Effects of fibre grating parameters on the spectral characteristics of cascaded long- and short-period gratings

Using coupled-mode theory combined with the transfer matrix method, this paper presents the impact of fibre grating parameters(grating period, grating length and average index modulation) and the separation between long-period fibre grating and fibre Bragg grating (FBG) on the reflection spectra of cascaded long-and short-period grating (CLBG). Two grating periods and two grating lengths have only impact on the two reflection peaks. The two resonance wavelengths shift towards the longer wavelength when the period of FBG decreases. Further, we study the sensing characteristics of coated CLBG. By analysing the relationship between the refractive index sensitivity and the thin film parameters (film refractive index and film thickness), the optimized parameters for the coated CLBG used as film sensor were obtained. Data simulation shows that the resolution of the refractive index of this coated CLBG film sensor is predicted to be 10^?6. This implies that the coated CLBG has an important application value in sensing and measurement field.     

Physical observation of single step UV-written integrated planar Bragg structures and their application as a refractive-index sensor

We present what is to our knowledge the first demonstration of a potentially low-cost refractive-index sensor based on UV processing. A channel waveguide and a Bragg grating are defined in a single UV processing step, resulting in a buried structure with a well-defined grating period. A subsequent wet etch process located over the Bragg grating opens a sensing window in the device and reveals the grating structure. Sensitivity of as much as 5 x 10(-6) was inferred from our device.     

Simultaneous strain and temperature measurement using a compact photonic crystal fiber inter-modal interferometer and a fiber Bragg grating

An all-fiber sensor scheme for simultaneous strain and temperature measurement is presented. The sensing head is formed by serially connecting a polarization maintaining photonic-crystal-fiber-based inter-modal interferometer (IMI) with a fiber Bragg grating (FBG). The IMI, exhibiting an opposite strain response as compared to that of the FBG, is highly sensitive to strain, while it is insensitive to temperature. This has potential for improving the strain and temperature measurement resolutions. A sensor resolution of ±8.3 με in strain and ±2 °C in temperature are experimentally achieved within a strain range of 0-957.6 με and a temperature range of 24 °C-64 °C, respectively.     

Sensitivity enhancement of grating interferometer based two-dimensional sensor arrays using two-wavelength readout

Diffraction gratings integrated with microelectromechanical systems (MEMS) sensors offer displacement measurements with subnanometer sensitivity. However, the sensitivity of the interferometric readout may drop significantly based on the gap between the grating and the reference surface. A two-wavelength (2-λ) readout method was previously tested using a single MEMS sensor for illustrating increased displacement measurement capability. This work demonstrates sensitivity enhancement on a sensor array with large scale parallelization (~20,000 sensors). The statistical representation, which is developed to model sensitivity enhancement within a grating based sensor array, is supported by experimental results using a thermal sensor array. In the experiments, two lasers at different wavelengths (633 and 650 nm) illuminate the thermal sensor array from the backside, time-sequentially. The diffracted first order light from the array is imaged onto a single CCD camera. The target scene is reconstructed by observing the change in the first diffracted order diffraction intensity for both wavelengths. Merging of the data from two measurements with two lasers was performed by taking the larger of the two CCD measurements with respect to the reference image for each sensor. ~30% increase in the average sensitivity was demonstrated for a 160×120 pixel IR sensor array. Proposed architecture is also applicable to a variety of sensing applications, such as parallel biosensing and atomic force microscopy, for improved displacement measurements and enhanced sensitivity.     

基于双模LPFG折射率不敏感双参量传感器

环境折射率和环境温度变化是影响光纤应变测量误差的主要因素.本文利用双模光纤纤芯双模式(LP01和LP11)支持特性设计了一款环境折射率不敏感的双模光纤(DMF)长周期光纤光栅LPFG)应变传感器.设计了传感器模型结构,制作了最优化参数的传感器样品.实验测试了DMF-LPFG传感结构对外部环境中应变、温度和折射率的响应....     

