Synthesis, characterization and optical properties of sheet-like ZnO

Sheet-like ZnO with regular hexagon shape and uniform diameter has been successfully synthesized through a two-step method without any metal catalyst. First, the sheet-like ZnO precursor was synthesized in a weak alkaline carbamide environment with stirring in a constant temperature water-bath by the homogeneous precipitation method, then sheet-like ZnO was obtained by calcining at 600 °C for 2 h. The structures and optical properties of sheet-like ZnO have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and UV-vis-NIR spectrophotometer. The results reveal that the product is highly crystalline with hexagonal wurtzite phase and has appearance of hexagon at (0 0 0 1) plane. The HRTEM images confirm that the individual sheet-like ZnO is single crystal. The PL spectrum exhibits a narrow ultraviolet emission at 397 nm and a broad visible emission centering at 502 nm. The band gap of sheet-like ZnO is about 3.15 eV.     

Study on field emission and photoluminescence properties of ZnO/graphene hybrids grown on Si substrates

Zinc oxide/graphene (ZnO/G) hybrids are prepared on n-Si (1 0 0) substrates by electrophoretic deposition and magnetron sputtering technique. The crystal structure, morphology and photoluminescence (PL) properties of the ZnO/G hybrids are analyzed via X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and fluorescence–phosphorescence spectrometer, respectively. The results indicate that the crystal quality of ZnO nanostructure deteriorates after depositing graphene buffer layer. Whereas many three dimensional stacking blowballs form in the ZnO/G hybrid, creating a larger surface area than that of ZnO nanostructure. The photoluminescence (PL) spectrum of the ZnO/G hybrid contains multi-peaks, which are consistent with ZnO nanostructure except for two new peaks at 390 and 618 nm. In addition, field emission measurement reveals that E_to and E_thr decrease from 8.01 V μm⁻¹ and 14.90 V μm⁻¹ of the ZnO nanostructure to 2.72 V μm⁻¹ and 7.70 V μm⁻¹ of the ZnO/G hybrid. ZnO/G hybrid is characteristic of having excellent emitting behavior suitable for application in field emission technology.     

Hydrothermal synthesis and luminescence properties of octahedral LiYbF4: Er microcrystals

LiYbF₄: Er³⁺ octahedral microcrystals have been successfully prepared through a facile hydrothermal method assisted with EDTA (ethylenediaminetetraacetic acid). X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric and differential scanning calorimeters (TG-DSC), photoluminescence (PL) spectra are used to characterize the samples. Under 976 nm excitation, the upconversion (UC) luminescence emission spectra of LiYbF₄: Er³⁺ microcrystals show the characteristic Er³⁺ emissions. The results show that the infrared light emissions at 792 nm of ⁴I_9/2 → ⁴I_15/2 are dominantly strong unusually, while the green emissions at 526 and 545 nm assigned to ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2, respectively, and the red emission at 667 nm of ⁴F_9/2→⁴I_15/2 are relatively weaker. Most importantly, the samples show more efficient luminescence with further heat treatment.     

Synthesis and characterization of photoluminescent cerium-doped yttrium aluminum garnet

Powder phosphor yttrium aluminum garnet (YAG), doped with trivalent cerium (Ce³⁺) is synthesized by sol-gel method. The formation of YAG and YAG:Ce (cerium-doped yttrium aluminum garnet) was investigated by means of X-ray diffraction (XRD). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were also used. The purified crystalline phases of YAG and YAG:Ce were obtained at 1000 °C. The maximum average grain size is about 20-23 nm for undoped samples and 28-34 nm for doped samples. The crystalline YAG:Ce emission shows one peak in the range 480-535 nm with the maximum near 520 nm. Photoluminescence (PL) intensity of 5d → 4f transition of Ce³⁺ increased with increasing annealing temperature. With increasing the concentration of Ce³⁺, the photoluminescence peak shifts towards the red region.     

