Bifunctional N-Oxides of Alkyldiamidoamines

A homologous series of new surface-active 1,1-bis{[3-(N,N-dimethylamino)ethyl]-amido}alkane-di-N-oxides were synthesized in the reaction of an appropriate diethyl 2-alkylmalonate with N,N-dimethylethylenediamine followed by oxidation with an aqueous solution of hydrogen peroxide. The adsorption isotherms of their aqueous solutions were measured and evaluated to obtain adsorption parameters: critical micelle concentration (CMC), surface excess concentration (Γ_CMC), equilibrium surface tension at the CMC (γ _CMC), cross-sectional area of the adsorbed surfactant molecule (A _CMC), standard free energies of adsorption and micellization

Absolute potential measurements in solid and aqueous electrochemistry using two Kelvin probes and their implications for the electrochemical promotion of catalysis

  The concept of absolute electrode potential in aqueous and solid electrochemistry is discussed in light of the first experimental investigation utilizing a two Kelvin probe system which allows for direct in situ measurement of the work functions of both the, emersed or spillover modified, working and reference electrodes. In both cases, i.e. emersed electrodes in aqueous electrochemistry and spillover-modified electrodes in solid electrochemistry, it is found that the following two equations relate the working–reference electrode potential difference, U _WR, and the work functions, Φ_W and Φ_R of the emersed or spillover-modified working and reference electrodes:

Grafting of Methacrylic Acid and Other Vinyl Monomers Onto Cotton Fabric Using Ce (IV) Ion–Cellulose Thiocarbonate Redox System

Graft copolymerization of methacrylic acid (MAA) onto cotton fabric using tetravalent ceric ion (Ce^IV)–cellulose thiocarbonate redox system was investigated under different conditions including pH of the polymerization medium (1–4), ceric sulphate (CS) concentration (4–20 m mole/l), MAA concentration (1%–6%), polymerization time (1/4–2 h) and polymerization temperature (0–70°C). Results obtained indicated that the optimal conditions for MAA grafting onto cotton fabric using the said redox system consisted of: [CS], 20 m mole/l; [MAA], 4%; pH of the medium, 2; time, 2 h; temperature, 60 °C keeping a material-to-liquor ratio at 1:0. Applying optimized conditions to different monomers, namely, acrylic acid (AA), methacrylic acid (MAA), acrylamide (Aam), acrylonitrile (AN), butyl acrylate (BuA), methyl methacrylate (MMA), ethyl methacrylate (EMA) and glycidyl methacrylate (GMA) onto the same substrate, the rates of grafting followed the order:

Electrochemical redox reactions of chromium and iron ions in molten NaCl–2CsCl eutectic for pyro-reprocessing of nuclear fuels

Basic electrochemical and spectroscopic properties of Cr³⁺, Cr²⁺, Fe³⁺, and Fe²⁺ were studied to analyze the cyclic redox reactions of Cr and Fe, which may decrease the current efficiency of the electro-winning method using NaCl–2CsCl melts. The formal redox potentials of the and couples, and , in NaCl–2CsCl melts at 923 K were spectroelectrochemically determined to be −0.648 ± 0.005 V and , respectively. These values were determined by measuring electromotive force and UV–VIS absorption spectra at varying concentration ratios of trivalent and divalent ions. Cyclic voltammetry was also carried out to examine the characteristics of the voltammograms for the and couples in NaCl–2CsCl melts. The determined by the spectroelectrochemical method was close to that determined by cyclic voltammetry . The effect of temperature on the in NaCl–2CsCl melts was studied by cyclic voltammetry in the range from 823 to 1,023 K . Diffusion coefficients of Cr³⁺ and Cr²⁺, and , were determined between 823 and 1,023 K to be and , respectively. Molar absorptivities of Cr³⁺ and Cr²⁺ in NaCl–2CsCl melts at 923 K were determined to be 77.8 ± 2.4 M⁻¹ cm⁻¹ at 17,670 cm⁻¹ and 48.0 ± 1.4 M⁻¹ cm⁻¹ at 9,170 cm⁻¹, respectively. In addition, the effects of these ions on the cyclic redox reaction of the pyro-reprocessing process were discussed.     

