Microencapsulation by Emulsion Non-Solvent Additicin Method

Abstract

Cellulose acetate butyrate microcapsules containing propranolol were prepared by emulsion non-solvent addition method. The effects on drug release of different polyethylene glycols (PEG), various concentrations of PEG 4000, and particle size of the drug to be encapsulated were investigated. In vitro dissolution of microcapsules in simulated intestinal fluid and buffers at different pH was also studied. PEGs were found to increase drug release for this system. The pH dissolution profiles of the microcapsules indicated that dissolution was slightly pH dependent during the first 8 hours of dissolution.     

Preparation and characterization of novel sinomenine microcapsules for oral controlled drug delivery

Background: Developing a sustained release drug to cure arthritis is needed. Sinomenine (SIN) is abstracted from sinomenium acutum and widely used in the treatment of various rheumatism and arrhythmia with few side effects. The primary aim of this study is to develop SIN microcapsules with polyelectrolyte multilayers for controlled drug release. Method: SIN microcrystals were encapsulated with chitosan, gelatin, and alginate by layer-by-layer technique, such as (gelatin/alginate)₄ and (chitosan/alginate)₆. The size distribution, zeta-potential, stability, and morphology of the microcapsules were characterized by a particle size analyzer, zetasizer, ultraviolet spectroscopy, and transmission electron microscope, respectively. The in vitro controlled release pattern of SIN was studied using a diffusion cell assembly at physiological pH of 6.8 or 1.4. Results: Light stability of these microcapsules was improved after microencapsulation. Compared with release rate of the SIN microcapsules coated by the poly(dimethyldiallyl ammonium chloride)/alginate and gelatin/alginate multilayers, release rate of the SIN microcapsules coated with chitosan/alginate multilayers was fast. Release rate progressively decreased with the increase of chitosan/alginate bilayer number and the decrease of pH value of release medium. Conclusion: These novel SIN microcapsules may be developed into oral controlled drug delivery for rheumatism and arthritis.     

Gd2O3:Eu@mesoporous SiO2 bifunctional core-shell composites: Fluorescence label and drug release

A novel kind of core-shell nanocomposite Gd₂O₃:Eu³⁺@mesoporous SiO₂ was successfully fabricated, which consisted of a solvothermal synthesized Gd₂O₃:Eu³⁺ nanospheres core, a thin nonporous silica midterm layer and an ordered mesoporous silica shell. The XRD, SEM, TEM, FTIR, N₂ adsorption/desorption and PL spectra were employed to characterize the composites. The cytotoxicity of Gd₂O₃:Eu³⁺@mesoporous SiO₂ and Gd₂O₃:Eu³⁺ was assessed by the standard MTT assay. The composites had spherically monodisperse morphology and a narrow size distribution around 180 nm in diameter. Furthermore, they also demonstrated the strong photoluminescence of ⁵D₀-⁷F_J emissions. In addition, the composites exhibited good property of sustained drug release by using ibuprofen (IBU) as model drug in the drug delivery process. Therefore, the drug release process could be easily tracked and identified through photoluminescence. Overall, the present composites have potential significant biomedical application as ideal bifunctional materials.     

A novel method to low temperature synthesis of nanocrystalline forsterite

Nanocrystalline forsterite (Mg₂SiO₄) powder was synthesized using sucrose as a chelating agent and template material from an aqueous solution of magnesium nitrate and colloidal silica. The synthesized powders were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), simultaneous thermal analysis (STA), and scanning electron microscopy (SEM). The synthesized nano-powder had particle size smaller than 200 nm and average crystallite size of powders calcined at 800 °C for 3 h was in the range of 10-30 nm. Also the effect of addition 2 and 4 wt.% forsterite seed on nucleation temperature and crystallite size of forsterite was investigated. The presence of small amounts of Mg₂SiO₄ as seed obviously accelerated the crystallization of forsterite. According to DTA results the inceptive formation temperature of Mg₂SiO₄ without any seed was 760 °C, while this temperature for the specimen containing 4 wt.% seed was 700 °C.     