Self-pumped phase-conjugate interferometer with a photorefractive iron-doped lithium-niobate crystal

A single object wave is amplitude divided by a beam splitter into two waves of equal intensity that are made to interfere at the back surface of an iron-doped lithium-niobate crystal so that the normal to the back surface is the angular bisector of the input waves. The interference results in the formation of a phase grating (Bragg grating) in the volume of the crystal. These waves are diffracted at the Bragg grating on both the front focal plane and the back focal plane of the crystal. The wave diffracted in the back focal plane from the Bragg grating and counterpropagating to the incident wave is observed to be the phase conjugate of the input object wave. The wave diffracted in the front focal plane of the Bragg grating is incorporated into the design of an interferometer to measure a specific in-plane displacement of the object wave. It is theoretically evaluated and experimentally demonstrated that interferometers such as those that incorporate conjugate-wave pairs are highly sensitive.     

Simultaneous temperature and strain measurements performed by a step-changed arc-induced long-period fiber grating

A compact sensor based on step-changed arc-induced long-period fiber gratings was implemented to discriminate between temperature and strain. The proposed sensor consists of a single long-period grating with two sections written consecutively in the SMF-28 fiber using the electric arc discharge technique. The two sections have the same period but different fabrication parameters. The operation of the sensor relies on the existence of a difference between the values of temperature and strain sensitivity of two neighboring resonances observed in the spectrum of the step-changed grating. The temperature and strain resolutions obtained for the sensor are 0.2 degrees C and 35 micro epsilon, respectively.     

Fabrication of a distributed-feedback dye laser with a grating structure in its plastic waveguide

Two approaches of fabricating grating structures for waveguided plastic dye lasers are described and compared for lasing performance. Rhodamine6G-doped poly(methyl methacrylate) (PMMA) film on a PMMA substrate was used for the waveguide, and a distributed-feedback (DFB) laser operation with a single-propagation mode was demonstrated. The performances of both types of permanent grating structured DFB dye laser were better than those of a DFB dye laser on a plain waveguide with a dynamic grating formed by the interference of two pump beams. Wide tuning range is expected by use of a multistripe DFB laser with different grating pitches.     

Autofocus laser rotary encoder

A laser incremental encoder with autofocus operation isproposed. In the encoder, an optical read head focuses three laserbeams upon a disk with a scaling grating. The scaling grating is areflection grating for which the height difference between adjacentpixels is one quarter of the wavelength of the laser. Each of thetwo laser beams is focused onto one of the two sections of thereflective grating, whereby the pitch of the grating can be detected byinterferometric reflection. The third beam acts to provideautofocus and is reflected from a smooth part between the two sectionsof the reflective grating. Therefore the encoder is less sensitiveto the gap between the optical read head and the scaling grating, andno precision adjustment is required. Also, the reading data arefree from the vibration and waviness of the grating surface. In theexperiments an encoder disk was fabricated from a wafer by lithographictechniques. The encoder with an 18-mm radius of the disk can reacha resolution of 2(16) = 65,536 pulses per revolution withoutelectronic interpolation.     

一种用于低频测量的光纤光栅振动传感器

利用光纤光栅敏感技术,设计了一种用于低频测量的光纤光栅振动传感器.该传感器采用了等强度悬臂梁作为振动传感元件,并在等强度悬臂梁的上下双面优化布置性能匹配的两个光纤光栅,一个为振动敏感测量光栅,另一个为信号匹配滤波解调光栅.该结构设计可以补偿温度的不利影响,同时也提高了传感器信号检测的灵敏度.实测结果表明,该传感器可以用于25 Hz以下的低频目标的振动测量.     

