Taxonomic study of subfamily Nepetoideae (Lamiaceae) by polynomorphological approach

The present study is insight into pollen morphology for characterizing species and their utility in the taxonomic separation of certain taxa of subfamily Nepetoideae (Lamiaceae) from Pakistan. The pollen micromorphology of 11 species of the Nepetoideae was analyzed and documented using light microscopy and scanning electron microscopy (SEM) for both qualitative and quantitative characteristics. Most species have hexazonocolpate pollen grains but trizonocolpate and tetrazonocolpate pollen with circular and oval amb were also rarely observed in Mentha spicata. The basic pollen shape in most of the studied species was subspheroidal but prolate grains were also observed in M. spicata, S. coccinea, and S. plebeia. The exine sculpturing of Nepetoideae pollen was taxonomically very informative particularly at subfamily level. Observations of exine sculpturing with SEM revealed various types of pollen grains: reticulate, bireticulate, microreticulate, perforate, aerolate, and gammate. The bireticulate type further subdivided into three subtypes based on the number of secondary lumina in each primary lumen and is characterized by varying characteristics of the secondary reticulum and primary muri. A significant variation was observed in colpus surface ornamentation. The maximum polar diameter was found in O. americanum (58 ± 5.8 μm) and the maximum equatorial diameter observed in O. basilicum (50.25 ± 1.37 μm). Pollen features of the studied species were discussed and compared based on the current taxonomical concepts. The results showed that pollen traits of the subfamily Nepetoideae was found significant to classify the taxa. Furthermore, pollen features provide additional evidence to distinguish macromorphologically similar taxa from each other.     

Palyno‐morphological investigations of subtropical endangered flora of Capparidaceae through light and scanning electron microscopy

The research was performed to investigate pollen morphology of endangered species of Capparidaceae in subtropical regions of Pakistan. The distinguishing characters were investigated by using light microscope and scanning electron microscope. Palynological study is comprised of pollen shape, pollen type, exine sculpturing, polar and equatorial diameter, length and width of colpi, mesocolpium, and exine thickness. In polar view, Cleome viscosa exhibited the highest pollen size 26.4 (32.7–24.5 μm) ±0.776 whereas Capparis spinosa appeared to be the lowest 12.6 (14.5?10.7 μm) ±0.400. In equatorial view, Cleome viscosa had the largest pollen size 17.1 (20.0–15.0 μm) ±0.606 and Capparis spinosa had the smallest pollen size 9.7 (12.50–8.00 μm) ±0.394. The maximum fertility percentage has been observed in Capparis spinosa, that is, 98.96% and minimum in Cleome viscosa, that is, 82.93%. Diagnostic key has been constructed to state the essential diagnostic features by means of which the taxa can be identified. Remarkable variations have been observed in pollen size, shape, and exine sculpturing. All the selected species were tricolporate. Prolate to subprolate pollen were observed. There is a great variation existed in exine sculpturing such as in Capparis decidua and C. sp. nova sculpturing is reticulate, in Capparis himalayensis sculpturing is Scabrate granulate, in Capparis spinosa sculpturing is Psilate, in Cleome viscosa sculpturing is regulate‐reticulate, in Dipterygium glaucum sculpturing is regulate and in Gynandropsis gynandra sculpturing is striate‐regulate. On the basis of overall characteristics of pollen it seems that palynology of this family is helpful at the generic and specific level.     