Silica-[Fe(bpy)3] composite particles with photo-responsive change of color and magnetic property

Photo-induced complex formation of tris-2,2′-bipyridine iron(II) complex ([Fe(bpy)₃]²⁺) from the mixture of FeCl₃ and 2,2′-bipyridine was achieved in silica gel containing 150-300 μm silica particles, derived from a complex emulsion with HCl aqueous solution and tetraethyl orthosilicate (TEOS). More than 95% of Fe(III) and 2,2′-bipyridine were incorporated in silica particles. Yellow-red color change, due to [Fe(bpy)₃]²⁺, was observed by irradiation with 365 nm UV beam at 0.3 mW cm⁻² for 120 s. The complex formation accompanies simultaneous spin transition from the high-spin state of Fe(III) to the low-spin state of Fe(II).     

Reversible transformations of silver oxide and metallic silver nanoparticles inside SiO2 films

Reversible transformation of silver oxide and metallic nanoparticles inside a relatively porous silica film has been established. Annealing of Ag-doped films in oxidizing (air) atmosphere at 450 °C yielded colorless films containing AgO_x. These films were turned yellow when heated in H₂-N₂ (reducing atmosphere) due to the formation of Ag nanoparticles. This yellow coloration (due to nano Ag⁰) and bleaching (conversion of Ag⁰ → Ag⁺) are reversible. Optical and photoluminescence spectra are well consistent with this coloration and bleaching. The soaking test of the air-annealed film in Na₂S₂O₃ solution supports the presence of Ag⁺. Grazing incidence X-ray diffraction and transmission electron microscopy studies reveal the formation of Ag-oxides and Ag nanoparticles in the oxidized and reduced films, respectively.     

Synthesis and photoluminescence properties of SrLu2O4:Eu superfine phosphor

Superfine powder SrLu₂O₄:Eu³⁺ was synthesized with a precursor prepared by an EDTA - sol-gel method at relatively low temperature using metal nitrate and EDTA as starting materials. The heat decomposition mechanism of the precursor, formation process of SrLu₂O₄:Eu³⁺and the properties of the particles were investigated by thermo-gravimetric (TG) - differential thermal analysis (DTA), X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence (PL) analyses. The results show that pure SrLu₂O₄:Eu³⁺ superfine powder has been produced after the precursor was calcinated at 900 °C for 2 h and has an elliptical shape and an average diameter of 80-100 nm. Upon excitation with 250 nm light, all the SrLu₂O₄:Eu³⁺ powders show red and orange emissions due to the 4f-4f transitions of Eu³⁺ ions. The highest photoluminescence intensity at 610 nm was found at a content of about 6 mol% Eu³⁺. Splitting of the ⁵D₀-⁷F₁ emission transition revealed that the Eu³⁺ ions occupied two nonequivalent sites in the crystallite by substituting Lu³⁺ ions.     

Design and characterization of enteric-coated controlled release mucoadhesive microcapsules of Rabeprazole sodium

The objectives of present work was to design and characterize the rabeprazole sodium loaded microcapsules prepared by solvent evaporation technique using ethyl cellulose (EC) based various mucoadhesive polymer, followed by a triple coating with Eudragit L100. The Box-behnken design (BBD) was applied for optimization of formulations containing EC, HPMCK100M and Eudragit L100 as factors for selected responses like entrapment efficiency, mucoadhesive property and drug release in 24 h. The prepared microcapsules were characterized for particle size, drug content, swelling index, mucoadhesive strength, and in vivo antiulcer activity. FT-IR studies revealed that there was no drug-polymer interaction. SEM studies revealed that microcapsules were non-aggregated, spherical shape and smooth appearance. In vitro drug release data from microcapsules was fitted to different kinetic models to explain release profiles. The correlation coefficient value (r²) indicated that the drug release followed Higuchi model. Analysis of variance (ANOVA) showed significant difference in the release of drug from all formulations at p < 0.05 level. Accelerated stability study of optimized formulation (F4) upto 6 months showed there was no change in drug content and release characteristics during storage. In vivo antiulcer activity showed that the optimized microcapsules were able to protect rat stomach against ulcer formation vis-à-vis aqueous solution of the drug showed only negligible and minimum effect.     