Dual-wavelength operation of a self-seeded dye laser oscillator

We demonstrate simultaneous dual-wavelength operation of a self-seeded dye laser. The laser cavity consists of one dye cell, two pairs of grating and tuning mirrors, and two reflecting mirrors. This configuration can be decomposed with two grazing-incidence cavities and a standing-wave cavity. The self-seeded dual-wavelength output beams are collinear and independently tunable. We were able to vary the output powers at the two wavelengths smoothly by changing the cavity length of a master oscillator.     

Tuning of external-cavity semiconductor lasers with chirped diffraction gratings

We present a novel scheme of tunable semiconductor laser based on the use of a chirped grating in an external cavity. The chirped grating is fabricated using a simple holographic technique: two Gaussian beams having wavefronts with different radii of curvature are brought to interfere on a photoresist layer. The tuning properties of chirped gratings have been investigated with semiconductor lasers operated with an external cavity. With this type of grating positioned in Littrow configuration, the wavelength selection can be done by translating the grating without any need to rotate it. This cavity configuration provides a tunable output beam with an angle of propagation that is independent of the wavelength. The translation of chirped gratings was shown to tune a visible diode laser and an infrared diode laser over the same spectral band as the conventional tuning scheme where an unchirped grating is rotated.     

Combined time- and wavelength-division-multiplexing demodulation technique of fiber grating sensor arrays using a tunable pulsed laser

Combined time- and wavelength-division-multiplexing demodulation technique of fiber Bragg grating (FBG) sensor arrays using a tunable pulsed laser is proposed and demonstrated. A tunable fiber laser based on a matched FBG is applied. The wavelengths of the sensing FBGs are obtained by detecting the maximum voltages with a photodiode that avoids the complex demodulation process. The advantages of this scheme are simple structure, high signal-to-noise ratio, and the sensing signals obtained by detecting the maximum voltages.     

Femtosecond laser-inscribed fiber Bragg gratings for strain monitoring in power cables of offshore wind turbines

A fiber Bragg grating sensor system used for monitoring the effects of strain on the power cable of an offshore wind turbine is presented. The Bragg grating structure was inscribed into coated nonphotosensitive standard telecommunication fibers using an IR femtosecond laser and the point-by-point writing technique. Because of the presence of the protective coating of the fiber, the mechanical stability of the resultant sensor device is better than that of a sensor consisting of a bare fiber. A system containing this sensing element was to our knowledge for the first time successfully installed and tested in an offshore wind turbine prototype (REpower 6M, REpower Systems, AG, Germany) in February 2010, near Ellh?ft (Germany). The fabrication process of the fiber Bragg gratings, measurement results of the online monitoring, and a comparison between the sensor signal and commonly used sensing techniques are presented.     

Reflectometric frequency-modulation continuous-wave distributed fiber-optic stress sensor with forward coupled beams

A distributed optical-fiber stress sensor whose principle of operation is based on the frequency-modulation continuous-wave technique is reported. The sensor consists of a length of birefringent fiber with a mirror attached to one end, a diode laser, and a p-i-n photodiode detector. The intensity and the location of an applied stress are determined simultaneously by detecting the amplitude and the frequency of the beat signal, which is produced by two forward-coupled mode beams. The system was found to have a reasonable spatial resolution of 0.85 m (rms error) in a sensing range of 100 m. The advantages and limitations of the sensor are also discussed.     

Smart MEMS Flow Sensor: Theoretical Analysis and Experimental Characterization

This paper presents analytical and experimental studies of a new microelectromechanical system (MEMS) smart flow sensor for the measurement of gas flow. The flow sensor has an array of curved-up cantilever beams that are surface-micromachined with two layers of deposition under two sets of different process parameters. The differential residual stress between the two layers of the polysilicon deposition causes the beams to curve upward from the substrate surface when the sacrificial layer is released. Each beam of the array of beams of different lengths vibrates successively as the flow rate increases, enabling more accurate sensing and identification of range of flow rates based on the vibration characteristics, thus making this a smart sensor design. Design and fabrication of these sensors are discussed. Experiments were conducted on this MEMS flow sensors to characterize the deflection of the curved cantilever beams with respect to flow rates. In addition, backflow tests were also conducted separately. Results of the analytical study are presented to investigate the cause of vibration of beams when subjected to flow. Finite-element analyses of vibration of the sensors comply with the experimental observation. Based on the analysis of fundamental natural frequencies, possible arrangement for the distribution of lengths of the beams is proposed to enhance its functionality as a sensor. Future work and plan of the on-board capacitive metrology and other practical issues are discussed     

