Adaptive backstepping sliding mode control with tuning functions for nonlinear uncertain systems

An adaptive backstepping tuning functions sliding mode controller is proposed for a class of strict-feedback nonlinear uncertain systems. In this control design, adaptive backstepping is used to deal with unknown or uncertain parameters and the matching condition restricting the Lyapunov based design. The main drawback of the Lyapunov based adaptive backstepping which is the overparametrisation is eliminated by the tuning functions. The adaptive backstepping tuning functions design is combined with the sliding mode control in order to overcome quickly varying parametric and unstructured uncertainties, and to obtain chattering free control. The proposed controller not only provides robustness property against uncertainty but also copes with the overparametrisation problem. Experimental results of the proposed controller are compared with those of the standard sliding mode controller. The proposed controller exhibits satisfactory transient performance, good estimates of the uncertain parameters, and less chattering.     

一类非线性系统的间接自适应模糊滑模控制

基于启发式知识的模糊控制是一种解决非线性系统控制问题的有效方法。然而其设计缺乏系统性,并且系统的稳定性和鲁棒性难以保证。本文利用滑模控制的概念和Lyapunov综合方法提出一种针对一类非线性系统的间接自适应模糊滑模控制（IAFSMC）方法。仿真研究表明即使在缺少系统先验知识和不确定性干扰的情况下,系统性能也十分理想。     

改进非线性干扰观测器的机械臂自适应反演滑模控制

针对传统滑模和传统干扰观测器在机械臂关节位置跟踪中存在的控制输入抖振、需要测量加速度项、应用模型受限等问题,提出一种改进非线性干扰观测器的机械臂自适应反演滑模控制算法。首先,设计改进的非线性干扰观测器进行在线测试,在滑模控制律中加入干扰估计值对可观测的干扰进行补偿;然后选择合适的设计参数,使观测误差指数型收敛;其次,引入反演自适应控制律,对不可观测的干扰进行估计,进一步改善控制系统的跟踪性能;最后,利用李雅普诺夫函数验证了闭环系统的渐近稳定性,并将其应用于机械臂关节位置跟踪。实验结果表明,与传统滑模算法比较,所提控制算法不但加快了系统的响应速度,而且能有效地削弱系统抖振、避免测量加速度项并扩大应用模型使用范围。     

Integrated fault estimation and fault‐tolerant control for uncertain Lipschitz nonlinear systems

This paper proposes an integrated fault estimation and fault‐tolerant control (FTC) design for Lipschitz non‐linear systems subject to uncertainty, disturbance, and actuator/sensor faults. A non‐linear unknown input observer without rank requirement is developed to estimate the system state and fault simultaneously, and based on these estimates an adaptive sliding mode FTC system is constructed. The observer and controller gains are obtained together via H_∞ optimization with a single‐step linear matrix inequality (LMI) formulation so as to achieve overall optimal FTC system design. A single‐link manipulator example is given to illustrate the effectiveness of the proposed approach. Copyright © 2016 John Wiley & Sons, Ltd.     

基于扩张状态观测器的UCAV自适应滑模控制

针对固定翼UCAV（Unmanned Combat Aerial Vehicle）系统中存在的不确定性和外部扰动，设计了一种基于扩张状态观测器的自适应超扭曲滑模控制器用来抑制系统扰动，从而提高对于UCAV的控制性能。建立固定翼UCAV的六自由度非线性模型，针对姿态控制和速度控制分别设计扩张状态观测器对模型中难以精确测量的状态量和外部扰动进行估计，依据奇异摄动原理分别对姿态和速度设计自适应超扭曲滑模控制器，实现对UCAV的姿态和速度的跟踪控制。采用某型固定翼UCAV非线性模型对所设计的控制器进行仿真验证，并且与传统的自抗扰滑模控制方法进行了对比，仿真结果表明，基于扩张状态观测器的自适应超扭曲滑模控制器具有更小的超调量和稳态误差。     

