Synthesis and luminescence properties of Eu<Superscript>2+</Superscript>-doped Li<Subscript>2</Subscript>SrSiO<Subscript>4</Subscript>

We have studied the luminescence spectra of Li₂Sr_{1 − x} Eu _x SiO₄ (x = 0.0001–0.01) solid solutions prepared by solid-state reactions and a sol-gel process in a reducing atmosphere. The spectra show a broad band in the range 500–700 nm, centered at 578 nm, which is due to the 4f ⁶5d → 4f ⁷ transition. The luminescence excitation spectrum shows, in addition to bands due to Eu²⁺ 4f ⁷ → 4f ⁶5d transitions, a strong band centered at 174 nm, attributable to absorption in the SiO₄⁴⁻ group.     

Synthesis and luminescence properties of LiBaPO<Subscript>4</Subscript>:Bi<Superscript>3+</Superscript> yellow-emitting phosphor for solid-state lighting

Novel LiBaPO₄:Bi³⁺ yellow-emitting phosphor is synthesized by high temperature solid-state reaction method in air. With excitation 260 nm, LiBaPO₄:Bi³⁺ phosphor emits yellow light with the chromaticity coordinate (0.4272, 0.4657) and color rendering index 77.7. Emission band peaking at ~?588 nm of LiBaPO₄:Bi³⁺ phosphor in the range of 400–790 nm is attributed to the ³P₁ → ¹S₀ electron transition of Bi³⁺ ion. Excitation band monitored at 588 nm in the range of 220–300 nm is assigned to the ¹S₀ → ³P₁ electron transition of Bi³⁺ ion. The optimal Bi³⁺ ion concentration in LiBaPO₄:Bi³⁺ phosphor is ~?1.0 mol%. Time resolved spectra and fluorescence lifetime data confirm that there is only Bi³⁺ ion luminous center in LiBaPO₄:Bi³⁺ phosphor. The luminous mechanism is analyzed by configurational coordinate diagram of Bi³⁺ ion. The experiment results are helpful to develop other new Bi³⁺-doped optical materials for solid-state lighting.     

Organic additive assisted hydrothermal synthesis and photoluminescence properties of CeF<Subscript>3</Subscript>:Tb<Superscript>3+</Superscript> and NaCeF<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript> nanoparticles

A series of Tb³⁺ doped CeF₃ and NaCeF₄ nanoparticles with different morphology and dimension were synthesized via hydrothermal method. Different organic additives, including sodium dodecyl sulfonate (SDS), polyvinylpyrrolidone (PVP), cetyltrimethyl ammonium bromide (CTAB), oleic acid (OA), polyethylene glycol (PEG), trisodium citrate (Cit) were introduced to control the crystallite size and morphology. Powder X-ray diffraction (PXRD), fourier transform infra-red spectra (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and down-conversion (DC) photoluminescence spectra were used to characterize the samples. The emission peaks of all the prepared samples centered at 490, 545, 585 and 621 nm which can be ascribed to the ⁵D₄→⁷F_J (J?=?6, 5, 4, 3) transitions respectively of Tb³⁺ ion. However, emission intensities are strongly controlled by morphology and particle sizes which are influenced by different organic additives used in synthesis. Moreover, the crystal growth process was monitored through a series of time-dependent experiments and a possible formation mechanism has been proposed.     

Hydrothermal synthesis and luminescence properties of core-shell-structured PS@SrCO<Subscript>3</Subscript>:Tb<Superscript>3+</Superscript> spherical particles

Nanocrystalline SrCO₃:Tb³⁺ phosphor layers were coated on monodisperse and spherical polystyrene particles by a typical hydrothermal synthesis without further annealing treatment, resulting in the formation of core-shell-structured polystyrene@SrCO₃:Tb³⁺ particles. X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, photoluminescence, as well as lifetimes were employed to characterize the resulting composite particles. Under ultraviolet excitation, the polystyrene@SrCO₃:Tb³⁺ phosphors show the characteristic ⁵D₄–⁷F _J (J = 6, 5, 4, 3) emission lines with green emission ⁵D₄–⁷F₅ (544 nm) as the most prominent group. The obtained core-shell phosphors are potentially applied in fluorescent lamps.     

