共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
搅拌摩擦焊接过程中,焊缝成形与金属流动行为密切相关,而金属流动又取决于焊接工艺参数、搅拌头形貌、材料本身性能及温度场分布等影响因素。与铝合金薄板搅拌摩擦焊不同,厚板焊接时焊缝上部、下部温差太大,导致焊缝材料流动形态发生较大变化。基于焊缝成形理论,从焊缝金属流动分析方法、影响因素出发,分析厚板搅拌摩擦焊焊缝金属流动形态及特征,探讨焊缝中疏松、未焊透、包铝伸入、弱连接等缺陷的形成原因,揭示厚板搅拌摩擦焊焊缝成形机理。研究结果为铝合金厚板搅拌摩擦焊焊接技术在航空、航天等高科技领域的广泛应用提供科学依据和理论基础。 相似文献
4.
焊接作为常用的材料成型手段因其制造的接头具有高密封性和高强度而备受关注,异种金属连接得益于焊接技术的发展,其在工程领域中的应用逐渐增多.利用焊接方法制造铝/钢复合结构已成为近年来的研究热点,与熔化焊和钎焊相比,轴向摩擦焊作为一种固相连接技术存在独特优势,即焊接圆截面异种金属.但经过众多国内外学者研究发现,若要获得优质的铝/钢轴向摩擦焊接头,需要严格控制焊接参数或同时采用附加工艺措施,否则铁-铝脆性金属间化合物降低接头力学性能的问题依然严重,与此同时靠近焊缝的铝材由于受摩擦热与摩擦扭矩的双重影响也易发生组织和性能变化.本文结合国内外文献总结了铝/钢轴向摩擦焊焊接接头的宏观与微观特征、组织与性能特点及其调控方法、焊接参数制定原则,最后对铝/钢轴向摩擦焊的未来研究方向进行了简要分析. 相似文献
5.
6.
由于铝、钢的物理化学性质存在巨大差异,铝/钢的连接是焊接领域的难点问题。搅拌摩擦焊是低热输入的固态连接方法,能够有效控制铝/钢金属间化合物的生长,且搅拌针强烈的搅拌作用可增加铝/钢异种材料机械咬合程度,得到高质量的铝/钢焊接接头,铝/钢搅拌摩擦焊已经成为了焊接领域的热点问题。文中综述了铝/钢搅拌摩擦焊国内外研究现状,涉及到接头形式、焊缝成形、焊接工艺和力学性能,着重介绍了铝/钢搅拌摩擦焊接头的连接机制,并围绕铝/钢搅拌摩擦焊存在的两大问题,对铝/钢搅拌摩擦焊新技术进行总结,并进一步提出了铝/钢搅拌摩擦焊的基础研究方向。 相似文献
7.
综述了大块金属玻璃焊接领域的最新进展;介绍了成功焊接大块金属玻璃的不同方法,包括爆炸焊、电火花焊、电子束焊、用多层金属片进行焊接等熔化焊,以及固相下的摩擦焊.熔化焊接方法的成功,原因在于大块金属玻璃的玻璃态成型能力和在这些方法中高的线能量;而摩擦焊接的成功,则是由于金属玻璃在过冷液相区的热稳定性以及在该区域的超塑性和粘滞性. 相似文献
8.
9.
AZ81A镁合金焊接接头的组织与性能 总被引:9,自引:0,他引:9
对AZ81A镁合金进行了搅拌摩擦焊和钨极氩弧焊的工艺实验.通过观察焊接接头宏观成形,分析焊缝显微组织,测试焊接接头的显微硬度分布,对两种焊接方法焊接性进行了分析.研究结果表明:搅拌摩擦焊的外观成形及可操作性均优于熔化焊,焊件焊后基本没有变形.搅拌摩擦焊接头的焊缝为锻造组织,焊核区为细小的再结晶组织;热影响区为部分再结晶组织,再结晶的晶粒沿原铸造晶界生长.熔化焊接头的焊缝区组织为较母材细小的等轴晶,熔合区组织的晶界为α固溶体和Mg17Al12共晶,并有强化相析出;热影响区组织的晶界分布有不连续的共晶. 相似文献
10.
11.
A method is proposed for estimating the parameters of a mixture of exponential and Weibull distributions for which the accuracy of preliminary estimates obtained by graphical analysis is refined in accordance with the criterion of maximum likelihood. The efficiency of the proposed method is supported by the results of statistical modeling. 相似文献
12.
An approximate analytical expression is derived for the velocity of the front of the wave of change of boiling modes on a
rod and on a plate. The impact of the Thomson effect and of the heater orientation in the gravity field is included. Adequate
agreement is demonstrated between the derived relations and experimental data. 相似文献
13.
Liebert A Wabnitz H Grosenick D Möller M Macdonald R Rinneberg H 《Applied optics》2003,42(28):5785-5792
A novel method for the determination of the optical properties of tissue from time-domain measurements is presented. The data analysis is based on the evaluation of the first moment and the second centralized moment, i.e., the mean time of flight and the variance of the measured distribution of times of flight (DTOF) of photons injected by short (picosecond) laser pulses. Analytical expressions are derived for calculation of absorption and of reduced scattering coefficients from these moments by application of diffusion theory for infinite and semi-infinite homogeneous media. The proposed method was tested on experimental data obtained with phantoms, and results for absorption and reduced scattering coefficients obtained by the proposed method are compared with those obtained by fitting of the same data with analytical solutions of the diffusion equation. Furthermore, the accuracy of the moment analysis was investigated for a range of integration limits of the DTOF. The moment analysis may serve as a comparatively fast method for evaluating optical properties with sufficient accuracy and can be used, e.g., for on-line monitoring of optical properties of biological tissue. 相似文献
14.
15.
16.
17.
水三相点是开尔文热力学温度的唯一基准点,也是ITS-90国际温标重要的定义固定点。因此,水三相点不确定度分析对整个温标的建立、温度量值传递起着至关重要的作用。近3年来,中国计量科学研究院研制出一系列高质量的水三相点容器,加强了水三相点的研究,为不确定度的分析提供了更为可靠的实验依据。同时,不确定度的分析也是客观评价新研制容器性能的一个重要指标。因此,根据实验结果对新研制容器所复现的水三相点进行了不确定度评定。评定结果表明,其扩展不确定度为0.16mK(k=2.69,P=0.99)。 相似文献
18.
19.
20.
Conventional methods for summation of direct measurement errors are considered. Conditions under which these methods provide consistent results are stated. It is proposed to utilize for characteristic of the total error, its interval estimator or the half-sum of the value obtained by adding up its arithmetic and geometric random errors.Translated from Izmeritel'naya Tekhnika, No. 4, pp. 10–12, April, 1995. 相似文献