Circularly polarised patch antenna array using proximity-coupledL-strip line feed

A microstrip antenna array for circular polarisation (CP) using a proximity L-strip line feed is proposed and experimentally investigated. By placing a cross-slot with unequal slot lengths on the circular patch, circular polarisation can be excited. Also, a sequential rotation technique is adopted for the design of this CP antenna array to widen the bandwidth. The impedance and axial ratio bandwidth values are 78 and 16.15%, respectively. The boresight axial ratio is 0.4 dB at 1.91 GHz     

Analysis of cross-aperture coupled patch antenna using transmissionline model

A singly-fed, cross-aperture coupled microstrip antenna producing circular polarisation (CP) has been modelled using the transmission line method (TLM). The model provides an efficient technique to predict the input impedance of the structure with good accuracy when compared to measurement results     

Small slot-coupled circularly-polarised microstrip antenna withmodified cross-slot and bent tuning-stub

A novel design of small slot-coupled circularly-polarised circular microstrip antenna with a modified cross-slot cut in the patch and a bent tuning-stub aligned along the patch boundary is proposed and experimentally studied. Results show that, for fixed circular polarisation (CP) operation, the antenna proposed can have an antenna size reduction of ~80%, as compared to a regular-size CP design. The significant size reduction of the proposed antenna is due to the novel modified cross-slot cut in the patch, and CP operation is obtained using a bent tuning-stub incorporating a properly oriented coupling-slot in the ground plane of the microstrip feed line     

Low-profile design of dual-frequency and dual-polarised triangular microstrip antennas

A single-feed triangular microstrip patch antenna that can be operated at two distinct resonant modes is proposed. The two resonant modes can radiate an omnidirectional dipole-like pattern with linear polarisation and a broadside pattern with circular polarisation, respectively. To achieve the required frequency ratio of the two operating frequency bands, several designs of the proposed antennas with different substrate thickness and patch sizes are studied. In addition, these designs can easily obtain a 50 /spl Omega/ input impedance without any additional matching circuit. Details of the antenna design and obtained performance are presented.     

Dual-polarised single-layer slotted patch antenna

A compact design of the single-layer slotted microstrip patch antenna is presented, which has two highly decoupled orthogonal input ports and is capable of generating dual-polarised radiation. The proposed antenna displays a desired characteristic for reducing polarisation loss between the transmitting and receiving antenna units at arbitrary angles. The measured results show that the proposed antenna with resonance frequency at 5.93 GHz has a bandwidth of about 300 MHz, an average gain of greater than 8 dBi, and an input isolation of exceeding 20 dB for the entire impedance bandwidths of the two polarisations.     

Circular polarisation diversity with small size microstrip antenna

The circular polarisation diversity with the square patch microstrip antenna was obtained by the implantation of the quadrature hybrid as a microstrip feed line. The small size antenna is achieved by using the aperture coupled structure. The cavity model has been used to design an aperture coupled microstrip antenna (ACMSA) and determine the length of the open microstrip stub line in order to match microstrip antenna. The MATLAB and Advanced Design Software (ADS) have been used for designing and simulating the ACMSA. There is a good agreement between the simulated and the experimental results.     

Single-feed dual-band circularly polarised microstrip antenna

A novel technique for obtaining dual-band circular polarisation (CP) radiation of a single-feed circular microstrip antenna is proposed and demonstrated. By embedding two pairs of arc-shaped slots of proper lengths close to the boundary of a circular patch, and protruding one of the arc-shaped slots with a narrow slot, the circular microstrip antenna can perform dual-band CP radiation using a single probe feed. Details of the antenna design and experimental results are presented     

Stacked quasi-elliptical patch array with circular polarisation

A simple stacked subarray antenna with circular polarisation is presented. The antenna is based on a quasi-elliptical patch antenna fed with a 45deg offset microstrip line and a circular patch stacked on top of it via an air substrate. The single-element circularly polarised antenna is sequentially rotated into a four-element synchronous subarray resulting in improvement in antenna performance in terms of impedance bandwidth, gain and axial ratio. The antenna is experimentally verified and the results are reported     

Circularly polarised microstrip antenna with a tuning stub

A simple circular polarisation (CP) design of microstrip antennas using a tuning stub is proposed and studied. It is also demonstrated that, by applying this CP design method to a circular microstrip patch with a cross slot having equal slot lengths, a compact circularly-polarised microstrip antenna can easily be implemented, with much more relaxed manufacturing tolerances as compared to the case of using a cross slot of unequal slot lengths. Details of the antenna designs are described, and experimental results are presented and discussed     

Reconfigurable microstrip antenna with polarisation diversity

A single probe-fed reconfigurable microstrip patch antenna with symmetric cross slots is proposed. By controlling four pin diodes on the patch slots, the proposed antenna has right hand circular polarisation, left hand circular polarisation or linear polarisation.     

Dual polarised microstrip patch antenna with high port isolation

A probe fed stacked microstrip patch antenna for operation in dual polarisation mode is proposed. A slot loaded lower patch is presented to improve isolation between the two polarisation ports. Simulations and measurements show two linear polarisations with an isolation of more than 30 dB within the band 2.5-2.7 GHz. A return loss of -10 dB is achieved within the above-mentioned bandwidth for the proposed antenna. The radiation pattern for the antenna is similar to that of a conventional microstrip antenna and the measured cross-polar level is 16.5 dB below the peak co-polar level within the band 2.5-2.7 GHz     

Reconfigurable microstrip antenna with polarisation diversity and frequency agility

A circularly-polarised (CP) microstrip antenna with polarisation and frequency diversities is presented. The antenna has a square radiating patch and is excited through the coupling of a cross-slot with unequal lengths. Two diodes are used to reconfigure the radiating patch, and by controlling the states of the diodes, the polarisation sense of the antenna can be switched between left-hand and right-hand circular polarisation. Moreover, the two CP modes are operated at different frequencies. An antenna prototype is implemented and the obtained results are shown.     

