基于自适应观测器的四旋翼无人飞行器传感器故障诊断方法

针对四旋翼无人飞行器传感器故障诊断问题,提出一种用于四旋翼无人飞行器加速度计和陀螺仪故障同时发生的故障检测与隔离以及故障偏差值估计的非线性诊断方法.首先,在建立飞行器动力学模型和传感器模型的基础上,构建四旋翼无人飞行器传感器故障检测与诊断系统.其次,利用故障观测器完成传感器故障的检测与隔离,基于Laypunov方法设计非线性自适应观测器对未知故障偏差值进行估计.最后,在传感器测量噪声存在的情况下,证明自适应律的稳定性和参数收敛性.实验结果表明,该方法能有效进行传感器的故障检测与隔离,实现对传感器故障偏差的估计与跟踪.     

Dissipativity-based distributed fault diagnosis for plantwide chemical processes

Most modern chemical processes consist of a number of process units interconnected with mass and energy flows, often with energy integration and materials recycle loops. As such, faults (process faults, actuator faults, or sensor faults) often propagate to multiple process units (subsystems), causing significant difficulties in fault diagnosis for plantwide systems. In this paper, a general distributed fault diagnosis approach is proposed for plantwide chemical processes, which takes into account the interactions among process units. The distributed fault diagnostic observers are designed to be sensitive to the local faults (local sensitivity) and insensitive to faults in other process units (remote faults insensitivity) and disturbances. The above requirements are formulated as plantwide dissipativity conditions and the gains for the distributed estimators and residual generators are obtained offline by solving a set of linear matrix inequalities. A case study of heat exchanger network is presented to demonstrate the effectiveness of the proposed approach.     

基于KPCA的HVAC系统传感器故障诊断

传感器状态的好坏很大程度上影响暖通空调(HVAC)系统的运行,对其展开故障诊断十分必要。核主成分分析(KPCA)方法通过集成算子与非线性核函数计算高维特性空间的主元成分,有效捕捉过程变量中的非线性关系,将其用于传感器常见4种故障的诊断,先用Q统计量进行故障监测,再用T2贡献量百分比变化来识别故障。实验结果表明:KPCA方法具有很好的故障监测与诊断能力。     

General modeling for model-based FDD on building HVAC system

Fault detection and diagnosis (FDD) can be realized with models. It can be used to find the cause of the degradation on energy efficiency and indoor climate quality in building heating, ventilation and air-conditioning (HVAC) systems. Real buildings are diverse. It requires a general modeling method. General modeling concept comprises three steps: hierarchical modeling procedure, parameterization and tuning procedure. In the procedure of hierarchical modeling, the process is split into levels ranging from global to micro level. The objective is to detect faults on the various levels. Consequently, different models for each level should be built. It is important to increase the accuracy of the models and let the models applicable for FDD on building HVAC systems. Parameterization and tuning procedure are necessary. An example model for a real air-conditioned room shows the results of general models and the results after tuning.     

加权k最近邻重构分析的工业过程故障诊断

k--最近邻(k--nearest neighbor, k--NN)是一种有效的基于数据驱动的故障检测方法, 该方法在工业过程监视方面已经得到了广泛的应用. 但在过程中存在故障时, 精确地寻找故障根源和识别故障变量是故障诊断的重要目标, 也是保证工业过程安全生产的重要任务. 本文在k--NN故障检测技术的基础上, 提出了一种加权的k--NN重构方法, 对使控制指标减小最大(maximize reduce index, MRI)的过程变量依次进行重构, 进而确定发生故障的传感器. 根据理论分析并结合数值仿真对提出的方法进行了验证, 数值仿真先从精度方面验证了该方法能够有效地对故障传感器数值进行重构, 然后验证了该方法不仅适用于单一传感器 故障诊断, 对于同时发生或者因变量相关性而传播的传感器故障也具有很好的效果. 最后, 该方法被成功应用于TE(Tennessee Eastman)化工过程.     

Quadrotor Sensor Fault Diagnosis with Experimental Results

This paper presents a fault detection, isolation, and estimation scheme for sensor bias faults in accelerometer and gyroscope measurements of quadrotor unmanned air vehicles (UAVs). Based on sliding-mode observer techniques, a robust estimation of the quadrotor roll and pitch angles is obtained by using only accelerometer measurements. Then, a diagnostic scheme is developed for detecting, isolating, and estimating sensor bias faults in the gyroscope and accelerometer measurements. Structured residuals are generated, allowing the detection and isolation of multiple simultaneous sensor faults under consideration. After the faults are detected and isolated, two nonlinear estimators are employed to provide an estimate of the unknown fault magnitude. The stability and estimation performance properties of the nonlinear estimators are established. The sensor fault diagnosis algorithm is implemented and evaluated through experimental results using a real-time indoor quadrotor test environment.     

