共查询到19条相似文献,搜索用时 836 毫秒
1.
长周期光纤光栅的制作方法和应用研究进展 总被引:4,自引:0,他引:4
概述了国内外长周期光纤光栅的制作方法、长周期光纤光栅温度应力特性和在通信、传感领域内的广泛应用,并且对各种制备工艺进行了比较 相似文献
2.
3.
长周期长纤光栅的制作方法和应用研究进展 总被引:2,自引:0,他引:2
概述了国内外长周期光纤光栅的制作方法,长周期温度应力特性和在通信,传感领域内的广泛应用,并且对各种制备工艺进行了比较。 相似文献
4.
5.
光子晶体光纤光栅是一种新型材料光纤光栅,具有常规光纤光栅所没有的优异特性.对光子晶体光纤光栅的写入方法进行了介绍和分析比较,阐述了光子晶体光纤布拉格光栅和光子晶体光纤长周期光栅的特性并对应用前景进行了讨论. 相似文献
6.
7.
8.
光纤的光敏特性及光纤光栅紫外写入技术 总被引:1,自引:1,他引:0
本文扼要评述了光纤的光敏特性及其微观机理,描述了光纤光栅光学特性,并对迄今发展起来的几种主要光纤光栅紫外写入技术进行了全面的评介,最后简要介绍了光纤光栅在激光和通信等方面的一些重要应用。 相似文献
9.
10.
聚合物封装光纤布拉格光栅传感器温度压力特性研究 总被引:9,自引:2,他引:7
分析了聚合物封装光纤布拉格光栅(FBG)传感器温度与压力响应特性。通过实验对某种特殊聚合物封装光纤光栅的温度与压力响应进行研究,发现当温度变化范围较大时.由于温度对材料弹性模量的影响.光纤光栅的压力响应灵敏度不再为常数,而是随温度变化的。当温度在30℃时.其压力响应灵敏度为0.036nm/MPa.在180℃时则变为0.175nm/MPa,且灵敏度系数随温度的变化呈分段线性变化。因此在使用聚合物封装实现光纤光栅传感器增敏以及大范围温度和压力的同时测量时,需要将弹性模量作为温度的函数.代入光纤光栅温度与压力响应灵敏度系数矩阵公式中以消除大范围温度变化对聚合物力学特性的影响。 相似文献
11.
Bragg gratings in polymethyl methacrylate (PMMA)-based polymer fibers were created and were tuned thermally. It is found that the tuning range is more than 18 nm over a temperature variation of 50°C. More importantly, no hysteresis effect was observed as the gratings were heated up and cooled down 相似文献
12.
Polymer fiber Bragg gratings (FBGs) with 28-dB transmission rejection and a line width less than 0.5 nm has been achieved for the first time. This result is achieved based on the systematic investigation of growth dynamics of polymer FBGs. We have observed that the growth of polymer FBGs bears some similarities to that of silica FBGs. This work links the mechanism of polymer fiber gratings formation to silica fiber grating and helps to gain better understanding of polymer fiber grating formation process 相似文献
13.
14.
Blazed diffraction gratings fabricated using X-ray lithography: fabrication, modeling and simulation
Diffraction gratings are used in optical communications devices, spectrographs, optical scanners, monochromators, and in other instances. Diffraction gratings are either transmission or reflection. Reflective gratings are, usually, either ruled or holographic. Blazed gratings (step-echelette or phase gratings) are non-planar gratings. We present the fabrication of blazed diffraction gratings using X-ray lithography. We model, theoretically, the development process of X-ray exposed X-ray sensitive resist material (polymethyl methacrylate), and we establish a simulation algorithm, the ray-tracing algorithm based on the Hamilton–Jacobi equation. Theoretical predictions based on simulation results validate fully the fabricational results. 相似文献
15.
16.
设计了一种聚甲基丙烯酸甲酯(PMMA)基的单偏振单模(SPSM)微结构聚合物光纤(MPOF)。采用全矢量平面波展开法并结合完美匹配边界条件,对其偏振特性进行了理论模拟。详细讨论了微结构光纤参数的变化对单偏振单模带宽和工作波长的影响,发现在0.57~0.71μm的可见光波长范围,由于基模两个正交偏振模的截止波长不同,这种微结构聚合物光纤只能传输基模中的一个偏振模。光束传播法计算表明,在波长0.65μm处具有7圈空气孔的单偏振单模微结构聚合物光纤的传导偏振模约束损耗仅为1.24dB/m,这种低损耗的单偏振单模微结构聚合物光纤可有效消除传统保偏光纤固有的偏振串扰和偏振模色散。 相似文献
17.
18.
19.
激光医学治疗用激光器包括紫外、红外、可见光激光器,激光用光纤输出端形式包括点状、柱状、球状等;光纤在医学器械的应用包括光纤照明和激光传输,现今石英光纤、多组份玻璃光纤、聚合物光纤以及红外晶体光纤、氟化物玻璃光纤、红外空芯波导等在医学治疗有许多应用,其中石英光纤已在医学美容、手术治疗和光动力疗法等方面获得广泛应用,多组份玻璃光纤可应用于光炙仪、光热治疗仪、牙科光固化机、牙齿美白仪、光纤内窥镜等医疗仪器中,聚合物光纤POF可应用于光纤黄疸治疗仪、激光血管内外照射治疗中,光纤在今后的激光医学治疗中发挥更加重要的作用. 相似文献