Synthesis and photoluminescence properties of aligned Zn2GeO4 coated ZnO nanorods and Ge doped ZnO nanocombs

Aligned Zn₂GeO₄ coated ZnO nanorods and Ge doped ZnO nanocombs were synthesized on a silicon substrate by a simple thermal evaporation method. The structure and morphology of the as-synthesized nanostructure were characterized using scanning electron microscopy and transmission electron microscopy. The growth of aligned Zn₂GeO₄ coated ZnO nanorods and Ge doped ZnO nanocombs follows a vapor-solid (VS) process. Photoluminescence properties were also investigated at room temperature. The photoluminescence spectrum reveals the nanostructures have a sharp ultraviolet luminescence peak centered at 382 nm and a broad green luminescence peak centered at about 494 nm.     

Photoluminescence, thermally stimulated luminescence and electron paramagnetic resonance investigations of Tb doped SrBPO5

Trap level spectroscopic studies were carried out on γ-irradiated Tb (1 mole%) doped SrBPO₅ were carried out using photoluminescence (PL), thermally stimulated luminescence (TSL) and electron paramagnetic resonance (EPR) techniques. The incorporation of Tb in the 3+ oxidation state was ascertained from PL studies. Life time for Tb³⁺ emission corresponding to the intense transition ⁵D₄ → ⁷F₅ at 543 nm was determined. The spectral characteristics of the TSL glows have shown that Tb³⁺ ions act as the emission center for the glow peak at 475 K. The trap parameters of the glow peak were determined. EPR investigations at room temperature/77 K revealed the stabilization of three boron oxygen hole trapped centers (BOHC's) and oxygen centered radicals such as O⁻ and O₂⁻ and trapped electrons in room temperature γ-irradiated samples. TSL glow peak at 475 K was found to be associated with recombination of electron released from trapped electron center and the BOHC₂ center.     

The synthesis and optical property of solid-state-prepared YAG:Ce phosphor by a spray-drying method

Ce³⁺-activated yttrium aluminum garnet (Y₃Al₅O₁₂:Ce, YAG:Ce) powder as luminescent phosphor was synthesized by the solid-state reaction method. The phase identification, microstructure and photoluminescent properties of the products were investigated by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), absorption spectrum and photoluminescence (PL) analysis. Spherical phosphor particle is considered better than irregular-shaped particle to improve PL property and application, so this phosphor was granulated into a sphere-like shape by a spray-drying device. After calcinating at 1500 °C for 0, 4, and 8 h, the product was identified as YAG and CeO₂ phases. The CeO₂ phase content is decreased by increasing the calcination time or decreasing the Ce³⁺ doping content. The product showed higher emission intensity resulted from more Ce³⁺ content and larger grain size. The product with CeO₂ was found to have lower emission intensity. This paper presents the crystal structures of Rietveld refinement results of powder XRD data.     

Photoluminescence characteristics of ZnO clusters confined in the micropores of zeolite L

Sub-nanometric ZnO clusters were prepared in the micropores of zeolite L by the incipient wetness impregnation method. The X-ray patterns (XRD), transmission electron microscope (TEM), N₂ adsorption-desorption isotherms, UV-vis absorption spectra (UV-vis) and photoluminescence spectra (PL) were used to characterize the composite materials. The results indicate that a small amount of sub-nanometric ZnO clusters can be introduced into the channel of zeolite L, however, when the amount of ZnO loading exceeds 20 wt%, macrocrystalline ZnO appears on the external surface of zeolite L. Different from bulk ZnO materials, these sub-nanometric ZnO clusters exhibit their absorption onset below 255 nm and a blue luminescence band in the range of 404-422 nm. The temperature-dependent luminescence demonstrates that the amount of the ZnO loading significantly affects the exciton-phonon interaction between the ZnO clusters and the zeolite host. The ZnO clusters exhibit a picosecond scale emission lifetime at room temperature.     

