Cross-Layer Optimization of Multichannel Multiantenna WMNs

Use of multiple channels can significantly improve the throughput of wireless mesh networks (WMNs). Additionally, recent advances in radio technology have made it possible to realize software-defined radio (SDR), which is capable of switching from one channel to another dynamically. On the other hand, equipping wireless nodes with multiple antennas creates great potential for throughput improvement via interference suppression, spatial multiplexing, and spatial division multiple access techniques. In this paper, we investigate the joint optimization of routing and scheduling in multichannel WMNs, where nodes are equipped with a single SDR and multiple antenna elements. We analyze achievable throughput of these networks under four different multiantenna modes: single user single stream, single user multi stream, multi user single stream, and multi user multi stream, each mode integrates different combinations of multiantenna techniques. We mathematically model scheduling and interference constraints and formulate joint routing and scheduling optimization problem with the objective of maximizing the throughput by minimizing network schedule time such that traffic demands for a set of sessions are satisfied. A column generation-based decomposition approach is proposed to solve the problem. Simulation results are presented to evaluate the impact of number of antennas, number of channels, and number of sessions on the schedule time for the four proposed modes.     

A survey and comparison of multichannel protocols for performance anomaly mitigation in IEEE 802.11wireless networks

Providing multichannel functionality can improve the performance of wireless networks. Although off‐the‐shelf IEEE 802.11 physical layer and medium access control specifications support multiple channels and multiple data rates, one of the major challenges is how to efficiently utilize available channels and data rates to improve network performance. In multirate networks, low‐rate links severely degrade the capacity of high‐rate links, which is known as performance anomaly. To overcome the performance anomaly problem, different data rate links can get equal air‐time by exploiting time diversity and frequency diversity, or they can be separated over nonoverlapping channels. In this paper, we study existing multichannel protocols proposed to mitigate the performance anomaly problem by classifying them into single‐radio protocols, multiradio single‐hop protocols, and multiradio multihop protocols. To investigate the effectiveness of multichannel solutions for performance anomaly, we compare these protocols with well‐known multichannel protocols that do not consider performance anomaly. In addition, this paper gives insightful research issues to design multichannel protocols that mitigate performance anomaly in IEEE 802.11 wireless networks. Copyright © 2012 John Wiley & Sons, Ltd.     

A QoS Routing Protocol with Bandwidth Allocation in Multichannel Ad Hoc Networks

Mobile multimedia applications have recently generated much interest in mobile ad hoc networks (MANETs) supporting quality-of-service (QoS) communications. Multiple non-interfering channels are available in 802.11 and 802.15 based wireless networks. Capacity of such channels can be combined to achieve higher QoS performance than for single channel networks. The capacity of MANETs can be substantially increased by equipping each network node with multiple interfaces that can operate on multiple non-overlapping channels. However, new scheduling, channel assignment, and routing protocols are required to utilize the increased bandwidth in multichannel MANETs. In this paper, we propose an on-demand routing protocol M-QoS-AODV in multichannel MANETs that incorporates a distributed channel assignment scheme and routing discovery process to support multimedia communication and to satisfy QoS bandwidth requirement. The proposed channel assignment scheme can efficiently express the channel usage and interference information within a certain range, which reduces interference and enhances channel reuse rate. This cross-layer design approach can significantly improve the performance of multichannel MANETs over existing routing algorithms. Simulation results show that the proposed M-QoS-AODV protocol can effectively increase throughput and reduce delay, as compared to AODV and M-AODV-R protocols.     

Joint channel assignment and routing in multiradio multichannel wireless mesh networks with directional antennas

The aggregate capacity of a wireless mesh network (WMN) is severely affected by interflow interference. In this paper, we propose a network architecture that incorporates directional antennas with multiple orthogonal channels to effectively enhance the performance of WMNs. First, a sectored connectivity graph is introduced to model multiradio multichannel WMNs with directional antennas. Next we formulate the topology design, directional interface assignment, channel allocation, and routing mathematically as a mixed integer linear programming problem. This problem is solved using an iterated local search algorithm to obtain optimized network resource allocation. Simulation results indicate that the proposed architecture can achieve higher packet delivery ratio while providing better network fairness. Copyright © 2014 John Wiley & Sons, Ltd.     