Palynological characteristics of some selected species of family Cucurbitaceae (Juss.) using light and scanning electron microscopy techniques

The pollen morphology of 11 species distributed in seven genera belonging to family Cucurbitaceae has been studied using light microscopy (LM) as well as scanning electron microscopy. Pollen morphology of this family is diverse and is almost europalynous. Nearly all types of pollen belonging to different size class and shape class with a variety of exine sculpturing are found in the family. Pollen grains are usually triporate to tricolporate, prolate, oblate‐spheroidal, spheroidal, to suboblate, radially symmetrical, and isopolar. The common exine pattern is reticulate of various forms ranging from finely reticulate to coarsely reticulate with some species having echinate type of exine ornamentation, for example, Cucurbita pepo and Praecitrullus fistulosus. Most of the studied species are somewhat triangular with respect to equatorial outlook and circular to elliptic in polar outlook. The palynological characteristics of the members of the family are useful in identification of taxa at generic level mostly. Based on the present study it is not recommended to wholly solely depend upon the pollen morphology for the identification of taxa especially at specific levels because very minor differences regarding pollen characters exist among the species of the same genera.     

Pollen micromorphological analysis of tribe Acacieae (Mimosaceae) with LM and SEM techniques

The morphology of pollen grains of the 06 species of tribe Acacieae (Mimosaceae) belonging to one genus were investigated using scanning electron microscopic (SEM) and light microscopic (LM) approach. Lactic acid acetolysis method was used for (LM) while non‐acetolysis for (SEM). The species were examined for the both qualitative and quantitative palynological features. Qualitatively the pollen was studied for the shape, exine sculpturing, pollen shape, and pollen type. Oblate spheroidal shape of pollen was observed in Accacia modesta. Subprolate shape in Accaca nilotica. In Accacia farnesiana, prolate pollen was examined while prolate spheroidal in Acacia tortilis and spheroidal pollen grains were studied in Acacia catechu, respectively. Pollen exine sculpturing of the studied tribe possesses novel variation. Foveolate, reticulate, foveolate‐psilate, faint reticulate, fossulate, perforate, and scrabate exine sculpturing were noticed. Colpi were absent in all species. Excessive variation was observed in both qualitative and quantitative character of pollen. SPSS software was use for the quantitative measurement of the pollen grains. The current study will be helpful for the identification of the problematic species and phylogenetic studies of family Mimosaceae.     

Palynological investigation of lactiferous flora (Apocynaceae) of District Rawalpindi,Pakistan, using light and scanning electron microscopy

This was the first comprehensive pollen micromorphological investigation of lactiferous flora (Apocynaceae) of District Rawalpindi, Pakistan. The pollen morphology of 10 species of the family Apocynaceae was observed and documented using light microscopy and scanning electron microscopy. Pollen was found subspheroidal in shape in most of the species, however peroblate shape was noted in Vinca major. Exine sculpturing patterns (psilate, rugulate, scabrate, and microreticulate) were observed. The result indicated that exine ornamentation of Apocynaceae taxa is systematically informative at generic and species levels. Most of the species have tricolporate type pollen but tetraporate pollen was also observed in Trachelospermum jasminoides and tetracolpate in V. major. Minimum equatorial diameter was noted in Carissa edulis (27.13 μm) and maximum in V. major (108.25 μm). Similarly, maximum exine thickness was found in Cascabela thevetia (9.5 μm). In the present findings, the pollen morphological data are compared with available other pollen studies to evaluate the taxonomic value of pollen traits in Apocynaceae taxa by using multiple microscopic techniques. Furthermore, molecular and phylogenetic studies were recommended to strengthen the systematics of Apocynaceae taxa.     

Palyno-morphological attributes of some selected plant species of family Asteraceae from district Dera Ismail Khan,KPK, Pakistan

