Sr<Subscript>3</Subscript>GdLi(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>F: Sm<Superscript>3+</Superscript> phosphor: preparation and luminescence properties evaluation

A series of Sr₃Gd_1?xLi(PO₄)₃F: xSm³⁺ (x?=?0.02, 0.04, 0.06, 0.08) phosphors were synthesized by a high-temperature solid state method. The Sm³⁺ activated Sr₃GdLi(PO₄)₃F phosphors can be efficiently excited by the wavelengths in the range from 350 to 450 nm, which matches perfectly with that of the commercial near-UV LED chips. The optimal doping concentration of Sr₃Gd_1?xLi(PO₄)₃F: xSm³⁺ phosphors was determined to be x?=?0.04, corresponding to the quantum efficiency of 2.23%, and the CIE chromaticity coordinates (x?=?0.5172, y?=?0.4641). The concentration quenching mechanism of Sm³⁺ in Sr₃GdLi(PO₄)₃F host is mainly attributed to the dipole–dipole interaction, which was confirmed by the fluorescent lifetimes. The effect of temperature on the photoluminescence property of Sr₃GdLi(PO₄)₃F: Sm³⁺ was investigated. 90% of the intensity is preserved at 150 °C. In addition, a white light emitting diode (WLED) lamp was fabricated by a 405 nm n-UV LED chip coated with Sr₃Gd_0.96Li(PO₄)₃F:0.04Sm³⁺ phosphor and commercial yellow phosphor (YAG: Ce³⁺) of a certain mass ratio. The present work indicates that the Sr₃GdLi(PO₄)₃F: Sm³⁺ orange–red-emitting phosphors tend to be potential application in n-UV WLED.     

Tunable luminescence properties and energy transfer of single-phase Ca<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>O: Dy<Superscript>3+</Superscript>, Eu<Superscript>2+</Superscript> multi-color phosphors for warm white light

The novel Ca_4?x(PO₄)₂O: xDy³⁺ and Ca_4?x?y(PO₄)₂O: xDy³⁺, yEu²⁺ multi-color phosphors were synthesized by traditional solid-state reaction. The crystal structure, particle morphology, photoluminescence properties and energy transfer process were investigated in detail. The X-ray diffraction (XRD) results demonstrate that the products showed pure monoclinic phase of Ca₄(PO₄)₂O when x < 0.1. The scanning electron microscopy (SEM) indicated that the phosphors were grain-like morphologies with diameters of ~ 3.7–7.0 μm. Under excitation of 345 nm, Dy³⁺-doped Ca₄(PO₄)₂O phosphors showed multi-color emission bands at 410, 481 and 580 nm originated from oxygen vacancies and Dy³⁺. Interestingly, Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors exhibited blue emission band at 481 nm and broad emission band from 530 to 670 nm covering green to red regions. The energy transfer process from Dy³⁺ to Eu²⁺ was observed for the co-doped samples, and the energy transfer efficiency reached to 60% when Eu²⁺ molar concentration was 8%. In particular, warm/cool/day white light with adjustable CCT (2800–6700 K) and high CRI (R_a > 85) can be obtained by changing the Eu²⁺ co-doping contents in Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors. The optimized Ca_3.952(PO₄)₂O: 0.04Dy³⁺, 0.008Eu²⁺ phosphor can achieve the typical white light with CCT of 4735 K and CRI of 87.     

Synthesis and luminescence properties of Tb<Superscript>3+</Superscript>-doped LiMgPO<Subscript>4</Subscript> phosphor