Fiber-optic Faraday-effect magnetic-field sensor based on flux concentrators

The principles and performance of a fiber-optic Faraday-effect magnetic-field sensor designed around an yttrium-iron-garnet (YIG) sensing element and two flux concentrators are described. The system design exploits the technique of polarization-rotated reflection in which a single polarization-maintaining optical fiber links the sensor head to the optical source and detection system. In the sensing head, ferrite flux concentrators are magnetically coupled to the YIG sensing element to achieve maximum sensitivity. The system exhibits a noise equivalent field of 6 pT/√Hz and a 3-dB bandwidth of~10 MHz.     

A miniaturized sensor consisting of concentric metallic nanorings on the end facet of an optical fiber

A polarization-independent optical sensor is created by fabricating a concentric gold ring grating with a period of 900 nm on the end facet of an optical fiber. The sensing function of this miniaturized device is realized by sending white light as a probe to the gold rings and collecting the response signal in the back-reflection through the optical fiber. A pronounced peak due to the Rayleigh anomaly of the gold ring grating is observed in the reflection spectrum, the center wavelength of which is sensitive to the change in the environmental refractive index of the fiber end facet. Theoretical analysis not only shows excellent agreement with the experimental results, but also gives insights into the mechanisms of this kind of sensor. Using the center position of the Rayleigh peak as the response signal, a high sensitivity dλ/dn of 900 nm per unity refractive index is realized for this sensor and a resolution of Δn/n ≈ 1% is demonstrated in preliminary experiments. The sensitivity is solely determined by the period of the grating.     

A new ultra long-period fiber grating for measuring torsional characteristics

In this paper, we proposed a novel kind of periodic helical ultra-long period fiber grating (U-LPFG) for measuring the torsion rate and distinguishing the torsion direction. The sensor was fabricated by spirally deforming a common fiber by local heating for 4 periods. This method of fabrication was not only easy to implement, but also further increased the sensitivity of the grating to the torsion because of the spiral structure. This paper introduced the torsional characteristics of this sensor in detail and drew some relevant conclusions. Experimental results showed that the twist sensitivity of 0.085?nm/(rad/m). Meanwhile, the temperature sensing characteristic of the proposed U-LPFG was also tested as 68?pm/°C within the range of 30?°C ～210?°C. Therefore, this proposed sensor could achieve good results in simultaneously measuring the torsion rate and distinguishing the torsion direction, and it may have great potential in some practical applications.     

保偏微结构光纤光栅 F-P腔折射率传感特性分析

针对提高光纤光栅折射率传感器抗干扰能力以及增加反射率的需求,本文提出了一种基于Fabry-Perot腔的保偏微结构光纤(PM-MOF)布拉格光栅折射率传感器.根据传榆矩阵法和有限元方法,分析了微结构光纤光栅F-P腔中被测物折射率与F-P腔反射谱中两个偏振模谐振波长差的关系,在此基础上讨论了中心孔直径、F-P腔长度等参数对传输特性的影响.研究结果表明,随着空气孔中填充物折射率的增加,保偏微结构光纤光栅F-P腔的两个偏振态的谐振波长差将逐渐减小;F-P腔的干涉作用使反射率较单个光栅有很大提高,便于长距离传输和实时解调;两个偏振模对外界干扰具有相似的响应,因此该传感器具有更强的抗干扰能力.本文研究结果为保偏微结构光纤光栅在折射率传感器及其生物传感器方面的应用提供了理论依据.