一类非线性系统的Terminal滑模控制

首先结合Terminal滑模控制的基本思想,即突破以往的线性滑动面,将非线性项引入到滑动面设计中,使得系统处于滑动模态阶段时,状态变量能够在"有限时间内"收敛至平衡点,给出了适用于高阶非线性系统的Terminal滑动面设计方法,基于Lyapunov稳定性理论得出了相应的控制器.进一步考虑系统参数摄动和外界扰动等不确定性因素上界的未知性,用Lyapunov稳定性方法给出了一个带有未知性上界参数估计的自适应Terminal滑模控制器.     

Intelligent adaptive observer-based optimal control of overhead transmission line de-icing robot manipulator

In cold season, wet snow ice accretion on overhead transmission lines increases wind load effects which in turn increases line tension. This increased line tension causes undesirable effects in power systems. This paper discusses the design of an observer-based boundary sliding mode control (BSMC) for 3 DOF overhead transmission line de-icing robot manipulator (OTDIRM). A robust radial basis functional neural network (RBFNN) observer-based neural network (NN) controller is developed for the motion control of OTDIRM, which is a combination of BSMC, NN approximation and adaptation law. The RBFNN-based adaptive observer is designed to estimate the positions and velocities. The weights of both NN observer and NN approximator are tuned off-line using particle swarm optimization. Using Lyapunov analysis the closed loop tracking error was verified for a 3 DOF OTDIRM. Finally, the robustness of the proposed neural network-based adaptive observer boundary sliding mode control (NNAOBSMC) was verified against the input disturbances and uncertainties.     

Adaptive robust controller based on integral sliding mode concept

ABSTRACT

This paper proposes, for a class of uncertain nonlinear systems, an adaptive controller based on adaptive second-order sliding mode control and integral sliding mode control concepts. The adaptation strategy solves the problem of gain tuning and has the advantage of chattering reduction. Moreover, limited information about perturbation and uncertainties has to be known. The control is composed of two parts: an adaptive one whose objective is to reject the perturbation and system uncertainties, whereas the second one is chosen such as the nominal part of the system is stabilised in zero. To illustrate the effectiveness of the proposed approach, an application on an academic example is shown with simulation results.     

基于混合滑模控制器和反正切观测器的SPMSM直接转矩控制

针对基于传统PI控制的表贴式永磁同步电机(SPMSM)直接转矩控制系统抖振和相位延迟等问题,在转速环节设计新型趋近律,采用模糊自适应方法,实现趋近律参数的动态调节,并通过Lyapunov方法证明稳定性.利用super-twisting滑模策略生成参考电压矢量,完成混合滑模控制器的设计,建立基于反正切函数的滑模观测器,并对转子位置进行合理补偿.仿真实验表明,与PI控制、基于指数趋近律的滑模控制器相比,所设计的控制器在电机空载起动和外加干扰情况下均能有效提高系统响应,显著降低抖振,与其他模型参考自适应观测器相比,所设计观测器能有效减小相位延迟,转子位置辨识结果更准确.     

基于二阶运动学模型的移动机器人主从跟踪系统的鲁棒控制

In this paper, we study the problem of modeling and controlling leader-follower formation of mobile robots. First, a novel kinematics model for leader-follower robot formation is formulated based on the relative motion states between the robots and the local motion of the follower robot. Using this model, the relative centripetal and Coriolis accelerations between robots are computed directly by measuring the relative and local motion sensors, and utilized to linearize the nonlinear system equations. A formation controller, consisting of a feedback linearization part and a sliding mode compensator, is designed to stabilize the overall system including the internal dynamics. The control gains are determined by solving a robustness inequality and assumed to satisfy a cooperative protocol that guarantees the stability of the zero dynamics of the formation system. The proposed controller generates the commanded acceleration for the follower robot and makes the formation control system robust to the effect of unmeasured acceleration of the leader robot. Furthermore, a robust adaptive controller is developed to deal with parametric uncertainty in the system. Simulation and experimental results have demonstrated the effectiveness of the proposed control method.     

