Synthesis and photoluminescence properties of aligned Zn2GeO4 coated ZnO nanorods and Ge doped ZnO nanocombs

Aligned Zn₂GeO₄ coated ZnO nanorods and Ge doped ZnO nanocombs were synthesized on a silicon substrate by a simple thermal evaporation method. The structure and morphology of the as-synthesized nanostructure were characterized using scanning electron microscopy and transmission electron microscopy. The growth of aligned Zn₂GeO₄ coated ZnO nanorods and Ge doped ZnO nanocombs follows a vapor-solid (VS) process. Photoluminescence properties were also investigated at room temperature. The photoluminescence spectrum reveals the nanostructures have a sharp ultraviolet luminescence peak centered at 382 nm and a broad green luminescence peak centered at about 494 nm.     

Synthesis, characterization and optical properties of sheet-like ZnO

Sheet-like ZnO with regular hexagon shape and uniform diameter has been successfully synthesized through a two-step method without any metal catalyst. First, the sheet-like ZnO precursor was synthesized in a weak alkaline carbamide environment with stirring in a constant temperature water-bath by the homogeneous precipitation method, then sheet-like ZnO was obtained by calcining at 600 °C for 2 h. The structures and optical properties of sheet-like ZnO have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and UV-vis-NIR spectrophotometer. The results reveal that the product is highly crystalline with hexagonal wurtzite phase and has appearance of hexagon at (0 0 0 1) plane. The HRTEM images confirm that the individual sheet-like ZnO is single crystal. The PL spectrum exhibits a narrow ultraviolet emission at 397 nm and a broad visible emission centering at 502 nm. The band gap of sheet-like ZnO is about 3.15 eV.     

Fabrication and optical properties of needle-like ZnO array by a simple hydrothermal process

A simple low temperature hydrothermal process was employed to fabricate the needle-like ZnO array in the diluted butyl amine. The microstructure, morphology and the photoluminescence property of the as-prepared products were characterized by x-ray diffraction (XRD), transmission electron microscope (TEM), field emission environment scanning electron microscope (SEM) and photoluminescence spectrum (PL). The results show that the needle-like ZnO crystals are hexagonal wurtzite monocrystal with slender figure and smooth surface. A possible growth mechanism of the needle-like ZnO array related to the diluted butyl amine is proposed. The PL spectrum of the needle-like ZnO array shows a strong blue light emission at 437 nm and a relatively low ultraviolet emission at 377 nm.     

The characteristics of ZnO deposited on PPC plastic substrate

In this paper, we report the deposition of ZnO thin film on poly propylene carbonate (PPC) plastic substrate by sputtering technique. The structural, optical and electrical properties of the ZnO thin film were investigated. The ZnO thin film deposited on PPC plastic has a smooth surface morphology as revealed by scanning electron microscopy (SEM). X-ray diffraction (XRD) measurement shows that the ZnO thin film has preferential orientation along the c-axis with strong peak observed at 2θ? = 34.25^o, while the photoluminescence (PL) spectrum shows strong UV emission peak at 385 nm. Spectrophotometry measurements reveal that transmission values of the film are low at wavelength shorter than 380 nm. Current-voltage measurements show that the dark- and photocurrents were found to be 6.11 and 89.3 μA, respectively, under dark and illuminated conditions at 5 V.     

Synthesis of ZnO flowers and their photoluminescence properties

Flower-like ZnO nano/microstructures have been synthesized by thermal treatment of Zn(NH₃)₄²⁺ precursor in aqueous solvent, using ammonia as the structure directing agent. A number of techniques, including X-ray diffraction (XRD), field emission scan electron microscopy (FESEM), transmission electron microscopy (TEM), thermal analysis, and photoluminescence (PL) were used to characterize the obtained ZnO structures. The photoluminescence (PL) measurements indicated that the as-synthesized ZnO structures showed UV (∼375 nm), blue (∼465 nm), and yellow (∼585 nm) emission bands when they were excited by a He-Gd laser using 320 nm as the excitation source. Furthermore, it has been interestingly found that the intensity of light emission at ∼585 nm remarkably decreased when the obtained ZnO nanocrystals were annealed at 600 °C for 3 h in air. The reason might be the possible oxygen vacancies and interstitials in the sample decreased at high temperature.     

