New substitutions and novel derivatives of the Aurivillius phases, Bi5TiNbWO15 and Bi4Ti3O12

We investigated isomorphous substitution of several metal atoms in the Aurivillius structures, Bi₅TiNbWO₁₅ and Bi₄Ti₃O₁₂, in an effort to understand structure-property correlations. Our investigations have led to the synthesis of new derivatives, Bi₄LnTiMWO₁₅ (Ln = La, Pr; M = Nb, Ta), as well as Bi₄PbNb₂WO₁₅ and Bi₃LaPbNb₂WO₁₅, that largely retain the Aurivillius (n = 1) + (n = 2) intergrowth structure of the parent oxide Bi₅TiNbWO₁₅, but characteristically tend toward a centrosymmetric/tetragonal structure for the Ln-substituted derivatives. On the other hand, coupled substitution, 2Ti^IV → M^V + Fe^III in Bi₄Ti₃O₁₂, yields new Aurivillius phases, Bi₄Ti_3−2xNb_xFe_xO₁₂ (x = 0.25, 0.50) and Bi₄Ti_3−2xTa_xFe_xO₁₂ (x = 0.25) that retain the orthorhombic noncentrosymmetric structure of the parent Bi₄Ti₃O₁₂. Two new members of this family, Bi₂Sr₂Nb₂RuO₁₂ and Bi₂SrNaNb₂RuO₁₂ that are analogous to Bi₂Sr₂Nb₂TiO₁₂, possessing tetragonal (I4/mmm) Aurivillius structure have also been synthesized.     

Complete oxidation of acetaldehyde on Pt/CeO2-ZrO2-Bi2O3 catalysts

Pt/CeO₂-ZrO₂-Bi₂O₃ catalysts for catalytic combustion of acetaldehyde, which is one of volatile organic compounds (VOCs), were prepared by a wet impregnation method in the presence of polyvinylpyrrolidone K25 (PVP). The addition of PVP in the preparation process was effective to enhance the specific surface area and the Pt²⁺ ratio on the surface. Additionally, the pore volume and size of the catalysts were modified by the PVP addition. The Pt/CeO₂-ZrO₂-Bi₂O₃ catalysts are specific for the total acetaldehyde oxidation and CO and any acetaldehyde-derivative compounds were not observed as by-products. The catalytic activity of the Pt/CeO₂-ZrO₂-Bi₂O₃ catalysts was significantly promoted by the PVP addition and the total oxidation temperature decreased. By the optimization of the amount of platinum, the complete oxidation of acetaldehyde was realized at a temperature as low as 140 °C on a 10 wt%Pt/CeO₂-ZrO₂-Bi₂O₃ catalyst.     

Surfactant-free synthesis of Bi2WO6 multilayered disks with visible-light-induced photocatalytic activity

The synthesis of bismuth tungstate (Bi₂WO₆) multilayered disk which was constructed by oriented square nanoplates was easily realized via a simple surfactant-free hydrothermal method. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM) were used to investigate the as-obtained product. The results indicated that the three-dimensional (3D) Bi₂WO₆ multilayered disk was constructed by self-assembly of square nanoplates via a perfect oriented manner. The formation mechanism of the product was carefully investigated on the basis of the results of time-dependent experiments. In addition, studies of the photocatalytic property demonstrated that the as-obtained Bi₂WO₆ could exhibit excellent visible-light-driven photocatalytic activity for the degradation of Rhodamine B (RhB).     

Temperature-dependent oxygen release, intercalation behaviour and catalytic properties of V2O5·xNb2O5 compounds

In order to investigate the catalytic properties, V_2,38Nb_10,7O_32,7, VNb₉O₂₅ and solid solutions of V₂O₅ in TT-Nb₂O₅ were prepared by thermal decomposition of freeze-dried oxalate precursors. The samples were characterised by X-ray diffraction and surface area determination. The crystalline samples are capable of the intercalation of sodium and lithium ions from solution. Above a temperature of about 500 °C, in dependence on the oxygen partial pressure a reversible release and uptake of oxygen without a structural variation takes place. The catalytic properties have been evaluated for the oxidative dehydrogenation (ODH) of propane and propene. There are only small differences in the catalytic activity of the different crystalline samples. Because of the relative high starting temperature, a selective catalytic oxidation of propane to propene is hardly observed.     

