Hybrid PdAg alloy-Au nanorods: Controlled growth, optical properties and electrochemical catalysis

Controllable growth of high-quality hybrid nanostructures is highly desirable for the fabrication of hierarchical, complex and multifunctional devices. Here, PdAg alloys have been controllably grown at different locations on gold nanorods, producing dumbbell-like nanostructures with PdAg at the ends of the gold nanorods or branched nanostructures with PdAg grown almost perpendicular to the gold nanorods. The nucleation sites of PdAg alloys on the gold nanorods can be effectively tuned by varying the concentrations of H2PdC14, AgNO3 and cetyltrimethylammonium bromide （CTAB）. The dumbbell-like and branched nanostructures were characterized by transmission electron microscopy （TEM）, high-resolution TEM （HRTEM）, line-scanning energy-dispersive X-ray spectros-copy （EDS）, X-ray photoelectron spectroscopy （XPS） and UV-Vis absorption spectroscopy. Their electrocatalytic performance was evaluated using ethanol oxidation as a probe reaction. The dumbbelMike nanostructures show a better anti-poisoning performance, but a worse electrochemical activity than the branched ones. The results provide guidelines for the controlled growth of complicated nanostructures for either fundamental studies or potential applications.     

Growth of cubic and hexagonal InN nanorods

InN nanorods with polyhedral ends were grown by evaporating indium in the flow of ammonia gas on Si substrates coated with Au catalyst. The samples were characterized by scanning electron microscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). XRD shows that the samples contain both cubic and hexagonal phases. From the TEM results, it can be found that the cubic nanorods grow along [010] direction with a lattice constant of 0.497 nm, while the hexagonal nanorods grow along [112¯0] direction. The growth mechanism of the obtained nanostructures is discussed.     

Dendritic and epitaxial growths of ZnO particle-rod and rod-rod nanostructures with quasi-one-dimensional and two-dimensional configurations

Quasi-one-dimensional and two-dimensional ZnO nanostructures have been fabricated through thermal evaporation approach. The microstructures of the ZnO nanostructures have been studied using scanning electron microscopy and high-resolution electron microscopy. Quasi-one-dimensional ZnO nanostructures are formed by dendritic growths of ZnO nanoparticles from the stem nanorods surfaces, forming particle-rod nanostructures. While epitaxial growths of branch nanorods from the stem nanorods configure two-dimensional ZnO nanostructures. The epitaxial growth orientation relationship can be described as [2? 110]_R1 || [2? 110]_R2 and (0001) _R1 || (011?0)_R2. The growth mechanism of the quasi-one-dimensional and two-dimensional ZnO nanostructures has been discussed.     

Exploiting nanostructure-thin film interfaces in advanced sensor device configurations

In this report, we present a study on the exploitation of nanostructure-thin film interfaces. Here, the objective is to utilize such interfaces for developing nanostructures for advanced sensing devices, while using state-of-the-art microelectronic technology that enables batch production. In this context, growth of ZnO nanostructures on the GaN/AlGaN heterostructure layers was studied. A fabrication process, based on a hydrothermal growth method, was used for preparing the interfaces of nanostructured thin film. Samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) and obtained results suggested near epitaxial quality of the hetero-interface. Field-effect transistors (FETs) based on ZnO nanorods/GaN heterostructures were fabricated and tested in a controlled gas environment. Thus, it was demonstrated that nanostructures could be exploited in unconventional ways by employing them in scalable and batch-producible conventional semiconductor devices.     

Rapid growth of nanotubes and nanorods of würtzite ZnO through microwave-irradiation of a metalorganic complex of zinc and a surfactant in solution

Large quantities of single-crystalline ZnO nanorods and nanotubes have been prepared by the microwave irradiation of a metalorganic complex of zinc, in the presence of a surfactant. The method is simple, fast, and inexpensive (as it uses a domestic microwave oven), and yields pure nanostructures of the hexagonal würtzite phase of ZnO in min, and requires no conventional templating. The ZnO nanotubes formed have a hollow core with inner diameter varying from 140–160 nm and a wall of thickness, 40–50 nm. The length of nanorods and nanotubes varies in the narrow range of 500–600 nm. These nanostructures have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAED). The ZnO nanorods and nanotubes are found by SAED to be single-crystalline. The growth process of ZnO nanorods and nanotubes has been investigated by varying the surfactant concentration and microwave irradiation time. Based on the various results obtained, a tentative and plausible mechanism for the formation of ZnO nanostructures is proposed.     