无线Mesh网中基于信道感知的多径路由判据

无线Mesh网是一种新型的宽带无线接入网络,其中路由算法的设计是一个非常活跃的研究领域。WCETT路由判据仅适于单径路由协议,但是多路径路由能够提供负载平衡和较高的总带宽。为了提高网络性能,在综合考虑无线链路质量和信道间干扰的基础上,提出了一种新的多径路由判据CAM-WCETT。仿真结果表明,该方案能显著提高网络的吞吐量。     

Channel Assignment Strategies for Multiradio Wireless Mesh Networks: Issues and Solutions

Next-generation wireless mobile communications will be driven by converged networks that integrate disparate technologies and services. The wireless mesh network is envisaged to be one of the key components in the converged networks of the future, providing flexible high- bandwidth wireless backhaul over large geographical areas. While single radio mesh nodes operating on a single channel suffer from capacity constraints, equipping mesh routers with multiple radios using multiple nonoverlap- ping channels can significantly alleviate the capacity problem and increase the aggregate bandwidth available to the network. However, the assignment of channels to the radio interfaces poses significant challenges. The goal of channel assignment algorithms in multiradio mesh networks is to minimize interference while improving the aggregate network capacity and maintaining the connectivity of the network. In this article we examine the unique constraints of channel assignment in wireless mesh networks and identify the key factors governing assignment schemes, with particular reference to interference, traffic patterns, and multipath connectivity. After presenting a taxonomy of existing channel assignment algorithms for WMNs, we describe a new channel assignment scheme called MesTiC, which incorporates the mesh traffic pattern together with connectivity issues in order to minimize interference in multi- radio mesh networks.     

Capacity regions for wireless ad hoc networks

We define and study capacity regions for wireless ad hoc networks with an arbitrary number of nodes and topology. These regions describe the set of achievable rate combinations between all source-destination pairs in the network under various transmission strategies, such as variable-rate transmission, single-hop or multihop routing, power control, and successive interference cancellation (SIC). Multihop cellular networks and networks with energy constraints are studied as special cases. With slight modifications, the developed formulation can handle node mobility and time-varying flat-fading channels. Numerical results indicate that multihop routing, the ability for concurrent transmissions, and SIC significantly increase the capacity of ad hoc and multihop cellular networks. On the other hand, gains from power control are significant only when variable-rate transmission is not used. Also, time-varying flat-fading and node mobility actually improve the capacity. Finally, multihop routing greatly improves the performance of energy-constraint networks.     

Joint Channel Assignment and Routing for Throughput Optimization in Multiradio Wireless Mesh Networks

Multihop infrastructure wireless mesh networks offer increased reliability, coverage, and reduced equipment costs over their single-hop counterpart, wireless local area networks. Equipping wireless routers with multiple radios further improves the capacity by transmitting over multiple radios simultaneously using orthogonal channels. Efficient channel assignment and routing is essential for throughput optimization of mesh clients. Efficient channel assignment schemes can greatly relieve the interference effect of close-by transmissions; effective routing schemes can alleviate potential congestion on any gateways to the Internet, thereby improving per-client throughput. Unlike previous heuristic approaches, we mathematically formulate the joint channel assignment and routing problem, taking into account the interference constraints, the number of channels in the network, and the number of radios available at each mesh router. We then use this formulation to develop a solution for our problem that optimizes the overall network throughput subject to fairness constraints on allocation of scarce wireless capacity among mobile clients. We show that the performance of our algorithms is within a constant factor of that of any optimal algorithm for the joint channel assignment and routing problem. Our evaluation demonstrates that our algorithm can effectively exploit the increased number of channels and radios, and it performs much better than the theoretical worst case bounds     