Hydrothermal synthesis, characterization and magnetic properties of NaVGe2O6 and LiVGe2O6

Supercritical fluids are shown to be an excellent reaction media for the synthesis of novel solid state phases at intermediate temperatures. LiVGe₂O₆ and NaVGe₂O₆ have the common pyroxene structure composed of VO₆ linear chains. NaVGe₂O₆ crystallizes in the monoclinic space group C2/c with four formula units having cell dimensions a = 9.960(4) Å, b = 8.853(10) Å, c = 5.4861(10) Å, β = 106.403(3)°. The structure was refined until R = 0.0290 and R_w = 0.0370. For LiVGe₂O₆ in space group P2₁/c: a = 9.8508(7) Å, b = 8.754(3) Å, c = 5.3948(13) Å, β = 108(3)°, R = 0.0240 and R_w = 0.0250. The compounds contain edge-shared VO₆ octahedral chains and corner-shared GeO₄ tetrahedral chains. The presence of these VO₆ chains results in spin-Peierls distortion. Structural and physical characterization of the compounds are reported.     

Synthesis, characterization and photocatalytic properties of nanosized Bi2WO6, PbWO4 and ZnWO4 catalysts

Nanosized Bi₂WO₆, PbWO₄ and ZnWO₄ photocatalysts were synthesized by a mild hydrothermal crystallization process. The physical and photophysical properties of the catalysts were characterized by X-ray diffractometry, Brunauer-Emmet-Teller surface area and porosity measurements, transmission electron microscopy, Raman spectra, and diffused reflectance spectroscopy. The rhodamine-B photodegradation in aqueous medium was employed as a probe reaction to test the photoactivities of the as-prepared samples under four irradiation wavelengths. Bi₂WO₆ not only presented the photocatalytic activity in the wide spectral scope, including UV and visible light but also exhibited the strong photosensitized capability to transform RhB under visible light irradiation (λ > 490 nm). ZnWO₄ only displayed relatively high photoactivity under UV irradiation. However, PbWO₄ showed poor photoactivity under any light irradiation. On the basis of the calculated density functional theory (DFT), the photocatalytic mechanisms were discussed.     

Synthesis of non-stoichiometric Bi2O4−x by oxidative precipitation

Bi₂O_4−x, a Bi mixed-valence phase was prepared at 95 °C, by a precipitation process, in a basic medium with a highly oxidizing K₂S₂O₈/Na₂S₂O₈. This phase has a low thermal stability as it decomposes below 400 °C in a multiple step process by some O₂ losses prior to finally transforming into γ-Bi₂O₃. The as-prepared powders are 50-60 nm in size with a narrow size distribution. Optical spectra of Bi₂O_4−x exhibit a broad absorption band with a band gap of ∼1.4 eV as compared to 2.61 eV for Bi₂O₃. The composition of this non-stoichiometric phase, which crystallizes in cubic fluorite related structure with a cell parameter of 5.538(3) Å, is Bi₂O_{3.65 ± 0.10}.     

TiO2 supported on rod-like mesoporous silica SBA-15: Preparation, characterization and photocatalytic behaviour

TiO₂ nanoparticles have been successfully incorporated in the pores of mesoporous silica SBA-15 with different morphologies by a wet impregnation method. The composites were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), inductively coupled plasma (ICP) emission spectroscopy, transmission electron microscopy (TEM), N₂-sorption and UV-Vis diffuse reflectance spectroscopy. The photodegradation of methyl orange (MO) was used to study their photocatalytic property. It is indicated that the morphology of SBA-15 had a great influence on the photocatalytic activity of the composites. When TiO₂/SBA-15 composite was prepared by loading TiO₂ nanoparticles on uniform rod-like SBA-15 of 1 μm length, it showed higher photocatalytic degradation rate than that on less regular but much larger SBA-15 support. This difference was rationalized in terms of the homogeneously distributed and shorter channels of rod-like SBA-15, which favored mass transport and improved the efficient utilization of the pore surface.     