Structural and magnetic properties of Zn1-xcoxO nanorods prepared by microwave irradiation technique

We have successfully synthesized large-scale aggregative flowerlike Zn1-xCo(x)O (0.0 < or = x < or = 0.07) nanostructures, consisting of many branches of nanorods at different orientations with diameter within 100-150 nm (tip diameter approximately 50 nm) and length of approximately 1 microm. The rods were prepared using Zinc nitrate, cobalt nitrate and KOH in 180 Watt microwave radiation for short time interval. The synthesized nanorods were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), field emission transmission electron microscopy (FETEM) and DC magnetization measurements. XRD and TEM results indicate that the novel flowerlike nanostructures are hexagonal with wurtzite structure and Co ions were successfully incorporated into the lattice position of Zn ions in ZnO matrix. The selected area electron diffraction (SAED) pattern reveals that the nanorods are single crystal in nature and preferentially grow along [0 0 1] direction. Magnetic studies show that Zn1-xCo(x)O nanorods exhibit room temperature ferromagnetism. This novel nanostructure could be a promising candidate for a variety of future spintronic applications.     

Rutile structured SnO2 nanowires synthesized with metal catalyst by thermal evaporation method

One-dimensional (1-D) nanostructures such as tubes, rods, wires, and belts have attracted considerable research activities owing to their strong application potential as components for nanosize electronic or optoelectronic devices utilizing superior optical and electrical properties. Characterizing the mechanical properties of nanostructure is of great importance for their applications in electronics, optoelectronics, sensors, actuators. Wide-bandgap SnO2 semiconducting material (Eg = 3.6 eV at room temperature) is one of the attractive candidates for optoelectronic devices operating at room temperature, gas sensors, and transparent conducting electrodes. The synthesis and gas sensing properties of semiconducting SnO2 nanomaterials have became one of important research issues since the first synthesis of SnO2 nanobelts. Considering the important application of SnO2 in sensors, these structures are not only ideal systems for fundamental understanding at the nanoscale level, but they also have potential applications as nanoscale sensors, resonator, and transducers. The structured SnO2 nanorods have been grown on silicon substrates with Au catalytic layer by thermal evporation process over 800 degrees C. The resulting sample is characterized and analyzed by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and energy-dispersive X-ray spectroscopy (EDS). The morphology and structural properties of SnO2 nanowires were measured by scanning electron microscopy and high-resolution transmission electron microscopy. The mean diameter of the SnO2 nanorods grown on Au coated silicon (100) substrate is approximately 80 nm. In addition, X-ray diffraction measurements show that SnO2 nanorods have a rutile structure. The formation of SnO2 nanowires has been attributed to the vapor-liquid-solid (VLS) growth mechanisms depending on the processing conditions. We investigated the growth behavior of the SnO2 nanowires by variation of the growth conditions such as gas partial pressure and temperature.     

The synthesis and selective gas sensing characteristics of SnO(2)/α-Fe(2)O(3) hierarchical nanostructures

SnO(2)/α-Fe(2)O(3) hierarchical nanostructures, in which the SnO(2) nanorods grow on the side surface of α-Fe(2)O(3) nanorods as multiple rows, were synthesized via a three-step process. The diameters and lengths of the SnO(2) nanorods are 6-15?nm and about 120?nm. The growth direction of SnO(2) nanorods is [001], significantly affected by that of α-Fe(2)O(3) nanorods. The hetero-nanostructures exhibit very good selectivity to ethanol. The sensing characteristics are related to the special heterojunction structures, confirmed by high-resolution transmission electron microscopy observation. Therefore, a heterojunction barrier controlled gas sensing mechanism is realized. Our results demonstrate that the hetero-nanostructures are promising materials for fabricating sensors and other complex devices.     

铬酸铅一维纳米材料的水热制备、表征及性能研究

利用水热法在不使用任何表面活性剂的情况下成功制备出了包括纳米棒、纳米线在内的铬酸铅一维纳米材料,通过改变反应温度可以很容易对铬酸铅一维纳米材料的长度和长径比进行调节。运用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和高分辨透射电镜(HRTEM)等对所得产物进行了系统的表征,同时对所制备的铬酸铅一维纳米材料的光学性质进行了研究分析。     

