Self-reinforced polypropylene/LCP prepregs and laminates

Polypropylenes (PPs) of various molecular weights were mixed with a thermotropic liquid crystal polymer (LCP) to prepare unidirectional sheets (prepregs), quasi-isotropic and unidirectional laminates. The mechanical properties and the morphology of the prepregs and the laminates at 0° and 90° with respect to the machine direction were investigated as a function of draw ratio, LCP concentration and molecular weight of the PP. The results for prepregs and laminates showed that both drawing and LCP concentration generally enhanced modulus and tensile strength in machine direction. The morphology of LCP changed from spherical or ellipsoidal droplets to elongated fibrils as the draw ratio increased. The diameter of LCP fibrils decreased with increasing molecular weight of the PP matrix, indicating more effective droplet breakup and better mixing in the case of high molecular weight PP.     

Effects of processing conditions on the mechanical performance of maleic anhydride compatibilized in-situ composites of polypropylene with liquid crystalline polymer

Maleic anhydride compatibilized blends of isotactic polypropylene (PP) and thermotropic liquid crystaline polymer (LCP) were prepared either by the direct injection molding (one-step process), or by twin-screw extrusion blending, after which specimens were injection molded (two-step process). The morphology and mechanical properties of these injection molded in situ LCP composites were studied by means of scanning electron microscopy (SEM), Izod impact testing, static tensile, and dynamic mechanical measurements. SEM observations showed that fine and elongated LCP fibrils are formed in the maleic anhydride compatibilized in situ composites fabricated by means of the one-step process. The tensile strength and modulus of these composites were considerably close to those predicted from the rule of mixtures. Furthermore, the impact behavior of LCP fibril reinforced composites was similar to that of the glass fiber reinforced polymer composites. On the other hand, the maleic anhydride compatibilized blends prepared from the two-step process showed lower mechanical performance, which was attributed to the poorer processing behavior leading to the degradation of PP. The effects of the processing steps, temperatures, and compatibilizer addition on the mechanical properties of the PP/LCP blends are discussed.     

Injection molding of poly(ethylene terephthalate) reinforced with pregenerated thermotropic liquid crystalline polymer microfibrils

This work was concerned with the injection molding of poly(ethylene terephthalate) (PET) reinforced with pregenerated thermotropic liquid crystalline polymer (TLCP) fibrils, where the TLCP had a higher melt processing temperature than PET. These composites, referred to as pregenerated microcomposites, were produced using a two step processing scheme. First, a novel dual extrusion process was used to spin strands of PET reinforced with nearly continuous TLCP fibrils. Second, these strands were subsequently chopped into pellets and injection molded below the melt processing temperature of the TLCP but above that of PET. This allowed the high modulus TLCP fibrils generated in the spinning step to be retained in the injection molded samples. TLCP concentration and strand draw ratio were varied in the composite strands to determine how they affected mechanical properties. It was shown that the best properties were obtained using strands containing 50 weight percent TLCP with draw ratios greater than 50, which were diluted to the desired loading level with a low viscosity injection molding grade of PET. Specifically, these composites had tensile moduli as high as 5.7 GPa when reinforced with 30 weight percent HX1000. Also, it was determined that pregenerated microcomposites had smoother surfaces than glass-filled PET.     

Extruded blends of a thermotropic liquid crystalline polymer with polyethylene terephthalate,polypropylene, and polyphenylene sulfide

Structure–property relationships were investigated for blends of a polyester-type thermotropic liquid crystalline polymer (LCP) with polyethylene terephthalate (PET), polypropylene (PP), and polyphenylene sulfide (PPS). The polymers were melt blended in a twin-screw extruder and the blends were extruded to strands of different draw ratios. Tensile properties of the blends were determined as a function of LCP content and draw ratio and compared with the results of morphological and rheological analyses. In general, the strength and stiffness of the matrix polymers were improved with increasing LCP content and draw ratio. At a draw ratio of 11, the blends of PET/30 wt % LCP exhibited a tensile strength about three times and an elastic modulus nearly four times that of pure PET. All blends exhibited a skin/core morphology with thin fibrils in the skin region. The formation and the sizes of the fibril-like LCP domains in the matrices were found to depend on LCP content and the viscosity ratio of the blend components.     