Surface and Biological Activity of Organoammonium Hydrogen Selenite Surfactants

In this article we show steps taken toward the development of bactericidal and fungicidal synthetic cationic surfactants by the reaction of decyl, dodecyl or tetradecyl amine with selenious acid to produce a series of quaternary ammonium salts which consequently converted to copper and cobalt cationic complexes via complexing them with copper (II) or cobalt (II) ions. Surface properties of these surfactants were investigated. The surface properties studies included critical micelle concentration (CMC), maximum surface excess (Γ_max) and minimum surface area (A _min). Free energy of micellization ( ) and adsorption () were calculated. The antimicrobial activity was determined via the inhibition zone diameter of the prepared compounds measured against five strains of a representative group of microorganisms. FTIR spectra, elemental analyses and ¹ H-NMR spectra were obtained to insure the purity of the prepared compounds

Study of mass transfer in a vertically moving particle bed electrode

A study was made of the influence of process parameters on the mass-transfer coefficient in a flow-through cell with a cascade of rotating drums partially filled with conductive particles (called the vertically moving particle bed). Copper deposition from an acidic sodium sulphate solution was used as the model reaction. To evaluate the experimental data a macrohomogeneous mathematical model of potential and current density distribution inside the cell was developed. The electrolyte flow distribution between the empty space above the particle bed and through the bed was evaluated. On the basis of these results the following correlation is proposed:

Kinetics of electroless copper deposition using cobalt(II)-ethylenediamine complex compounds as reducing agents

Electroless copper deposition using Co(II)-ethylenediamine (En) complexes as reducing agents was investigated in 0.4–1.2 M En solutions at 50 and 70 °C. There is a complicated dependence of the process rate on pH, En concentration and temperature. A copper deposition rate up to 6 m h^–1 (50–70 °C) in relatively stable solutions (pH 6) can be achieved. The stoichiometry of the Cu(II) reduction at pH 6–7 corresponds to the reaction:

Effect of PVC on low-polar isobutylene polymerization in the presence of BCl3

Summary The isobutylene polymerizations in the presence of BCl₃ were carried out in dichloromethane ([M]=7 mol/l) at-20°C in the presence and absence of PVC. The products of polymerizations in the absence of PVC are oligoisobutylenes with a narrow molecular weight distribution ; their structure was analyzed by ¹H-NMR spectroscopy. In addition to the signals assigned to known unsaturated terminal structures [ 4.62 and 4.82-CH₂C(CH₃)=CH₂, 5.12-CH=C(CH₃)₂], a new intense signal was found at 5.09 ppm and assigned to the structure-CH=C(CH₃)CH₂CH₃. A mixture of isobutylene homopolymers and PVC grafted with isobutylene (approx. 9.5% wt. isobutylene grafted) is formed in the presence of PVC.     

Two New Organic–Inorganic Hybrids Based on [SiW12O40]4? Anion: Hydrothermal Syntheses, Crystal Structures, and Electrochemical Properties

