Cooperative deformation of a de novo designed protein

A de novo protein design has been made to understand the uniquepacking of natural proteins that have a ß/-barrelfold. A carefully designed 207 amino acid sequence was synthesizedusing an Escherichia coli expression system and the structuraland thermodynamic characteristics of the purified protein werestudied. At neutral pH the protein is soluble and monomeric,with large amounts of secondary structure and a hydrophobiccore, although the broad resonance peaks of its NMR spectrumsuggest that the designed protein does not have a unique structurewith tightly packed side chains. In an H–D exchange experiment,no amido protons of the designed protein exchanged slowly withdeuterons. At acidic pH, thermal unfolding was observedwitha remarkable change in the excess heat capacity measured directlyby a differential scanning microcalorimeter. The enthalpy andentropy differences at 110°C, extrapolated from analyzedthermodynamic parameters, are 1/3 of the common values for naturalproteins. These measurements indicate that the folding is significantlycooperative as expected, but that the protein is still looselypacked.     

Solution conformation of endothelin determined by means of 1H-NMR spectroscopy and distance geometry calculations

The structure of endothelin-1 (ET-1), an endothelial cell-derivedpeptide with vasoconstricting activity, was determined in anaqueous solution by means of a combination of NMR and distancegeometry calculations. The resulting structure is characterizedby an -helical conformation in the sequence region, Lys9-Cys15.Furthermore, an extended structure and a turn structure existin the Cys1-Ser4 and Ser5-Asp8 regions respectively, and nopreferred conformation was found for the C-terminal part ofthe peptide which was not uniquely constrained by the NMR data.These structural elements, the -helical structure in the sequenceportion, Cys-X-X-X-Cys, and the extended structure in Cys-X-Cys,are homologous to those found commonly in several neurotoxicpeptides.     

Identification of important functional environs in protein tertiary structures from the analysis of residue variation in 3-D: application to cytochromes c and carboxypeptidases A and B

A simple methodology is described to apply to aligned proteinsequence sets for which at least one representative 3-D C structureis known. The evolutionary variation observed at each residueposition in the sequence alignment is qualified by taking intoaccount the residue variation that has occurred at other positionslocated within 7 A (according to the probable chain fold). Thisexpresses the evolutionary behaviour of any residue positionin the more appropriate context of its immediate surroundingsand distinguishes between invariant residues on the basis ofthe variation of their environment. The highest mechanisticsignificance is attached to conserved residues in conservedsurroundings, but the quantitative nature of the analysis meansthat all residue vicinities can be ranked and merged accordingto the degree of conservation that they exhibit and the residuepositions that comprise them. Therefore, with the aid of thechain fold, contour maps can be constructed that show gradedfoci of evolutionary conservation in the underlying superstructureof the protein type, and the irregular shapes and extents oflarge conserved areas. To test the methodology, it was appliedto cytochromes c and the carboxypeptidases A and B.     

Molecular modeling of the amyloid-{beta}-peptide using the homology to a fragment of triosephosphate isomerase that forms amyloid in vitro

The main component of the amyloid senile plaques found in Alzheimer'sbrain is the amyloid-ß-peptide (Aß), a proteolyticproduct of a membrane precursor protein. Previous structuralstudies have found different conformations for the Aßpeptide depending on the solvent and pH used. In general, theyhave suggested an -helix conformation at the N-terminal domainand a ß-sheet conformation for the C-terminal domain.The structure of the complete Aß peptide (residues 1–40)solved by NMR has revealed that only helical structure is presentin Aß. However, this result cannot explain the large ß-sheetAß aggregates known to form amyloid under physiologicalconditions. Therefore, we investigated the structure of Aßby molecular modeling based on extensive homology using theSmith and Waterman algorithm implemented in the MPsrch program(Blitz server). The results showed a mean value of 23% identitywith selected sequences. Since these values do not allow a clearhomology to be established with a reference structure in orderto perform molecular modeling studies, we searched for detailedhomology. A 28% identity with an /ß segment of a triosephosphateisomerase (TIM) from Culex tarralis with an unsolved three-dimensionalstructure was obtained. Then, multiple sequence alignment wasperformed considering Aß, TIM from C.tarralis and anotherfive TIM sequences with known three-dimensional structures.We found a TIM segment with secondary structure elements inagreement with previous experimental data for Aß. Moreover,when a synthetic peptide from this TIM segment was studied invitro, it was able to aggregate and to form amyloid fibrils,as established by Congo red binding and electron microscopy.The Aß model obtained was optimized by molecular dynamicsconsidering ionizable side chains in order to simulate Aßin a neutral pH environment. We report here the structural implicationsof this study.     