Synthesis and luminescence properties of a novel UV-emitting phosphor Sr<Subscript>3</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript>:Ce<Superscript>3+</Superscript>

The ultraviolet (UV)-emitting Sr₃P₄O₁₃:Ce³⁺ phosphors were synthesized via the solid-state reaction method, and their structural, morphological and luminescence properties were characterized by X-ray diffraction analysis, scanning electron microscopy, photoluminescence spectroscopy. The obtained results indicate that these phosphors can be effectively excited by short-wavelength ultraviolet (<300 nm), and exhibit long-wavelength ultraviolet (300–380 nm) emission with nanosecond-level fluorescence lifetime corresponding to the parity-allowed 5d–4f transitions of Ce³⁺. The concentration-quenching phenomenon of Ce³⁺ in Sr₃P₄O₁₃ host was also studied, in which the critical energy transfer distance between Ce³⁺ ions and concentration quenching mechanism were determined.     

Synthesis and luminescence properties of a novel Eu<Superscript>3+</Superscript>, Tb<Superscript>3+</Superscript> co-doped Al<Subscript>18</Subscript>B<Subscript>4</Subscript>O<Subscript>33</Subscript> whiskers by a gel nano-coating method

Al₁₈B₄O₃₃:Eu³⁺, Tb³⁺ whiskers have been successfully prepared by a simple gel nano-coating method using aluminum isopropoxide as the starting materials. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL), and thermogravimetric analysis (TGA) were used characterize the samples. The results show coexistence of the crystal phase Al₁₈B₄O₃₃, amorphous phase, and Eu³⁺, Tb³⁺ ions of the samples with initial addition Al/B ratios from 3 to 1 are incorporated into the amorphous phase. The Al₁₈B₄O₃₃:Eu³⁺, Tb³⁺ whiskers are very straight with an average diameter of 600 nm and lengths ranging from 5 to 10 μm. Under ultraviolet excitation at 365 nm, samples show mainly exhibit the characteristic emission of Eu³⁺ corresponding to \( ^{ 5} {\text{D}}_{ 0} \to {\text{F}}_{ 1 , 2} \) transitions due to an efficient energy transfer occurs from Tb³⁺ to Eu³⁺.     

Morphology and luminescent properties of Al<Superscript>3+</Superscript>/Mg<Superscript>2+</Superscript>-doped Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> phosphor

Al³⁺/Mg²⁺ doped Y₂O₃:Eu phosphor was synthesized by the glycine-nitrate solution combustion method. In contrast to Y₂O₃:Eu which showed an irregular shape of agglomerated particles (the mean particle size >10 μm), the morphology of Al³⁺/Mg²⁺ doped Y₂O₃:Eu crystals was quite regular. Al³⁺/Mg²⁺ substituting Y³⁺ in Y₂O₃:Eu resulted in an obvious decrease of the particle size. Meanwhile, higher the Al³⁺/Mg²⁺ concentration, smaller the particle size. In particular, the introduction of Al³⁺ ion into Y₂O₃ lattice induced a remarkable increase of PL and CL intensity. While, for Mg²⁺ doped Y₂O₃:Eu samples, their PL and CL intensities decreased. The reason that causes the variation of PL and CL properties for Al³⁺ and Mg²⁺ doped Y₂O₃:Eu crystals was concluded to be related to sites of Al³⁺ and Mg²⁺ ions inclined to take and the difference of ion charge.     

Synthesis and luminescence properties of a Li<Subscript>3</Subscript>BaCaY<Subscript>3</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>8</Subscript>:Er<Superscript>3+</Superscript> phosphor with a layered scheelite-like structure

A Li₃BaCaY₃(MoO₄)₈:Er³⁺ phosphor with a scheelite-like structure (sp. gr. C2/c) has been synthesized and its luminescence properties have been studied. The phosphor has been characterized by X-ray diffraction, differential thermal analysis, and IR spectroscopy.     

