Creation of investment funds for privatization

Mosoblkomimushchestvo. Translated from Metallurg, No. 11, pp. 4–6, November, 1992.     

Automatic welding of elements of a blast-furnace shell

Donbassdomnaremont Trust. Translated from Metallurg. No. 12, p. 29, December, 1989.     

Oils for the fluid-film bearings of rolling mills

Kuibyshev Branch of the All-Union Scientific-Research Institute of the Petroleum Industry (VNIINP). Chermetmekhanizatsiya Scientific-Industrial Association. Translated from Metallurg, No. 3, p. 36, March, 1990.     

Slowing down strip on the hot bed of a continuous lightsection mill

Krivorozhstal' Metallurgical Combine. Dneprchermetavtomatika Scientific-Industrial Association. Translated from Metallurg, No. 6, pp. 37–38, June, 1990.     

Averaging the sinter charge in hoppers

Zaporozhe Industrial Institute. Zaporozhstal' Combine. Translated from Metallurg, No. 2, pp. 19–21, February, 1988.     

Use of ataalene for the installation of a ferroalloys furnace

Uraldomnaremont Trust. Translated from Metallurg, No. 5, p. 28, May, 1990.     

Improving the effectiveness of reheatings conducted to electrically refine metal

Dneprospetsstal Plant. Translated from Metallurg, No. 4, pp. 34–35, April, 1990.     

Improving the efficiency of the production of corrosion-resistant steels in 20-ton arc furnaces

Ukrainian Scientific-Research Institute of Special Steel (UkrNIIspetsstal'). Élektrostal' Plant. Translated from Metallurg, No. 5, p. 36, May, 1988.     

Improving the use of coke-oven gas in blast-furnace smelting

Makeevka Metallurgical Combine. Institute of Ferrous Metallurgy. Chermetinformatisya Institute. Translated from Metallurg, No. 9, pp. 22–23, September, 1989.     

Making the shaft of a blast furnace out of large panels

Dneprodomnaremont Trust. Translated from Metallurg, No. 6, p. 32, June, 1990.     

Efficient energy use

Uzbek Metallurgical Plant and the Initiator LTD Company. Translated from Metallurg, No. 2, p. 15, February, 1994.     

Method of monitoring the condition of a blast-furnace bottom

Krivorozhstal Combine. Translated from Metallurg, No. 1, p. 25, January, 1990.     

Automation and provision of remote-control facilities for the industrial water supply of a combine

Magnitogorsk Metallurgical Combine Energostal Scientific-Industrial Association. Translated from Metallurg, No. 11, pp. 26–27, November, 1989.     

Operation of a blast furnace equipped with modernized screens for the metallic charge component

Dnepropetrovsk Metallurgical Institute. Krivorozhstal' Combine. Translated from Metallurg, No. 6, pp. 34–35, June, 1988.     

Features of the generation of an operating fund and organization of workers' pay under existing laws

The Metallurgprom Company. Translated from Metallurg, No. 7, pp. 11–12, July, 1992.     

Year of worker safety in industry

Soyuzmetall Trade-Union Center. Translated from Metallurg, No. 12, pp. 20–21, December, 1992.     

Reducing the degree of oxidation of low-carbon steel

Krivorozhstal Combine. Translated from Metallurg, No. 8, p. 37, August, 1989.     

Amurstal'-Hancock: Paths to completion of the project

Amurstal' Metallurgical Plant. Translated from Metallurg, No. 2, pp. 15–16, February, 1992.     

Obstacles to the adoption of industrial methods of lining metallurgical furnaces

Donbassdomnaremont Trust. Translated from Metallurg, No. 9, pp. 24–25, No. 9, September, 1988.     

The phase equilibria in W-Fe-Co-Ni system alloys. II. Isotherms of the solidus and the phase composition of alloys containing 10 and 20% (Fe + Co + Ni) at temperatures above 1200°C

Conclusions The isostructural intermediate -phases Fe₇W₅ and Co₇W₆ in the W—Fe—Co system form a continuous series of -solid solutions. In the 1640–1630°C range the L + (Fe₇W₆) peritectic equilibrium in this system changes to a similar L + (Co₇W₆) equilibrium, where is the tungsten-base boundary solution.In the W-Fe-Co-Ni polythermal tetrahedron in the 1470–1460°C range conversion of the L +(Fe₇W₆)+, peritectic equilibrium into the similar L + (Co₇W₆) + , where is the nickel-, -ironcobalt-base boundary solution, occurs.Upon completion of crystallization at 1400°C, the W-Fe-Co system alloys with 10–20% (Fe + Co) have a + phase composition, while the W-Fe-Co-Ni system alloys with 10–20% (Fe + Co + Ni) accordingly have + , + + or + . At temperatures below 1215°C in alloys rich in iron, FeW may be formed instead of -phase and therefore the alloys may have an + FeW, + + FeW, + + + FeW and + + FeW phase composition.Translated from Poroshkovaya Metallurgiya, No. 5(281), pp. 86–89, May, 1986.