Preparation and ethanol sensing properties of the superstructure SnO2/ZnO composite via alcohol-assisted hydrothermal route

Self-assembled superstructure of SnO₂/ZnO composite was synthesized by using alcohol-assisted hydrothermal method gas sensing properties of the material were investigated by using a static test system. The structure and morphology of the products were characterized by X-ray diffraction (XRD) and field-emission scanning electron microscope (FE-SEM). The diameter of the SnO₂ nanorods was about 40 nm with a length of about 300 nm, SnO₂ nanorods and ZnO nanosheets interconnect each other to form a superstructure. The gas sensing properties of superstructure SnO₂/ZnO composite with different content of ZnO were investigated. Furthermore, the superstructure SnO₂/ZnO composite sensor is characterized at different operating temperatures and its long-term stability in response to ethanol vapor is tested over a period of 3 months.     

Temperature-dependent controlled preparation of ZnO nanostructures and their photoluminescence properties

High purity and yield of ZnO nanobelts, nanocombs and nanowires have been synthesized using a simple catalyst-free vapor transport process and their growth mechanism and photoluminescence properties have been investigated. Transmission electron microscopy and selected-area electron diffraction analyses reveal that the intrinsic growth behaviors of ZnO vary with the growth temperature, leading to the formation of nanostructures with different morphologies. These ZnO nanostructures show a UV emission at about 385 nm and a broad green emission around 500 nm in their photoluminescence spectra, and the green to UV emission intensity ratio is determined by their microstructures.     

Photoluminescence characteristics of ZnO clusters confined in the micropores of zeolite L

Sub-nanometric ZnO clusters were prepared in the micropores of zeolite L by the incipient wetness impregnation method. The X-ray patterns (XRD), transmission electron microscope (TEM), N₂ adsorption-desorption isotherms, UV-vis absorption spectra (UV-vis) and photoluminescence spectra (PL) were used to characterize the composite materials. The results indicate that a small amount of sub-nanometric ZnO clusters can be introduced into the channel of zeolite L, however, when the amount of ZnO loading exceeds 20 wt%, macrocrystalline ZnO appears on the external surface of zeolite L. Different from bulk ZnO materials, these sub-nanometric ZnO clusters exhibit their absorption onset below 255 nm and a blue luminescence band in the range of 404-422 nm. The temperature-dependent luminescence demonstrates that the amount of the ZnO loading significantly affects the exciton-phonon interaction between the ZnO clusters and the zeolite host. The ZnO clusters exhibit a picosecond scale emission lifetime at room temperature.     

Synthesis of Sn-doped ZnO nanorods and their photocatalytic properties

Sn-doped ZnO nanorods were fabricated by a hydrothermal route, and characterized by X-ray diffraction, field emission scanning electron microscope, UV-vis spectroscopy, Raman spectra, solid-state nuclear magnetic resonance (NMR) spectra, and room temperature photoluminescence spectroscopy. Solid-state NMR result confirms that Sn⁴⁺ was successfully incorporated into the crystal lattice of ZnO. Room temperature photoluminescence showed that all the as-synthesized products exhibited a weak UV emission (380 nm) and a strong visible emission (540 nm), but the intensities of the latter emission increased with increase in Sn concentration. The improvement of visible emission at 540 nm in the Sn-doped ZnO samples was suggested to be a result of the lattice defects increased by doping of Sn in zinc oxide. In addition, the photocatalytic studies indicated that Sn-doped ZnO nanorods are a kind of promising photocatalyst in remediation of water polluted by some chemically stable azo dyes.     

Large-scale synthesis of hexagonal cone-shaped ZnO nanoparticles with a simple route and their application to photocatalytic degradation

We report the large-scale synthesis of hexagonal cone-shaped ZnO nanoparticles by the esterification between zinc acetate and alcohol. The morphology of the ZnO nanoparticles was investigated by transmission electron microscopy, selected area electron diffraction and scanning electron microscopy measurements. The synthesized ZnO nanoparticles are single-crystalline with hexagonal phase and show a strong UV emission at −378 nm due to the excellent crystallinity of particles. A possible formation mechanism of the hexagonal cone-shape structure is proposed. Furthermore, the as-prepared ZnO particles exhibit high photocatalytic activity for the photocatalytic degradation of Rhodamine B, indicating that the ZnO nanostructure is promising as a semiconductor photocatalyst.     