Spectroscopic investigation of structure in octarellin (a de novo protein designed to adopt the {alpha}/{beta}-barred packing)

We present here a spectroscopic structural characterizationof octarellin, a recently reported de novo protein modelledon /ß-barrel proteins [K. Go raj, A.Renard and J.A.Martial(1990) Protein Engng, 3, 259–266]. Infrared and Ramanspectra analyses of octarellin‘s secondary structure revealthe expected percentage of -helices (30%) and a higher ß-sheetcontent (40%) than predicted from the design. When the Ramanspectra obtained with octarellin and native triosephosphateisomerase (a natural /ß-barrel) are compared, similarpercentages of secondary structures are found. Thermal denaturationof octarellin monitored by CD confirms that its secondary structuresare quite stable, whereas its native-like tertiary fold is not.Tyrosine residues, predicted to be partially hidden from solvent,are actually exposed as revealed by Raman and UV absorptionspectra. We conclude that the attempted /ß-barrelconformation in octarellin may be loosely packed. The criteriaused to design octarellin are discussed and improvements suggested.     

The de novo protein with grafted biological function: transferring of interferon blast-transforming activity to albebetin

The de novo protein albebetin has been designed recently toform a predetermined tertiary fold that has not yet been observedin natural proteins. An eight amino acid fragment (131–138)of human interferon ₂ carrying the blasttransforming activityof the protein was attached to the N-terminus of albebetin nextto its initiatory methionine residue. The gene of chimeric proteinwas expressed in a wheat germ cell-free translation system andsynthesized protein was tested for its compactness and stability.Its ability for receptor binding was also studied. We have shownthat albebetin with attached octapeptide is practically as compactas natural proteins of corresponding molecular weight and possesseshigh stability toward the urea-induced unfolding. It binds murinethymocyte receptor at a high affinity and activates the thymocyteblast transformation efficiently at a concentration of 10^-11M.     

A relational database of protein structures designed for flexible enquiries about conformation

A relational database of protein structure has been developedto enable rapid and flexible enquiries about the occurrenceof many aspects of protein architecture. The coordinates of294 proteins from the Brookhaven Data Bank have been processedby standard computer programs to generate many additional termsthat quantify aspects of protein structure. These terms includesolvent accessibility, main-chain and side-chain dihedral angles,and secondary structure. In a relational database, the informationis stored in tables with columns holding the different termsand rows holding the different entries for the terms. The differentrelational base tables store the information about the proteincoordinate set, the different chains in the protein, the aminoacid residues and ligands, the atomic coordinates, the saltbridges, the hydrogen bonds, the disulphide bridges and theclose tertiary contacts. The database was established underORACLE management system. Enquiries are constructed in ORACLEusing SQL (structured query language) which is simple to useand alleviates the need for extensive computer programs. A singletable can be searched for entries that meet various criteria,e.g. all protein solved to better than a given resolution. Thepower of the database occurs when several tables, or the entriesin a single table, are cross-correlated. For example the dihedralangles of proline in the fourth position in an -helix in highresolution structures can be rapidly obtained. The structuraldatabase provides a powerful tool to obtain empirical rulesabout protein conformation. This database of protein structuresis part of a joint project between Birkbeck College and LeedsUniversity to establish an integrated data resource of proteinsequences and structures (ISIS) that encodes the complex patternsof residues and coordinates that define protein conformation.The entire data resource (ISIS) will provide a system to guideall areas of protein modelling including structure prediction,site-directed mutagenesis and de novo protein design. The availabilityof ISIS is described in the paper.     

Engineering of protein epitopes: a single deletion in a snake toxin generates full binding capacity to a previously unrecognized antibody

Structural features associated with the ability of a monoclonalantibody (mAb) to discriminate between protein variants areidentified and engineered. The variants are the curaremimetictoxin from Naja nigricollis and erabutoxin a or b from Laticaudasemifasciata which differ from each other by 16 substitutionsand one insertion. The neutralizing mAb M1 recognizes with highaffinity a topographical epitope on the surface of toxin , butfails to recognize the erabutoxins although they possess mostof the residues forming the presumed epitope. Examinations ofthe toxin and erabutoxin 3-D structures and molecular dynamicssimulations reveal several differences between the variants.In particular, the region involving the ß-turn 17–24is organized differently. Analysis of the differences foundin this region suggests that the insertion (or deletion) atposition 18 of the variant amino add sequences is particularlyimportant in determining the differential cross-reactivity.To test this proposal, residue 18 was deleted in one erabutoxinusing sitedirected mutagenesis, and the biological propertiesof the resulting mutant were examined. We found that full antigenicitywas restored in the previously unrecognized variant. The implicationsof this finding are discussed.     