The current study aimed to investigate the palyno-morphological features of Asteraceous species from District Dera Ismail Khan, Khyber Pakhtunkhwa, Pakistan. A total of 13 species were collected, pressed, identified, and examined by using light and scanning electron microscopy. Both qualitative and quantitative pollen characters were observed, that is, equatorial and polar diameter, number of pores and colpi, exine thickness, exine sculpturing, pollen shape, and P/E ratio. Pollen shapes observed in studied taxa were spheroidal, suboblate, oblate-spheroidal, and lophate-spheroidal. The aperturation patterns of pollens vary from tricolporate to tetracolporate. The maximum polar and equatorial diameter of 75–100 (87.5 ± 13.6) μm and 87.5–117.5 (102.5 ± 16.4) μm, respectively, was recorded in Echinops echinatus, while minimum polar and equatorial diameter of 20–22.5 (21 ± 1.36) μm and 22.5–25 (23.5 ± 1.36) μm, respectively, was recorded in Aster subulatus. Six types of exine sculpturing patterns were observed; echinate, micro-echinate, echinate-microreticulate, microreticulate, echinate-perforate, and scabrate. Maximum exine thickness of 8.75 μm was recorded in E. echinatus and minimum of 1.25 μm in Launaea mucronata. The pollen morphology has valuable significance in understanding the taxonomy of different plant groups and plays a central role in the correct identification and classification of Asteraceous flora at species, generic, and tribe levels.     

Pollen diversity and its implications to the systematics of mimosaceous species by LM and SEM

In this study we have discussed pollen morphology of 14 mimosaceous species belonging to five genera by using light microscopy (LM) and scanning electron microscopy (SEM). The palynological features of species were determined by both qualitative and quantitative characters. The qualitative characters include pollen shape, colpi arrangement, and exine sculpturing. Oblate spheroidal shaped pollens were noted in Albizia procera, Albizia lebbeck, Acacia tortilis, Acacia ampliceps, and Acacia modesta, subprolate shaped pollen in Leucaena leucocephala, Prosopis julifera, and Acacia nilotica, prolate pollen in Acacia farnesiana and Prosopis glandulosa while spheroidal, sub spheroidal and sub oblate pollen grains were observed in Acacia catechu, Mimosa himalayana, Prosopis cineraria, respectively. Sparsely foveolate, reticulate, scabrate, and scrobiclate exine sculpturing were observed. Colpi with sunken ornamentation were seen in P. cineraria, P. glandulosa, P. juliflora, and L. leucocephala while colpi were absent in rest of the studied species. The quantitative characters were statistically studied using SPSS software. The current study gives important morpho‐palynological characters for identifying and validation of close related and similar taxa which will aid to the phylogenetic analysis of Mimosaceae family.     

Authentication of the therapeutic Lamiaceae taxa by using pollen traits observed under scanning electron microscopy

Herbal medicines are gaining popularity worldwide for human healthcare because of their therapeutic potential. However, adulteration and use of unauthentic raw herbals as substitutes have become a major issue for the local communities and industry for reasons of safety and efficacy. Therefore, the authentication of medicinal plants before their use in herbal medicines is a need of time. Hence, the present study was designed with an aim, to authenticate the therapeutic Lamiaceous taxa by using pollen traits observed under scanning electron microscopy. Pollen micro-morphological studies solve the problem through discrimination and correct identification of the Lamiaceae species from the adulterants. Based on pollen features, Lamiaceae were further divided into two sub-families Lamioideae (tricolpate) and Nepetoideae (hexa-colpate). The pollen grains of Lamioideae were found as small to medium-sized, tricolpate, radially/bilateral symmetrical, sub-spheroidal and oblate shape. Besides, exine patterns bireticulate, reticulate and micro-reticulate, colpus surface sculpturing as psilate, gemmate, scabrate, and verrucate have also been reported. A significant variation was found in the pattern of the reticulum, thickness, and the number of secondary lumina per primary lumen. Similarly, Nepetoideae has a hexa zono-colpate pollen but tri and tetra zono-colpate pollen have also been observed. Hence, this study contributes to the authentication and correct identification of medicinally important Lamiaceae taxa by using scanning electron microscopic techniques and can help to solve the adulteration problem. Highlights

• Authentication of medicinally important Lamiceous taxa was carried out through scanning electron microscopic techniques.
• Chemotaxonomic characterization was used for the accurate identification of the therapeutic taxa.
• The medicinal, palynological and phytochemical significance of Lamiaceae taxa were evaluated.
• A significant variation was seen in the palynological traits that help in the determination and authentication of the therapeutic Lamiaceous species.
• Based on the chemotaxonomic characterization, our study can help to solve the adulteration problem for the reason of safety and efficacy.

