimensionslose Koordinaten der Schalenmittelfläche - Dimensionslose Koordinate in Richtung der Schalennormalen - i, j,...=1,2,3 Indizierung des dreidimensionalen Euklidischen Raumes - ,,...=1,2 Indizierung des zweidimensionalen Riemannschen Raumes - (...), Partielle Differentiation nach der Koordinate - (...), Kovariante Differentiation für Tensorkomponenten des zweidimensionalen Raumes nach der Koordinate - (...)| Kovariante Differentiation für Tensorkomponenten des dreidimensionalen Raumes nach der Koordinate - Variationssymbol - a ,a ₃ Basisvektoren der Schalenmittelfläche - V Verschiebungsvektor - U ,U ₃ Verschiebungskomponenten des Schalenraumes - v ,w,w ,W Verschiebungskomponenten der Schalenmittelfläche - Verhältnis der Metriktensoren des Schalenraumes und der Schalenmittelfläche - _ik Verzerrungstensor des Raumes - _{(, )}, Symmetrische Verzerrungstensoren der Schalenmittelfläche - _{[, ]} Antimetrischer Term des Verzerrungsmaßes - ^, Spannungstensor - n ,m ,q Tensorkomponenten der Schnittgrößenvektoren - p ,p,c Tensorielle Lastkomponenten     

Heat capacity near the lambda point in 4He under pressure. Experimental test of scaling laws and universality

C _p along six isobars was determined near T from measurements of C _v and (P/T) _v along isochores. The critical exponent was independent of pressure, while was dependent on pressure, when the data are fitted to a single power law. The value of A/A was found to be 1.04 ± 0.05 over the entire pressure range by adding a higher order singularity. That is, the results obtained are the best fit using renormalization group theory, but are partly inconsistent with the heat capacity measurement by Ahlers.     

Ageing characteristics of dendritic and non-dendritic (stir-cast) Zn-Al alloy (ZA-27)

The dimensional changes of dendritic and non-dendritic (stir-cast) Zn-Al alloy (ZA-27) were investigated during ageing at temperatures in the range 20–245 °C. The linear expansion of both dendritic and non-dendritic samples increased rapidly with ageing time after about 24 h at 95 °C. An initial normalization treatment led to a large initial growth of the alloy which increased further after prolonged ageing times ( 10⁴h). Accelerated ageing tests in the range 75–250 °C showed that increasing the ageing temperature decreased the long term linear expansion of the alloy. In comparing the behaviour of the two materials, the stir-cast material grew less than the dendritic alloy. Extensive SEM and TEM done on as-stir-cast and aged samples showed that the main changes during ageing occurred in the (FCC) lamellae of the +(Zn) eutectoid, the phase at the primary _particles/_eutectoid interface and in the interparticle areas. In the lamellae and at the interface, zinc precipitated whilst the phase precipitated in the interparticle areas. It is considered that the occurrence of this latter phase, rich in copper, is responsible for the growth of stir-cast material during ageing.     

Fatigue of metallic glasses

The fatigue behaviour of Ni₄₉Fe₂₉P₁₄B₆Si₂, Ni₄₈Fe₂₉P₁₄B₆Al₃ and Pd_77.5Cu₆Si_16.5 metallic glasses is examined. In the finite lifetime regime the relationship between stress amplitude ( _a), fracture stress ( _f), mean stress ( _m) and cycles to failure (N _f) is _a=A( _f–_m) (2N _f) ^b , whereA andb are 16.9 and –0.40 respectively for reduced gauge section Ni₄₉ strips (for _m 140 kg mm^–2) and 27.0 and –0.44 for Pd base wires. These results are unusual in thatA 1. Consequently, a sharp discontinuity exists near _a( _f– _m) –1. In a simple tensile test failure occurs at _f(=_y) and 2N_f=1; for peak stresses only a percent or so less than _f the sample will withstand hundreds of cycles of stress. For uniform cross-section glassy metal filaments, a fatigue limit is observed at stress ratios ( _a/ _f) in the vicinity of 0.07 to 0.15. The fatigue limit for reduced section specimens is a factor of 2 higher. Fatigue failure of the Ni-Fe strips may occur under partially or fully plane stress or plane strain conditions, depending on sample thickness and stress. Final failure of the Pd_77.5Cu₆Si_16.5 wires always occurs by general yielding of the remaining section.     

Analytical Theory of DC SQUIDS Operating in the Presence of Thermal Fluctuations

A comprehensive analytical theory of symmetric DC SQUIDs is presented taking into account the effects of thermal fluctuations. The SQUID has a reduced inductance < 1/ where = 2LI_c/₀, L is the loop inductance, ₀ is the flux quantum, and I_c is the critical current of the identical Josephson junctions which are assumed to be overdamped. The analysis, based on the two dimensional Fokker–Planck equation, has been successfully performed in first order approximation with considered a small parameter. All important SQUID characteristics (circulating current, current-voltage curves, transfer function, and energy sensitivity) are obtained. In the limit 1( = 2k_BT/I_c0 is the noise parameter, k_B is the Boltzmann constant, and T is the absolute temperature) the theory reproduces the results of numerical simulations performed for the case of small thermal fluctuations. It was found that for < 1 the SQUID energy sensitivity is optimum when is higher than 1/, i.e., outside the range for which the present analysis is valid. However, for 1 the energy sensitivity has a minimum at L = L_F , where L_F = ( ₀ /2) ²/k_B , and therefore, in this case, the optimal reduced DC SQUID inductance is _opt = 1/, i.e., within the range for which the present analysis is valid. In contrast to the case of an RF SQUID, for a DC SQUID the transfer function decreases not only with increasing L/L_F but also with increasing (as 1/). As a consequence, the energy sensitivity of a DC SQUID with < 1/ degrades more rapidly (as ⁴ ) with the increase of than that of an RF SQUID does (as ² ).