Polycrystalline sample LiMg_(1?x)PO₄:xTb³⁺ (x = 0.001, 0.002, 0.005, 0.01, 0.02) phosphor was synthesized via modified solid state method (MSSM). The prepared sample was characterized through XRD pattern (X-ray diffraction) and SEM (scanning electron microscope). Additionally, photoluminescence (PL), optically stimulated luminescence (OSL), thermoluminescence (TL) and other dosimetric properties including dose linearity, reusability and fading were studied. In OSL mode, sensitivity of prepared phosphor was found to be 2.7 times that of LiMgPO₄:Tb³⁺, B (BARC) phosphor and 4.3 times that of α-Al₂O₃:C (BARC) phosphor. The TL glow consists of overlapping peaks in temperature range of 50–400^°C and first peak (P₁) was observed at 150^°C, second peak (P₂) at 238^°C, third peak (P₃) at 291^°C and fourth peak (P₄) at 356^°C. The TL sensitivity of second peak (P₂) of LiMgPO₄:Tb³⁺ phosphor was compared with α-Al₂O₃:C (BARC) phosphor and found to be 100 times that of the α-Al₂O₃:C (BARC) phosphor. The minimum detectable dose (MDD) was found to be 5.6 μGy. Moreover, photoionization cross-sections, linearity, reusability, fading and kinetic parameters were calculated. Also, photoluminescence spectra of LiMgPO₄: Tb³⁺ shows characteristic green–yellow emission exciting at 224 nm UV source.     

Synthesis,photoluminescence properties of Sr<Subscript>1.95</Subscript>Ba<Subscript>0.05</Subscript>CeO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> for LED applications

The Sr_1.95Ba_0.05 CeO₄:Eu³⁺ phosphors are synthesized by the solid-state reaction method. The samples are characterized using X-ray diffraction (XRD), diffuse reflectance spectroscopy and photoluminescence (PL) spectra. The XRD results reveal that the synthesized phosphors are genuine crystalline and belong to the orthorhombic structure. The intense PL emission is optimized from the PL spectra at various doping concentrations of europium ions. The results indicates that the phosphor can be effectively excited under 264 nm wavelength producing on intense emission spectrum of the synthesis material at 484 nm (blue region). The color purity of the phosphor is confirmed by CIE coordinates (x = 0.217, y = 0.265). The experimental data indicate that the prepared phosphors can be used as blue-emitting material in the field of illuminations and display devices.     

NaF induced enhancement of luminous efficiency in narrow-band red-emitting K<Subscript>2</Subscript>TiF<Subscript>6</Subscript>:Mn<Superscript>4+</Superscript>@NaF phosphors

A series of K₂TiF₆:xMn⁴⁺ @NaF samples were prepared by the cation exchange method in HF solution. Coating effects of NaF on the fluorescent properties of the samples were discussed. It is interesting that NaF has induced enhancement of luminous efficiency for the samples. Mechanism of NaF induced enhanced luminescence effect was suggested. That is that the enhancement effect of NaF coating is mainly attributed to a suitable local distortion of the crystal field surrounding the Mn⁴⁺ activator through doping with NaF. The results indicate that the optimal conditions are x?=?0.07 and w_NaNO3?=?2.5 g. Decay lifetime and the photoluminescence quantum yield of the optimal sample are 5.25 ms and 99.19?±?0.03%, respectively. The chromaticity coordinates of the optimal sample are x?=?0.6926, y?=?0.3073. So, the phosphor emits deep red light, which can be applied for blue light-based white LED.     

Influence of isovalent and heterovalent substitution for Bi<Superscript>3+</Superscript> and Fe<Superscript>3+</Superscript> on the properties of Bi<Subscript>2</Subscript>Fe<Subscript>4</Subscript>O<Subscript>9</Subscript>-based solid solutions

Bi_2–хLa_хFe₄O₉ and Bi₂Fe_4–2xTi_xCo_xO₉ ferrites have been prepared by solid-state reactions at a temperature of 1073 K. X-ray diffraction data indicate that, in the Bi_2–хLa_хFe₄O₉ system, the limiting degree of La³⁺ substitution for Bi³⁺ ions in Bi₂Fe₄O₉ does not exceed 0.05 and that the limiting degree of substitution in the Bi₂Fe_4–2xTi_xCo_xO₉ system lies in the range 0.05 < x < 0.1. The specific magnetization and specific magnetic susceptibility of the samples have been measured at temperatures from 5 to 300 K in a magnetic field of 0.86 T. The field dependences of magnetization obtained for the Bi_2–хLa_хFe₄O₉ and Bi₂Fe_4–2xTi_xCo_xO₉ ferrites at temperatures of 300 and 5 K demonstrate that partial isovalent substitution of La³⁺ for Bi³⁺ ions in Bi₂Fe₄O₉ and heterovalent substitution of Ti⁴⁺ and Co²⁺ ions for two Fe³⁺ ions leads to partial breakdown of the antiferromagnetic state and nucleation of a ferromagnetic state.     