Synthesis and photoluminescence properties of SrLu2O4:Eu superfine phosphor

Superfine powder SrLu₂O₄:Eu³⁺ was synthesized with a precursor prepared by an EDTA - sol-gel method at relatively low temperature using metal nitrate and EDTA as starting materials. The heat decomposition mechanism of the precursor, formation process of SrLu₂O₄:Eu³⁺and the properties of the particles were investigated by thermo-gravimetric (TG) - differential thermal analysis (DTA), X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence (PL) analyses. The results show that pure SrLu₂O₄:Eu³⁺ superfine powder has been produced after the precursor was calcinated at 900 °C for 2 h and has an elliptical shape and an average diameter of 80-100 nm. Upon excitation with 250 nm light, all the SrLu₂O₄:Eu³⁺ powders show red and orange emissions due to the 4f-4f transitions of Eu³⁺ ions. The highest photoluminescence intensity at 610 nm was found at a content of about 6 mol% Eu³⁺. Splitting of the ⁵D₀-⁷F₁ emission transition revealed that the Eu³⁺ ions occupied two nonequivalent sites in the crystallite by substituting Lu³⁺ ions.     

Ni-doped vertically aligned zinc oxide nanorods prepared by hybrid wet chemical route

Ni-doped zinc oxide (Ni:ZnO) nanorods were synthesized by incorporating nickel in vertically aligned ZnO nanorods. Ni was evaporated onto ZnO nanorods and the composite structure was subjected to rapid thermal annealing for dispersing Ni in ZnO nanorods. The optical band gap decreased with increasing amount of Ni incorporation. The origin of the photoluminescence peak at ∼ 400 nm was related to the defect levels introduced due to substitution of Ni²⁺ in the Zn²⁺ site with annealing. The Raman spectra indicated the presence of the characteristic peak at ∼ 436 cm^− 1 which was identified as high frequency branch of E₂ mode of ZnO. The Fourier Transformed Infrared spectra indicated the existence of the distinct characteristic absorption peak at 481 cm^− 1 for ZnO stretching modes. Current-voltage characteristics indicated that the current changed linearly with voltage for both the doped and undoped samples.     

Vertically aligned Mn-doped zinc oxide nanorods by hybrid wet chemical route

Mn-doped zinc oxide (Mn:ZnO) nanorods were synthesized by incorporating manganese in aligned ZnO nanorods. For this, Mn was evaporated onto ZnO nanorods and the composite structure was subjected to rapid thermal annealing. The nanorods were preferentially oriented in (0 0 2) direction as indicated by the XRD measurement. Optical band gap was seen to decrease with increasing amount of Mn incorporation. XPS studies indicated that incorporated Mn was in Mn²⁺ and Mn⁴⁺ states. Mn²⁺ atomic concentration was found to be larger than Mn⁴⁺ concentration in all the samples. The Raman spectra of the Mn:ZnO nanorods indicated the presence of the characteristic peak at ∼438 cm⁻¹ for high frequency branch of E₂ mode of ZnO. The PL peak at ∼376 nm (∼3.29 eV) was ascribed to the band edge luminescence while the peak at ∼394 nm (∼3.15 eV) was assigned to the donor bound exciton (D^oX) and free exciton transition related to Mn²⁺ states.     

Synthesis, characterization and effect of low energy Ar ion irradiation on gadolinium oxide nanoparticles

In this work, we report on the surfactant assisted synthesis of gadolinium oxide (Gd₂O₃) nanoparticles and their characterization through various microscopic and spectroscopic tools. Exhibiting a monoclinic phase, the nanoscale Gd₂O₃ particles are believed to be comprising of crystallites with an average size of ∼3.2 nm, as revealed from the X-ray diffraction analysis. The transmission electron microscopy has predicted a particle size of ∼9 nm and an interplanar spacing of ∼0.28 nm. Fourier transform infrared spectroscopy studies show that Gd-O inplane vibrations at 536.8 and 413.3 cm⁻¹ were more prominent for 80-keV Ar-ion irradiated Gd₂O₃ nanosystem than unirradiated system. The photoluminescence (PL) spectra of irradiated specimen have revealed an improvement in the symmetry factor owing to significant enhancement of surface-trap emission, compared to the band-edge counterpart. Irradiation induced creation of point defects (oxygen vacancies) were predicted both from PL and electron paramagnetic resonance (EPR) studies. Further, the Raman spectra of the irradiated sample have exhibited notable vibrational features along with the evolution of a new peak at ∼202 cm⁻¹. This can be ascribed to an additional Raman active vibrational response owing to considerable modification of the nanostructure surface as a result of ion bombardment. Probing nanoscale defects through prime spectroscopy tools would find a new avenue for precise tuning of physical properties with generation and annihilation of defects.     

