Multi‐objective robust fuzzy fractional order proportional–integral–derivative controller design for nonlinear hydraulic turbine governing system using evolutionary computation techniques

The present paper proposes a novel multi‐objective robust fuzzy fractional order proportional–integral–derivative (PID) controller design for nonlinear hydraulic turbine governing system (HTGS) by using evolutionary computation techniques. The fuzzy fractional order PID (FOPID) controller takes closed loop error and its fractional derivative as inputs and performs fuzzy logic operations. Then, it produces the output through the fractional order integrator. The predominant advantages of the proposed controller are its capability to handle complex nonlinear processes like HTGS in heuristic manner, due to fuzzy incorporation and extending an additional flexibility in tuning the order of fractional derivative/integral terms to enhance the closed loop performance. The present work formulates the optimal tuning problem of fuzzy FOPID controller for HTGS as a multi‐objective one instead of a traditional single‐objective one towards satisfying the conflicting criteria such as less settling time and minimum damped oscillations simultaneously to ensure the improved dynamic performance of HTGS. The multi‐objective evolutionary computation techniques such as non‐dominated sorting genetic algorithm‐II (NSGA‐II) and modified NSGA‐II have been utilized to find the optimal input/output scaling factors of the proposed controller along with the order of fractional derivative/integral terms for HTGS system under no load and load turbulence conditions. The performance of the proposed fuzzy FOPID controller is compared with PID and FOPID controllers. The simulations have been conducted to test the tracking capability and robust performance of HTGS during dynamic set point changes for a wide range of operating conditions and model parameter variations, respectively. The proposed robust fuzzy FOPID controller has ensured better fitness value and better time domain specifications than the PID and FOPID controllers, during optimization towards satisfying the conflicting objectives such as less settling time and minimum damped oscillations simultaneously, due to its special inheritance of fuzzy and FOPID properties.     

直线一级倒立摆分数阶控制器设计及仿真

针对直线一级倒立摆的稳定控制问题,设计了分数阶比例积分(FOPI和FO[PI])控制器。首先,根据Newton力学方法建立了倒立摆系统的数学模型。然后,采用基于向量的增益鲁棒性分数阶控制器参数求解简化算法,设计了分数阶比例积分控制器。最后,在MATLAB环境下进行了分数阶比例积分控制器参数整定方法的有效性验证,并且对倒立摆系统分别采用分数阶比例积分控制器和整数阶PID(IOPID)控制器进行了稳定控制仿真实验,并将得到的摆杆角度响应曲线进行了对比分析。结果表明:分数阶比例积分控制器对系统的稳定控制效果优于IOPID控制器,且在分数阶比例积分控制器中,FO[PI]控制器对系统稳定控制最好,响应时间较快、振荡幅值较小且具有鲁棒性。     

Tuning fractional order proportional integral controllers for fractional order systems

In this paper, two fractional order proportional integral controllers are proposed and designed for a class of fractional order systems. For fair comparison, the proposed fractional order proportional integral (FOPI), fractional order [proportional integral] (FO[PI]) and the traditional integer order PID (IOPID) controllers are all designed following the same set of the imposed tuning constraints, which can guarantee the desired control performance and the robustness of the designed controllers to the loop gain variations. This proposed design scheme offers a practical and systematic way of the controllers design for the considered class of fractional order plants. From the simulation and experimental results presented, both of the two designed fractional order controllers work efficiently, with improved performance comparing with the designed stabilizing integer order PID controller by the observation. Moreover, it is interesting to observe that the designed FO[PI] controller outperforms the designed FOPI controller following the proposed design schemes for the class of fractional order systems considered.     