Over-production of 5-enolpyruvylshikimate-3-phosphate synthase in Escherichia coli: use of the T7 promoter

5-Enolpyruvylshikimate-3-phosphate (EPSP) synthase, the productof the Escherichia coli aroA gene, has been overproduced inE.coli BL21(DE3) under the control of the T7 gene 10 promoterand ribosome binding site, to a level of {small tilde}50% oftotal cell protein. EPSP synthase is the primary target of thepost-emergence herbicide, glyphosate, commonly known as Roundup^TM.A simple two step purification is described, which results in99% pure homogeneous protein (as determined by PAGE). The integrityof the protein has been compared with previously characterizedprotein from .E.coli AB2829(pKD501) by determination of itskinetic parameters, N-terminal protein and DNA sequences, aminoacid analysis and ¹³C-NMR spectroscopy. This new overproducingstrain readily provides the gram quantities of highly pure proteinrequired for NMR studies of the active site and the developmentof novel time-resolved solid-state NMR techniques currentlyunderway in this laboratory.     

Design of four-helix bundle protein as a candidate for HIV vaccine

To be efficient, a synthetic vaccine should contain differentT and B cell epitopes of human immunodeficiency virus (HIV)antigens, and the B epitope regions in the vaccine and in theHIV should be conformationally similar. We have suggested previouslythe construction of vaccines in the form of a protein with apredetermined tertiary structure, namely a four--helix bundle.Antigenic determinants of cellular and humoral immunity areblocks for the vaccine design. From experimentally studied HIV-1T and B cell epitopes, we constructed a sequence of a four-helixprotein TBI (T and B cell epitopes containing immunogen). Thegene of the protein was synthesized and the protein was producedin C600 Escherichia coli cells under recA promoter from Proteusmirabelis. CD spectroscopy of the protein demonstrated that30% of amino acid residues adopt an -helical conformation. Miceimmunized with TBI have shown both humoral and cellular immuneresponses to HIV-1. The obtained data show that the design ofTBI was successful. The synthesized gene structure makes possiblefurther reconstruction and improvement of the protein vaccinestructure.     

The 3.0 A crystal structure of xylose isomerase from Streptomyces olivochromogenes

The crystal structure of xylose isomerase [E.C. 5.3.1.5 [EC] ] fromStreptomyces olivochromogenes has been determined to 3.0 Åresolution. The crystals belong to space group P22₁2₁ with unitcell parameters a = 98.7, b = 93.9, c = 87.7. The asymmetricunit contains half of a tetrameric molecule of 222 symmetry.The two-fold axis relating the two molecules in the asymmetricunit is close to where a crystallographic two-fold would beif the space group were 1222. This causes the diffraction patternto have strong 1222 pseudo-symmetry, so all data were collectedin this pseudo-space group. Since the sequence of this enzymehas not been reported, a polyalanine backbone has been fittedto the electron density. Xylose isomerase has two domains: theN-terminal domain is an eight-stranded /ß barrel of299 residues. The C-terminal domain is a large loop of 50 residueswhich is involved in inter-molecular contacts. Comparison ofxylose isomerase with the archetypical /ß barrel protein,triose phosphate isomerase, reveals that the proteins overlapbest when the third (ß) strand of xylose isomeraseis superimposed on the first (ß) strand of triosephosphate isomerase. This same overlap has also been found betweenthe muconate lactonising enzyme and triose phosphate isomerase[Goldman et al. (1987) J. Mol. Biol., in press].     

The structure-function relationship of the lipases from Pseudomonas aeruginosa and Bacillus subtilis

Within the BRIDGE T-project on lipases we investigate the structure-functionrelationships of the lipases from Bacillus subtilis and Pseudomonasaeruginosa. Construction of an overproducing Bacillus. strainallowed the purification of > 100 mg lipase from 30 l culturesupernatant. After testing a large variety of crystallizationconditions, the Bacillus lipase gave crystals of reasonablequality in PEG-4000 (38-45%), Na₂SO₄ and octyl-ß-glucosideat 22°C, pH 9.0. A 2.5 Å; dataset has been obtainedwhich is complete from 15 to 2.5 A resolution. P.aeruginosawild-type strain PAC1R was fermented using conditions of maximumlipase production. More than 90% of the lipase was cell boundand could be solubilized by treatment of the cells with TritonX-100. This permitted the purification of 50 mg lipase. So far,no crystals of sufficient quality were obtained. Comparisonof the model we built for the Pseudomonas lipase, on the basisof sequences and structures of various hydrolases which werefound to possess a common folding pattern (/ß hydrolasefold), with the X-ray structure of the P.glumae lipase revealedthat it is possible to correctly build the structure of thecore of a protein even in the absence of obvious sequence homologywith a protein of known 3-D structure.     