Electrical conductivity of Cs<Subscript>3</Subscript>PO<Subscript>4</Subscript> doped with trivalent cations

Cs_{3 ? 3x} M _x PO₄ (M = Sc, Y, La, Sm, Nd) solid electrolytes have been synthesized, their phase composition has been determined, and their electrical conductivity has been measured as a function of temperature. In all of the systems, we have identified cesium orthophosphate based solid solutions. Above ～550°C, the solid solutions are isostructural with the high-temperature, cubic phase of Cs₃PO₄. They offer high cesium ion conductivity owing to the formation of cesium vacancies via 3Cs⁺ → M³⁺ substitutions and the decrease in phase transition temperature. The conductivity of the synthesized solid solutions, (4.8?5.6) × 10^?3 S/cm at 300°C and (1.6?1.9) × 10^?1 S/cm at 800°C, is at the level of earlier studied Cs_{3 ? 2x} M _x ^II PO₄ solid electrolytes.     

Effects of Ge<Superscript>4+</Superscript> acceptor dopant on sintering and electrical properties of (K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)NbO<Subscript>3</Subscript> lead-free piezoceramics

Lead-free (K_0.5Na_0.5)(Nb_1-xGe _x )O₃ (KNN-xGe, where x = 0-0.01) piezoelectric ceramics were prepared by conventional ceramic processing. The effects of Ge⁴⁺ cation doping on the phase compositions, microstructure and electrical properties of KNN ceramics were studied. SEM images show that Ge⁴⁺ cation doping improved the sintering and promoted the grain growth of the KNN ceramics. Dielectric and ferroelectric measurements proved that Ge⁴⁺ cations substituted Nb⁵⁺ ions as acceptors, and the Curie temperature (T_C) shows an almost linear decrease with increasing the Ge⁴⁺ content. Combining this result with microstructure observations and electrical measurements, it is concluded that the optimal sintering temperature for KNN-xGe ceramics was 1020°C. Ge⁴⁺ doping less than 0.4 mol.%can improve the compositional homogeneity and piezoelectric properties of KNN ceramics. The KNN-xGe ceramics with x = 0.2% exhibited the best piezoelectric properties: piezoelectric constant d₃₃ = 120 pC/N, planar electromechanical coupling coefficient k_p = 34.7%, mechanical quality factor Q_m = 130, and tanδ = 3.6%.     

Electric-field effect on crystal growth in the Li<Subscript>3</Subscript>PO<Subscript>4</Subscript>-Li<Subscript>4</Subscript>GeO<Subscript>4</Subscript>-Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-LiF system

We have studied the electric-field effect on crystallization processes in the Li₃PO₄-Li₄GeO₄-Li₂MoO₄-LiF system. In zero field, Li_3+x P_1?x Ge _x O₄ (x = 0.31) crystals were grown on the cathode under the conditions of this study. At low applied voltages (≤ 0.5 V), we obtained Li₂MoO₄, Li₂GeO₃, and Li_1.3Mo₃O₈. In the range V = 0.5–1 V, crystals of Li_3+x P_1?x Ge _x O₄ solid solutions with x = 0.17, 0.25, 0.28, 0.29, and 0.36 were obtained. An applied electric field was shown to reduce the melting temperature of the starting mixtures and the crystallization onset temperature.     