Design of fractional-order PIλDμ controllers with an improved differential evolution

Differential evolution (DE) has recently emerged as a simple yet very powerful technique for real parameter optimization. This article describes an application of DE to the design of fractional-order proportional–integral–derivative (FOPID) controllers involving fractional-order integrator and fractional-order differentiator. FOPID controllers’ parameters are composed of the proportionality constant, integral constant, derivative constant, derivative order and integral order, and its design is more complex than that of conventional integer-order proportional–integral–derivative (PID) controller. Here the controller synthesis is based on user-specified peak overshoot and rise time and has been formulated as a single objective optimization problem. In order to digitally realize the fractional-order closed-loop transfer function of the designed plant, Tustin operator-based continuous fraction expansion (CFE) scheme was used in this work. Several simulation examples as well as comparisons of DE with two other state-of-the-art optimization techniques (Particle Swarm Optimization and binary Genetic Algorithm) over the same problems demonstrate the superiority of the proposed approach especially for actuating fractional-order plants. The proposed technique may serve as an efficient alternative for the design of next-generation fractional-order controllers.     

Stabilizing and robust fractional order PI controller synthesis for first order plus time delay systems

For all the stable first order plus time delay (FOPTD) systems, a fractional order proportional integral (FOPI) or a traditional integer order proportional integral derivative (IOPID) controller can be designed to fulfill a flat phase constraint and two design specifications simultaneously: gain crossover frequency and phase margin. In this paper, a guideline for choosing two feasible or achievable specifications, and a new FOPI/IOPID controller synthesis are proposed for all the stable FOPTD systems. Using this synthesis scheme, the complete feasible region of two specifications can be obtained and visualized in the plane. With this region as the prior knowledge, all combinations of two specifications can be verified before the controller design. Especially, it is interesting to compare the areas of these two feasible regions for the IOPID and FOPI controllers. This area comparison reveals, for the first time, the potential advantages of one controller over the other in terms of achievable performances. A simulation illustration is presented to show the effectiveness and the performance of the designed FOPI controller compared with the optimized integer order PI controller and the IOPID controller designed following the same synthesis for the FOPI in this paper.     

Optimum design of fractional order PID controller for AVR system using chaotic ant swarm

Fractional-order PID (FOPID) controller is a generalization of standard PID controller using fractional calculus. Compared to PID controller, the tuning of FOPID is more complex and remains a challenge problem. This paper focuses on the design of FOPID controller using chaotic ant swarm (CAS) optimization method. The tuning of FOPID controller is formulated as a nonlinear optimization problem, in which the objective function is composed of overshoot, steady-state error, raising time and settling time. CAS algorithm, a newly developed evolutionary algorithm inspired by the chaotic behavior of individual ant and the self-organization of ant swarm, is used as the optimizer to search the best parameters of FOPID controller. The designed CAS-FOPID controller is applied to an automatic regulator voltage (AVR) system. Numerous numerical simulations and comparisons with other FOPID/PID controllers show that the CAS-FOPID controller can not only ensure good control performance with respect to reference input but also improve the system robustness with respect to model uncertainties.     

Fractional-order load-frequency control of interconnected power systems using chaotic multi-objective optimization

Fractional-order proportional-integral-derivative (FOPID) controllers are designed for load-frequency control (LFC) of two interconnected power systems. Conflicting time-domain design objectives are considered in a multi-objective optimization (MOO)-based design framework to design the gains and the fractional differ-integral orders of the FOPID controllers in the two areas. Here, we explore the effect of augmenting two different chaotic maps along with the uniform random number generator (RNG) in the popular MOO algorithm—the Non-dominated Sorting Genetic Algorithm-II (NSGA-II). Different measures of quality for MOO, e.g. hypervolume indicator, moment of inertia-based diversity metric, total Pareto spread, spacing metric, are adopted to select the best set of controller parameters from multiple runs of all the NSGA-II variants (i.e. nominal and chaotic versions). The chaotic versions of the NSGA-II algorithm are compared with the standard NSGA-II in terms of solution quality and computational time. In addition, the Pareto optimal fronts showing the trade-off between the two conflicting time domain design objectives are compared to show the advantage of using the FOPID controller over that with simple PID controller. The nature of fast/slow and high/low noise amplification effects of the FOPID structure or the four quadrant operation in the two inter-connected areas of the power system is also explored. A fuzzy logic-based method has been adopted next to select the best compromise solution from the best Pareto fronts corresponding to each MOO comparison criteria. The time-domain system responses are shown for the fuzzy best compromise solutions under nominal operating conditions. Comparative analysis on the merits and de-merits of each controller structure is reported then. A robustness analysis is also done for the PID and the FOPID controllers.     