Cathodoluminescence and its mapping of flower-like ZnO, ZnO/ZnS core-shell and tube-like ZnS nanostructures

The cathodoluminescence (CL) properties including intensity and distribution of the band to band and defect emission of the flower-like ZnO, ZnO/ZnS core-shell and tube-like ZnS nanostructures have been investigated. It is indicated that the Ultraviolet (UV) emission at 380 nm of the flower-like ZnO nanostructures due to the band to band emission is weaker than their yellow emission at 600 nm induced by interstitial oxygen. Moreover, the UV emission of the ZnO nanorods unevenly distributes from the tip to the end. The UV emission on the tip is stronger than that of others due to the waveguide. On the contrary, the yellow emission at 600 nm is uniform. Furthermore, the UV emission of ZnO has been greatly enhanced and the yellow emission has been inhibited by the formation of ZnO/ZnS core-shell nanostructures in the sulfuration process due to the elimination of interstitial oxygen. However, the polycrystalline tube-like ZnS nanostructures shows the uniform and weak defect emission due to S vacancies.     

Controllable growth of zinc oxide nanosheets and sunflower structures by anodization method

Large scale of ZnO nanosheets and sunflower structures were fabricated by anodization of zinc in (NH₄)₂SO₄ and NH₄Cl aqueous electrolytes. The products were characterized via scanning electron microscope, transmission electron microscope and X-ray diffraction analysis. Results show that the sheets are about 20–50 μm in dimension and 20 nm in thickness. The sunflower microstructures are about 400–500 μm in dimension. The possible growth mechanism is suggested on the basis of experimental results.     

Study on field emission and photoluminescence properties of ZnO/graphene hybrids grown on Si substrates

Zinc oxide/graphene (ZnO/G) hybrids are prepared on n-Si (1 0 0) substrates by electrophoretic deposition and magnetron sputtering technique. The crystal structure, morphology and photoluminescence (PL) properties of the ZnO/G hybrids are analyzed via X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and fluorescence–phosphorescence spectrometer, respectively. The results indicate that the crystal quality of ZnO nanostructure deteriorates after depositing graphene buffer layer. Whereas many three dimensional stacking blowballs form in the ZnO/G hybrid, creating a larger surface area than that of ZnO nanostructure. The photoluminescence (PL) spectrum of the ZnO/G hybrid contains multi-peaks, which are consistent with ZnO nanostructure except for two new peaks at 390 and 618 nm. In addition, field emission measurement reveals that E_to and E_thr decrease from 8.01 V μm⁻¹ and 14.90 V μm⁻¹ of the ZnO nanostructure to 2.72 V μm⁻¹ and 7.70 V μm⁻¹ of the ZnO/G hybrid. ZnO/G hybrid is characteristic of having excellent emitting behavior suitable for application in field emission technology.     

Hydrothermal preparation, characterization and property research of flowerlike ZnO nanocrystals built up by nanoflakes

In the present paper, flowerlike ZnO nanocrystals were successfully synthesized via a simple hydrothermal route in the presence of sodium dodecyl sulfate (SDS), employing Zn(CH₃COO)₂ and KOH as the starting reactants. The phase and morphology of the product were characterized by means of powder X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and select area electron diffraction (SAED). The optical properties of the product were studied. Some factors influencing the morphology of the final product including reaction time, temperature and amounts of the surfactant were discussed. Researches showed that the flowerlike ZnO nanocrystals had a good photo-catalytic activity for degradation of safranine T under 254 nm UV light irradiation. The electrochemical research of the product showed that flowerlike ZnO nanocrystals could promote electron transfers between catechol and the Au electrode. A possible formation mechanism was also suggested based on the results of the experiments.     

Structural properties and growth mechanism of flower-like ZnO structures obtained by simple solution method

Flower-shaped zinc oxide (ZnO) structures have been synthesized in the reaction of aqueous solution of zinc nitrate and NaOH at 90 °C. To examine the morphology of ZnO nanostructures, time-dependent experiments were carried out. Detailed structural observation showed that the flower-like structures consist of triangular-shaped leaves, having sharpened tips with wider bases. Photoluminescence spectrum measured at room temperature show a sharp UV emission at 381 nm and a strong and broad green emission at 480-750 nm attributed to structural defects. A possible growth mechanism for the formation of flower-shaped ZnO structures is discussed in detail.     