航空发动机气路故障诊断

介绍了航空发动机气路故障诊断基准参数的选取和监测参数偏差的产生方法,探讨了采用故障相似系数进行气路故障隔离和辨识的方法,并用某型涡扇发动机实测数据验证了该方法的有效性.相似系数不仅具有明确的物理意义,而且使得故障诊断系统构造简便,故障模式扩展容易.采用相似系数进行故障模式隔离不必要求监测参数的个数大于故障模式个数.在隔离故障模式的基础上,进一步辨识发动机部件性能衰退程度,对气路故障的诊断更为深入.     

基于自适应观测器的四旋翼无人飞行器多传感器故障诊断方法

为了实现对四旋翼无人飞行器多传感器故障检测与诊断,提出一种基于自适应观测器的多传感器故障诊断方法。首先,在建立飞行器动力学模型和传感器模型的基础上,将传感器故障视为虚拟执行器故障,构建四旋翼无人飞行器多传感器故障检测与诊断系统;其次,设计非线性观测器实现多故障检测和与隔离,基于Laypunov方法设计非线性自适应观测器实现对多故障偏差值的估计;最后,在传感器测量噪声存在的情况下,证明自适应律的稳定性和参数收敛性。实验结果表明,该方法能有效进行多传感器的故障检测与隔离,实现对多传感器故障偏差的同时估计与跟踪。     

Distributed fault diagnosis for process and sensor faults in a class of interconnected input–output nonlinear discrete-time systems

This paper presents a distributed fault diagnosis scheme able to deal with process and sensor faults in an integrated way for a class of interconnected input–output nonlinear uncertain discrete-time systems. A robust distributed fault detection scheme is designed, where each interconnected subsystem is monitored by its respective fault detection agent, and according to the decisions of these agents, further information regarding the type of the fault can be deduced. As it is shown, a process fault occurring in one subsystem can only be detected by its corresponding detection agent whereas a sensor fault in a subsystem can be detected by either its corresponding detection agent or the detection agent of another subsystem that is affected by the subsystem where the sensor fault occurred. This discriminating factor is exploited for the derivation of a high-level isolation scheme. Moreover, process and sensor fault detectability conditions characterising quantitatively the class of detectable faults are derived. Finally, a simulation example is used to illustrate the effectiveness of the proposed distributed fault detection scheme.     

Fault detection and isolation for nonlinear systems via high‐order‐sliding‐mode multiple‐observer

In this paper, fault detection and isolation problems are studied for a certain class of nonlinear systems. Under some structural conditions, multiple high‐order sliding‐mode observers are proposed. The value of the equivalent output injection is used for detecting faults and the multiple‐model approach for isolating particular faults in the system. The proposed method provides fast detection and isolation of actuator and plant faults. Simulation results support the proposed approach. Copyright © 2014 John Wiley & Sons, Ltd.     

Fuzzy model-based fault detection and diagnosis for a pilot heat exchanger

This article addresses the design and real-time implementation of a fuzzy model-based fault detection and diagnosis (FDD) system for a pilot co-current heat exchanger. The design method is based on a three-step procedure which involves the identification of data-driven fuzzy rule-based models, the design of a fuzzy residual generator and the evaluation of the residuals for fault diagnosis using statistical tests. The fuzzy FDD mechanism has been implemented and validated on the real co-current heat exchanger, and has been proven to be efficient in detecting and isolating process, sensor and actuator faults.     

基于定性趋势分析的空调系统传感器故障检测

提出了基于定性趋势分析的空调系统传感器故障检测方法。该方法将空调系统中信号相似的传感器分成一组,利用组中信号间的趋势相似性进行故障检测。采集了空调系统的传感器数据,对传感器偏置故障和漂移故障进行仿真实验,结果表明,该方法能检测传感器的偏置故障和漂移故障。     

空调系统的能耗诊断与故障自动检测研究

对空调系统的能耗诊断及故障诊断,本着科学、合理、实用的原则,提出了一种用于指导空调系统能耗诊断与故障诊断的方法体系。此方法体系的建立可以定性、定量地评价空调系统的实际运行特性,从而提高系统的综合特性。     