Fractional order [proportional derivative] controller for a class of fractional order systems

Recently, fractional order systems (FOS) have attracted more and more attention in various fields. But the control design techniques available for the FOS suffer from the lack of direct systematic approaches. In this paper, we focus on a given type of simple model of FOS. A fractional order [proportional derivative] (FO-[PD]) controller is proposed for this class of FOS, and a practical and systematic tuning procedure has been developed for the proposed FO-[PD] controller synthesis. The fairness issue in comparing with other controllers such as the traditional integer order PID (IO-PID) controller and the fractional order proportional derivative (FO-PD) controller has been addressed under the same number of design parameters and the same specifications. Fair comparisons of the three controllers (i.e., IO-PID, FO-PD and FO-[PD]) via the simulation tests illustrate that, the IO-PID controller designed may not always be stabilizing to achieve flat-phase specification while both FO-PD and FO-[PD] controllers designed are always stabilizing. Furthermore, the proposed FO-[PD] controller outperforms FO-PD controller for the class of fractional order systems.     

Design of a fractional order PID controller for an AVR using particle swarm optimization

Application of fractional order PID (FOPID) controller to an automatic voltage regulator (AVR) is presented and studied in this paper. An FOPID is a PID whose derivative and integral orders are fractional numbers rather than integers. Design stage of such a controller consists of determining five parameters. This paper employs particle swarm optimization (PSO) algorithm to carry out the aforementioned design procedure. PSO is an advanced search procedure that has proved to have very high efficiency. A novel cost function is defined to facilitate the control strategy over both the time-domain and the frequency-domain specifications. Comparisons are made with a PID controller and it is shown that the proposed FOPID controller can highly improve the system robustness with respect to model uncertainties.     

A genetic-multivariable fractional order PID control to multi-input multi-output processes

A multivariable fractional order PID controller is designed and to get suitable coefficients for the controller, a genetic algorithm with a new topology to generate a new population is proposed. The three parts of the genetic algorithm such as reproduction, mutation, and crossover are employed and some variations in the methods are fulfilled so that a better performance is gained. The genetic algorithm is applied to design FOPID controllers for a multivariable process and the results are compared with the responses of a H_∞ based multivariable FOPID controller. The simulation responses show that in all cases, the genetic-multivariable FOPID controller has suitable performance, and the output of the system has a smaller error. Also, in the proposed method, variations in one output have a smaller effect on another output which is shown the ability of the proposed method to overcome the interaction in the multivariable processes.     

MIMO PID tuning via iterated LMI restriction

We formulate multi‐input multi‐output proportional integral derivative controller design as an optimization problem that involves nonconvex quadratic matrix inequalities. We propose a simple method that replaces the nonconvex matrix inequalities with a linear matrix inequality restriction, and iterates to convergence. This method can be interpreted as a matrix extension of the convex–concave procedure, or as a particular majorization–minimization method. Convergence to a local minimum can be guaranteed. While we do not know that the resulting controller is globally optimal, the method works well in practice, and provides a simple automated method for tuning multi‐input multi‐output proportional integral derivative controllers. The method is readily extended in many ways, for example, to the design of more complex, structured controllers. Copyright © 2015 John Wiley & Sons, Ltd.     