A nonlinear sliding surface to improve performance of a discrete-time input-delay system

A sliding mode controller is proposed for an uncertain input-delay system to enhance performance. A nonlinear sliding surface is proposed to achieve better transient response for general uncertain discrete SISO linear systems with input delay. Both matched and unmatched perturbations are considered and ultimate boundedness of motion is proved. The step tracking problem is analysed. The proposed surface increases the damping ratio of the transformed system (delay free) as the output moves nearer to the setpoint. To simplify the surface design, a linear matrix inequality based tuning procedure is proposed. The control law is designed based on an equivalent control approach which guarantees one step reaching. The scheme is able to achieve low overshoot and low settling time simultaneously which is not possible with a linear sliding surface. Simulation results verify the effectiveness of the proposed nonlinear surface over different linear surfaces.     

An H∞non‐fragile observer‐based adaptive sliding mode controller design for uncertain fractional‐order nonlinear systems with time delay and input nonlinearity

In this paper the problem of non‐fragile adaptive sliding mode observer design is addressed for a class of nonlinear fractional‐order time‐delay systems with uncertainties, external disturbance, exogenous noise, and input nonlinearity. An H_∞ observer‐based adaptive sliding mode control considering the non‐fragility of the observer is proposed for this system. The sufficient asymptotic stability conditions are derived in the form of linear matrix inequalities. It is proven that the sliding surface is reachable in finite time. An illustrative example is provided which corroborates the effectiveness of the theoretical results.     

基于AFSMC算法的飞机飞行姿态自适应滑模控制系统

传统飞机飞行姿态滑膜控制系统,存在飞机飞行姿态自适应系数稳定性差的问题,在控制过程中会受到多重因素影响,导致飞行姿态可控误差系数增大,需要辅助控制系统修正才能完成飞行姿态的控制操作;针对上述问题,提出基于AFSMC算法的飞机飞行姿态自适应滑模控制系统;系统硬件基于PID自适应滑模控制器,对飞机飞行姿态控制器进行结构设计;软件部分通过引入自适应滑模控制策略,对PID控制器姿态控制变量进行适配;引入AFSMC算法计算姿态控制器当前时间点下的运动控制方程,得到飞行姿态自适应滑模控制的最优量,完成基于AFSMC算法的飞机飞行姿态自适应滑模控制系统设计;实验结果表明,所设计系统能够在不同飞行工况下,对飞机飞行姿态作出准确控制,系统的整体控制精度范围为90%~97.4%,飞机飞行控制稳定性较好,有效提升了系统对飞机飞行姿态的控制准确度。     

Adaptive Terminal Sliding Mode Control for Motion Tracking of a Micropositioning System

This paper presents the design of a novel adaptive terminal sliding mode controller (ATSMC) and its application to motion tracking control of a piezoelectric‐driven micropositioning system. A nonsingular terminal sliding surface is used to achieve fast and finite‐time convergence for the trajectory tracking, and also to avoid the singularity phenomenon in traditional terminal sliding mode design. An adaptive gain law is developed to update the gain of the proposed controller and to provide stable and chattering‐free control action. The stability of the control system has been demonstrated in the sense of Lyapunov. The ATSMC scheme is established based on the output feedback only, which does not require a state observer and facilitates an easy implementation. The proposed controller is implemented on a field‐programmable gate array (FPGA) platform. Comparison study with three conventional controllers has been conducted. Experimental results show the feasibility and effectiveness of the proposed control strategy.     

Adaptive sliding mode controller based on super-twist observer for tethered satellite system

ABSTRACT

In this work, the sliding mode control based on the super-twist observer is presented. The parameters of the controller as well as the observer are admitted to be time-varying and depending on available current measurements. In view of that, the considered controller is referred to as an adaptive one. It is shown that the deviations of the generated state estimates from real state values together with a distance of the closed-loop system trajectories to a desired sliding surface reach a μ-zone around the origin in finite time. The application of the suggested controller is illustrated for the orientation of a tethered satellite system in a required position.     