Enhanced red-emitting phosphor Na<Subscript>2</Subscript>Ca<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>8</Subscript>:Eu<Superscript>3+</Superscript> by charge compensation

A series of novel red-emitting Na₂Ca_3???x Si₂O₈:xEu³⁺ phosphors were synthesized by solid state reactions. The phosphors can strongly absorb 395 nm light, and show red emission with a good color purity. The excitation and emission spectra properties of Na₂Ca₃Si₂O₈:Eu³⁺ were characterized. Na₂Ca₃Si₂O₈:Eu³⁺ with self-compensated and alkali metal ions charge compensated approaches (2Ca²⁺→Eu³⁺ + M⁺, M?=?Li⁺, Na⁺, K⁺) have investigated, which found that the red emission of luminescent intensity can be greatly enhanced, and shows superior luminescent property to the commercial Y₂0₃S:Eu³⁺. The present work implies that the efficient charge compensated phosphors are promising candidates as red-emitting phosphor for w-LEDs.     

Crystallization from high-temperature solutions in the K<Subscript>2</Subscript>O-P<Subscript>2</Subscript>O<Subscript>5</Subscript>-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> system

We have studied general trends of crystallization from high-temperature solutions in the K₂O-P₂O₅-V₂O₅-Bi₂O₃ system at P/V = 0.5?2.0, K/(P + V) = 0.7?1.4, and Bi₂O₃ contents from 25 to 50 wt % and identified the stability regions of BiPO₄, K₃Bi₅(PO₄)₆, K₂Bi₃O(PO₄)₃, and K₃Bi₂(PO₄)_{3 ? x} (VO₄) _x (x = 0?3) solid solutions. The synthesized compounds have been characterized by X-ray powder diffraction and IR spectroscopy, and the structure of two solid solutions has been determined by single-crystal X-ray diffraction (sp. gr. C ₂/c): K₃Bi₂(PO₄)₂(VO₄), a = 13.8857(8), b = 13.5432(5), c = 6.8679(4) Å, β = 114.031(7)°; K₃Bi₂(PO₄)_1.25(VO₄)_1.75, a = 13.907(4), b = 13.615(2), c = 6.956(2) Å, β = 113.52(4)°.     

Strong up-conversion luminescence and electrical properties of SrBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> multifunctional ceramics by Er<Superscript>3+</Superscript> doping

Novel green-emitting piezoelectric ceramics of SrBi_4?x Er _x Ti₄O₁₅ (SBT-xEr) were prepared. Strong up-conversion with bright green (524 and 548 nm) and a relatively weak red (660 nm) emission bands were obtained under 980 nm excitation at room temperature, which is attributed to the intra 4f–4f electronic transition of (²H_11/2, ⁴S_3/2)–⁴I_15/2 and the transition from ⁴F_9/2 to ⁴I_15/2 of Er³⁺ ions, respectively. Simultaneously, Er³⁺ doping promotes the electrical properties. At 0.8 mol%Er, the optimal electric properties with high Curie temperature of T _c?~527?°C, large remanent polarization of 2P _r?~14.92 μC/cm² and piezoelectric constant of d ₃₃?~17 pC/N was achieved. As a multifunctional material, Er³⁺ doped SBT showed a great potential to be used in 3D-display, bio-imaging, solid state laser and optical temperature sensor.     

Temperature effect on the photoluminescence intensity and Eu<Superscript>2+</Superscript> excited state lifetime in EuGa<Subscript>2</Subscript>S<Subscript>4</Subscript> and EuGa<Subscript>2</Subscript>S<Subscript>4</Subscript>:Er<Superscript>3+</Superscript>

The photoluminescence (PL) spectra and Eu²⁺ excited state lifetime of EuGa₂S₄ and EuGa₂S₄:Er³⁺ have been studied in the range 78–500 K. The spectra show a band at 545 nm, due to the 4f ⁶5d → 4f ⁷(⁸ S _7/2) transition. With increasing temperature, the full width at half maximum Γ(T) of the PL band of EuGa₂S₄ and EuGa₂S₄:Er³⁺ crystals increases from 0.15 to 0.22 and from 0.13 to 0.19 eV, respectively. Over the entire temperature range studied, Γ(T) is a linear function of T ^1/2. The 545-nm emission intensity and Eu²⁺ excited state lifetime in EuGa₂S₄ and EuGa₂S₄:Er³⁺ vary exponentially with temperature. The luminescence quenching energies evaluated from the Arrhenius plots of I(10³/T) and τ(10³/T) coincide (0.10 eV) within the error of determination.     