Structure and properties of molded polyblends containing liquid crystalline polymers

The relationship between the microstructure developed during injection molding of liquid crystalline polymers (LCPs) containing blends and their mechanical properties, was studied. A wholly aromatic copolyester LCP was melt blended in various levels with polycarbonate (PC), poly(butylene terephthalate) (PBT), Nylon 6 (N-6), and amorphous nylon (AN). In all cases the LCP was the minor component. The resulting injection molded structure had a distinct skin core morphology, where elongated fibrous LCP particles comprised the skin layer and spherical and ellipsoidal ones composed the core section. The highest elongation and the finest diameter LCP fibrils were obtained with AN/LCP system, followed by PC/LCP. PBT/LCP blends showed a coarser morphology, while N-6/LCP system did not correlate with the tensile moduli of the injection molded specimens. AN/LCP blends demonstrated the highest moduli values, consistent with the highest orientations observed using electron microscopy, followed by PC/LCP, PBT/LCP, and N-6/LCP. Finally, tensile strength levels were correlated with both orientation levels and interfacial adhesion between the polyblend components. AN/LCP that exhibited the highest orientation and good adhesion appearance gave the highest tensile strength values followed by PC/LCP, PBT/LCP, and N-6/LCP polyblends.     

Fiber reinforcement and fracture resistance of PC/PBT/LCP ternary in situ composite

The microstructures, mechanical properties, and fracture toughness of LCP (Vectra B950) reinforced PC/PBT blend with a 60/40 weight ratio have been studied. LCP of varying concentrations were investigated as rigid fillers in matrices of multiphase polymer blends. In this study, differences in microstructures and morphology between samples of two thicknesses (4 mm thick and 6 mm thick) and two geometries (dumbbell and rectangular) were compared using scanning electron microscopy (SEM). Given identical processing conditions, fibrous LCP structures were evident in the 4-mm-thick injection molded, dumbbell-shaped samples, whereas the 6-mm-thick rectangular samples displayed spherical dispersion of LCP aggregates that embrittled the preblended ductile matrix. Tensile properties of the dumbbell specimens showed superior strengthening and stiffening whereby the tensile strength increased twofold and the modulus increased fourfold. Plane strain fracture toughness was slightly enhanced as the LCP content increased because of the fiber strengthening effect but the overall fracture performance of the in situ composites was relatively poor compared with PC/PBT. Experimental results were compared with those predicted in composite theory. Simplified micromechanics equations were developed to describe the tensile moduli of injection molded LCP reinforced blends that exhibited a strong skin-core morphology.     

Injection molding of long sisal fiber–reinforced polypropylene: Effects of compatibilizer concentration and viscosity on fiber adhesion and thermal degradation

A two‐step process was used to obtain long sisal fiber‐polypropylene (SF/PP)–reinforced thermoplastic composites, using maleic anhydride grafted polypropylene (MA‐g‐PP) as a compatibilizer. At a first stage, modified polypropylenes (mPP) were used for an extrusion impregnation process, for the preparation of composite pellets containing about 70 wt% of SF. SF/mPP pellets with a large aspect ratio were prepared by continuous extrusion impregnation of a continuous SF yarn, using a single screw extruder and an adequate impregnation die. The mPP used were MA‐g‐PP and regular polypropylene (PP), modified by reaction with different amounts of an organic peroxide. The composite pellets were thus dry blended with regular PP pellets in an injection machine hopper, and injection molded to obtain composite tensile specimens with a minimum quantity of modified polypropylene, minimum fiber breakage and thermal degradation, and excellent mechanical properties. It is shown that the fiber breakage is reduced to a minimum, even for recycled composites, due to the presence of the low‐viscosity polymer layer wetting the SF fibers. The bulk composite effective viscosity and the fiber breakage extent and thermal degradation during the injection‐molding step are found to be closely related. Blending with much less expensive mPP at the impregnation stage optimizes the amount of expensive MA‐g‐PP. POLYM. ENG. SCI., 45:613–621, 2005. © 2005 Society of Plastics Engineers     

Rheology and impact characteristics of compatibilized polypropylene-liquid crystalline polymer composites

Polypropylene-liquid crystalline polymer (PP/LCP) and maleic anhydride compatibilized PP/LCP blends were prepared using the extrusion technique followed by injection molding. The LCP employed was Vectra A950 which consists of 25 mol % of 2,6-hydroxynaphthoic acid and 75 mol % of p-hydroxybenzoic acid. The rheology, morphology, and impact behavior of compatibilized PP/LCP blends were investigated. The rheological measurements showed that the viscosity of LCP is significantly higher than that of the PP at 280°C. This implied that the viscosity ratio of the LCP to the polymer matrix is much larger than unity. Scanning electron microscopy (SEM) observations revealed that the LCP domains are dispersed mainly into elongated ellipsoids in the PP/LCP blends. However, fine fibrils with large aspect ratios were formed in the compatibilized PP/LCP blends containing LCP content ≥ 10 wt %. The development of fine fibrillar morphology in the compatibilized PP/LCP blends had a large influence on the mechanical properties. The Izod impact strength of the PP/LCP blends showed little dependence on the LCP concentrations. On the other hand, the impact strength of the compatibilized PP/LCP blends was dependent on the LCP concentrations. The correlation between the LCP fibrillar morphology and spherulitic structure with the impact properties of the compatibilized PP/LCP blends is discussed. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 521–530, 1998     