Multiradio Channel Allocation in Multihop Wireless Networks

Channel allocation was extensively investigated in the framework of cellular networks, but it was rarely studied in the wireless ad hoc networks, especially in the multihop networks. In this paper, we study the competitive multiradio multichannel allocation problem in multihop wireless networks in detail. We first analyze that the static noncooperative game and Nash equilibrium (NE) channel allocation scheme are not suitable for the multihop wireless networks. Thus, we model the channel allocation problem as a hybrid game involving both cooperative game and noncooperative game. Within a communication session, it is cooperative; and among sessions, it is noncooperative. We propose the min-max coalition-proof Nash equilibrium (MMCPNE) channel allocation scheme in the game, which aims to maximize the achieved data rates of communication sessions. We analyze the existence of MMCPNE and prove the necessary conditions for MMCPNE. Furthermore, we propose several algorithms that enable the selfish players to converge to MMCPNE. Simulation results show that MMCPNE outperforms NE and coalition-proof Nash equilibrium (CPNE) schemes in terms of the achieved data rates of multihop sessions and the throughput of whole networks due to cooperation gain.     

Cluster‐based mobility management algorithms for wireless mesh networks

Wireless mesh networks (WMNs) have been the recent advancements and attracting more academicians and industrialists for their seamless connectivity to the internet. Radio resource is one among the prime resources in wireless networks, which is expected to use in an efficient way especially when the mobile nodes are on move. However, providing guaranteed quality of service to the mobile nodes in the network is a challenging issue. To accomplish this, we propose 2 clustering algorithms, namely, static clustering algorithm for WMNs and dynamic clustering algorithm for WMNs. In these algorithms, we propose a new weight‐based cluster head and cluster member selection process for the formation of clusters. The weight of the nodes in WMN is computed considering the parameters include the bandwidth of the node, the degree of node connectivity, and node cooperation factor. Further, we also propose enhanced quality of service enabled routing protocol for WMNs considering the delay, bandwidth, hopcount, and expected transmission count are the routing metrics. The performance of the proposed clustering algorithms and routing protocol are analyzed, and results show high throughput, high packet delivery ratio, and low communication cost compared with the existing baseline mobility management algorithms and routing protocols.     

Cross-Layer Design for QoS in Wireless Mesh Networks

Cross-layer design for quality of service (QoS) in wireless mesh networks (WMNs) has attracted much research interest recently. Such networks are expected to support various types of applications with different and multiple QoS and grade-of-service (GoS) requirements. In order to achieve this, several key technologies spanning all layers, from physical up to network layer, have to be exploited and novel algorithms for harmonic and efficient layer interaction must be designed. Unfortunately most of the existing works on cross-layer design focus on the interaction of up to two layers while the GoS concept in WMNs has been overlooked. In this paper, we propose a unified framework that exploits the physical channel properties and multi-user diversity gain of WMNs and by performing intelligent route selection and connection admission control provides both QoS and GoS to a variety of underlying applications. Extensive simulation results show that our proposed framework can successfully satisfy multiple QoS requirements while it achieves higher network throughput and lower outage as compared to other scheduling, routing and admission control schemes.     

Multichannel mesh networks: challenges and protocols

Supporting high throughput is an important challenge in multihop mesh networks. Popular wireless LAN standards, such as IEEE 802.11, provision for multiple channels. In this article, we consider the use of multiple wireless channels to improve network throughput. Commercially available wireless network interfaces can typically operate over only one channel at a time. Due to cost and complexity constraints, the total number of interfaces at each host is expected to be smaller than the total channels available in the network. Under this scenario, several challenges need to be addressed before all the available channels can be fully utilized. In this article, we highlight the main challenges, and present two link-layer protocols for utilizing multiple channels. We also present a new abstraction layer that simplifies the implementation of new multichannel protocols in existing operating systems. This article demonstrates the feasibility of utilizing multiple channels, even if each host has fewer interfaces than the number of available channels.     