Synthesis and characterization of ZnO nanowires for nanosensor applications

In this paper we report the synthesis of ZnO nanowires via chemical vapor deposition (CVD) at 650 °C. It will be shown that these nanowires are suitable for sensing applications. ZnO nanowires were grown with diameters ranging from 50 to 200 nm depending on the substrate position in a CVD synthesis reactor and the growth regimes. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), and Raman spectroscopy (RS) have been used to characterize the ZnO nanowires. To investigate the suitability of the CVD synthesized ZnO nanowires for gas sensing applications, a single ZnO nanowire device (50 nm in diameter) was fabricated using a focused ion beam (FIB). The response to H₂ of a gas nanosensor based on an individual ZnO nanowire is also reported.     

Thermal evaporation and condensation synthesis of metallic Zn layered polyhedral microparticles

Metallic zinc layered polyhedral microparticles have been fabricated by thermal evaporation and condensation technique using zinc as precursor at 750 °C for 120 min and NH₃ as a carrier gas. The zinc polyhedral microparticles with oblate spherical shape are observed to be 2-9 μm in diameter along major axes and 1-7 μm in thickness along minor axes. The structural, compositional and morphological characterizations were performed by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). A vapour-solid (VS) mechanism based growth model has been proposed for the formation of Zn microparticles. Room temperature photoluminescence (PL) emission spectrum of the product exhibited a strong emission band at 369 nm attributed to the radiative recombination of electrons in the s, p conduction band near Fermi surface and the holes in the d bands generated by the optical excitation.     

Effect of Ce doping and calcination on the photoluminescence of ZrO2 (3% Y2O3) fibers

Ce³⁺-doped ZrO₂ fibers were prepared by spinning method. X-ray powder diffraction (XRPD) shows the formation of only tetragonal phase with different concentrations of Ce³⁺-doped ZrO₂ fibers. The surface of the fibers is smooth and of uniform diameter by scanning electron microscopy (SEM). The photoluminescence (PL) results show typical emission bands centered at 470 and 530 nm; concentration quenching of the luminescence occurs as the molar ratio of Ce³⁺ ions exceeds an optimum value of 5%. No thermal quenching was observed, which was attributed to improved crystallinity of the host lattice, due to the increased calcining temperature.     

Synthetics of ZnO nanostructures by thermal oxidation in water vapor containing environments

Metallic Zn films deposited on glass were wet or dry oxidized at 390 °C in pure N₂ or O₂ to understand the effects of water vapor in different oxygen partial pressure on growth of ZnO nanostructure during thermal oxidation. As-prepared ZnO oxides were characterized by a scanning electron microscope (SEM), an X-ray diffractometer (XRD), and a transmission electron microscope (TEM). Optical and electric properties of these ZnO films were characterized by photoluminescence (PL) and resistance measurements, respectively. It was found that the oxygen partial pressure and water vapor of environment significantly affect the morphologies of ZnO nanostructures. Decreasing oxygen partial pressure in dry oxidation can enhance a green light peak at 500 nm on PL spectra arising from defect-related emission and reduce the resistivity of the oxide films. High H₂O^(g)/O₂ ratio in wet oxidation will significantly increase the intensity of a green light peak and reduce the resistivity of the oxide films. The effect of oxygen partial pressure and H₂O^(g)/O₂ ratio on the PL spectra and resistivity of ZnO films are explained by the theory of defects equilibrium during oxidation.     