Morphology and mechanical properties of liquid crystalline copolyester and poly(ethylene 2,6-naphthalate) blends

Blends of poly(ethylene 2,6-naphthalate) (PEN) and a liquid crystalline copolyester (LCP), poly(benzoate-naphthoate), were prepared in a twin-screw extruder. Specimens for mechanical testing were prepared by injection molding. The morphology and mechanical properties were investigated by scanning electron microscopy (SEM) and an Instron tensile tester. SEM studies revealed that finely dispersed spherical domains of the liquid crystalline polymer (LCP) were formed in the PEN matrix, and the inclusions were deformed into fibrils from the spherical droplets with increasing LCP content. The morphology of the blends was found to be affected by their composition and a distinct skin-core morphology was found to develop in the injection molded samples of these blends. Mechanical properties were improved with increasing LCP content, and synergistic effects have been observed at 70 wt% LCP content whereas the elongation at break was found to be reduced drastically above 10 wt% of LCP content. This is a characteristic typical of chopped-fiber-filled composites. The improvement in mechanical properties is likely due to the reinforcement of the PEN matrix by the fibrous LCP phase as observed by scanning electron microscopy. The tensile and modulus mechanical behavior of the LCP/PEN blends was very similar to those of the polymeric composite, and the tensile strength and flexural modulus of the LCP/PEN 70/30 blend were two times the value of PEN homopolymer and exceeded those of pure LCP, suggesting LCP acts as a reinforcing agent in the blends.     

Morphological aspects of injected polypropylene/clay nanocomposite materials

Polypropylene (PP) clay nanocomposites were injection‐molded using two different coupling agents based on maleic anhydride‐grafted PP (MA‐g‐PP) and two clay loadings. The morphological aspects of these materials were studied by depth profiling. Molecular chain and clay orientations were characterized using attenuated total reflectance‐infrared analysis and transmission electron microscopy (TEM). Both clay platelets and PP molecular chain orientations were found to decrease from the surface toward the core of the injection–molded specimens. Clay intercalation, characterized by both complementary X‐ray diffraction and TEM, was found to be significantly influenced by both the characteristics of the coupling agent used and the type of residual stresses generated at each layer across the thickness of the injection‐molded parts. The use of low‐molecular weight (M_w) MA‐g‐PP led to a uniform intercalation but with no further exfoliation. The use of higher molecular weight MA‐g‐PP led to a heterogeneous intercalation with some signs of exfoliation. The crystallization behavior of PP clay nanocomposites studied by differential scanning calorimetry showed an increase in the level of crystallinity from the surface to the core of the specimens; these results were also confirmed by scanning electron microscopy. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Mechanical properties and morphology of LCP/ABS blends compatibilized with a styrene–maleic anhydride copolymer

A co‐polyester liquid crystalline polymer (LCP) was melt blended with an acrylonitrile–butadiene–styrene copolymer (ABS). LCP fibrils are formed and a distinct skin/core morphology is observed in the injection moulded samples. At higher LCP concentration (50 wt%), phase inversion occurs, where the dispersed LCP phase becomes a co‐continuous phase. While the tensile strength and Young's modulus remain unchanged with increasing LCP content up to 30 wt% LCP, a significant enhancement of the modulus at 50 wt% LCP is observed due to the formation of co‐continuous morphology. The blend modulus is lower than the values predicted by the rule of mixtures, suggesting a poor interface between the LCP droplets and ABS matrix. A copolymer of styrene and maleic anhydride (SMA) was added in the LCP/ABS blends during melt blending. It is observed that SMA has a compatibilizing effect on the blend system and an optimum SMA content exists for mechanical properties enhancement. SMA improves the interfacial adhesion, whereas excess of SMA reduces the LCP fibrillation. Copyright © 2003 Society of Chemical Industry     

In situ microfibrillar‐reinforced composites of isotactic polypropylene/recycled poly(ethylene terephthalate) system and effect of compatibilizer

