共查询到20条相似文献,搜索用时 187 毫秒
1.
高校毕业生就业质量监测是利用信息化手段对高校毕业生就业机会、就业时间、薪酬水平、就业单位性质、专业相关性、社保待遇、就业地区流向、学生个人就业满意度等体现就业质量的主要数据指标进行采集、加工,并客观呈现就业质量状态。从浙江连续十年的高校毕业生就业质量监测数据分析可以看出:毕业生就业速度逐渐下降且就业率在近两年明显下降;工资待遇水平虽逐年增长,但社保待遇一直偏低;专业相关性有所提升,但职业稳定性一直偏低;绝大多数毕业生面向发达城市的非国有单位就业;毕业生就业的自我满意度较高。从就业质量监测数据可以预测到如下趋势:高校毕业生就业形势将日趋复杂;毕业生就业去向的比例会持续变化;面向中小企业就业的毕业生比例可能会进一步提高,而面向县、乡镇就业的高校毕业生比例难以提高;高校毕业生积极和稳固就业意识很难增强。有效提升大学毕业生就业质量需重点从如下方面着手:努力完善就业政策体系;适度扩大定向就业规模;建立精准就业服务和监测机制;依据市场需要调整专业规模;有效引导高校学生的就业理念。 相似文献
2.
大学生就业选择时的"逐利"行为是影响毕业生有序就业的难题,通过实证调研对大学生就业结构进行分析发现,毕业生就业单位与和行业分布"一支独大",以民营企业和制造业为主;毕业生就业地域集中于"中心城市",主要选择省域内主要城市。对大学生就业质量的进一步分析发现,毕业生整体就业情况较为理想,"单位就业"为毕业生主要去向;初次就业较为满意,毕业生能够较快融入工作集体;毕业生就业区域分布与人才培养定位相符,体现服务省域经济发展价值取向;毕业生深造专业具有延续性且更趋理性,创业主要由兴趣理想驱动;学校多元化人才培养模式获得社会认可,不同专业的满意度评价存在差异。为了保障毕业生顺利就业、高质量就业,需要采取以下措施,一是建立招生就业联动机制,针对区域社会需求培养人才;二是突出实践应用,加强技能性课程教育教学;三是加强大学生职业规划训练,瞄准市场改善高校就业服务。 相似文献
3.
4.
5.
遵照国家最新职业教育理念和模具企业实际情况,对模具企业岗位群及职业能力进行分析,结合现行专业人才培养现状、专业建设实际情况、毕业生就业去向、企业对专业教学的要求与建议,确定各岗位应具备的知识、技能和素养。为模具专业岗位群和职业能力分析提供全面、客观的依据,为开展专业建设工作打好基础。 相似文献
6.
7.
赵晓瑛 《特种铸造及有色合金》2023,(3):446-447
<正>特种铸造行业在我国汽车制造、家用电器和飞行器制造中发挥了重要作用,我国持续推进工业化发展,加快航空航天领域关键技术研发的背景下,教育部门依然需要加强对特种铸造专业人才的培养。然而学校的专业知识技能教育与实际特种铸造行业的就业依然存在一定差距,该专业学生毕业后的对口就业率依然不容乐观,所以研究如何从各方面提升特种铸造专业学生的就业能力十分有意义。一、特种铸造专业学生就业现状通过对行业内企业管理者和职员的走访、对毕业生的持续跟踪调查,和专业数据分析公司对行业协会有关数据的分析,可以得到如下铸造专业学生就业现状:(1)学生就业观念存在一定误区。学生在没有接触各个企业真实的招聘情况,对自身的技能和当地的薪资水平没有足够的了解,而且被社交平台中各种高薪工作的介绍迷惑,形成与实际情况不相符的就业想法, 相似文献
8.
本文从稳定就业市场、潜在就业市场和后备就业市场三方面总结了中南大学近几年毕业生就业市场的现状,从区域结构、行业部门、专业特色分析了中南大学毕业生就业市场的特点。培育和拓展中南大学毕业生就业市场,必须抓住“生产”、“销售”、“流通”、“建设”四个环节,发挥“行业”、“区域”、“科研”、“人员”四大优势,开创毕业生就业市场建设的新局面。 相似文献
9.
10.
《现代大学教育》2016,(4)
近年来,有相当一部分本科毕业生在就业后很短的时间内就离职,甚至频繁跳槽,因此不能简单地追求大学毕业生的就业率而忽视其就业稳定性。影响大学生短期之内离职的因素有很多,然而很少有研究关注不同专业毕业生所就业的行业分布、职业分布及其带来的影响。通过调查和数据分析,我们认为不同专业的大学毕业生在短期内的离职率,与该专业毕业生就业的职业分布、对口职业的专业化程度及行业分布情况有关,依照大学毕业生就业职业分布和行业分布的优势程度,可将专业分为职业聚焦集中型、职业聚焦普适型、职业分散普适型和职业分散集中型。这一结论对于高校专业改革、课程改革和毕业生个人就业引导,有重要的指导意义。 相似文献
11.
12.
本文在论述了故障诊断概念、特点及诊断手段之后,通过对某厂1986年发生的较大事故分析,及在历年事故、故障损失统计计算的基础上,结合国外经验,提出了设备诊断费用的合理值及建议。 相似文献
13.