Two new organic–inorganic hybrid compounds [\textCu^\textI ( \texten ) ₂ ( \textH ₂ \textO )] ₂ { ( \textSiW^\textVI _{1 1} \textW^\textV ₁\textO ₄₀ ) ₂ [ \textCu^\textII ( \texten ) ₂ ( \textH ₂ \textO )] ₂ [\textCu^\textII ( \texten ) ₂ ] ₂ }·6 \textH ₂ \textO [{\text{Cu}}^{\text{I}} \left( {\text{en}} \right)_{ 2} \left( {{\text{H}}_{ 2} {\text{O}}} \right)]_{ 2} \left\{ {\left( {{\text{SiW}}^{\text{VI}}_{ 1 1} {\text{W}}^{\text{V}}_{ 1}{\text{O}}_{ 40} } \right)_{ 2} \left[ {{\text{Cu}}^{\text{II}} \left( {\text{en}} \right)_{ 2} \left( {{\text{H}}_{ 2} {\text{O}}} \right)\left] {_{ 2} } \right[{\text{Cu}}^{\text{II}} \left( {\text{en}} \right)_{ 2} } \right]_{ 2} } \right\}{\cdot}6 {\text{H}}_{ 2} {\text{O}} (1) and (H₂ L)₂[SiW₁₂O₄₀]·H₂O (2) [en = ethylenediamine, L = 1,4-bis(3-pyridinecarboxamido)benzene], have been hydrothermally synthesized and characterized by IR, elemental analyses, TG analysis, and single-crystal X-ray diffraction. Structural analyses indicate that compound 1 exhibits an interesting three-dimensional(3D) cross-like supramolecular network through arrangement of a 1D organic–inorganic hybrid chain { ( \textSiW^\textVI _{1 1} \textW^\textV ₁ \textO ₄₀ ) ₂ [ \textCu^\textII ( \texten ) ₂ ( \textH ₂ \textO )] ₂ [\textCu^\textII ( \texten ) ₂ ] ₂ } ^2- . \left\{ {\left( {{\text{SiW}}^{\text{VI}}_{ 1 1} {\text{W}}^{\text{V}}_{ 1} {\text{O}}_{ 40} } \right)_{ 2} \left[ {{\text{Cu}}^{\text{II}} \left( {\text{en}} \right)_{ 2} \left( {{\text{H}}_{ 2} {\text{O}}} \right)\left] {_{ 2} } \right[{\text{Cu}}^{\text{II}} \left( {\text{en}} \right)_{ 2} } \right]_{ 2} } \right\}^{ 2- } . The compound 2 consists of protonated L ligand and [SiW₁₂O₄₀]⁴⁻ anion. The protonated L ligands have been extended into a 2D network via hydrogen-bonding interactions. The guest [SiW₁₂O₄₀]⁴⁻ clusters have been incorporated into the square voids of the 2D host network as templates. The electrochemical behavior and electrocatalysis of compound 2 bulk-modified carbon paste electrode (2-CPE) have been studied.     

The Effect of CO2 and H2O on the Kinetics of NO Reduction by CH4 Over Sr-Promoted La2O3

The influence of CO₂ and H₂O on the activity of 4% Sr-La₂O₃ mimics that observed with pure La₂O₃, and a reversible inhibition of the rate is observed. CO₂ causes a greater effect, with decreases in rate of about 65% with O₂ present and 90% in its absence, while with H₂O in the feed, the rate decreased around 35-40% with O₂ present or absent. The influence of these two reaction products on kinetic behavior can be described by assuming competitive adsorption on the surface, incorporating adsorbed CO₂ and H₂O in the site balance, and using rate expressions previously proposed for this reaction over Sr-promoted La₂O₃. In the absence of O₂, the rate expression is $$r_{N_2 } = \frac{{k'P_{{\text{NO}}} P_{{\text{CH}}_{\text{4}} } }}{{{\text{(1 + }}K_{{\text{NO}}} P_{{\text{NO}}} {\text{ + }}K_{{\text{CH}}_{\text{4}} } P_{{\text{CH}}_{\text{4}} } {\text{ + }}K_{{\text{CO}}_{\text{2}} } P_{{\text{CO}}_{\text{2}} } {\text{ + }}K_{{\text{H}}_{\text{2}} {\text{O}}} P_{{\text{H}}_{\text{2}} {\text{O}}} {\text{)}}^{\text{2}} }},$$ which yields a good fit to the experimental data and gives optimized equilibrium adsorption constants that demonstrate thermodynamic consistency. With O₂ in the feed, nondifferential changes in reactant concentrations through the reactor bed were accounted for by assuming integral reactor behavior and simultaneously considering both CH₄ combustion and CH₄ reduction of NO, which provided the following rate law for total CH₄ disappearance: $$(r_{{\text{CH}}_{\text{4}} } )_{\text{T}} = \frac{{k'_{{\text{com}}} P_{{\text{CH}}_{\text{4}} } P_{{\text{O}}_{\text{2}} }^{{\text{0}}{\text{.5}}} + k'_{{\text{NO}}} P_{{\text{NO}}} P_{{\text{CH}}_{\text{4}} } P_{{\text{O}}_{\text{2}} }^{{\text{0}}{\text{.5}}} }}{{{\text{(1 + }}K_{{\text{NO}}} P_{{\text{NO}}} {\text{ + }}K_{{\text{CH}}_{\text{4}} } P_{{\text{CH}}_{\text{4}} } {\text{ + }}K_{{\text{O}}_{\text{2}} }^{{\text{0}}{\text{.5}}} P_{{\text{O}}_{\text{2}} }^{{\text{0}}{\text{.5}}} {\text{ + }}K_{{\text{CO}}_{\text{2}} } P_{{\text{CO}}_{\text{2}} } {\text{ + }}K_{{\text{H}}_{\text{2}} {\text{O}}} P_{{\text{H}}_{\text{2}} {\text{O}}} {\text{)}}^{\text{2}} }}.$$ The second term of this expression represents N₂ formation, and it again fit the experimental data well. The fitting constants in the denominator, which correspond to equilibrium adsorption constants, were not only thermodynamically consistent but also provided entropies and enthalpies of adsorption that were similar to values obtained with other La₂O₃-based catalysts. Apparent activation energies typically ranged from 23 to 28 kcal/mol with O₂ absent and 31-36 kcal/mol with O₂ in the feed. With CO₂ in the feed, but no O₂, the activation energy for the formation of a methyl group via interaction of CH₄ with adsorbed NO was determined to be 35 kcal/mol.     