New Proximity Coupled Feeding Method for Reconfigurable Circularly Polarized Microstrip Ring Antennas

A new simple single-feed method for circularly polarized ring antennas has been investigated. Experimental and theoretical investigation show that either right-handed (RH) or left-handed (LP) circular polarization (CP) can be easily achieved by selecting one of the two input ports of the antennas. The proposed U-shaped microstrip feed line excites the fundamental ${rm TM}_{11}$ mode of the ring radiating elements through proximity coupling along the semi-annular section of the line. The induced rotating surface currents on the ring radiators contribute to the circular polarization behavior of the antennas. Two types of rings have been investigated. Square ring prototypes operate at 2.7 GHz have been designed, fabricated and evaluated to show the basic operating principles of the antennas, while annular ring radiating elements operate at 2.255 GHz are realized to demonstrate the reconfigurable capability of the new feeding structure. In the reconfigurable design, a high isolation RF switch is used to direct the input signal between the two input ports. With suitable biasing arrangement of the RF switch, the antenna is capable to radiate at either types of circular polarization. The reconfigurable design is fed by a single microstrip line. Return losses, axial ratios, gains and radiation patterns of the prototype antennas have been measured for verifications. A parametric study of the new feeding structures with a square ring has been carried out for important design guidelines.      

Two port frequency reconfigurable antenna for cognitive radios

A two port frequency reconfigurable antenna for cognitive radios is presented. It is composed of a disc monopole with two ports that excite at opposite sides; one port is very wideband and consists of a coplanar feed line and the other port is tunable narrowband and consists of a microstrip feed line with defect slots in its ground plane. The slots act as a filter that suppresses frequencies outside the desired band, its operating frequency band can be tuned by varying the length of the slots. The two ports are decoupled by at least 10 dB through the considered frequency range. It is believed that the proposed antenna can be a good candidate for cognitive radios in generic small base stations where the narrowband port is used for operation and the wideband one is used for sensing the spectrum. For accuracy, it is important that the sensing (measurement of the interference noise) is made with the same polarisation as the operation and the proposed antenna achieves this by having the two collinear ports. To examine the presented approach, simulated and measured results are presented and good agreement is reported.     

具有谐波抑制功能的多极化微带天线阵设计

本文提出了一种基于切换馈电网络的极化可重构微带天线阵。阵列单元采用正方形辐射贴片,利用微带线缝隙耦合进行馈电,通过在馈电结构中心加载短路柱,可获得宽带性能的同时,有效抑制偶次谐波。综合采用串联组阵和并联组阵技术,优化设计了一款2×2的天线阵列,将阵列端口分别与微带分支线耦合器及微带混合环相连,最终实现了水平和垂直线极化,左旋和右旋圆极化四种模式的切换。实验结果表明,所提出的天线在ISM频段2.4~2.5 GHz频率范围内获得了良好的匹配和多极化特性。该天线阵设计简单、易于操作,可潜在应用于无线通信系统中天线极化分集的场合。     

Compact circular polarisation design for equilateral-triangularmicrostrip antenna with spur lines

A novel compact circular polarisation (CP) design for a single feed equilateral-triangular microstrip antenna with inserted spur lines at the patch edges is presented. It is found that, with increasing spur-line length, the resonant frequency of the triangular microstrip patch is significantly lowered. Also, by further adjusting the inserted spur lines to have a length ratio of ~0.96, the proposed design can achieve CP radiation at a much lowered operating frequency, resulting in compact triangular microstrip antennas with circular polarisation     

Polarisation switchable microstrip array antenna using proximity feeding technique

A polarisation switchable microstrip array antenna is presented. This array consists of square patch antennas coupled in close proximity to a microstrip line. The polarisation state can be switched electrically by short- or open-circuiting the end of the feedline using a PIN diode. Fundamental characteristics of the proposed array are investigated by measurements performed at S-band to demonstrate the proposal.     

Circular polarised microstrip patch antennas for broadband and dual-band operation

A novel design of microstrip patch antennas for circular polarisation (CP) is proposed. As an example, two CP patch antennas are investigated: a broadband CP patch antenna and a dual-band CP patch antenna. The proposed structure can be achieved by embedding circular holes in the microstrip circular resonator. By changing the size and position of loaded holes, two orthogonal modes are simultaneously excited with equal amplitude and /spl plusmn/90/spl deg/ out of phase. Without any 90/spl deg/ phase-shifter, the proposed CP patch antennas are excited by single feed.     

Slot-coupled microstrip antenna for broadband circular polarisation

A microstrip antenna with broadband circular polarisation (CP) is presented. The proposed microstrip antenna has a circular patch and is excited by a series microstrip-line-feed configuration through the coupling of a ring slot in the ground plane. The broadband operation is achieved by coupling two CP resonant elements, which are due to the circular patch and the ring slot, respectively. A typical prototype using foam material of thickness 5 mm as the antenna substrate is constructed. Measured results show the 3 dB-axial-ratio bandwidth centred at 2500 MHz is more than 10%.     

Microstrip-fed crossed-slot array antenna

A microstrip-fed crossed-slot array antenna having a circular polarisation is developed. First, a single crossed-slot antenna, that can radiate a circularly polarised wave in the broadside direction, is designed and its coupling level to the microstrip line is analysed. Based on this result, an eight-element crossed-slot array is designed and its characteristics are experimentally investigated at 12 GHz band. The return loss of -17 dB is obtained at the design frequency of 11.85 GHz, and the axial ratio of less than 3 dB is achieved over the fractional bandwidth of 5%.