     

Comparative pollen and foliar micromorphological studies using light microscopy and scanning electron microscopy of some selected species of Lamiaceae from Alpine Zone of Deosai Plateau,Western Himalayas

The study was conducted to highlight a detailed account of morphology of pollen chosen species of Lamiaceae through scanning electron microscopy, and the anatomical characteristics of leaf epidermis of seven species using simple light microscopy. In results, Anisomeles indica and Otostegia aucheri belong to subfamily Lamioideae because it has tricolpate pollen while the rest eight species belong to subfamily Nepetoideae (hexacolpate pollen). The exine sculpturing of pollen of studied species was found to be reticulate. In the family Lamiaceae, four kinds of stomata were found anomocytic, anisocytic, diacytic, and actinocytic, respectively. The cell wall patterns of epidermal cells were irregular or polygonal with straight or undulate walls. It was noted that the variety of the epidermal trichomes seems of taxonomically important for the identification of species of Lamiaceae. Both nonglandular and glandular trichomes were analyzed. The nonglandular trichomes were characterized with long, thin, and pointed apical unicellular cells. The nonglandular trichomes were A‐shaped in Thymus linearis. In Perovskia abrotanoides, stellate glandular trichomes were observed whereas in A. indica and Mentha royleana both glandular and nonglandular trichomes were found. In A. indica, the nonglandular trichomes were sessile and peltate in M. royleana. For the first time in this study, pollen and foliar micromorphological features of selected species of this area are carried out. These taxonomic characters were found to be important in discrimination of species from each other. In future, the detailed study with comprehensive morphology coupled with other important characters is required for delimitation of taxa at various levels.     

Taxonomic importance of pollen morphology in Veratrum L. (Melanthiaceae) using microscopic techniques

Previous studies reported that intrageneric relationships of genus Veratrum of family Melanthiaceae are controversial and hard to delimit. Therefore, we observed the pollen morphological features of six species in the genus Veratrum in detail using both light microscopy and scanning electron microscopy and investigated their significance for Veratrum taxonomy. Among them, five were studied for the first time. The results demonstrated that pollen grains of Veratrum are medium in size with P/E being 0.31–0.60. Three types of shape in polar view have been observed elliptic, long‐elliptic, or wide‐elliptic with blunt or rounded at both ends. Two types of width of colpus reported narrow or wide, two types of depth of colpus reported deep or flat, and two types of length of colpus reported extend almost or do not extend to the ends, whereas two types of colpus membranes reported absent or obvious. One type of surface ornamentation was noted as reticulate. These results support species Veratrum album and Veratrum lobelianum as well as Veratrum grandiflorum and Veratrum oxysepalum as two independent species, respectively, rather than classifying Veratrum into two sections. Overall, we demonstrated that the ratio of polar axis length to equatorial axial length, pollen characteristics at the polar view, the colpus morphology, and the surface ornamentation of pollen grains of genus Veratrum have important systematic significance in identification and delimitation of species.     

Scanning electron microscopic imaging of palynological metaphors: A case study of family Poaceae taxa

This study highlighted the taxonomic utilization of palynological metaphors for selected members (53) of family Poaceae. Multiple microscopic technique light and scanning electrons had been employed for detailed analysis. Results reported monad pollen type in all studied 53 members, which showed its limited taxonomic value up to family level. In relation to shape of pollen both polar and equatorial views strikingly differed from each other. Like semi angular pollen observed in Dactyloctenium aegyptium (L.) Wild. whereas round-minutely irregular pollen in Lolium temulentum L. Polar and equatorial diameter also showed variation, that is, Desmostachya bipinnata (L.) Stapf. can be differentiated from Sorghum bicolor (L.) Moench on diameter variation basis. A pore characteristic does not show much qualitative variation; however pore sizes differ species to species. The most frequently scarbate sculpturing was observed in 28 species followed by verrucate. Hence it can be said that pollen shape, polar, and equatorial diameters, pore size, P/E ratio, pore sculpturing are of good taxonomic value and holds a significant position in identification and delimitation of Poaceae taxa.     