Magnetic cobalt-zinc ferrite/PVAc nanocomposite: synthesis and characterization

Metal oxide nanoparticles are the subject of current interest because of their unusual optical, electronic, and magnetic properties. In this work, cobalt zinc ferrite ( $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ ) nanoparticles have been synthesized successfully through redox chemical reaction in aqueous solution. The synthesized $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ nanoparticles have been used for the preparation of homogenous polyvinyl acetate-based nanocomposite ( $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} /{\text{PVAc}} $ ) via in situ emulsion polymerization method. Structural, morphological and magnetic properties of the products were determined and characterized in detail by X-ray powder diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). The XRD patterns of the $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ confirmed that the formed nanoparticles are single crystalline. According to TEM micrographs, the synthesized $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ nanoparticles had nano-needle morphology with an average particle size of 20 nm. The calculated coefficient of variation (CV) of nanoparticles diameters obtained by TEM micrographs was 16.77. The $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ nanoparticles were dispersed almost uniformly in the polymer matrix as was proved by SEM technique. The magnetic parameters of the samples, such as saturation magnetization (M _s) and coercivity (H _c) were measured, as well. Magnetization measurements indicated that the saturation magnetization of synthesized $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} /{\text{PVAc}} $ nanocomposites was markedly less than that of $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ magnetic nanoparticles. However, the nanocompoites exhibited super-paramagnetic behavior at room temperature under an applied magnetic field.     

Determination of equilibrium silver sulphate concentration in the system Cu-H2SO4-CuSO4-H2O-Ag2SO4-Ag as a function of composition

The value of the ratio \(\gamma _{{\text{Cu}}^{{\text{2 + }}} } /\gamma _{{\text{Ag}}^{\text{ + }} }^2 \) ( \(\gamma _{{\text{Cu}}^{{\text{2 + }}} } ,\gamma _{{\text{Ag}}^{\text{ + }} } \) -are the mean activity coefficients of copper and silver ions, respectively) was calculated from the measured emf of the cell $${\text{Cu(Hg)|H}}_{\text{2}} {\text{SO}}_{\text{4}} {\text{ (}}c_{\text{x}} {\text{)}} - {\text{CuSO}}_{\text{4}} {\text{ (}}c_{\text{y}} {\text{)|Hg}}_{\text{2}} {\text{SO}}_{\text{4}} {\text{, Hg}}$$ and the solubility of Ag₂SO₄ in H₂SO₄ (c _x) and CuSO₄ (c _y) solutions. The concentration of H₂SO₄ in the solution was varied from 0.5 to 2.1 mol dm^?3 that of CuSO₄ from 0.4 mol dm^?3 to saturation. The results were presented as a function: $$\frac{{\gamma _{{\text{Cu}}^{{\text{2 + }}} } }}{{\gamma _{{\text{Ag}}^{\text{ + }} }^2 }} = a_0 + a_1 c_{\text{x}} + a_2 c_{\text{y}} + a_3 c_{\text{x}}^{\text{2}} + a_4 c_{\text{x}} c_{\text{y}} + a_5 c_{\text{y}}^2 .$$ This function allows the estimation of the equilibrium silver ion concentration \(c_{{\text{Ag}}^{\text{ + }} }^{{\text{eq}}} \) in solutions containing both H₂SO₄ and CuSO₄ in the presence of metallic copper. The function is also very useful for the estimation of the \(c_{{\text{Ag}}^{\text{ + }} }^{{\text{eq}}} \) near a working copper electrode.     