Facile fabrication of SiO2/Al2O3 composite microspheres with a simple electrostatic attraction strategy

SiO₂/Al₂O₃ composite microspheres with SiO₂ core/Al₂O₃ shell structure and high surface area were prepared by depositing Al₂O₃ colloid particles on the surface of monodispersed microporous silica microspheres using a simple electrostatic attraction and heterogeneous nucleation strategy, and then calcined at 600 °C for 4 h. The prepared products were characterized with differential thermal analysis and thermogravimetric analysis (DTA/TG), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption and X-ray photoelectron spectroscopy (XPS). It was found that uniform alumina coating could be deposited on the surface of silica microspheres by adjusting the pH values of the reaction solution to an optimal pH value of about 6.0. The specific surface area and pore volume of the SiO₂/Al₂O₃ composite microspheres calcined at 600 °C were 653 m² g⁻¹ and 0.34 ml g⁻¹, respectively.     

Magnetic properties of NiCuZn ferrite nanoparticles synthesized using egg-white

A new process to prepare single-phase nano-sized ferrites, Ni_0.8−xCu_0.2Zn_xFe₂O₄ with x = 0.1-0.7, was developed using egg-white precursors. TG measurement showed that, the precursors must be calcined at 550 °C. XRD patterns indicated the formation of single-phase cubic ferrites with particle size in the range 28.7-48.4 nm. TEM image gave particle size agrees well with that estimated using XRD. FT-IR spectroscopy showed the characteristic ferrite bands. Hysteresis loops measurements exhibited an increase in the saturation magnetization value (M_s) up to zinc content of 0.2 followed by unexpected decrease, which suggests the preference of Zn²⁺ ions to occupy octahedral sites. The decrease in the coercivity (H_c) with increasing zinc content is attributed to the lower magneto-crystalline anisotropy of Zn²⁺ ions compared to Ni²⁺ ions. Temperature dependence of the molar magnetic susceptibility (χ_M) suggested a ferrimagnetic behavior of the investigated samples and showed a decrease in the value of the Curie temperature (T_C) with increasing zinc.     

Factors Influencing the Release of Aminophylline from Tableted Ethylcellulose Microcapsules

Abstract

Microcapsules containing aminophylline cores in ethylcellulose walls have been prepared and tableted. The mechanical properties and the release characteristics of tablets obtained by direct compression at six different pressures (ranging from 265 to 1060 Kg.cm^?2) were studied. The release rate of the drug from tableted microcapsules increased with the increase of compression force and was higher than from uncompressed microcapsules, indicating that some damage of the polymeric wall occurred during the compression process. Among the various excipients tested as binding and protective agents, paraffined starch (a mixed system appositely set up) gave the best results, producing the slowest drug release rate. No important effect on drug release rate was found by changing the size of the microcapsules.     

Hydroxy propyl cellulose capped silver nanoparticles produced by simple dialysis process

Silver (Ag) nanoparticles (∼6 nm) were synthesized using a novel dialysis process. Silver nitrate was used as a starting precursor, ethylene glycol as solvent and hydroxy propyl cellulose (HPC) introduced as a capping agent. Different batches of reaction mixtures were prepared with different concentrations of silver nitrate (AgNO₃). After the reduction and aging, these solutions were subjected to ultra-violet visible spectroscopy (UVS). Optimized solution, containing 250 mg AgNO₃ revealed strong plasmon resonance peak at ∼410 nm in the spectrum indicating good colloidal state of Ag nanoparticles in the diluted solution. The optimized solution was subjected to dialysis process to remove any unreacted solvent. UVS of the optimized solution after dialysis showed the plasmon resonance peak shifting to ∼440 nm indicating the reduction of Ag ions into zero-valent Ag. This solution was dried at 80 °C and the resultant HPC capped Ag (HPC/Ag) nanoparticles were studied using transmission electron microscopy (TEM) for their particle size and morphology. The particle size distribution (PSD) analysis of these nanoparticles showed skewed distribution plot with particle size ranging from 3 to 18 nm. The nanoparticles were characterized for phase composition using X-ray diffractrometry (XRD) and Fourier transform infrared spectroscopy (FT-IR).     

