共查询到19条相似文献,搜索用时 421 毫秒
1.
2.
橡胶空气弹簧的发展历程和应用领域
橡胶空气弹簧诞生于19世纪中期,早期用于机械设备减振。由于其众多的优点,因而在现代公路和轨道交通车辆,以及工业机械等领域获得了广泛的应用。随着社会的发展,人们对生活的要求(包括对降低振动和噪声的干扰)越来越高,因此橡胶空气弹簧隔振技术的应用会越来越多,其前景十分广阔。 相似文献
3.
<正> 一、SD型橡胶隔振垫及其应用目前,我国常用的隔振材料与元件有:钢弹簧、橡胶及橡胶类隔振装置,树脂合成的玻璃纤维板以及软木等等,各有其优缺点。在此不予细述,在此我们仅在几个工程中将应用的SD型橡胶隔振垫作一些介绍。 相似文献
4.
介绍了橡胶空气弹簧的工作原理和结构特点,对比橡胶空气弹簧与钢簧等在安居煤矿选煤厂实际使用情况表明,橡胶空气弹簧降低了员工的劳动强度,改善了员工的工作环境,节约了现场成本,提高了企业的经济效益. 相似文献
5.
为了更好地生产和应用橡胶空气弹簧 ,必须首先了解其性能特点 ,因此掌握橡胶空气弹簧的特性曲线是十分必要的。本文仅以 769N橡胶空气弹簧为例说明橡胶空气弹簧静态特性曲线 (也称刚度曲线 )的测绘。1 静态特性曲线测绘方法根据空气弹簧结构特点配置相应的上、下底座并固定在测试设备上 ,然后向空气弹簧内充气并调整总成高度至设计标准高度。调定气压为设计气压后 ,断开气源。施加外力使空气弹簧上升或下降 ,分别记录测试装备上升和下降过程中的位移和所施加的载荷 ,然后根据所记录的位移和载荷绘制空气弹簧静态特性曲线。2 静态特性曲线… 相似文献
6.
根据橡胶空气减震弹簧的功用特点,介绍了橡胶空气减震弹簧的结构原理及其类型;论述了橡胶空气减震弹簧的主要性能特点和工作特性参数;同时指出了橡胶空气弹簧的发展前景。 相似文献
7.
8.
针对汽车橡胶空气弹簧存在的流固耦合问题,采用ABAQUS软件对橡胶空气弹簧系统进行模拟,完成橡胶空气弹簧的特性有限元分析。利用Symm-Transform的功能优势,实现橡胶空气弹簧轴对称模型到3D模型的转换。为保证汽车橡胶空气弹簧橡胶气囊的隔震效果,将橡胶空气弹簧的动刚度无限趋近于静刚度。当工作气压为0.6 MPa时,动静刚度比为1.32;当工作气压为0.7 MPa时,动静刚度比为1.27。不同工作气压下的动静刚度比均小于1.4,可证明该汽车橡胶空气弹簧气囊具有良好的隔震效果。 相似文献
9.
10.
根据汽车用橡胶空气弹簧悬架的变迁,介绍了汽车用橡胶空气和油气弹簧的种类和结构特点及参数;同时,还指出了橡胶空气弹簧的发展趋势。 相似文献
11.
12.
《塑料、橡胶和复合材料》2013,42(7):310-317
AbstractThe dynamic shear modulus of magnetosensitive (MS) natural rubber composites is experimentally studied, where influences of carbon black, plasticiser and iron particle concentrations are investigated at various dynamic shear strain amplitudes and external magnetic fields within the lower structure borne frequency range. The iron particles embedded in natural rubber are irregularly shaped and randomly distributed; the plasticisers simplify the iron particle blending process, while carbon black reduces the production costs and improves the mechanical properties. The results show that the relative MS effect on the shear modulus magnitude increases with increased plasticiser and iron particle concentration and decreases with increased carbon black concentration. Furthermore, their relative contributions are quantified. Consequently, the study provides a basis for optimising the composition of MS natural rubber to meet a variety of requirements, including those of vibration isolation, a promising application area for MS materials. 相似文献
13.
14.