Intelligent wireless mesh path selection algorithm using fuzzy decision making

Wireless mesh networks (WMNs) are expected to be widely deployed due to their ability to provide ubiquity, convenience, cost-efficiency, and simplicity for both service providers and end-users. Recently, the IEEE 802.11s standard introduces the hybrid wireless mesh protocol (HWMP) which is inspired by a combination of on-demand and tree-based pro-active routing algorithms. In this paper, we argue that the proposed unimetric path selection algorithm in the standard is not reliable. We introduce and examine a novel multimetric wireless mesh path selection algorithm using fuzzy decision making under realistic wireless channel conditions. The proposed path selection algorithm is designed to improve the performance of both re-active and pro-active routing protocols of HWMP for not only single-channel but also multi-channel WMNs. The reported results show the superior performance of the proposed path selection algorithm in terms of delay and packet delivery ratio without increasing overhead significantly. Although some fuzzy-based routing algorithms have been defined in literature recently, to the best of our knowledge, this paper is the first one to introduce and examine the use of fuzzy logic in the path selection of single- and multi-channel wireless local area network-based WMNs under realistic wireless channel conditions.     

Load-balancing routing in multichannel hybrid wireless networks with single network interface

A hybrid wireless network is an extension of an infrastructure network, where a mobile host may connect to an access point (AP) using multihop wireless routes, via other mobile hosts. The APs are configured to operate on one of multiple available channels. Mobile hosts and wireless routers can select its operating channel dynamically through channel switching. In this environment, a routing protocol that finds routes to balance load among channels while maintaining connectivity was proposed. The protocol works with nodes equipped with a single network interface, which distinguishes the work with other multichannel routing protocols that require multiple interfaces per node. The protocol discovers multiple routes to multiple APs, possibly operating on different channels. Based on a traffic load information, each node selects the "best" route to an AP and synchronizes its channel with the AP. With this behavior, the channel load is balanced, removing hot spots and improving channel utilization. The protocol assures every node has at least one route to an AP, where all intermediate nodes are operating on the same channel. The simulation results show that the proposed protocol successfully adapts to changing traffic conditions and improves performance over a single-channel protocol and a multichannel protocol with no load balancing.     

A ring-based multicast routing topology with QoS support in wireless mesh networks

Wireless mesh networking (WMN) is an emerging technology for future broadband wireless access. The proliferation of the mobile computing devices that are equipped with cameras and ad hoc communication mode creates the possibility of exchanging real-time data between mobile users in wireless mesh networks. In this paper, we argue for a ring-based multicast routing topology with support from infrastructure nodes for group communications in WMNs. We study the performance of multicast communication over a ring routing topology when 802.11 with RTS/CTS scheme is used at the MAC layer to enable reliable multicast services in WMNs. We propose an algorithm to enhance the IP multicast routing on the ring topology. We show that when mesh routers on a ring topology support group communications by employing our proposed algorithms, a significant performance enhancement is realized. We analytically compute the end-to-end delay on a ring multicast routing topology. Our results show that the end-to-end delay is reduced about 33 %, and the capacity of multicast network (i.e., maximum group size that the ring can serve with QoS guarantees) is increased about 50 % as compared to conventional schemes. We also use our analytical results to develop heuristic algorithms for constructing an efficient ring-based multicast routing topology with QoS guarantees. The proposed algorithms take into account all possible traffic interference when constructing the multicast ring topology. Thus, the constructed ring topology provides QoS guarantees for the multicast traffic and minimizes the cost of group communications in WMNs.     