Robust adaptive control of a bio-inspired robot manipulator using bat algorithm

This paper proposes a novel adaptive fractional order PID sliding mode controller (AFOPIDSMC) using a Bat algorithm to control of a Caterpillar robot manipulator. A fractional order PID (FOPID) control is applied to improve both trajectory tracking and robustness. Sliding mode controller (SMC) is one of the control methods which provides high robustness and low tracking error. Using hybridization, a new combined control law is proposed for chattering reduction by means of FOPID controller and high trajectory tracking through using SMC. Then, an adaptive controller design motivated from the SMC is applied for updating FOPID parameters. A metaheuristic approach, the Bat search algorithm based on the echolocation behavior of bats is applied for optimal design of the Caterpillar robot in order to tune the parameter AFOPIDSMC controllers (BA-AFOPIDSMC). To study the effectiveness of Bat algorithm, its performance is compared with five other controllers such as PID, FOPID, SMC, AFOPIDSMC and PSO-AFOPIDSMC. The stability of the AFOPIDSMC controller is proved by Lyapunov theory. Numerical simulation results completely indicate the advantage of BA-AFOPIDSMC for trajectory tracking and chattering reduction.     

Fractional Order PI‐PD Control of Liquid Level in Coupled Two Tank System and its Experimental Validation

This paper presents a level control problem of a coupled two tank single input single output (SISO) system. A cascade control strategy is adopted having a fractional order proportional integral (FOPI) controller and fractional order proportional derivative (FOPD) controller in the outer and the inner loops, respectively. Cascaded integer order proportional integral (IOPI) and integer order proportional derivative (IOPD) controllers are also designed to compare the performances. A frequency domain approach is followed to design all the controllers. It is mathematically shown that the FOPI and FOPD controllers can achieve less steady state error and consume less energy than that of the IOPI and IOPD controllers while meeting the same phase margin and gain crossover frequency. All propositions are validated on an experimental setup.     

Optimum Design of Fractional Order Pid Controller Using Chaotic Firefly Algorithms for a Control CSTR System

A fractional‐order PID controller is a generalization of a standard PID controller using fractional calculus. Compared with the standard PID controller, two adjustable variables, “differential order” and “integral order”, are added to the PID controller. Fractional‐order PID is more flexible, has better responses, and the precise adjustment closed‐loop system stability region is larger than that of a classic PID controller. But the design and stability analysis is more complicated than for the PID controller. Therefore, the optimal setting of parameters is very important. A firefly algorithm in standard mode has only local optimization and accuracy is low. In order to fix this flaw an improved chaotic algorithm firefly is proposed for a design controller FOPID. To evaluate the performance of the proposed controller, it has been used in the control of a CSTR system with a variety of fitness functions. Simulations confirm the optimal performance of the proposed controller.     

Optimal design of fractional order PID controller for time-delay systems: an IWLQR technique

ABSTRACT

In this paper, an optimal design based state feedback gain of fractional order proportional integral derivative (PID) controller for time delay system is proposed. The proposed optimal design is called as IWLQR, which will be the joined execution of both the invasive weed optimization (IWO) and linear quadratic regulator (LQR). The proposed technique modifies a fractional order proportional integral derivative (FOPID) regulator among a high order time delay scheme that achieves an elevated performance for a wide area. In the proposed methodology, the gain of the FOPID controller is tuned to achieve the desired responses which are determined using the LQR theory and the weight matrices of the LQR is anticipated with the assistance of IWO technique. The uniqueness of the projected technique is to reduce the fault in a PID regulator among the higher order time delay scheme by the aid of the increase limits of the regulator. The objective of the proposed control method is chosen in view of the set point parameters and the accomplished parameters from the time delay system. The projected method is employed to achieve the avoidance of high order time delay and the dependability restrictions such as tiny overrun, resolving time and fixed condition defect. This technique is carried out in MATLAB/Simulink platform and the results are separated by the earlier regulator junction representation like Z-N system, Wang technique, curve fitting technique, regression technique which illustrates the superior presentation of the anticipated abstaining in the existing work.     