Studies of the pore-forming domain of a voltage-gated potassium channel protein

Recent mutagenesis studies nave identified a stretch of aminoacid residues which form the ion-selective pore of the voltage-gatedpotassium channel. It has been suggested that this sequenceof amino acids forms a ß-barrel structure making upthe structure of the ion-selective pore [Hartman,H.A., Kirsch,G.E.,DreweJ.A., Taglialatela.M., Joho.R.H. and Brown,A.M. (1991)Science, 251, 942–944; YeUen.G., Jurman,M.E., Abramson,T.and MacKinnon,R. (1991) Science, 251, 939–942; Yool,AJ.and Schwarz.T.L. (1991) Nature, 349, 700–704]. We havesynthesized a polypeptide corresponding to this amino add sequence(residues 431–449 of the ShA potassium channel from Drosophila).A tetrameric version of this sequence was also synthesized byUnking together four of these peptldes onto a branching lysinecore. Fourier transform infrared (FT-LR) and circular dichroism(CD) spectroscopy have been used to investigate the structureof these peptides after their reconstitution into lyso phos-phatidylcholinemicelles and lipid bilayers composed of dimyristoyl phosphatidyfcholineand dimyristoyl phosphatidyl-glycerol. The spectroscopic studiesshow that these peptides are predominantly a-helical in theselipid environments. When Incorporated into planar lipid bilayersboth peptides induce ion channel activity. Molecular modellingstudies based upon the propensity of these peptides to forman -helical secondary structure in a hydrophobfc environmentare described. These results are discussed in the light of recentmutagenesis and binding studies of the Drosophila Shaker potassiumion channel protein     

Analysis of the structure of Pseudomonas glumae lipase

The lipase produced by Pseudomonas glumae is monomeric in thecrystalline state and has a serine protease-like catalytic triad;Ser87-His285-Asp263. The largest domain of the protein resemblesclosely a subset of the frequently observed /ß-hydrolasefold and contains a well-defined calcium site. This paper describesstructural analysis of this protein, focusing on (i) structuralcomparison with the lipase from Geotrichum candidum, (ii) theprobable nature of the conformational change involved in substratebinding and (iii) structural variations amongst the family ofPseudomonas Upases. This analysis reveals similarities betweenP.glumae lipase and G.candidum lipase involving secondary structuralelements of the hydrolase core and the loops carrying the catalyticserine and histidine residues. A possible functional equivalencehas also been identified between parts of the two moleculesthought to be involved in a confonmational change. In addition,determination of the structure of P.glumae lipase has allowedrationalization of previously reported protein engineering experiments,which succeeded in improving the stability of the enzyme withrespect to proteolysis.     

The influence of Glu44 and Glu56 of cytochrome b5 on the protein structure and interaction with cytochrome c

The gene encoding trypsin-solubilized bovine liver microsomalcytochrome b₅ (82 residues in length) has been mutated, in whichthe codons of Glu44 and Glu56 were changed to those of Ala.The mutated genes were expressed in Escherichia coli successfullyand three mutant proteins (E44A, E56A and E44/56A) were obtained.The UV-visible, CD and ¹H NMR spectra of proteins have beenstudied. The results show that the mutagenesis at surface residuesdoes not alter the secondary and tertiary structures of cytochromeb₅ significantly. The interactions between recombinant cytochromeb₅ and its mutants with cytochrome c were studied by using opticaldifference spectra. The results demonstrated that both Glu44and Glu56 of cytochrome b₅ participate in the formation of acomplex between cytochrome b₅ and cytochrome c.     