The effect of growth conditions on the properties of ZnO nanorod dye-sensitized solar cells

In this article, we report ZnO nanorod samples grown on transparent conductive SnO₂:F (FTO) glass substrates by two different growth routes through hydrothermal method in a closed autoclave. One route is one-step continuous growth for 10 h. The other route is discrete multi-step growth for total 48 h. In this process, fresh solution was repeatedly introduced in every step. The structural, photoluminescence (PL) and photovoltaic properties of the as-prepared nanorod arrays were investigated. The nanorod arrays obtained through multi-step growth show longer rods, higher aspect ratio, larger spacing, better crystalline quality. The PL spectrum of nanorod arrays obtained through multi-step growth shows a strong and sharp near-band-gap emission (UV) peak and a weak green-yellow emission (GY) peak (I_UV/I_GY = 7.7), which also implies its good crystallinity and high optical quality. Dye-sensitized solar cells based on ZnO nanorod arrays were fabricated, and those grown with discrete multi-step procedure present better photovoltaic properties duo to its special morphology and better crystal quality.     

Novel synthesis of aligned Zinc oxide nanorods on a glass substrate by sonicated sol-gel immersion

For the first time, aligned ZnO nanorod structured thin films have been synthesized on a glass substrate, which had been coated with an Al-doped ZnO thin film, using the sonicated sol-gel immersion method. These nanorods were found to have an average diameter of 100 nm and an average length of 500 nm, with hexagonal wurtzite phase grew preferentially along the c-axis direction. A sharp ultra-violet (UV) emission centred at 383 nm corresponding to the free exciton recombination was observed in a room temperature photoluminescence (PL) spectrum. The prepared ZnO nanorod structured thin film is transparent in the visible region with an average transmittance of 78% in the 400-800 nm wavelength range and high absorbance properties in the UV region (< 400 nm). The results indicate that the prepared ZnO nanorods are suitable for ultra-violet photoconductive sensor applications.     

Growth and optical properties of ZnO nanorods by introducing ZnO sols prior to hydrothermal process

ZnO nanorods of 25 nm with quite homogeneous size and shape have been fabricated by introducing ZnO sols as nucleation centers prior to the hydrothermal reaction. The samples were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, photoluminescence and resonant Raman spectra. After ZnO sols are introduced, the width of the resulting nanorods decreases above an order of magnitude and the aspect ratio increases 5 times. The increase of the intensity ratio of ultraviolet to visible emissions in room-temperature photoluminescence spectrum and the decrease of the Raman linewidths show the improvement in the quality of ZnO nanorods. Influences of the number of seed nuclei and the aging time of ZnO sols on the morphology of ZnO nanorods are discussed.     

Effect of thickness on the structural, electrical and optical properties of ZnO films

A series of ZnO films of different thickness have been deposited on glass substrates using sol-gel technique by varying the number of spin coatings and the effect of film thickness on the structural, electrical and optical properties have been investigated. The XRD results indicate that the full width at half maximum (FWHM) of the (0 0 2) diffraction peak and the strain along c-axis are decreased as the film is grown up to a thickness of 300 nm. Above 300 nm, the strain again becomes appreciable. The surface morphology shows that the grains become more uniform and bigger in size as the film thickness increases. Electrical result shows that although ZnO film with thickness of around 260 nm has the highest resistivity but is better for current conduction. The excitonic nature in the absorption spectrum becomes prominent for a film with thickness of around 260 nm. The band gap increases and then decreases as the film grows thicker.     

Self-assembly of ZnO nanosheets into nanoflowers at room temperature

A singularity flower-like ZnO nanostructure was prepared on a large scale through a very simple solution method at room temperature and under ambient pressure in a very short time. The flower-like ZnO nanostructures were self-assembled by thin and uniform nanosheets, with a thickness of around 5 nm. X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM) were used to characterize the structure and morphology. The possible growth mechanism was discussed based on the reaction process. The blue shift in the UV-vis spectra of the ZnO nanostructures was also observed.