Synthesis and luminescence properties of LiBaPO<Subscript>4</Subscript>:Bi<Superscript>3+</Superscript> yellow-emitting phosphor for solid-state lighting

Novel LiBaPO₄:Bi³⁺ yellow-emitting phosphor is synthesized by high temperature solid-state reaction method in air. With excitation 260 nm, LiBaPO₄:Bi³⁺ phosphor emits yellow light with the chromaticity coordinate (0.4272, 0.4657) and color rendering index 77.7. Emission band peaking at ~?588 nm of LiBaPO₄:Bi³⁺ phosphor in the range of 400–790 nm is attributed to the ³P₁ → ¹S₀ electron transition of Bi³⁺ ion. Excitation band monitored at 588 nm in the range of 220–300 nm is assigned to the ¹S₀ → ³P₁ electron transition of Bi³⁺ ion. The optimal Bi³⁺ ion concentration in LiBaPO₄:Bi³⁺ phosphor is ~?1.0 mol%. Time resolved spectra and fluorescence lifetime data confirm that there is only Bi³⁺ ion luminous center in LiBaPO₄:Bi³⁺ phosphor. The luminous mechanism is analyzed by configurational coordinate diagram of Bi³⁺ ion. The experiment results are helpful to develop other new Bi³⁺-doped optical materials for solid-state lighting.     

New,thermally stable Gd<Subscript>11</Subscript>(GeO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>O<Subscript>10</Subscript>-based upconversion phosphors

A series of Gd_11–x–y Yb _x Er _y GeP₃O₂₆ germanate phosphates differing in the ratio of the Yb³⁺ and Er³⁺ active ions have been synthesized, and their luminescence spectra have been measured. According to X-ray diffraction characterization results, all of the synthesized germanate phosphates are single-phase and have a triclinic structure (sp. gr. P1). We have measured upconversion luminescence spectra due to the Er^{3+ 2}H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 radiative transitions in the synthesized gadolinium ytterbium erbium germanate phosphates and determined the luminescence upconversion energy yield (B _en) in Gd_11–x–y Yb _x Er _y GeP₃O₂₆. The effects of the concentrations and ratio of the dopants in the Gd₁₁(GeO₄)(PO₄)₃O₁₀ germanate phosphate host on B _en and the ratio of the luminescence intensities in the red and green spectral regions (R/G) have been assessed.     

Synthesis and photoluminescence study of narrow-band UVB-emitting LiSr<Subscript>4</Subscript>(BO<Subscript>3</Subscript>)<Subscript>3</Subscript>:Gd<Superscript>3+</Superscript>, Pr<Superscript>3+</Superscript> phosphor

A series of Pr³⁺, Gd³⁺ and Pr³⁺–Gd³⁺-doped inorganic borate phosphors LiSr₄(BO₃)₃ were successfully synthesized by a modified solid-state diffusion method. The crystal structures and the phase purities of samples were characterized by powder X-ray diffraction. Surface morphology of the sample was studied by scanning electronic microscopy (SEM). The optimal concentrations of dopant Gd³⁺ ions in compound LiSr₄(BO₃)₃ were determined through the measurements of photoluminescence (PL) spectra of phosphors. Gd³⁺-doped phosphors LiSr₄(BO₃)₃ show strong band absorption in UV spectral region and narrow-band UVB emission under the excitation of 276 nm was only due to ⁶P _J → ⁸S_7/2 transition of Gd³⁺ ions. The effect of Pr³⁺ ion on excitation of LiSr₄(BO₃)₃:Gd³⁺ was also studied. The excitation of LiSr₄(BO₃)₃:Gd³⁺, Pr³⁺ gives a broad-band spectra, which show very good overlap with the Hg 253.7 nm line. The photoluminescence spectra of LiSr₄(BO₃)₃ with different doping concentrations Pr³⁺ and keeping the concentration of Gd³⁺ constant at 0.03 mol have also been studied. The emission intensity of LiSr₄(BO₃)₃:Pr³⁺–Gd³⁺ phosphors increases with increasing Pr³⁺ doping concentration and reaches a maximum at 0.01 mol. From the photoluminescence study of LiSr₄(BO₃)₃:Gd³⁺, Pr³⁺ we conclude that there was efficient energy transfer from Pr³⁺→ Gd³⁺ ions in LiSr_4?x?y Pr _x Gd _y (BO₃)₃ phosphors.     