Hydrothermal synthesis and luminescent properties of Y2O3:Tb and Gd2O3:Tb microrods

One-dimensional (1D) Y₂O₃:Tb³⁺ and Gd₂O₃:Tb³⁺ microrods have been successfully prepared through a large-scale and facile hydrothermal method followed by a subsequent calcination process in N₂/H₂ mixed atmosphere. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (IR), thermogravimetric analysis (TGA), energy-dispersive X-ray spectra (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-formed products via the hydrothermal process could transform to cubic Y₂O₃:Tb³⁺ and Gd₂O₃:Tb³⁺ with the same morphology and slight shrinking in size after a postannealing process. Both Y₂O₃:Tb³⁺ and Gd₂O₃:Tb³⁺ microrods exhibit strong green emission corresponding to ⁵D₄ → ⁷F₅ transition (542 nm) of Tb³⁺ under UV light excitation (307 and 258 nm, respectively), and low-voltage electron beam excitation (1.5 → 3.5 kV), which have potential applications in fluorescent lamps and field emission displays.     

Hydrothermal synthesis and photoluminescence of SrWO4:Tb novel green phosphor

Tb³⁺-doped SrWO₄ phosphors with a scheelite structure have been prepared by hydrothermal reaction. X-ray powder diffraction, field-emission scanning electron microscopy, photoluminescence excitation and emission spectra and decay curve were used to characterize the resulting samples. Scanning electron microscopy image showed that the obtained SrWO₄:Tb³⁺ phosphors appeared to be nearly spherical and their sizes ranged from 1 to 3 μm. Photoluminescence spectra indicated the phosphors emitted strong green light centered at 545 nm under ultraviolet light excitation. Because 12 at.% SWO₄:Tb³⁺ phosphor exhibits intensive green emission under 254 nm excitation in comparison with the commercial green fluorescent lamp phosphor (LaPO₄:Ce,Tb), the excellent luminescence properties make it a new promising green phosphor for fluorescent lamps application.     

Influence of fuels on the morphology of undoped Y3Al5O12 and photoluminescence of Y3Al5O12:Eu prepared by a combustion method

Undoped and Eu-doped yttrium aluminum garnet nano-powders were prepared by a facile combustion method with citric acid/ethylene diamine tetraacetic acid (EDTA) as fuels and nitrates as oxidizers. The precursors and powders calcined at 1030 °C were investigated using thermogravimetric (TG), differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscope (SEM), and Brunauer-Emmett-Teller (BET) surface area measurements. It was found that the powders could be indexed with a garnet structure. The grains were in shape of hemispherical with sizes between 60 nm and 100 nm. With decreasing the citric acid/EDTA ratio, the crystallite size decreased steadily and the specific surface area increased. Investigations of photoluminescence (PL) revealed that as-synthesized YAG:Eu³⁺ phosphor samples exhibited an orange emission band with a main peak at 591 nm under the excitation of 394 nm. As citric acid amounts increased, the quality of crystallinity became higher and the luminescent properties were monotonously enhanced.     

Vapor phase growth and optical properties of single-crystalline SnO2 nanobelts

Mass production of single-crystalline SnO₂ nanobelts was successfully achieved through a thermal evaporation of metallic Sn powders at 900 °C. The as-prepared SnO₂ nanobelts were typically 30-200 nm in width, 10-50 nm in thickness, and about tens of micrometers in length. In addition to the classical Raman models, two new Raman bands at 498 and 698 cm⁻¹ are observed for rutile-phased SnO₂ nanobelts, which can be attributed to the IR-active A_2u TO and A_2u LO modes, respectively. Photoluminescence (PL) spectrum of SnO₂ nanobelts featured an emission band at 615 nm (with a small shoulder at 585 nm), which might correspond to the existence of oxygen deficiencies in the produced belts. The formation of SnO₂ nanobelts followed a vapor-solid (VS) growth mechanism.