Ultrafine magnetic particles dispersed in silica: Characterization of cobalt iron citrate precursor and magnetic properties

Ultrafine magnetic particles dispersed in a silica matrix were successfully obtained by treatment of a cross-linked cobalt iron citrate precursor, synthesized by a modified Pechini route, with 0.001 M K₂Cr₂O₇ at 130 °C. The IR and NMR spectroscopic characterization of the precursor gel containing Co²⁺ and Fe³⁺ shows that the citric acid reacts with the metallic ions by coordination, the ethylene glycol by esterification and the tetraethylorthosilicate by substitution. SQUID measurements of the composite indicate superparamagnetic behavior. The blocking temperature, from the peak of the zero-field-cooled measurements, was 3 K at 1000 Oe. The magnetic diameter calculated using Langevin's equation was 4 nm.     

Fluoride removal performance of glass derived hydroxyapatite

A novel sodium calcium borate glass derived hydroxyapatite (G-HAP) with different ranges of particle size was prepared by immersion sodium calcium borate glass in 0.1 M K₂HPO₄ solution by the ratio of 50 g L⁻¹ for 7 days. The unique advantage of G-HAP for the adsorption of fluoride ions in solutions was studied. The effects of size and quantity of particles, pH value and adsorption time on adsorption performance were investigated. The maximum adsorption capacity was 17.34 mg g⁻¹ if 5 g L⁻¹, <100 μm G-HAP was added to a solution with an initial pH value of 6.72 and the adsorption time was 12 h. The results showed that the micro-G-HAP could immobilize F⁻ in solution more effectively than commercial nano-HAP, which makes potential application of the G-HAP in removing the fluoride ions from wastewater. The adsorption kinetics and isotherms for F⁻ could be well fitted by a second order kinetic model and Freundlich isotherm model respectively, which could be used to describe the adsorption behavior. The mechanism of G-HAP in immobilizing F⁻ from aqueous solutions was investigated by the X-ray diffraction (XRD), infrared spectra (IR) and scanning electron microscopy (SEM).     

TG/DSC analysis of Fe8(OOH)16Cl1.3 nanospindles

The thermal analysis of Fe₈(OOH)₁₆Cl_1.3 (Akaganeite-M) nanospindles prepared by the hydrolysis of FeCl₃ solutions are determined by thermogravimetric analyses and differential scanning calorimetry (TG/DSC), in conjunction with field-emission scanning electron microscopy (FE-SEM), and X-ray diffraction (XRD). Different products are formed after Fe₈(OOH)₁₆Cl_1.3 nanospindles are calcined at different temperatures for 30 min in N₂ atmosphere: Fe_1.833(OH)_0.5O_2.5 and magnetite obtained at 250 °C; pure magnetite (Fe₃O₄) obtained at 630 °C; and magnetite containing some iron nitrides (Fe₂N and Fe₄N) obtained at 800 °C. The calcination of Fe₈(OOH)₁₆Cl_1.3 provides a new method to prepare pure magnetite.     

Physicochemical and catalytic properties of palladium supported on poly(o-methoxyaniline)

Palladium was introduced into a conjugated polymer poly(o-methoxyaniline) (POM) by reacting the powdered polymer with aqueous solution of PdCl₂ of low acidity (PdCl₂: 2.3 × 10⁻³ mol/dm³, HCl: 0.66 × 10⁻³ mol/dm³). Various Pd²⁺ complexes with Cl⁻, H₂O, OH⁻ ligands coexisted in this solution but predominated [PdCl₂(H₂O)₂] ones. Several techniques like X-ray powder diffraction, scanning electron microscopy, X-ray photoelectron and Raman spectroscopy, extended X-ray absorption fine structure have been used to characterize the poly(o-methoxyaniline)-Pd systems. In particular, the state of Pd species in the Pd/POM of various content of palladium (2-8 wt.% Pd) and chemical changes in the polymer matrix induced by insertion of palladium were studied. The protonation and redox reactions involved on palladium incorporation resulted in palladium ions and Pd metal in the final samples. Metallic Pd produced due to spontaneous reduction of palladium ions by the polymer formed large crystalline particles 200-1000 nm in size. The Pd²⁺ species in the form of anionic complexes like [PdCl₄]²⁻ acted as the counterions at low content of palladium (2-4 wt.% Pd). At high palladium content (8 wt.% Pd), several atoms like Cl, N and/or O were identified by extended X-ray absorption fine structure (EXAFS) technique in the nearest environment of Pd atoms. The structural groups of POM (like N groups and/or OCH₃) as well as H₂O, OH⁻ molecules are, therefore, considered as probable species in the coordination sphere of palladium. The catalytic properties were studied for the as-prepared Pd/POM and the samples additionally reduced with aqueous solution of NaH₂PO₂. They were used in the hydrogenation of CC bonds in maleic acid (MAC) and CO groups in 2-ethylanthraquinone (eAQ) at 60 °C and atmospheric pressure of hydrogen using xylene-octanol-2 or water medium. The correlation between Pd/POM activities and the content of Pd metal was found. Activation of the as-prepared Pd/POM with NaH₂PO₂ improved their catalytic properties. Much higher and much stable activities were then obtained in both MAC and eAQ hydrogenation reactions.     