1.85 A structure of anti-fluorescein 4-4-20 Fab

The crystal complex of fluorescein bound to the high-affinityanti-fluorescein 4-4-20 Fab {K_a = 10¹⁰ M^–1 at 2°C)has been determined at 1.85 Å. Isomorphous crystals oftwo isoelectric forms (p1 = 7.5 and 7.9) of the antifluorescein4-4-20 Fab, an IgG2A [Gibson et al (1988)Proteins: Struct. FunctGenet., 3, 155–160], have been grown. Both complexes crystallizewith one molecule in the asymmetric unit in space group P1,with a = 42.75 Å, b =43.87 Å, c = 58.17 Å, = 95.15° , ß = 86.85° and = 98.01°.The final structure has an R value of 0.188 at 1.85 Åresolution. Interactions between bound fluorescein, the complementarity-determiningregions (CDRs) of the Fab and the active-site mutants of the4-4-20 single-chain Fv will be discussed. Differences were foundbetween the structure reported here and the previously reported2.7 Å 4-4-20 Fab structure [Herron et al. (1989) Proteins:Struct. Fund., 5, 271–280]. Our structure determinationwas based on 26 328 unique reflections — four times theamount of data used in the previous report. Differences in thetwo structures could be explained by differences in interpretingthe electron density maps at the various resolutions. The r.m.s.deviations between the variable and constant domains of thetwo structures were 0.77 and 1.54 Å, respectively. Fourregions of the light chain and four regions of the heavy chainhad r.m.s. backbone deviations of >4 Å. The most significantof these was the conformation of the light chain CDR 1.     

High-level expression, purification, kinetic characterization and crystallization of protein farnesyltransferase -subunit C-terminal mutants

Protein farnesyltransferase (FPT) is a 97 000 Da heterodimericenzyme that catalyzes post-translational farnesylation of manycellular regulatory proteins including p21 Ras. To facilitatethe construction of site-directed mutants, a novel translationallycoupled, two-cistron Escherichia coli expression system forrat FPT has been developed. This expression system enabled yieldsof >5 mg of purified protein per liter of E.coli cultureto be obtained. The E.coli-derived FPT demonstrated an activitycomparable to that of protein isolated from other sources. Thereported expression system was used to construct three ß-subunitC-terminal truncation mutants, 5, 10 and 14, which were designedto eliminate a lattice interaction between the ß-subunitC-terminus of one molecule and the active site of a symmetry-relatedmolecule. Steady-state kinetic analyses of these mutants showedthat deletion up to 14 residues at the C-terminus did not reducethe value of k_cat; however, K_m values for both peptide and FPPincreased 2–3-fold. A new crystalline form of FPT was obtainedfor the 10 C-terminal mutant grown in the presence of the substrateanalogs acetyl-Cys-Val-Ile-Met-COOH peptide and -hydroxyfarnesylphosphonicacid. The crystals diffract to beyond 2.0 Å resolution.The refined structure clearly shows that both substrate analogsadopt extended conformations within the FPT active site cavity.     

Graphical representation of the salient conformational features of protein residues

A composite plot for depicting in two dimensions the conformationand the secondary structural features of protein residues hasbeen developed. Instead of presenting the exact values of themain- and side-chain torsion angles (, and ₁), it indicatesthe region in the three-dimensional conformational space towhich a residue belongs. Other structural aspects, like thepresence of a cis peptide bond and disulfide linkages, are alsodisplayed. The plot may be used to recognize patterns in thebackbone and side-chain conformation along a polypeptide chainand to compare protein structures derived from X-ray crystallography,NMR spectroscopy or molecular modelling studies and also tohighlight the effect of mutation on structure.     

Alignment of protein sequences using secondary structure: a modified dynamic programming method

A method for comparison of protein sequences based on theirprimary and secondary structure is described. Protein sequencesare annotated with predicted secondary structures (using a modifiedChou and Fasman method). Two lettered code sequences are generated(Xx, where X is the amino acid and x is its annotated secondarystructure). Sequences are compared with a dynamic programmingmethod (STRALIGN) that includes a similarity matrix for boththe amino acids and secondary structures. The similarity valuefor each paired two-lettered code is a linear combination ofsimilarity values for the paired amino acids and their annotatedsecondary structures. The method has been applied to eight globinproteins (28 pairs) for which the X-ray structure is known.For protein pairs with high primary sequence similarity (>45%),STRALIGN alignment is identical to that obtained by a dynamicprogramming method using only primary sequence information.However, alignment of protein pairs with lower primary sequencesimilarity improves significantly with the addition of secondarystructure annotation. Alignment of the pair with the least primarysequence similarity of 16% was improved from 0 to 37% ‘correct’alignment using this method. In addition, STRALIGN was successfullyapplied to seven pairs of distantly related cytochrome c proteins,and three pairs of distantly related picornavirus proteins.