Recycled poly(ethylene terephthalate) from waste bottles (hereafter, rPET) was used as an reinforcing material for isotactic polypropylene (iPP) based on the concept of in situ microfibrillar‐reinforced composites (iMFCs). Microfibers of rPET were successfully generated during melt‐extrusion and subsequent drawing and preserved in the final injection‐molded specimens. The effects of draw ratio, initial size of ground rPET flakes, and rPET content on morphological appearance of the extrudates and the as‐formed rPET fibers and mechanical properties of the as‐prepared iMFCs were investigated. The results showed that diameters of the as‐formed rPET fibers decreased with increasing draw ratio, and the initial size of ground rPET flakes did not affect the final diameters of the as‐formed rPET fibers nor the mechanical properties of the as‐prepared iMFCs. Flexural modulus, tensile modulus, and tensile strength of iPP/rPET iMFCs were improved by the presence of rPET microfibers and further improvement could be achieved by the addition of maleic anhydride‐grafted iPP (PP‐g‐MA), which was used as the compatibilizer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1173–1181, 2006     

Morphology and mechanical properties of polypropylene/organoclay nanocomposites

Polypropylene (PP) nanocomposites were prepared by melt intercalation in an intermeshing corotating twin‐screw extruder. The effect of molecular weight of PP‐MA (maleic anhydride‐ modified polypropylene) on clay dispersion and mechanical properties of nanocomposites was investigated. After injection molding, the tensile properties and impact strength were measured. The best overall mechanical properties were found for composites containing PP‐MA having the highest molecular weight. The basal spacing of clay in the composites was measured by X‐ray diffraction (XRD). Nanoscale morphology of the samples was observed by transmission electron microscopy (TEM). The crystallization kinetics was measured by differential scanning calorimetry (DSC) and optical microscopy at a fixed crystallization temperature. Increasing the clay content in PP‐ MA330k/clay, a well‐dispersed two‐component system, caused the impact strength to decrease while the crystallization kinetics and the spherulite size remained almost the same. On the other hand, PP/PP‐MA330k/clay, an intercalated three‐component system containing some dispersed clay as well as the clay tactoids, showed a much smaller size of spherulites and a slight increase in impact strength with increasing the clay content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1562–1570, 2002     

Mechanical performance of blends of thermotropic liquid crystalline polymer spheres‐dispersed polycarbonate

Liquid crystalline polymer (LCP) blends with a thermotropic LCP dispersed in the form of microspheres is studied to show the role of LCP spheres. Polycarbonate (PC), p‐hydroxybenzoic acid–poly(ethylene terephthalate) copolyester, and random styrene–maleic anhydride copolymer are used as the matrix, the dispersed phase, and the compatibilizer, respectively. A scanning electron microscopy observation shows the formation of LCP spheres with improved interfacial adhesion in the injection‐molded samples via compatibilization. The mechanical tests show increased modulus, elongation at break, and fracture‐absorbed energy of blends of LCP spheres‐dispersed PC. This shows an optimistic potential for the dispersed LCP phase, in spite of its morphology in the form of fibrils for reinforcing the matrix or in the form of microspheres for toughening the matrix. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1493–1499, 2003     

Structural properties and impact fracture behavior of injection molded blends of liquid crystalline copolyester and modified poly(phenylene oxide)

Blends of a thermotropic liquid crystalline polymer (LCP) with modified poly (phenylene oxide) (PPO) were injection molded. The morphology, tensile properties and dynamic mechanical behavior of the blends have been studied as a function of LCP content. Furthermore, the impact performance of these blends has been investigated by the instrumented Izod and Charpy falling weight tests. The critical strain energy release rate (G_IC) of the blends were determined and the G_IC values were found to be dependent on the LCP content. The results are discussed and explained in terms of materials morphology.     

Characterization of thermotropic liquid crystalline polyester/polysulfone blends

The morphology, rheology, and mechanical properties of blends of polysulfone (PSF) with up to 65% of a wholly aromatic liquid crystalline polymer (LCP) were investigated. In injection molded specimens a skin-core morphology was observed with the LCP minor phase oriented in the skin and globular in the core. Scanning electron microscopy of fractured surfaces showed sharp phase boundaries, suggesting low interfacial adhesion. The neat PSF and blends with low amounts of LCP exhibited a low shear Newtonian plateau not observed in the blends with high LCP levels. The addition of LCP to PSF resulted in an increase in stiffness, a small increase in tensile strength, and a significant improvement in processability.     