Synthesis and luminescent characterization of YAl<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript> phosphors

YAl₃(BO₃)₄:Tb³⁺ phosphors were fabricated by the sol–gel method. The phosphor showed prominent luminescence in green due to the magnetic dipole transition of ⁵D₄–⁷F₅. Structural characterization of the luminescent material was carried out with X-ray powder diffraction (XRD) analysis. Luminescence properties were analyzed by measuring the excitation and photoluminescence spectra. Photoluminescence measurements indicated that the phosphor exhibited bright green emission at about 541 nm under UV excitation. It is shown that the 11% of doping concentration of Tb³⁺ ions in YAl₃(BO₃)₄:Tb³⁺ phosphors is optimum.     

Sr<Subscript>3</Subscript>GdLi(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>F: Sm<Superscript>3+</Superscript> phosphor: preparation and luminescence properties evaluation

A series of Sr₃Gd_1?xLi(PO₄)₃F: xSm³⁺ (x?=?0.02, 0.04, 0.06, 0.08) phosphors were synthesized by a high-temperature solid state method. The Sm³⁺ activated Sr₃GdLi(PO₄)₃F phosphors can be efficiently excited by the wavelengths in the range from 350 to 450 nm, which matches perfectly with that of the commercial near-UV LED chips. The optimal doping concentration of Sr₃Gd_1?xLi(PO₄)₃F: xSm³⁺ phosphors was determined to be x?=?0.04, corresponding to the quantum efficiency of 2.23%, and the CIE chromaticity coordinates (x?=?0.5172, y?=?0.4641). The concentration quenching mechanism of Sm³⁺ in Sr₃GdLi(PO₄)₃F host is mainly attributed to the dipole–dipole interaction, which was confirmed by the fluorescent lifetimes. The effect of temperature on the photoluminescence property of Sr₃GdLi(PO₄)₃F: Sm³⁺ was investigated. 90% of the intensity is preserved at 150 °C. In addition, a white light emitting diode (WLED) lamp was fabricated by a 405 nm n-UV LED chip coated with Sr₃Gd_0.96Li(PO₄)₃F:0.04Sm³⁺ phosphor and commercial yellow phosphor (YAG: Ce³⁺) of a certain mass ratio. The present work indicates that the Sr₃GdLi(PO₄)₃F: Sm³⁺ orange–red-emitting phosphors tend to be potential application in n-UV WLED.     

Preparation,spectroscopic properties and enhanced luminescence of Tb<Superscript>3+</Superscript>-doped LuAG phosphors and transparent ceramics by introduction of Sc<Superscript>3+</Superscript>

Tb-doped LuAG(lutetium aluminum garnet) and LuSAG(lutetium scandium-aluminum garnet) precursors were synthesized through a co-precipitation process, using ammonium hydrogen carbonate as precipitator. Single-phase cubic LuAG/Tb and LuSAG/Tb phosphors were obtained after calcination at 1000 and 1200 °C, respectively. These powders could be easily sintered into corresponding transparent LuAG/Tb and LuSAG/Tb ceramics in H₂ atmosphere at 1850 °C. The PL excitation and emission spectra were recorded for both phosphors and ceramics. Emission spectra of all materials were found to be typical for Tb³⁺, resulting from radiative relaxation of D level. Both the Tb-doped LuSAG phosphors and ceramics show higher efficient luminescence than LuAG , especially the transparent Tb-doped LuSAG ceramic shows about 150% higher luminescence intensity than transparent Tb-doped LuAG ceramic.     

Synthesis and thermoluminescence properties of CdB<Subscript>4</Subscript>O<Subscript>7</Subscript>:Tb<Superscript>3+</Superscript> and CdB<Subscript>4</Subscript>O<Subscript>7</Subscript>:Mn<Superscript>2+</Superscript>

Polycrystalline samples of undoped, terbium-doped (CdB₄O₇:Tb³⁺), and manganese-doped (CdB₄O₇:Mn²⁺) cadmium tetraborate have been prepared by solid-state reactions at 850°C. Using differential scanning calorimetry and X-ray diffraction, we have determined the melting point of CdB₄O₇ (t _m = 976°C) and shown that this compound melts incongruently. The observed monotonic decrease in the orthorhombic cell parameters of the doped materials indicates the formation of substitutional solid solutions (sp. gr. Pbca). The thermoluminescence intensity of the doped materials has been shown to depend on the nature and concentration of the activators and the irradiation time.     