Pollen morphology of Oxalis species from Buenos Aires province (Argentina).

Pollen morphology and the degree of pollen variability within nine species and two varieties of Oxalis species from Buenos Aires Province (Argentina) were studied using light microscopy (LM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Oxalis pollen grain is generally 3-colpate and the shape is prolate spheroidal, oblate spheroidal or spheroidal. The exine is microreticulate. The brochi are circular to polygonal; brochi sizes decrease near the colpi. The colpus membrane observed in unacetolysed material, is crustate or granular. The colpus length varies within a species; the largest grains are produced in stamens with long filaments and the smallest ones in stamens with short filaments. Four pollen types are distinguished by means of LM, SEM and TEM. They are recognized mostly on the basis of their colpus membrane structure. In conclusion, the morphological similarity among Oxalis species is also reflected in their pollen morphology.     

Morpho-palynological investigation of gymnospermal flora from subalpine and alpine zones of northern Pakistan using LM and SEM

The pollen morphology, with special reference to exine sculpture, of some species of the gymnosperms was assessed for the first time from the subalpine and alpine zones of western Himalayas northern Pakistan. The pollen of all these species is airborne and allergenic, so pollen morphology helps for identification of this allergenic pollen at specific level. Different morpho-palynological characteristics were analyzed including size range of pollen, polar and equatorial diameter ratio, exine ornamentation, sculpturing, exine thickness, pollen type, and shape. For accurate and quick identification of species, taxonomic key was made based on different morpho-palynological characteristics. The quantitative data were processed using SPSS software. Gymnospermal pollen includes inaperturate, rarely 1-colpate observed in (Cupressaceae), hexazonocolpate in (Ephedraceae), vesiculate, bissacate in (Pinaceae), and inaperturate in (Taxaceae). Different pollen shapes observed were prolate (4 spp), sub-spheroidal (7 spp), and oblate (1 spp). Variation was observed in exine sculpturing granular (4 spp), reticulate (1 spp), areolate-punctate (3 spp), and psilate (2 spp). This is based on the analysis of 10 plants belonging to four families of gymnosperms. Distinct pollen shape has emerged as the most diagnostic feature to separate some genera such as spheroidal in (Cupressaceae, Taxaceae), prolate and radiosymmetrical in (Ephedraceae), and bilateral in (Pinaceae). Exine thickness and sculpturing proved to be helpful at generic and specific levels. The results reinforced the significance of gymnospermal pollen morphological features which were used as aid for valuable taxonomic tool in plant systematics.     

Palyno‐morphological investigations of halophytic taxa of Amaranthaceae through SEM from Salt range of Northern Punjab,Pakistan

The pollen morphology of 11 salt tolerant plant species of family Amaranthaceae from the salt range of Northern Punjab, Pakistan has been studied. The palyno‐morphological characters were examined using light and scanning electron microscope. The examined all salt tolerant species have a slight difference in size but have similarity in shape, pore ornamentation, and polarity. The observed morphological characters of pollen grains were pollen symmetry, size, shape, pore ornamentation, pore size, number of pores, exine thickness, polar and equatorial diameter and, P/E ratio. Apolar type of pollens has been observed in all species. Shape of pollens was spheroidal. Exine sculpturing of pollen grains was scabrate (six spp), microechinate (four spp), and microechinate‐scabrate (one spp). Different pori numbers were observed in different species. The pantoporate aperturate and sunken pore ornamentation have been reported in all species. A pollen taxonomic key was developed using examined morphological characters for the accurate identification of halophytic taxa. The high fertility and low sterility of pollens confirmed that the selected halophytes are well‐established in the salt region. The findings highlight the taxonomic significance of pollen morphology in correct identification and differentiation of salt tolerant plant species.     

Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 μm while the smallest in Parkinsonia aculeata 26.1 μm. The largest equatorial diameter was found in C. pulcherrima of 70.25 μm whereas the smallest in P. aculeata 27.57 μm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.     

Microscopic investigation of pollen morphology of Brassicaceae from Central Punjab‐Pakistan

The intention of the current study is to provide an account on the palynological features of Brassicaceae from Central Punjab‐Pakistan as a basis for future studies. Different morpho‐palynological characteristics both qualitative and quantitative were analyzed during this research which includes shape of pollen, diameter of pollen, P/E ratio, exine sculpturing, thickness of exine, type of pollen, shape and size of lumens, and thickness of murus. Taxonomic keys were also constructed based on pollen morphological characters for correct identification of species. This study aims to provide detailed information of pollen diversity and their exine structure based on both qualitative and quantitative characters by using Light microscopy and Scanning electron microscopy. Shape of pollen is mostly prolate, but some species also have sub‐prolate to spheroidal prolate types. Exine ornamentation in most species was reticulate, whereas micro reticulate (one species) and coarsely reticulate (one species) exine also observed in some pollen. All the pollen mentioned in this study have tricolpate apertures. Variation found in thickness of exine and other characters proved to be helpful at generic and specific level. The results reinforced the significance of pollen morphological features of family Brassicaceae and aid for valuable taxonomic tool in plant systematics.     

Palyno‐anatomical studies of monocot taxa and its taxonomic implications using light and scanning electron microscopy

Palyno‐anatomical study of monocots taxa using Light and Scanning Electron Microscopy (SEM) was first time conducted with a view to evaluating their taxonomic significance. Studied plants were collected from different eco‐climatic zones of Pakistan ranges from tropical, sub‐tropical, and moist habitats. The aim of this study is to use palyno‐anatomical features for the correct identification, systematic comparison, and investigation to elucidate the taxonomic significance of these features, which are useful to taxonomists for identifying monocot taxa. A signification variation was observed in quantitative and qualitative characters by using the standard protocol of light microscopy (LM) and SEM. Epidermal cell length varied from maximum in Allium griffthianum (480 ± 35.9) μm at the adaxial surface to minimum in Canna indica (33.6 ± 8.53) μm on abaxial surface. Maximum exine thickness was observed in Canna indica (4.46) μm and minimum in Allium grifthianum (0.8) μm. Variation was observed in shape and exine ornamentation of the pollen, shape of the epidermal cell, number, size, and type of stomata, guard cell shape, and anticlinal wall pattern. Based on these palyno‐anatomical features a taxonomic key was developed, which help in the discrimination of studied taxa. In conclusion, LM and SEM pollen and epidermal morphology is explanatory, significant, and can be of special interest for the plant taxonomist in the correct identification of monocots taxa.     

Pollen morphological investigations of family Cactaceae and its taxonomic implication by light microscopy and scanning electron microscopy

The family Cactaceae is the diversified group of angiosperm plants whose pollen statistics has been used for taxonomic identification. In this article, we present the pollen morphology of eight species belong to seven taxonomically complex genera of Cactaceae including Astrophytum, Cylindropuntia, Echinocereus, Echinopsis, Mammillaria, Opuntia, and Thelocactus using light and scanning electron microscopy. The pollen grains were acetolyzed, measured, described, and electron photomicrographs were taken. Cactaceae can be characterized by presenting different palynomorphological features including pollen type, sculpturing, polar and equatorial diameter, aperture orientation, exine thickness, P/E ratio, and echini features. Four types of pollen shapes, that is, prolate spheroidal (three species), subprolate (two species), prolate (two species), and oblate spheroidal in Echinocereus reichenbachii were observed. The polar and equatorial diameter observed maximum in O. ficus indica 116.95 and 112.27 μm while minimum in M. compressa 38.42 and 21.05 μm. Pollen of two types, tricolpate in members of subfamily Cactioideae and pantoporate in the Opuntioideae were examined. The fertility percentage has been observed maximum in Opuntia macrocentra (83.84%) and minimum in Opuntia ficus‐indica (57.89%). Exine sculpturing showing great variations such as granulate, reticulate, granulate perforate and micro‐echinate foveolate ornamentation was examined only in Echinopsis eyriesii. A key to species, based on pollen micromorphological attributes, has been constructed for correct identification of complex cactus species.     