Distributed Channel Assignment and Routing in Multiradio Multichannel Multihop Wireless Networks

In this paper, we first identify several challenges in designing a joint channel assignment and routing (JCAR) protocol in heterogeneous multiradio multichannel multihop wireless networks (M³WNs) using commercial hardware [e.g., IEEE 802.11 Network Interface Card (NIC)]. We then propose a novel software solution, called Layer 2.5 JCAR, which resides between the MAC layer and routing layer. JCAR jointly coordinates the channel selection on each wireless interface and the route selection among interfaces based on the traffic information measured and exchanged among the two-hop neighbors. Since interference is one of the major factors that constrain the performance in a M³ WN, in this paper, we introduce an important channel cost metric (CCM) which actually reflects the interference cost and is defined as the sum of expected transmission time weighted by the channel utilization over all interfering channels (for each node). In CCM, both the interference and the diverse channel characteristics are taken into account. An expression for CCM is derived in terms of equivalent fraction of air time by explicitly taking the radio heterogeneity into consideration. Using CCM as one of the key performance measures, we propose a distributed algorithm (heuristic) that produces near-optimal JCAR solution. To evaluate the efficacy of our heuristics, we conduct extensive simulations using the network simulator NS2. To demonstrate implementation feasibility, we conducted various experiments for the proposed distributed JCAR algorithm on a multihop wireless network testbed with nine wireless nodes, each is equipped with single/multiple 802.11a/g cards. Both experimental and simulation results demonstrate the effectiveness and implementation easiness of our proposed software solution     

Routing Metrics and Protocols for Wireless Mesh Networks

WMNs are low-cost access networks built on cooperative routing over a backbone composed of stationary wireless routers. WMNs must deal with the highly unstable wireless medium. Therefore, the design of algorithms that consider link quality to choose the best routes are enabling routing metrics and protocols to evolve. In this work, we analyze the state of the art in WMN metrics and propose a taxonomy for WMN routing protocols. Performance measurements for a WMN, deployed using various routing metrics, are presented and corroborate our analysis.     

Information efficiency of multihop packet radio networks with channel-adaptive routing

This paper analyzes the benefit of adaptive routing based on knowledge of the channel state information in multihop, ad hoc wireless networks that use direct-sequence code-division multiple access. Cross-layer, channel-adaptive routing exploits the inherent spatial diversity of multihop wireless networks to select links with favorable channel conditions. The information efficiency, an extension of a previously used measure called expected progress, is used to evaluate performance. Results show that, combined with adaptive modulation, adaptive routing can improve performance in ad hoc networks by a factor of four to five in channels with Rayleigh fading and lognormal shadowing. The lack of position information in the routing decision would reduce performance by 25%. New approaches to channel-adaptive routing that enable rapid adaptivity to channel conditions are discussed.     

Path diversified multi-QoS optimization in multi-channel wireless mesh networks

Wireless mesh networks (WMNs) have become a promising solution for quick and low-cost spreading of Internet accesses and other network services. Given the mesh topology, multiple paths are often available between node pairs, which thus naturally endorse path-diversified transmission. Unfortunately, like in wired networks, discovering completely disjoint paths in a WMN remains an intractable problem. It indeed becomes more challenging given the interferences across wireless channels in a WMN, not to mention that applications may demand heterogeneous QoS optimizations across different paths. The availability of multiple channels in advanced WMNs however sheds new lights into this problem. In this paper, we show that, as long as the best channels with different QoS metrics are not overlapped between neighboring node pairs, complete disjoint paths with heterogeneous QoS targets are available in a multi-channel WMN. We present efficient solutions to discover such paths, particularly for bandwidth- and delay-optimization. We also develop novel algorithms for accurately estimating path bandwidth and delay in the multi-channel environment. These lead to the design of a practical protocol that extends the classical Ad hoc On-demand Multi-path Distance Vector (AOMDV). Through extensive simulations, we show that our protocol yields significant improvement over state-of-the-art multi-path protocols in terms of both end-to-end throughput and delay.