Synthesis and photoluminescence study of narrow-band UVB-emitting LiSr<Subscript>4</Subscript>(BO<Subscript>3</Subscript>)<Subscript>3</Subscript>:Gd<Superscript>3+</Superscript>, Pr<Superscript>3+</Superscript> phosphor

A series of Pr³⁺, Gd³⁺ and Pr³⁺–Gd³⁺-doped inorganic borate phosphors LiSr₄(BO₃)₃ were successfully synthesized by a modified solid-state diffusion method. The crystal structures and the phase purities of samples were characterized by powder X-ray diffraction. Surface morphology of the sample was studied by scanning electronic microscopy (SEM). The optimal concentrations of dopant Gd³⁺ ions in compound LiSr₄(BO₃)₃ were determined through the measurements of photoluminescence (PL) spectra of phosphors. Gd³⁺-doped phosphors LiSr₄(BO₃)₃ show strong band absorption in UV spectral region and narrow-band UVB emission under the excitation of 276 nm was only due to ⁶P _J → ⁸S_7/2 transition of Gd³⁺ ions. The effect of Pr³⁺ ion on excitation of LiSr₄(BO₃)₃:Gd³⁺ was also studied. The excitation of LiSr₄(BO₃)₃:Gd³⁺, Pr³⁺ gives a broad-band spectra, which show very good overlap with the Hg 253.7 nm line. The photoluminescence spectra of LiSr₄(BO₃)₃ with different doping concentrations Pr³⁺ and keeping the concentration of Gd³⁺ constant at 0.03 mol have also been studied. The emission intensity of LiSr₄(BO₃)₃:Pr³⁺–Gd³⁺ phosphors increases with increasing Pr³⁺ doping concentration and reaches a maximum at 0.01 mol. From the photoluminescence study of LiSr₄(BO₃)₃:Gd³⁺, Pr³⁺ we conclude that there was efficient energy transfer from Pr³⁺→ Gd³⁺ ions in LiSr_4?x?y Pr _x Gd _y (BO₃)₃ phosphors.     

Microwave synthesis and luminescence properties of YVO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript>

Europium-doped YVO₄ phosphors have been synthesized using microwave radiation of 700 W power. The uniformity and high rate of microwave heating, as well as “nonthermal” effects of microwave radiation, considerably accelerate the decomposition of precursors and YVO₄:Eu³⁺ synthesis. The europium concentration was varied from 1 to 8 at %. The luminescence intensity of YVO₄:Eu³⁺ was shown to depend on Eu³⁺ concentration, with a maximum at 8 at % Eu³⁺. According to transmission electron microscopy data, the synthesized phosphors consist of nanoparticles 6 to 8 nm in size, with an appreciable degree of agglomeration.     

Optical properties of undoped and Yb<Superscript>3+</Superscript>-doped YAl<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> crystals

The ordinary and extraordinary refractive indices of nominally undoped and Yb³⁺-doped (7 at %) YAl₃(BO₃)₄ crystals have been measured in the visible range at temperatures from 20 to 400°C. The refractive indices are found to increase with temperature. The thermo-optic coefficients are on the order of ～10^?6. The temperature dependences of the refractive indices show a number of anomalies, suggestive of an incommensurate system exhibiting devil’s staircase behavior.     