Electrical Conductivity and Electrochemical Characteristics of Na<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Based NASICON-Type Materials

NASICON-type materials with the compositions Na₃V_2–xAl_x(PO₄)₃, Na₃V_{2 - x}Fe_x(PO₄)₃, Na_{3 + x}V_2–xNi_x(PO₄)₃, and Na₃V_{2 - x}Cr_x(PO₄)₃ (x = 0, 0.03, 0.05, and 0.1) have been prepared and characterized by X-ray diffraction analysis, electron microscopy, and impedance spectroscopy. The results demonstrate that the highest electrical conductivity among the samples studied is offered by the material doped with 5% Fe: Na₃V_1.9Fe_0.1(PO₄)₃. The activation energy for low-temperature conduction in the doped materials decreases from 84 ± 2 to 54 ± 1 kJ/mol and that for high-temperature conduction is ~33 kJ/mol. The discharge capacity of Na₃V_1.9Fe_0.1(PO₄)₃/C under typical working conditions of cathodes of sodium ion batteries has been shown to exceed that of Na₃V₂(PO₄)₃/C. The capacity of the more porous material prepared by the Pechini process (Na₃V_1.9Fe_0.1(PO₄)₃/C-{II}) approaches the theoretical one at a low charge–discharge rate and retains its high level as the charge rate is raised (its discharge capacity was 117.6, 108.8, and 82.6 mAh/g at a discharge rate of 0.1C, 2C, and 8C, respectively).     

Magnetic properties of LaInO<Subscript>3</Subscript>-based perovskite-structure photoluminescent materials doped with Nd<Superscript>3+</Superscript>, Cr<Superscript>3+</Superscript>, and Mn<Superscript>3+</Superscript> ions

Single-phase ceramic samples of La_1–xNd_xInO₃ (0.007 ≤ x ≤ 0.05), LaIn_0.99M_0.01O₃, and La_0.95Nd_0.05In_0.995M_0.005O₃ (M = Cr³⁺ and Mn³⁺) solid solutions have been prepared by solid-state reactions, and their crystal structure, magnetic field dependences of their specific magnetization at 5 and 300 K, and temperature dependences of their molar magnetic susceptibility have been studied. It has been shown that the 300-K specific magnetization of the La_1–xNd_xInO₃ (x = 0.02, 0.05), La_0.95Nd_0.05In_0.995M_0.005O₃ (M = Cr³⁺ and Mn³⁺), and LaIn_0.99Mn_0.01O₃ solid solutions increases linearly with increasing magnetic field strength up to 14 T and that the magnitude of the 300-K specific magnetization of the La_0.993Nd_0.007InO₃ and LaIn_0.99Cr_0.01O₃ solid solutions increases linearly, but they have diamagnetic magnetization. At a temperature of 5 K, the magnetization of all the indates studied here increases nonlinearly with increasing magnetic field strength, gradually approaching magnetic saturation, without, however, reaching it in a magnetic field of 14 T. In the temperature range where the Curie–Weiss law is obeyed (5–30 K), the effective magnetic moments obtained for the Nd³⁺ ion (\({\mu _{effN{d^{3 + }}}}\)) in the La_1–xNd_xInO₃ solid solutions with x = 0.007, 0.02, and 0.05 are 2.95μ_B, 3.09μ_B, and 2.75μ_B, respectively, which is well below the theoretical value \({\mu _{effN{d^{3 + }}}}\)= 3.62μ_B. The effective magnetic moments of the Cr³⁺ and Mn³⁺ ions in the LaIn_0.99Cr_0.01O₃ and LaIn_0.99Mn_0.01O₃ solid solutions are 3.87μ^B and 5.11μ^B, respectively, and differ only slightly from the theoretical values \({\mu _{effC{r^{3 + }}}}\)= 3.87μ^B and \({\mu _{effM{n^{3 + }}}}\)= 4.9μ^B.     