基于不确定观测下离散事件系统可诊断性的研究

在实际应用系统中,由于传感器故障、传感器限制和网络中的数据包丢失等原因,事件的可观测值变得不确定,使得观测系统行为变得尤为复杂。针对离散事件系统中,同个事件串可能有多个观测值以及不同状态下同个事件观测值也可能不同的问题,提出一种不确定观测下故障诊断验证的方法。首先对不确定观测的离散事件系统的可诊断性进行形式化,然后构建出用于上述故障诊断验证的验证器;基于验证器提出了系统基于不确定观测下可诊断的充要条件及验证算法;最后,实例说明不确定观测下故障诊断验证算法的应用。与现有研究相比,提出的方法对故障事件的观测值没有约束,可以为0个或多个观测值,使此方法应用的场景更为广泛。     

一种滑模观测器的多故障诊断方法

针对非线性系统的执行器故障及传感器故障,提出一种鲁棒多故障检测方法．首先,对可能发生的每种执行器故障分别构造模型,并设计相应的滑模观测器用于残差生成,从而实现执行器故障检测．然后,设计一种算法,利用简单滤波器将传感器故障转换为执行器故障,从而直接利用执行器故障检测的方法实现传感器故障的检测,将执行器故障的检测方法推广到执行器、传感器故障同时存在的情况．最后,通过在单关节机械手中的仿真应用验证了所提方法的有效性．     

一类带有传染器故障的混合系统的容错控制

A model-based fault tolerant control approach for hybrid linear dynamic systems is proposed in this paper. The proposed method, taking advantage of reliable control, can maintain the performance of the faulty system during the time delay of fault detection and diagnosis (FDD) and fault accommodation (FA), which can be regarded as the first line of defence against sensor faults.Simulation results of a three-tank system with sensor fault are given to show the efficiency of the method.     

无线传感器网络故障诊断与容错控制研究进展

可靠性和可持续性是无线传感器网络(WSNs)研究的重要问题。从拓扑、能量、监测和安全等角度对WSNs故障诊断和容错控制方法进行详细的归纳和总结。对WSNs故障类型进行了划分,主要分为节点故障和网络故障,根据WSNs体系结构,介绍了节点自诊断、网络诊断和基站诊断3种故障诊断方法,阐述了相关的容错控制技术,包括冗余机制、多路由设计、动态拓扑控制、传输协议优化、数据融合和智能方法。对WSNs容错控制技术目前存在的问题与未来发展趋势进行了探讨。     

一类带有传感器故障的混合系统的容错控制

A model-based fault tolerant control approach for hybrid linear dynamic systems is proposed in this paper. The proposed method, taking advantage of reliable control, can maintain the performance of the faulty system during the time delay of fault detection and diagnosis (FDD) and fault accommodation (FA), which can be regarded as the first line of defence against sensor faults. Simulation results of a three-tank system with sensor fault are given to show the efficiency of the method.     

A sliding mode observer-based strategy for fault detection,isolation, and estimation in a class of Lipschitz nonlinear systems

This article investigates the design and application of a sliding mode observer (SMO) strategy for actuator as well as sensor fault detection, isolation, and estimation (FDIE) problem for a class of uncertain Lipschitz nonlinear systems. Actuator FDIE is addressed by regrouping the system's inputs into a structure suitable for SMO design. Similarly, by filtering the regrouped outputs, a similar system structure can be developed for sensor FDIE problem. Once in the suitable form and under certain assumptions, nonlinear SMOs are proposed for actuator and sensor FDIE. A systematic LMI-based design approach for the proposed SMO is presented. Additionally, the article addresses four problems, namely: (P1) What are the conditions for isolating single and/or multiple faults? (P2) What is the maximum number of faults that can be isolated simultaneously? (P3) How should one design SMO-based FDI approach in order to achieve multiple fault isolation using as few observers as possible? (P4) How can one estimate the shape of the faults? To solve the above problems, a new concept called fault isolation index (FIX) is proposed for actuator and sensor FDIE. It is proved that fault isolation can only be achieved if FIX?≠?0, and also that the maximum number of faults that can be isolated is equal to FIX. Using the proposed fault isolation strategy and by treating some healthy inputs or outputs as unknown inputs, a systematic FDIE design scheme using a bank of nonlinear SMOs, which provides a solution for the four problems is provided. An example is used to illustrate the proposed ideas. The simulation results show that the proposed FDIE scheme can successfully detect and isolate both slowly and fast-changing actuator faults. It is also shown that accurate estimation of actuator faults can be achieved.