Structure and Spectral Characteristics of 3D-Supramolecular Coordination Polymers Based on Copper Cyanide and Dimethylquinoxaline

The reactions of K₃[Cu(CN)₄], R₃SnCl (R = Me or ph) and 2,3-dimethyl quinoxaline (dmqox) in H₂O/acetonitrile media at room temperature afford the 3D-supramolecular coordination polymers (SCP) ³_￥ [ \textCu ₂ ( \textCN ) ₂ \textdmqox ] ^{ 3}_{\infty } \left[ {{\text{Cu}}_{ 2} \left( {\text{CN}} \right)_{ 2} {\text{dmqox}}} \right] , 1 and ³_￥ [ \textCu ₂ ( \textCN ) ₄ ·( \textPh ₃ \textSn ) ₂ ·\textdmqox ] ^{ 3}_{\infty } \left[ {{\text{Cu}}_{ 2} \left( {\text{CN}} \right)_{ 4} \cdot \left( {{\text{Ph}}_{ 3} {\text{Sn}}} \right)_{ 2} \cdot {\text{dmqox}}} \right] , 2. The structure of the tin free 1 consists of parallel zigzag chains connected by dmqox to form 2D-sheets containing hexagonal 18-atom fused Cu₆(CN)₄(dmqox)₂ rings. The interwoven sheets along the a axis are close packed by extensive H-bonds developing 3D-network structure. The structures of 1 and 2 are investigated by elemental analysis IR, NMR and mass spectra. The ESI⁺ and ESI⁻ mass spectra of 2 support its polymeric nature while the ESI⁺ mass spectrum confirms the expected M. W. suggested by elemental analysis. The ¹³C-NMR spectrum of 2 supports the fact that the network structure of 2 contains the rhombic [Cu₂(μ₃-CN)₂] motif. The structure of 2 was compared with the structure of the reported prototype ³_￥ [ \textCu ₂ ( \textCN ) ₄ ·( \textPh ₃ \textSn ) ₂ ·\textqox ] ^{ 3}_{\infty } \left[ {{\text{Cu}}_{ 2} \left( {\text{CN}} \right)_{ 4} \cdot \left( {{\text{Ph}}_{ 3} {\text{Sn}}} \right)_{ 2} \cdot {\text{qox}}} \right] as well as the other related structures.     

Promotional effects on a PtRu/C catalyst-electrode interfaced with aqueous electrolytes: electrochemical metal support interaction (EMSI) and electrochemical promotion of catalysis (EPOC)

The kinetics of the catalytic oxidation of H₂ on PtRu/C gas diffusion electrode (GDE) was studied by interfacing the electrode with aqueous electrolytes at different pH values. The conducting electrolytes were aqueous solutions of varying concentrations of KOH and HClO₄ so that the pH was ranging between 2 and 13. The open circuit catalytic reaction rates exhibit the lowest value at pH = 13, while the catalytic activity is progressively increasing with decreasing pH values. The enhancement of the open circuit catalytic reaction rate can be even an order of magnitude higher in the acidic solution with respect to the alkaline electrolyte. It is shown that the nature of the aqueous electrolyte plays the role of an active catalyst support for the PtRu/C electrode, which drastically affects its catalytic properties. This is substantiated through the electrochemical equilibrium charge transfer reactions at the catalyst-electrode/electrolyte interface:

Temperature programmed desorption of oxygen from Pd films interfaced with Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-doped ZrO<Subscript>2</Subscript>

The origin of the effect of non-faradaic electrochemical modification of catalytic activity (NEMCA) or Electrochemical Promotion was investigated via temperature-programmed-desorption (TPD) of oxygen, from polycrystalline Pd films deposited on 8 mol%Y₂O₃–stabilized–ZrO₂ (YSZ), an O²⁻ conductor, under high-vacuum conditions and temperatures between 50 and 250 °C. Oxygen was adsorbed both via the gas phase and electrochemically, as O²⁻, via electrical current application between the Pd catalyst film and a Au counter electrode. Gaseous oxygen adsorption gives two adsorbed atomic oxygen species desorbing at about 300 °C (state β₁) and 340–500 °C (state β₂). The creation of the low temperature peak is favored at high exposure times (exposure >1 kL) and low adsorption temperatures (T_ads < 200 °C). The decrease of the open circuit potential (or catalyst work function) during the adsorption at high exposure times, indicates the formation of subsurface oxygen species which desorbs at higher temperatures (above 450 °C). The desorption peak of this subsurface oxygen is not clear due to the wide peaks of the TPD spectra. The TPD spectra after electrochemical O²⁻ pumping to the Pd catalyst film show two peaks (at 350 and 430 °C) corresponding to spillover O_ads and according to the reaction:

Facile Electrospinning Preparation and Up-Conversion Luminescence Performance of Y3Al5O12:Er3+, Yb3+ Nanobelts

Electrospinning technique was used to prepare $ {\text{PVP}}/\left[ {{\text{Y}}\left( {{\text{NO}}_{ 3} } \right)_{ 3} + {\text{Yb}}\left( {{\text{NO}}_{ 3} } \right)_{ 3} + {\text{Er}}\left( {{\text{NO}}_{ 3} } \right)_{ 3} + {\text{Al}}\left( {{\text{NO}}_{ 3} } \right)_{ 3} } \right] $ composite nanobelts and novel structures of Y₃Al₅O₁₂:Er³⁺, Yb³⁺ (denoted as YAG:Er³⁺, Yb³⁺ for short) nanobelts have been successfully fabricated after calcination of the relevant composite nanobelts at 900 °C for 8 h. YAG:Er³⁺, Yb³⁺ nanobelts were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM) and fluorescence spectroscopy. XRD analysis indicated that YAG:Er³⁺, Yb³⁺ nanobelts were cubic in structure with space group I_a3d. SEM analysis and histograms revealed that the width of YAG:Er³⁺, Yb³⁺ nanobelts was ca. 1.8 ± 0.37 μm under the 95 % confidence level, and the thickness was ca. 81.8 nm. Up-conversion emission spectra analysis manifested that YAG:Er³⁺, Yb³⁺ nanobelts respectively emitted strong green and red emissions centering at 522, 554 and 648 nm under the excitation of a 980-nm diode laser. The green emissions were assigned to the energy levels transitions of $ ^{ 2} {\text{H}}_{ 1 1/ 2} ,^{ 4} {\text{S}}_{ 3/ 2} \to^{ 4} {\text{I}}_{ 1 5/ 2} $ of Er³⁺ ions, and the red emission originated from the energy levels transition of $ ^{ 4} {\text{F}}_{ 9/ 2} \to ^{ 4} {\text{I}}_{{{\text{l5}}/ 2}} $ of Er³⁺ ions. The up-conversion luminescence of YAG:Er³⁺, Yb³⁺ nanobelts doped with various concentrations of Yb³⁺ and Er³⁺ was studied and the optimum molar ratio of Yb³⁺ to Er³⁺ was found to be 15:1. CIE analysis demonstrated that color-tuned luminescence can be obtained by adjusting doping concentrations of Yb³⁺ and Er³⁺ ions, which could be applied in the fields of optical telecommunication and optoelectronic devices. The up-conversion luminescent mechanism and the formation mechanism of YAG:Er³⁺, Yb³⁺ nanobelts were also proposed.     