基于滑模观测器的多智能体一致性控制

本文针对速度不可测下的多智能体系统提出一种基于滑模观测器的有限时间一致性控制算法.首先, 利用滑模观测器在有限时间内估计每个智能体的速度信息. 然后,利用估计信息设计非奇异终端滑模控制律,该控制律能够保证智能体系统在有限时间内达到一致性. 最后,通过数值仿真验证了该一致性控制算法的有效性.     

A sliding mode observer design for uncertain fractional Ito stochastic systems with state delay

This paper addresses the robust observer design problem for uncertain time-delay fractional Ito stochastic systems. A sliding surface is proposed and it is shown that state estimates converge towards it and remain there for the subsequent time. Additionally, by constructing a novel Lyapunov functional, a sufficient condition for the stability of the sliding motion of the estimated states is given in the form of Linear Matrix Inequalities (LMIs). It is demonstrated that the state estimates are stabilizable in probability provided that the LMI is feasible. Moreover, a finite-time sliding mode control law based on the estimated states is proposed. Simulation examples are given to show the validity and effectiveness of the results.     

High-order sliding mode observers and integral backstepping sensorless control of IPMS motor

This paper presents a robust high-order sliding mode interconnected observer and an integral backstepping controller for a sensorless interior permanent magnet synchronous motor. To limit the chattering phenomenon on the observed state, a super twisting algorithm is combined with an interconnected observer to design a new high-order sliding mode observer which will be used for multiple-input multiple-output systems. The proposed observer is used to estimate in finite time the rotor position, the speed and the stator resistance. Moreover, a robust nonlinear controller based on the backstepping algorithm is designed where integral actions are introduced step by step. This controller allows to track a desired reference which is computed by using a maximum-torque-per-ampere strategy. Simulation results are shown to illustrate the performance of the proposed scheme by using significant trajectories including the zero speed and under parametric uncertainties.     

Adaptive Reinforcement Learning Strategy with Sliding Mode Control for Unknown and Disturbed Wheeled Inverted Pendulum

This paper develops a novel adaptive integral sliding-mode control (SMC) technique to improve the tracking performance of a wheeled inverted pendulum (WIP) system, which belongs to a class of continuous time systems with input disturbance and/or unknown parameters. The proposed algorithm is established based on an integrating between the advantage of online adaptive reinforcement learning control and the high robustness of integral sliding-mode control (SMC) law. The main objective is to find a general structure of integral sliding mode control law that can guarantee the system state reaching a sliding surface in finite time. An adaptive/approximate optimal control based on the approximate/adaptive dynamic programming (ADP) is responsible for the asymptotic stability of the closed loop system. Furthermore, the convergence possibility of proposed output feedback optimal control was determined without the convergence of additional state observer. Finally, the theoretical analysis and simulation results validate the performance of the proposed control structure.

     

一种球形滚动机器人的路径跟踪控制器设计

对一种球形滚动机器人的路径跟踪问题进行研究,设计一种基于自适应滑模控制策略的路径跟踪控制器。所设计的路径跟踪控制器采用鲁棒滑模自适应增益控制律,能够有效实现带有扰动和不确定性的实际球形滚动机器人的路径跟踪。推导球壳纯滚动和无自转非完整约束下球形滚动机器人的运动方程,并在此基础上设计自适应滑模路径跟踪控制器。对于给定的参考几何路径,所设计的路径跟踪控制器能够确保路径跟踪误差在有限时间内收敛至很小的零邻域内。基于Lyapunov稳定性理论证明了闭环控制系统的稳定性,数值仿真与样机实验结果进一步验证了所设计的路径跟踪控制器的有效性。