Palyno-anatomical characters and their systematic significance in the family Apiaceae from Chitral,eastern Hindu Kush,Pakistan

The present study was performed to provide a detailed explanation of leaf epidermal anatomy and pollen micromorphological features of selected species of family Apiaceae from Chitral, eastern Hindu Kush region as the basis of forthcoming studies. In the present article pollen morphology of eight species and foliar epidermal of seven species of family Apiaceae have been examined through microscopic techniques. In results two types of pollen prolate (five species) and perprolate (three species) with three colpi have been recorded. The exine ornamentation was found to be regulate, striate, and cerebroid. Largest pollen was found in Heracleum leucocarpum with the polar diameter of 43.25 μm and equatorial diameter of 21.6 μm. Smallest pollen was observed in Elaeosticta chitralica with the polar diameter of 18.4 μm. The P/E ratio varied from 1.59 to 2.16. Regarding to foliar epidermal anatomy, three types of epidermal cells including rectangular, irregular, and polygonal with variation in anticlinal wall pattern were determined. In the selected species three kinds of stomata comprising anisocytic, anomocytic, and paracytic type were reported in the current research. The size of epidermal cells ranged from 106 × 42.50 μm in Bupleurum falcatum subsp. cernuum and 77.25 × 26.35 μm in Prangos pabularia in adaxial surface. Largest stomatal complex was found in Prangos pabularia both in adaxial 33.55 × 20.05 μm and abaxial 50.25 × 39.40 μm. All the observed quantitative and qualitative features of the species were proved to be useful in the delimitation of species at generic and species level.     

Comparative foliar anatomical and pollen morphological studies of Acanthaceae using light microscope and scanning electron microscope for effective microteaching in community

In this study, foliar anatomy and pollen morphology of 10 species of Acanthaceae has been investigated using light and scanning electron microscopy. The study was aimed to highlight the role of microscopy in microteaching at community for proper characterization of plants using palyno‐anatomical characters including pollen type, exine sculpturing, shape of epidermal cells, pattern of anticlinal wall, type and size of stomata, and trichome. Most of the species have polygonal cell shapes but some species have irregular, tetragonal, and pentagonal shape of epidermal cells. The largest epidermal cell length on adaxial and abaxial surface were observed in Asystasia gangetica 66.95 and 87.40 μm whereas least was observed on adaxial surface in Justicia adhatoda 36.9 μm and on abaxial surface in Barleria cristata 35.65 μm. In anatomy, species have diacytic type of stomata, whereas stomata of paracytic type observed in two species, while in A. gangetica cyclocytic type of stomata are present. Quantitively on abaxial surface, largest stomata length 29.9 μm and width 24.30 μm was noted in B. cristata. While shortest stomata length was observed in Ruellia prostrata 25.95 μm whereas minimum width of stomata was examined in Barleria acanthoides 2.05 μm. The diversity of trichomes are present in all species except in Ruellia brittoniana. Acanthaceae can be characterized by exhibiting different pollen morphology having five types of pollen shapes, prolate, spheroidal, perprolate, subprolate, and oblate spheroidal. Exine peculiarities showing variations such as reticulate, granulate, coarsely reticulate, lophoreticulate, perforate tectate, and granulate surface were examined.