Structural characterization and novel optical properties of defect chalcopyrite ZnGa2Te4 thin films

Stoichiometric thin film samples of the ternary ZnGa₂Te₄ defect chalcopyrite compound were prepared and characterized by X-ray diffraction technique. The elemental chemical composition of the prepared bulk material as well as of the as-deposited film was determined by energy-dispersive X-ray spectrometry. ZnGa₂Te₄ thin films were deposited, by conventional thermal evaporation technique onto highly cleaned glass substrates. The X-ray and electron diffraction studies revealed that the as-deposited and the annealed ZnGa₂Te₄ films at annealing temperature t_a ≤ 548 K are amorphous, while those annealed at t_a ≥ 573 K (for 1 h), are polycrystalline. The optical properties of the as-deposited films have been investigated for the first time at normal incidence in the spectral range from 500 to 2500 nm. The refractive index dispersion in the transmission and low absorption region is adequately described by the Wemple–DiDomenico single oscillator model, whereby, the values of the oscillator parameters have been calculated. The analysis of the optical absorption coefficient revealed an in-direct optical transition with energy of 1.33 eV for the as-deposited sample. This work suggested that ZnGa₂Te₄ is a good candidate in solar cell devices as an absorbing layer.     

Synthesis by an ionic liquid-assisted method and optical properties of nanoflower Y2O3

Flower-like Y₂O₃ nano-/microstructured phosphors without metal activators have successfully been fabricated by an ionic liquid (IL)-assisted method involving temperature (600 °C) annealing. In this paper, the effect of IL concentration on the morphology of the product has been investigated. The IL plays a crucial role in the formation of various morphologies of Y₂O₃. The structural and morphological features of the obtained samples have been characterized by means of X-ray powder diffraction (XRD) analysis, photoluminescence spectra (PL), Fourier-transform infrared (FT-IR) spectra and X-ray photoelectron spectra (XPS). The photoluminescence spectra of the products exhibit an intense bluish-white emission (ranging from 405 to 430 nm and centered at 418 nm). The luminescent mechanisms have been ascribed to the carbon impurities in the Y₂O₃ host. The effect of the ILs cation and the counter anions on the Y₂O₃ morphology of these nanostructures was studied experimentally. It was observed that Y₂O₃ morphology and PL of these nanostructures were strongly influenced by the type of cation and anion. As the length of the subsidiary chain of cation section of IL (imidaziole ione) reduces, the thickness of the nano-sheets increases. It is expected that the present method may easily be extended to similar nano-/microstructures of other oxide materials. Such investigations are currently underway.     

Cu5Sb2O8SiO4, an open framework structure with copper uncommon coordination modes: CuO6 and CuO8

Cu₅Sb₂O₈SiO₄ is orthorhombic, space group Pcca, with a = 19.031 (2), b = 9.3944 (6), c = 9.602 (2) Å, and z = 8. Its crystal structure was determined using single crystal X-ray diffraction (R₁ = 0.0432 and wR₂ = 0.1146). The compound presents a parwelite-like structure. Its anionic three-dimensional framework is built up of corner-sharing SbO₆ octahedra and SiO₄ tetrahedra, delimiting interconnected channels wherein Cu²⁺ with different coordination modes, are located. The χ_M and χ_MT product versus T plots, showed the Cu₅Sb₂O₈SiO₄ material to exhibit an anti-ferromagnetic character with a Neel temperature of about 27 K.     

Structural, electrical and optical properties of TiO2-WO3 polycrystalline ceramics

Mixed oxides from the TiO₂-WO₃ system were prepared as polycrystalline materials. Their phase composition and electrical conductivity were investigated using X-ray diffraction (XRD) and dc electrical measurements. The energy gap, evaluated on the basis of optical measurements, was presented as a function of W concentration. The influence of chemical composition on structural, semiconducting and optical properties of the TiO₂-WO₃ polycrystalline ceramics was discussed.     

A novel compound with the formula Cd2InVO6

As a result of a solid-state reaction, a compound with the formula Cd₂InVO₆ has been obtained for the first time. This compound melts congruently at 1050 ± 10 °C. It crystallises in the monoclinic system and the unit cell parameters are: a = 0.7964(2) nm, b = 1.1311(3) nm, c = 0.6001(1) nm, γ = 104.1°, Z = 4.     