Flame synthesis of zinc oxide nanocrystals

Distinctive zinc oxide (ZnO) nanocrystals were synthesized on the surface of Zn probes using a counter-flow flame medium formed by methane/acetylene and oxygen-enriched air streams. The source material, a zinc wire with a purity of ～99.99% and diameter of 1 mm, was introduced through a sleeve into the oxygen rich region of the flame. The position of the probe/sleeve was varied within the flame medium resulting in growth variation of ZnO nanocrystals on the surface of the probe. The shape and structural parameters of the grown crystals strongly depend on the flame position. Structural variations of the synthesized crystals include single-crystalline ZnO nanorods and microprisms (ZMPs) (the ZMPs have less than a few micrometers in length and several hundred nanometers in cross section) with a large number of facets and complex axial symmetry with a nanorod protruding from their tips. The protruding rods are less than 100 nm in diameter and lengths are less than 1 μm. The protruding nanorods can be elongated several times by increasing the residence time of the probe/sleeve inside the oxygen-rich flame or by varying the flame position. At different flame heights, nanorods having higher length-to-diameter aspect-ratio can be synthesized. A lattice spacing of ～0.26 nm was measured for the synthesized nanorods, which can be closely correlated with the (0 0 2) interplanar spacing of hexagonal ZnO (Wurtzite) cells. The synthesized nanostructures were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution TEM (HR-TEM), X-ray energy dispersive spectroscopy (EDS), and selected area electron diffraction pattern (SAED). The growth mechanism of the ZnO nanostructures is discussed.     

Synthesis of zinc oxide nanotetrapods and nanorods by thermal evaporation without catalysis

ZnO nanotetrapods and nanorods have been synthesized by a simple thermal evaporation of Zn powder (300 mesh, 99.99% purity) under simultaneous flow of oxygen and argon gases in two-zone furnace in two different temperature regions. These ZnO nanostructures have hexagonal structure, which grow along the [001] direction in the form of nanotetrapods (diameter approximately 60-150 nm, length approximately 1-4 microm) and nanorods (diameter approximately 30-60 nm, length approximately 2-5 microm). The morphologies of these ZnO nanostructures have been investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It has been found that growth parameters like temperature, gas flow rate etc., control the diameter of the nanotetrapods and nanorods. These novel structures of ZnO nanorods and nanotetrapods may be attractive for optical and other nanodevices.     

Cluster synthesis of branched CdTe nanocrystals for use in light-emitting diodes

Highly luminescent cadmium telluride (CdTe) nanocrystals were synthesized using Li(2)[Cd(4)(SPh)(10)] as a reactive Cd cluster compound at relatively low temperature, making it a safe precursor for the large scale synthesis of CdTe nanocrystals. Transmission electron microscopy (TEM) showed that the shape of the CdTe nanocrystals changes from nanorods to branched structures with increasing reaction time. The nanocrystals show high luminescent quantum yields up to 37% for CdTe branched nanostructures, and as high as 52% for CdTe/CdS core-shell heterostructures. CdTe/CdS nanocrystals were used to make light-emitting diodes in combination with organic layers for electron and hole injection. The devices show a maximum luminance efficiency of 0.35?cd?A(-1).     

Nanowires and nanowire–nanosheet junctions of SnO2 nanostructures

Intriguing one-dimensional (1D) nanostructures of SnO₂, including nanowires, dendritic nanorods and falchion-like nanosheets, have been prepared by chemical vapor deposition (CVD) method. To meet the needs of large-scale, controllable, and designable synthesis of nanostructures, it is crucial to systematically study the experimental conditions under which the desired nanostructures can be synthesized reproducibly, in large quantity and with controllable morphology. The most important factors that influence the morphology of the product are temperature and template. The effects of temperature and anodic aluminum oxide (AAO) template with or without Au catalyst particles on the morphology of the final product were studied in this paper. The structures were characterized using X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and high-resolution field emission scanning electron microscopy (FESEM).     

ZnO纳米棒Al掺杂和A1,N共掺杂的制备技术与光致发光性能

采用水热法首先合成了Al掺杂ZnO(AZO)纳米棒,在此基础上通过550℃的氨气氛中退火制备了Al,N共掺杂ZnO(ANZ())纳米棒.运用X射线衍射(XRD),场发射扫描电镜(FESEM),透射电子显微镜(TEM),X射线能谱(EDS)和光致发光(PL)对样品进行了表征与分析.结果表明,制备的AZO和ANZ()纳米棒...     

Synthesis and photo-catalytic degradation property of nanostructured-ZnO with different morphology

ZnO nanostructures with different morphology have been successfully fabricated by a simple relative low temperature approach at 90 °C for 5 h without surfactant assistance. These structures can be easily tailed using varied concentrations of sodium hydroxide (NaOH) and different amounts of the hydrazine hydrate (N₂H₄·H₂O). X-ray diffraction (XRD) result proves the formation of ZnO with wurtzite structure. Microstructure as revealed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicates that the rod-like and chrysanthemum-like ZnO nanostructures contain many radial nanorods, which grow along the [0001] direction. Furthermore, the as-prepared ZnO nanomaterials exhibit high activity on the photo-catalytic degradation of typical persistent organic pollutants (POPs), indicating that they are promising as semiconductor photo-catalysts.     