[CuL(H2O)2]{[CuL][Fe(CN)6]}2·2H2O (L=3,10-Bis(2-hydroxyethyl)-1,3,5,8,10,12-hexaazacyclotetradecane): A Novel Three-Dimensional Coordination Polymer via H-Bonded Linkages of One-Dimensional Zigzag Chain

A complex with the formula [CuL(H₂O)₂]{[CuL][Fe(CN)₆]}₂·2H₂O, where L=3,10-bis(2-hydroxyethyl)-1,3,5,8,10,12-hexaazacyclotetradecane, has been synthesized and crystallographically characterized. The structure is composed of a one-dimensional zigzag chain of units, and [CuL(H₂O)₂]²⁺ units. The one-dimensional zigzag chain extents through linkages. The adjacent two polymer chains are linked by the hydrogen bonding between [CuL(H₂O)₂]²⁺ and [Fe(CN)₆]^3–, forming a 3D supramolecular structure with inner hydrophilic channels. Magnetic susceptibility measurements show no exchange interaction between the Cu(II) and Fe(III) ions due to the longer (axial) bond length.     

NO abatement with CH4 in the presence of O2 on H-ZSM5 with Si/Al=15–200: the dependence of activity on the proton concentration

The abatement of NO with methane in the presence of oxygen was studied on commercial H-ZSM5 samples with Si/Al = 15–200 in a conventional flow apparatus. H-ZSM5 samples were used in the acid form or after exchanging protons with sodium ions to various extents. Their catalytic activity was compared with that of commercial H-mordenite and H-Y. On all H-ZSM5 catalysts, reaction rates R _NO and (molecules s⁻¹ g⁻¹) increased proportionally to the proton concentration, showing that either all protons or a constant fraction of them were equally active. On sodium-exchanged H-ZSM5 samples with Si/Al = 15–17, both R _NO and nearly exponentially increased with the proton concentration. Conversely, on sodium-exchanged H-ZSM5 with Si/Al = 50, both R _NO and linearly increased with the proton concentration. At lower Si/Al ratios, replacing the H-ZSM5 protons with sodium ions partly inactivated the remaining protons. This revised version was published online in July 2006 with corrections to the Cover Date.     

The O<Subscript>2</Subscript> + NH<Subscript>3</Subscript> Reaction Over Rh(110): Steady State Kinetics and Oscillatory Behavior

Abstract  

The kinetics of ammonia oxidation with oxygen over a Rh(110) surface were studied in the pressure range 10⁻⁵–10⁻⁴ mbar. Nitrogen was found to be the preferred product at low partial pressures ratios \textp_{\texto 2} :\textp_{\textNH 3} {\text{p}}_{{{\text{o}}_{ 2} }} :{\text{p}}_{{{\text{NH}}_{ 3} }} , while the NO pathway was favored with oxygen rich gas mixtures and at high temperature. The reactive sticking coefficient of O₂ reaches up to 0.05 under steady state conditions. Pronounced hysteresis effects in the reaction rates were found in T-cycling experiments. Sustained oscillations in the reaction rates occurred under isothermal conditions at T = 620 K at a total pressure of 4 × 10⁻⁵ mbar.     

Analysis of the kinetics for the H2 + - \frac{1}{2}O2 ⇌ H2O reaction on a hot Pt surface in the pressure range 0.10–10 Torr

The H₂ + O₂ ⇌ H₂O reaction on platinum at 700 and 1300 K has been studied. A stagnation flow geometry was used with a gas mixture of H₂ and O₂ at pressures between 0.10 and 10 Torr. Comparing SHG results with simulations using different reaction parameters, it was concluded that , and . LIF measurements showed an ambiguity in the choice of main water-producing channel. Both hydrogen addition with low sticking coefficients and hydroxyl disproportionation with high sticking coefficients are plausible. This revised version was published online in July 2006 with corrections to the Cover Date.