Synthesis and properties of solid solutions of hexagonal YCu0.5Ti0.5O3 with YMO3 (M = Mn, Cr, Fe, Al, Ga, and In)

Solid solutions of the type Y(Cu_0.5Ti_0.5)_1−xM_xO₃ with a hexagonal structure were prepared for M = Mn, Fe, Cr, Al, Ga, and In. A complete solid solution could be obtained only in the case of M = Mn. The green color of YCu_0.5Ti_0.5O₃ was found to be enhanced by small substitutions of Al, Ga, and In. All compositions containing Mn were black in color. Suppression of magnetic transitions is observed upon co-doping of Cu/Ti into YMnO₃. Measurements of dielectric constant suggest some magneto-electric coupling may be present in the Y(Cu_0.5Ti_0.5)_1−xMn_xO₃ solid solution.     

Characterization and photocatalytic activity of Bi3TiNbO9 nanocrystallines synthesized by sol-gel process

Nanocrystalline Bi₃TiNbO₉ powders were synthesized by a sol-gel process, based on a colloid solution of bismuth acetate, titanium butoxide and niobium ethoxide. X-ray diffraction analysis revealed that pure Aurivillius phase of Bi₃TiNbO₉ could be prepared at a calcination temperature of 500 °C. By using scanning electron microscopy and gas adsorption method, the morphology and the specific surface area of the powders were examined. The photophysical properties of Bi₃TiNbO₉ were investigated by means of the UV-visible diffuse reflectance spectrum, from which a band gap ∼3.2 eV was empirically calculated. The as-prepared Bi₃TiNbO₉ powders were applied in the photodegradation of organic contaminant for the first time, and they showed effective photocatalytic activity for the complete decomposition of methyl orange under UV light irradiation.     

Nonstoichiometric orthorhombic titanium oxide, TiO2−δ and its thermochromic properties

Redox relationship among anatase, rutile, and a new nonstoichiometric orthorhombic titanium oxide was elucidated. Single crystal of nonstoichiometric orthorhombic titanium oxide TiO_1.94 was prepared by reducing a single crystal of rutile TiO₂ at 950 °C in H₂ for 1 h based on this relationship. The single crystallinity was demonstrated by both the Laue and the Debye-Scherrer methods. Temperature dependence of the conductivity and the reflectance spectrum was measured for the single crystal of TiO_1.94, and it was found that the reflectivity in near-infrared region over 1700 nm gradually increased with increasing temperature. “Smart windows” using this titanium oxide was proposed.     

Ligand-assisted hydrothermal synthesis of ZnWO4 rods and their photocatalytic activities

ZnWO₄ rods were prepared using a ligand-assisted hydrothermal method with ZnCl₂ and Na₂WO₄ in the presence of various amines as ligands for zinc ions. The choice of ligand was found to play an important role in the formation of ZnWO₄ rods. The aspect ratio of the ZnWO₄ rods increased with increasing ligand strength. XRD and HRTEM confirmed that the ZnWO₄ rods grow along the [1 0 0] direction. The photochemical activities of the ZnWO₄ rods for the decomposition of Rhodamine 6G were examined. The photocatalytic activity was found to depend on the aspect ratio of the ZnWO₄ rods.     

Synthesis and upconversion luminescence properties of Yb/Er codoped BaGd2(MoO4)4 powder

Synthesis and upconversion luminescence properties of the new BaGd₂(MoO₄)₄:Yb³⁺,Er³⁺ phosphor were reported in this paper. The phosphor powder was obtained by the traditional high temperature solid-state method, and its phase structure was characterized by the XRD pattern. Based on the upconversion luminescence properties studies, it is found that, under 980 nm semiconductor laser excitation, BaGd₂(MoO₄)₄:Yb³⁺,Er³⁺ phosphor exhibits intense green upconversion luminescence, which is ascribed to ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transition of Er³⁺. While the observed much weaker red emission is due to the non-radiative relaxation process of ⁴S_3/2 → ⁴F_9/2 and ⁴F_9/2 → ⁴I_15/2 transition originating from the same Er³⁺. The concentration quenching effects for both Yb³⁺ and Er³⁺ were found, and the optimum doping concentrations of 0.5 mol% Yb³⁺ and 0.08 mol% Er³⁺ in the new BaGd₂(MoO₄)₄ Gd³⁺ host were established.