14.
Metallurgical examination of bronze artifacts from the Great Hwangnam Tomb in Kyongju, Korea, shows that they were either
cast or forged from unleaded alloys containing relatively low or negligible Sn. This clearly deviates from the early Korean
bronze tradition based on casting and leaded high Sn alloys, and is also distinguished from the later tradition characterized
by the use of high Sn alloys and various thermo-mechanical treatments after casting. This divergence was a transient episode
leading to the nucleation of a new bronze tradition in Korea. It is suggested that the spread of iron use and the resulting
demand for new bronze items served as major factors driving the search for new metallurgical techniques. 相似文献
15.
The thermal formation of dioxins is typical of recent environmental issues relating to metallurgy. To analyze the behavior
of these toxic species, computer assisted thermodynamic assessments were extensively carried out. In the homogeneous gas phase
equilibria of the C−O−H−Cl system, the formation of dioxins is usually observed below 300–350°C, but is observed at higher
temperature under the condition of oxygen deficiency. It has become clear that the presence of enough oxygen and hydrogen,
as well as a decrease in chlorine content, would be desirable to prevent dioxin formation. From a strict thermodynamic standpoint,
dioxins are meta-stable products observed under the retardation of the carbon deposition reaction which must be very slow
at low temperature. The effects of some inhibitors or accelerators on the formation of dioxins are also discussed.
This article based on a presentation made in the symposium “2000 Spring Meeting of the Korean Institute of Metals and Materials”,
held at Sunchon National University, Sunchon, Korea, April 21–22 under the auspices of The Korean Institute of Metals and
Materials. 相似文献
16.
高等教育投资项目社会评价指标体系的分析与构建 总被引:4,自引:0,他引:4
我国高等教育的高速发展对高等教育投资主体和资金来源多元化提出了新的要求。如何对高等教育投资项目的经济和社会效益进行合理评价 ,这既是各投资主体关注的重点 ,也是高等院校如何加快高等教育建设步伐的核心问题。由于高等教育所具有的特殊性 ,目前 ,我国对高等教育投资项目的效益问题研究甚少 ,而高等教育投资项目的社会评价问题更是刚刚起步。本文在深入研究教育经济学及建设项目评价相关知识的基础上 ,总结了高等教育投资项目社会评价的基本特点 ,进而构建了高等教育投资项目社会评价指标体系。这对建立和完善高等教育投资项目评价理论 ,正确进行高等教育投资决策奠定了坚实的基础。 相似文献
17.
Dong Nyung Lee 《Metals and Materials International》1999,5(5):401-417
In 1995, the author advanced a model for the evolution of recrystallization texture. In the model the absolute maximum internal
stress direction due to dislocations generated during deformation or fabrication in the fabricated material is aligned with
the minimum Young’s modulus direction in recrystallized grains, whereby the energy release during recrystallization can be
maximized. This comes from the fact that material concerned does not change macroscopically its shape and volume during recrystallization,
and so the recrystallization is a displacement controlled process. This strain energy release maximization model originates
from the presumption that the stored energy due to dislocations is the major driving force for the recrystallization. The
absolute maximum internal stress direction may be obtained from the operating slip systems, which are related to the deformation
mode and texture. If one slip system is activated, the absolute maximum normal stress direction is parallel to the slip direction,
or the Burgers vector direction. If more than one slip system is activated, the absolute maximum normal stress direction can
be determined by the vector sum of related slip directions, taking their contribution to slip into account. This paper discusses
recrystallization textures of plastically deformed and electrodeposited metals, based on the model. A brief comment was made
also on the growth textures of axisymmetrically deformed copper and silver and electrodeposited silver and Fe-Ni alloy.
This article is based on a presentation made in the symposium “ ’99 International Symposium on Textures of Materials”, held
at Sunchun National University, Sunchun, April 21~22, 1999 under the auspices of The Korean Institute of Metals and Materials
and The Research and Development Center for Automobile’s Parts and Materials. 相似文献
18.
可淬硬汽车铸铁凸轮轴凝固温度场的实验研究 总被引:2,自引:0,他引:2
通过对可淬硬铸铁汽车凸轮轴温度场的测试实验和分析后发现,其轴向/轻向温度场沿其方向呈线性关系.同时讨论了影响铸件温度场的主要因素,为优化铸造工艺和更有效地指导生产实际提供了科学依据 相似文献
19.
就中国钢产量迅猛发展的态势 ,分析了国外产钢大国在结构调整中的经验与教训 ,结合中国国民经济发展中一些行业产品过剩与结构调整的经验 ,指出要切实贯彻以品种质量为主的结构调整方针 ,对钢产量的继续增长要谨慎从事 ,并提出 4点意见 相似文献
20.
齿轮式金刚石修整滚轮在齿轮精加工中的应用研究 总被引:1,自引:0,他引:1
齿轮式金刚石修整滚轮是多种齿轮精加工工艺的修整工具,本文探讨了它的制作方法和注意事项,并用自制的金刚石修整滚轮在内啮合珩齿机、蜗杆砂轮磨齿机上对内珩轮、蜗杆砂轮进行了修磨,试验证明,自制的金刚石修整滚轮精度完全符合使用要求。 相似文献