共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
大型轴类零件表面污染层会严重影响设备的正常运转,甚至造成巨大经济损失,因此通过视觉技术与激光清洗来实现废旧大型轴类零件表面损伤检测与再制造具有重要意义。针对大型轴类零件质量大、轴径变化大、表面具有多孔和键槽等特征,提出并设计基于PLC的自动化激光清洗控制方案,完成了激光清洗装备的结构设计、系统的装配与PLC软件的编程设计,确定控制系统硬件的组成及选型,采用人机互动界面来控制命令和显示数据,并实时反映激光清洗系统的工作情况。结果表明:该系统具有可控可操作性,极大地提高了清洗效率,能够自适应不同轴段部位的清洗作业。 相似文献
4.
基于激光位移传感器三角测量技术,利用摩擦结构驱动轴转动,结合PLC对测量数据进行处理,在线实现细长轴杆类零件径向圆跳动测量。经试验测试,测量精度可达0.05mm,满足中小直径轴类零件的非接触式测量要求。 相似文献
5.
6.
通过对传统轴类零件"一夹一顶"定位、夹紧的方法的加工精度和工艺分析,介绍了一种在数控车床上使用的前置浮动顶尖,并对其工作原理、工作过程和应用作了介绍,对轴类零件的加工有一定的实用价值. 相似文献
7.
针对校直工艺的要求,在传统校直机的基础上设计了一种基于S7-1200PLC自动校直机控制系统.根据控制系统的要求,设计了系统硬件,着重描述了电机控制、压头控制以及数据采集系统.提出了校直机的工艺流程,给出了主从机编程架构,采用工业以太网技术解决了主从机之间的通讯. 相似文献
8.
针对管类、轴类零件校直校平的工艺要求,提出一种基于PLC的积分分离PID控制算法,其中PID控制算法通过PLC来实现,执行机构采用高频响伺服系统。实践结果表明:该系统响应速度快,超调小,校直精度和重复定位精度高。 相似文献
9.
针对汽车液压挺杆类零件内孔的高精度磨削要求,确定出高精度数控内圆磨床工作参数,并提出机床控制系统及其软件设计方案.在机床控制系统设计中,对工件径向进给(X轴)及砂轮修整进给的控制,采用PLC主机-定位单元控制伺服驱动器和伺服电动机的控制方案,对砂轮(Z轴)轴向往返运动的控制,采用液压驱动砂轮快进快退、往复电机驱动往复磨削的控制方案.在人机界面和PLC控制软件设计中,针对该机床的五种工作方式及控制功能要求,完成了界面友好、操作方便、功能完善的合理软件结构,达到了预期的控制目的. 相似文献
10.
为了获得不同砂轮磨料类型下轴类零件的磨削加工温度,基于有限元法建立了轴类零件单磨粒磨削模型,研究了圆锥形磨粒和棱锥形磨粒作用下轴类零件的瞬态磨削温度分布,并对比分析了两种磨粒下不同磨削速度、振动频率对轴类零件磨削温度的影响.研究结果表明,棱锥形磨粒作用下的轴类零件磨削温度分布范围较圆锥形磨粒广,磨削温度较圆锥形磨粒高;... 相似文献
11.
12.
The stability fields of various sulfide phases that form on Fe-Cr, Fe-Ni, Ni-Cr, and Fe-Cr-Ni alloys have been developed as a function of temperature and the partial pressure of sulfur. The calculated stability fields in the ternary A-B-S system are displayed on plots of log
vs. the conjugate extensive variable (nA/nA–nB), which provides a better framework for following the sulfidation of Fe-Cr-Ni alloys at high temperatures. Experimental and estimated thermodynamic data were used in developing the sulfur potential diagrams. Current models and correlations were employed to estimate the unknown thermodynamic behavior of solid solutions of sulfides and to supplement the incomplete phase-diagram data of geophysical literature. These constructed stability field diagrams are in excellent agreement with the sulfide phases and compositions determined experimentally during the sulfidation of SAE 310 stainless steel. The sulfur potential plots appear to be very useful in predicting and correlating the sulfidation of commercial alloys.Nomenclature
a
i
Activity of componenti
- G
0
Standard Gibb's free energy change
- G
M
Integral molar free energy of mixing
- G
i
0
Partial molar free energy of mixing of componenti
- H
Standard enthalpy change
- H
i
Partial molar enthalpy (heat) of mixing of componenti
- H
M
Integral molar enthalpy (heat) of mixing
-
K
Equilibrium constant
-
n
i
Moles of componenti
-
p
s
2
Partial pressure of diatomic sulfur
-
R
Gas constant
- S
i
Partial molar entropy of mixing of componenti
- S
M
Integral molar entropy of mixing
- S
0
Standard entropy change
-
T orK
Absolute temperature
-
X
i
Mole fraction of componenti
- i
Activity coefficient of componenti
- i
Relative chemical potential of componenti 相似文献
13.
14.
JIANG Guochang ZHANG Xiaobing XU Kuangdi Shanghai University of Technology Shanghai China 《金属学报(英文版)》1992,5(12):476-482
Expressing the excess partial molar free energies and integral excess free energy as poly-nome of the composition,then the parameters in the expression of excess partial molarfree energy of C were evaluated based on:the excess partial free energy of C in C-Fe bi-nary alloy:the integral excess free energy of Fe-X binary alloy:the C saturation curveand the iso-activity curve of C (α_c=0.025) in the ternary system.Then the activitycoefficient of X was evaluated with the so-called “I-D” method,by which the componentactivities of every element in the whole molten ternary alloy can be evaluated,and theresults are in good agreement with literature data based on experiment. 相似文献
15.
16.
17.
18.
介绍了锌沸腾焙烧专家系统的结构与功能,锌沸腾焙烧的专家知识与推理,重点分析了该专家系统的主要特点,包括改造的黑板系统、动态数据交换、数学模型以及多任务机制等。该系统应用于现场的实际生产,取得了良好的效果 相似文献
19.
20.
张君艳 《锻压装备与制造技术》2017,52(5)
针对液压机的液压回路控制部分进行了PLC控制系统改造,给出了PLC的输入输出地址表、PLC接线图以及软件程序,调试运行后,不仅提高了其保压控制性能,而且大大提高了系统的可靠性、稳定性和生产效率。 相似文献