分级氧化铟纳米结构的同质外延生长及发光性能

用无催化碳热还原法合成了大量三维分级的In2O3亚微/纳米结构,用XRD、SEM、TEM和EDS等手段对In2O3纳米棒的形貌、成分和结构进行了表征.结果表明:In2O3纳米棒为具有体心立方结构单晶,沿着<100>和<111>方向外延生长,属于自组装和气固外延生长机制.同质外延生长的分级结构是"二次成核"和气固生长协同...     

Synthesis, characterization, and hydrophobic properties of Bi2S3 hierarchical nanostructures

Novel Bi₂S₃ hierarchical nanostructures self-assembled by nanorods are successfully synthesized in mild benzyl alcohol system under hydrothermal conditions. The hierarchical nanostructures exhibit a flower-like shape. X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED) were used to characterize the as-synthesized samples. Meanwhile, the effect of various experimental parameters including the concentration of reagents and reaction time on final product has been investigated. In our experiment, PVP plays an important role for the formation of the hierarchical nanostructures and the possible mechanism was proposed. In addition, Bi₂S₃ film prepared from the flower-like hierarchical nanostructures exhibits good hydrophobic properties, which may bring nontrivial functionalities and may have some promising applications in the future.     

Morphological transformations induced by Co impurity in ZnO nanostructures prepared by rf-sputtering and their physical properties

Growth of uniform and vertically well aligned nanorods is a difficult process and becomes more complicated in case of ZnO nanorods on silicon (Si) substrate due to thermal instability of the Si substrate and large lattice mismatch (~?40%) between the substrate and the ZnO nanorods array. Growth of ZnO nanorods assisted by metal ion via rf-sputtering is a good technique; however, it needs many parameters to be controlled for desired growth and morphology of nanostructures. In this work, we report the morphological transformations of ZnO nanostructured thin film by simply controlling the concentration of Cobalt (Co) impurity in sputtering target. With the introduction of Co ions in ZnO matrix, the initial coalescence grain structure (pyramidal morphology) changes into columnar grains and as the concentration of Co ions increases further, a highly oriented ZnO nanorods array is obtained. The possible mechanism with the help of schematic diagram is also proposed for the morphological transformation of ZnO nanostructures. The vertically aligned nanorods show good optical properties as well as robust ferromagnetism at room temperatures. It has also been observed that with the dopant conc. increasing there was a significant decrease in the band gap energy. The structure and morphology of rf-sputtered nanostructured thin films were investigated by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy and selected area electron diffraction. Interestingly, with Co conc. increasing in ZnO matrix results in decreasing LO modes in Raman spectroscopy. It can have strong influence on the magnetic properties of the material. The good optical and strong ferromagnetic properties of the ZnO nanorods, suggest its possible applications in the fields of lasers, spintronics and medical applications.     

Growth of tungsten oxide nanorods with carbon caps

Hybrid nanostructures consisting of tungsten oxide nanorods with mushroom-shaped carbon caps were grown on electrochemically etched tungsten tips by thermal chemical vapor deposition with methane and argon. These nanorods grow along the radial direction and are very straight and smooth. Electron microscopy revealed a dominant diameter and length of approximately 50 nm and approximately 0.6 microm, respectively. High-resolution transmission electron microscopy (HRTEM), and electron energy loss spectroscopy (EELS) revealed the presence of crystalline monoclinic W18O49 in the nanorods, and the cap was entirely amorphous carbon. A plausible growth mechanism involves the reduction of tungsten oxide WO3, present on the tungsten surface, by methane at 900 degrees C.     

Preparation and characterization of ZnO/ZnS core/shell nanocomposites through a simple chemical method

In this paper, we reported the preparation of ZnO/ZnS core/shell nanocomposites by sulfidation of ZnO nanostructures via a simple hydrothermal method. The precursors of bare ZnO nanoparticles and ZnO nanorods were synthesized by a surfactant-assisted hydrothermal growth. The structural, morphological, and element compositional analysis of bare ZnO nanostructures and ZnO/ZnS core/shell nanocomposites were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy techniques. The XRD results indicated that the phase of bare ZnO nanoparticles and ZnO nanorods was wurtzite structure, and the phase of coated ZnS nanoparticles on the surface of bare ZnO nanostructures was sphalerite structure with the size of about 8 nm. Photoluminescence measurement was carried out, and the PL spectra of ZnO/ZnS core/shell nanocomposites revealed an enhanced UV emission and a passivated orange emission compared to that of bare ZnO nanostructures. In addition, the growth mechanism of ZnO/ZnS core/shell nanostructures through hydrothermal method was preliminarily discussed.