A graphical tuning method of fractional order proportional integral derivative controllers for interval fractional order plant

In this paper, a novel graphical tuning method of fractional order proportional integral derivative (FOPID) controllers is proposed for a given interval fractional order plant family. Firstly, an approach is presented to solve the problem of robustly stabilizing the interval fractional order plant using FOPID controller. Moreover, some alternative methods are developed to reduce the computational burden of the presented approach. The results obtained here are general and strict proofs are given on these results. Secondly, a new approach is presented to calculate the complete sets of FOPID controller parameters which guarantee the specified H_∞-norm constraint for the interval fractional order plant. The developed approach is convenient and flexible. Finally, a unified design framework is proposed. The aim of the unified design is to compute the biggest region which can simultaneously provide internal stability, maintain the classical gain and phase margin and guarantee the modern H_∞-norm constraint for the interval fractional order plant. Examples are followed to illustrate the design procedure.     

LMI‐Based Robust PID Controller Design for Voltage Control of Islanded Microgrid

This paper presents the design of a robust proportional integral derivative (PID) controller for the control of a single phase microgrid voltage. A microgrid consists of loads, distributed generation units and several power‐electronics interfaced LC filter and voltage source inverter. These loads are unknown and parameters are uncertain which produce unmodeled load dynamics. This unmodeled load dynamics reduces the voltage tracking performance of the microgrid. The proposed controller gives the robustness of the system with unmodeled load dynamics. Under different kinds of uncertainties, PID controller guarantees the stability and provides zero steady‐state error and fast transient response. The robustness and optimal performance of the controller is obtained by using linear matrix inequality approach. The performance of the controller under different uncertainties is studied. Results indicate the robustness and high voltage tracking performance of the microgrid system.     

Developments of fuzzy PID controllers

Abstract: This paper describes the development and tuning methods for a novel self-organizing fuzzy proportional integral derivative (PID) controller. Before applying fuzzy logic, the PID gains are tuned using a conventional tuning method. At supervisory level, fuzzy logic readjusts the PID gains online. In the first tuning method, fuzzy logic at the supervisory level readjusts the three PID gains during the system operation. In the second tuning method, fuzzy logic only readjusts the proportional PID gain, and the corresponding integral and derivative gains are readjusted using the Ziegler–Nichols tuning method while the system is in operation. For the compositional rule of inferences in the fuzzy PID and the self-organizing fuzzy PID schemes two new approaches are introduced: the min implication function with the mean of maxima defuzzification method, and the max-product implication function with the centre of gravity defuzzification method. The fuzzy PID controller, the self-organizing fuzzy PID controller and the PID controller are all applied to a non-linear revolute-joint robot arm for step input and path tracking experiments using computer simulation. For the step input and path tracking experiments, the novel self-organizing fuzzy PID controller produces a better output response than the fuzzy PID controller; and in turn both controllers exhibit better process output than the PID controller.     

Feedback QoS control scheme for wireless network applications

Wireless LAN networking is an indispensable technology in an All-IP network architecture to satisfy the “anytime and anywhere” communication requirement of end users. This investigation proposes feedback controllers designing based on dynamic quality-of-service requirement for wireless LAN multimedia services. During the controllers design process, the time-domain is replaced by the s-domain, simplifying the calculation. This work presents three controllers namely proportional integral (PI), proportional derivative (PD) and proportional integral derivative (PID). Experimental results show that systems that employ the proposed controllers can quickly achieve the required system performance. Additionally, the PID controller has the best performance, and can improve delay performance by a rate 11.44% that without the feedback controller. The PI controller is superior to the PD controller. The delay when using the PD is 6.2% less than that achieved without the feedback controller.     

Analysis of grey wolf optimizer based fractional order PID controller in speed control of DC motor

Microsystem Technologies - The present work deals with comparative and robustness analysis of grey wolf optimization (GWO) based fractional order proportional–integral derivative (FOPID)...