Large enhancement of upconversion luminescence in Er<Superscript>3+</Superscript>/In<Superscript>3+</Superscript>:Ba<Subscript>0.85</Subscript>Ca<Subscript>0.15</Subscript>TiO<Subscript>3</Subscript> lead-free piezoelectric ceramics

A series of In³⁺-doped Ba_0.85Ca_0.15TiO₃:0.75%Er³⁺/xIn³⁺ (BCT:Er/xIn) lead-free piezoelectric ceramics with excellent upconversion luminescence were synthesized by the solid state reaction method. The effects of In³⁺ content on the crystal structure, ferroelectric, dielectric, piezoelectric, and upconversion luminescence properties were systematically studied. Under 980 nm excitation, a giant enhancement of the green emission (550 nm) by 10 times is achieved upon 2.5% mol In³⁺ doping, which is rarely observed in rare-earth ions-doped perovskite ferroelectric materials. The ultraviolet-visible-near infrared absorption measurements show that the In³⁺ doping may improve the dissolution of Er³⁺ ions and modify the isolate-/clustered-Er³⁺ ratio for x?≤?2.5%, resulting in the enhancement of the absorption cross-section, thereby contributing to the enhancement of green luminescence. Unfortunately, the In³⁺ doping suppresses the ferroelectric and piezoelectric properties of the BCT:Er/xIn ceramics. This problem can be resolved by adding a small amount (1 mol%) of Yb³⁺ to the BCT:Er/xIn ceramics to restore their good ferroelectric and piezoelectric properties. Such In³⁺ and rare-earth ions co-doped ceramics with greatly enhanced upconversion luminescence and good ferroelectricity and piezoelectricity may have potential applications in electro-optical devices.     

Rapid synthesis and enhancement in down conversion emission properties of BaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>,RE<Superscript>3+</Superscript> (RE<Superscript>3+</Superscript>=Y,Pr) nanophosphors

BaAl₂O₄:Eu²⁺,RE³⁺ (RE³⁺=Y, Pr) down conversion nanophosphors were prepared at 600 °C by a rapid gel combustion technique in presence of air using boron as flux and urea as a fuel. A comparative study of the prepared materials was carried out with and without the addition of boric acid. The boric acid was playing the important role of flux and reducer simultaneously. The peaks available in the XPS spectra of BaAl₂O₄:Eu²⁺ at 1126.5 and 1154.8 eV was ascribed to Eu²⁺(3d _5/2) and Eu²⁺(3d _3/2) respectively which confirmed the presence of Eu²⁺ ion in the prepared lattice. Morphology of phosphors was characterized by tunneling electron microscopy. XRD patterns revealed a dominant phase characteristics of hexagonal BaAl₂O₄ compound and the presence of dopants having unrecognizable effects on basic crystal structure of BaAl₂O₄. The addition of boric acid showed a remarkable change in luminescence properties and crystal size of nanophosphors. The emission spectra of phosphors had a broad band with maximum at 490–495 nm due to electron transition from 4f ⁶5d ¹ → 4f ⁷ of Eu²⁺ ion. The codoping of the rare earth (RE³⁺=Y, Pr) ions help in the enhancement of their luminescent properties. The prepared phosphors had brilliant optoelectronic properties that can be properly used for solid state display device applications.