Preparation and conductivity of solid high-proton conductor silica gel containing 80 wt.% decatungstodivanadogermanic acid

The silica gel containing decatungstodivanadogermanic heteropoly acid was prepared by means of the sol-gel method. Infrared spectrum and XRD pattern revealed that the Keggin structure characteristic of GeW₁₀V₂O₄₀⁶⁻ anion was present in the silica gel skeleton. The regularity of the change of the characteristic peaks in the infrared spectrum was investigated. The silica gel exhibited considerably high-proton conductivity. The proton conductivity of the gel containing 80 wt.% decatungstodivanadogermanic acid is 5.37 × 10^− 2 S cm^− 1 at room temperature (18 °C).     

pH-Controlled drug release from mesoporous silica tablets coated with hydroxypropyl methylcellulose phthalate

A simple pH-controlled drug release system was successfully prepared by coating pH-sensitive polymer hydroxypropyl methylcellulose phthalate (HPMCP) on drug-loaded mesoporous SBA-15 tablet. Using famotidine (Famo) as a model drug, the effects of coating times and drying temperature on drug release were studied in detail to optimize the drug release system. In simulated gastric fluid (SGF, pH 1.2), it took only 2 h for Famo to be completely released from mesoporous silica tablet without HPMCP coating. Also in SGF, with the increase of coating times and drying temperature, the release of Famo was greatly delayed by HPMCP coating. For the tablet with twice coating of HPMCP and dried at 80 °C, only 4.0 wt.% of Famo could be released within 4 h. However, in simulated intestinal fluid (SIF, pH 7.4), HPMCP coating did not show obvious effect on the release of Famo.     

Modification and optimization of nano-crystalline Al2O3 combustion synthesis using Taguchi L16 array

Nanocrystalline Al₂O₃ powders have been synthesized by combustion method using 8 new fuels. The effectiveness of important factors on the production of nanopowders was investigated and optimized using Taguchi L₁₆ array design. The products were characterized by XRD, BET, TGA, EDX, FESEM, and TEM analyses. Results demonstrated that the alumina nanoparticles had crystallite sizes between 8.31 nm and 13.54 nm. The optimized sample had the specific surface area of 72 m²/g and crystallite size of 7.25 nm. The synthesis of γ-alumina was modified in order to achieve higher specific surface area (122.63 m²/g). A nano-network of alumina powders woven by alumina nano-fibers has been fabricated successfully by modified combustion synthesis. The length and diameter of fibers were about 160 nm and 10 nm respectively.     

Preparation of high nickel-containing MCM-41-type mesoporous silica via a modified direct synthesis method

A method with modifying tetraethyl orthosilicate (TEOS) with nickel species has been developed for the synthesis of mesoporous silica with high nickel content (11.8 wt.% of Ni or even higher). With the method, MCM-41-type materials were obtained with high BET surface area reaching 868 m²/g and pore volume up to 0.73 cm³/g. The materials were characterized by means of X-ray powder diffraction, transmission electron microscopy, energy dispersive X-ray spectroscopy, N₂ adsorption, Fourier transform infrared and X-ray photoelectron spectroscopy. Nickel species were incorporated into the silica frameworks. The mesostructures still remain after activation using H₂ at 773 K.