New methods for testing air springs have received a lot of interest in recent years. In this article APDL (ANSYS parametric design language) was utilized to simulate static and dynamic test process of air springs. In the simulation, multiple load steps solution was carried out through APDL *DO‐LOOP and array parameter method. The program (capsule volume calculating macro) based on scatter sum method enabled the loop. The scalar quantity PRESSURE was established as inner tracking parameter to update inner pressure. Table parameter PRESSURES was established as inner pressure output parameter to export inner pressure of each load step. According to rubber elastic behavior and cord‐rubber composite aeolotropy, hyper elastic element and layer element were preferred for simulation. Comparison was done between static simulation results and corresponding test data to prove feasibility of multistep analysis. In consequence, some major parameters such as cord angle, initial inner pressure, and auxiliary chamber volume were taken into account, which have remarkable effect on static mechanical performance of EQ6111 air spring. Finally, the same method was applied to the simulation of dynamic test process, achieving abundant analysis results according to every 0.5 Hz increment of load frequencies varying from 0.5 to 2.5 Hz. Load frequency threw remarkable effect on the dynamic mechanical performance of EQ6111 air spring, because inertial effect and damping effect played important roles therein. The study aims to make contribution to the development of platform of air spring simulation and parameterized design (PASSPD). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009 相似文献
15.
橡胶减震器的设计原理和性能测试 总被引:3,自引:1,他引:2
简要介绍了橡胶减震器隔离和衰减振动的原理,橡胶部件的动态性能、胶料配合和橡胶件几何尺寸对减震性能的影响,以及减震器性能的测试方法。 相似文献
16.
橡胶坐垫由橡胶层、布基型锡铂纸(面层)和弹簧骨架组成,适合于摩托车、自行车在夏季使用。该坐垫整体柔软、乘坐舒适、可随车座形状不同而相应变形;锡铂能反射太阳光,太阳曝晒下坐垫不发烫;该坐垫上有许多小孔,这些小孔与弹簧内孔贯通,橡胶坐垫不但透气性好,而且在摩托车、自行车行驶时,空气可从敞开的弹簧内孔中流过,通过小孔将凉爽的气流传递到面层,乘坐(或骑车)人臀部清凉舒适。 相似文献
17.
王前景 《硫磷设计与粉体工程》2005,(4):30-32
当仪表室、变配电室等布置在防爆区域内时,应设正压送风系统,创造一个空气清新的正压(30~50Pa)环境,以确保仪表及各种设备的正常运行。结合工程实例,介绍了正压送风系统流程及设计要点,如空气净化处理、建筑物的封闭、送风量的计算、送风设备的选择、末端设计及控制报警系统的设置等。 相似文献
18.
An effective analytical-experimental test method is used in the current work to characterize the vibration isolation performance of nitrile-butadiene rubber (NBR) reinforced with multi-walled carbon nanotubes (MWCNTs). A series of specimens were manufactured with 10 different NBR/MWCNTs concentrations (0 to 20wt% MWCNTs). In order to determine the static compression stiffness and hysteresis of the mounts, compression and cyclic tests were conducted. The vibration isolation properties were determined through the analysis of the transmissibility of a suitably designed test system. NBR’s mechanical properties and vibration isolation properties were improved with the addition MWCNTs, suggesting that the enhancement of NBR with MWCNTs was rather effective. Considering the obtained results, the dynamic stiffness of NBR and its capacity to isolate vibration can be adjusted by controlling the proportion of MWCNTs. 相似文献
19.
This article examines thermoplastic elastomers (TPEs) and thermoplastic vulcanizates (TPVs) as two types of elastomers from melt-blended and dynamically vulcanized ethylene–propylene–diene monomer (EPDM) rubber materials and nylon 6 plastic materials. A series of investigations were conducted on the mechanical properties, morphology, dynamic mechanical properties, hysteresis behavior, and dynamic antivibration properties with different nylon 6 contents. The experimental results showed that the incompatibility between EPDM and nylon 6 led to the easy destruction of the TPV materials in two interfacial polymers upon the application of an external force. Thus, after a dynamic vulcanization process, the mechanical properties of the EPDM/nylon 6 blends were not as good as those of the TPE materials. In terms of morphology, nylon 6 plastics were uniformly distributed in the EPDM/nylon 6 blends during the EPDM rubber phase before vulcanization was performed. After the dynamic vulcanization, phase inversion was produced in which rubber microparticles were formed and dispersed in the nylon 6 plastic phase. The results of dynamic mechanical analysis, compression vibration hysteresis behavior, and dynamic property antivibration experiments showed that the blends provided better vibration isolation and antivibration performance after the amount of nylon 6 was increased and EPDM and nylon 6 were blended through dynamic vulcanization. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008 相似文献