Luminescence properties and energy transfer of co-doped Ba<Subscript>3</Subscript>GdNa(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>F:Ce<Superscript>3+</Superscript>,Tb<Superscript>3+</Superscript> green-emitting phosphors

Phase pure Ce³⁺ and Tb³⁺ singly doped and Ce³⁺/Tb³⁺ co-doped Ba₃GdNa(PO₄)₃F samples have been synthesized via the high temperature solid-state reaction. The crystal structures, photoluminescence properties, fluorescence lifetimes, thermal properties and energy transfer of Ba₃GdNa(PO₄)₃F:Ce³⁺,Tb³⁺ were systematically investigated. Rietveld structure refinement indicates that Ba₃GdNa(PO₄)₃F crystallizes in a hexagonal crystal system with the space group P-6. For the co-doped Ba₃GdNa(PO₄)₃F:Ce³⁺,Tb³⁺ samples, the emission color can be tuned from blue to green by varying the doping concentration of the Tb³⁺ ions. The intense green emission was realized in the Ba₃GdNa(PO₄)₃F:Ce³⁺,Tb³⁺ phosphors on the basis of the highly efficient energy transfer from Ce³⁺ to Tb³⁺. Also the energy transfer mechanism has been confirmed to be quadrupole–quadrupole interaction, which can be validated via the agreement of critical distances obtained from the concentration quenching (13.84 Å). These results show that the developed phosphors may possess potential applications in near-ultraviolet pumped white light-emitting diodes.     

Synthesis and properties of AgTi<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>-based NASICON-type phosphates doped with Nb<Superscript>5+</Superscript>, Zr<Superscript>4+</Superscript>, and Ga<Superscript>3+</Superscript>

We have synthesized materials based on a silver titanium phosphate with partial substitution of tri-, tetra-, or pentavalent cations for titanium: Ag_1±x Ti_2−x M _x (PO₄)₃ (M = Nb⁵⁺, Ga³⁺) and AgTi_2−x Zr _x (PO₄)₃. The materials have been characterized by X-ray diffraction and impedance spectroscopy and have been shown to have small thermal expansion coefficients. Their ionic conductivity has been determined. Silver ions in these materials are difficult to replace with protons.     

Phase conversion and spectral properties of long lasting phosphor Zn<Subscript>3</Subscript> (PO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Mn<Superscript>2+</Superscript>, Ga<Superscript>3+</Superscript>

A red long lasting phosphor Zn₃(PO₄)₂:Mn²⁺,Ga³⁺ (ZPMG) was prepared by ceramic method, and phase conversion and spectral properties were investigated. Results indicated that the phase conversion from α-Zn₃(PO₄)₂, β-Zn₃(PO₄)₂ toγ-Zn₃(PO₄)₂ occurs with different manganese concentration incorporated and sinter process. The structural change induced by the phase transformation results in a remarkable difference in the spectral properties. The possible luminescence mechanism for this red LLP with different forms has been illustrated.     

Color-tunable luminescence properties of Sm<Superscript>3+</Superscript>/Dy<Superscript>3+</Superscript> co-doped NaLa(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript> phosphors and their energy transfer mechanism

The Sm³⁺, Dy³⁺ doped and Sm³⁺/Dy³⁺ co-doped NaLa(MoO₄)₂ spherical phosphors were hydrothermally synthesized by the EDTA-2Na mediated method. Under the excitation of 297 nm, the quenching concentration of Sm³⁺ in NaLa(MoO₄)₂ host was determined to be 13%, and the concentration quenching mechanism was discussed to be the electric quadrupole–quadrupole interaction. After Sm³⁺ and Dy³⁺ ions were co-doped into the NaLa(MoO₄)₂ host, the energy transfer behaviors resulted from Dy³⁺ to Sm³⁺ ions were investigated by the help of the luminescent spectra of the obtained phosphors. By varying co-doping concentrations of Sm³⁺/Dy³⁺ ions, the emission color of NaLa(MoO₄)₂:Sm³⁺/Dy³⁺ can be tuned from reddish-orange, pink and white to bluish-green. The CIE chromaticity coordinate, the correlated color temperature and the quantum efficiency of NaLa_0.87(MoO₄)₂:1%Sm³⁺, 12%Dy³⁺ were calculated to be (0.356, 0.320), 4353 K and 20%, respectively. Furthermore, in the temperature-dependent analysis, it presented good thermal stability, which can become a promising single-phased white-emitting phosphor for white LEDs devices. Based on these results, the possible energy transfer mechanism between Dy³⁺ and Sm³⁺ in NaLa(MoO₄)₂:Sm³⁺/Dy³⁺ was also proposed.