Polypropylene and potato starch biocomposites: Physicomechanical and thermal properties

To determine the possibility of using starch as biodegradable filler in the thermoplastic polymer matrix, starch‐filled polypropylene (PP) composites were prepared by extrusion of PP resin with 5, 10, 15, and 20 wt % of potato starch in corotating twin‐screw extruder. The extruded strands were cut into pellets and injection molded to make test specimens. These specimens were tested for physicomechanical properties such as tensile and flexural properties, Izod impact strength, density, and water absorption. These PP composites were further characterized by melt flow index (MFI), vicat softening point (VSP), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) techniques. It was found that, with increase in starch content, tensile modulus, flexural strength, and flexural modulus of the PP composites increased along with the increase in moisture, water absorption, and density, while retaining the VSP; but, tensile strength and elongation, impact strength, hardness, and MFI of the PP composites also decreased. DSC analysis of the PP composite revealed the reduction in melting temperature, heat of fusion, and percentage of crystallization of PP with increase in starch content. Similarly, TGA traces display enhanced thermal degradability for PP as starch content increases. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Use of a sodium ionomer as a compatibilizer in polypropylene/high‐barrier ethylene–vinyl alcohol copolymer blends: The processability of the blends and their physical properties

The effect of a sodium ionomer (ion.Na⁺) on the compatibility of polypropylene (PP)/high‐barrier ethylene–vinyl alcohol copolymer (EVOH) blends was studied in terms of the thermal, mechanical, and optical properties and morphology. The rheological behavior, tensile tests, and morphology of the binary blends showed that the miscibility of EVOH with PP was very poor. The miscibility of the polymers improved with the ionomer addition. In general, the ion.Na⁺ concentration did not alter the thermal behavior of the blends, but it did improve the ductility of the injection‐molded specimens. Scanning electron micrographs displayed better adhesion between the PP and EVOH phases in the samples with the ionomer. The mechanical improvement was better in the film samples than in the injection‐molded samples. A 90/10 (w/w) PP/EVOH film with 5% ion.Na⁺ and an 80/20 (w/w) PP/EVOH film with 10% ion.Na⁺ presented better global properties than the other blends studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1763–1770, 2004     

The effect of the viscosity ratio of dispersed phase to matrix on the rheological,morphological, and mechanical properties of polymer blends containing a LCP

The effect of the viscosity ratio of the dispersed LCP phase to the polystyrene/poly(phenylene oxide) (PS/PPO) thermoplastic matrix on the rheological, morphological, and resultant mechanical properties of the LCP blends was investigated. The viscosity of PS/PPO is largely dependent on the blend composition, so that different levels of viscosity ratios of dispersed LCP phase to PS/PPO thermoplastic matrix are obtained by using PS/PPO premixtures of different blend ratios as a thermoplastic matrix. When the viscosity of the LCP dispersed phase is lower than that of the thermoplastic matrix, finely distributed fibril structure of LCP is obtained. Tensile modulus of injection molded specimens show a positive deviation from the additive rule when the viscosity ratio (η_LCP/η_matrix) is smaller than unity. These improvements in tensile modulus are attributed to the formation of finely distributed LCP fibrils. © 1996 John Wiley & Sons, Inc.     

Studies on morphology,mechanical, thermal,and rheological behavior of extrusion‐blended polypropylene and thermotropic liquid crystalline polymer

Polypropylene (PP) was melt‐blended in a single‐screw extruder with a thermotropic Vectra B‐950 liquid crystalline polymer (LCP) in different proportions. The mechanical properties of such blends were compared in respect of their Young's moduli, ultimate tensile strength (UTS), percent elongation at break, and toughness to those of pure PP. The thermal properties of these blends were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The morphology was studied by using a polarizing light microscope (PLM) and a scanning electron microscope (SEM) while the rheological aspects of the blends and the pure PP were studied by a Haake Rheowin equipment. Mechanical analysis (tensile properties) of the blends showed pronounced improvement in the moduli and the UTS of the PP matrix in the presence of 2–10% of LCP incorporation. TGA of all the blends showed an increase in the thermal stability for all the blends with respect to the matrix polymer PP, even at a temperature of 410°C, while PP itself undergoes drastic degradation at this temperature. DSC studies indicated an increase in the softening range of the blends over that of PP. Morphological studies showed limited mixing and elongated fibril formation by the dispersed LCP phase within the base matrix (PP) at the lower ranges of LCP incorporation while exhibiting a tendency to undergo gross phase separation at higher concentrations of LCP, which forms mostly agglomerated fibrils and large droplets. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 767–774, 2003