Synthesis and characterization of star‐shaped PLLA with sorbitol as core and its microspheres application in controlled drug release

The purpose of this study was to investigate the suitability of a six‐arm star‐shaped poly(l ‐lactide)s (s‐PLLA) as controlled drug carriers for hydrophobic drug molecules. First, s‐PLLA was synthesized by ring‐opening polymerization of l ‐lactide using sorbitol as initiator and stannous octoate as catalyst. The structure and molecular weight (M_w) of s‐PLLA was characterized with ¹H NMR, ¹³C NMR, and GPC. Second, rifampicin (RIF) used as a model drug was encapsulated within the microspheres of s‐PLLA via oil‐in‐water emulsion/solvent evaporation technique. The morphology, drug encapsulation efficiency (EE), and in vitro release behavior of the prepared microspheres were studied in details. Results indicated that the average diameters of s‐PLLA microspheres can be controlled between 8 and 20 µm by varying the copolymer's concentration or M_w . The EE of RIF was mainly determined by the concentration of s‐PLLA. The in vitro study showed that the burst release behavior can be depressed by increasing the M_w of the s‐PLLA. Present work suggests that the synthesized s‐PLLA could be used as a new material for drug delivery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42213.     

Synthesis and characterization of amphiphilic pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine copolymers and their micelles as a drug carrier

A new Pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine (DPPE) (Pluronic (F68)–DPPE) copolymer was synthesized with Pluronic (F68) and DPPE. The chemical structure and physical properties of copolymers were determined by FTIR, ¹H NMR, ¹³C NMR, ³¹P NMR, and TGA. Environmental scanning electron microscopy, fluorescence spectroscopy, and dynamic light scattering method confirmed the formation of copolymeric micelles of Pluronic (F68)‐DPPE. To estimate the feasibility as novel drug carriers, the copolymer micelles were prepared by the phase separation dialysis method. Amphotericin B as a lipophilic model drug was incorporated into copolymeric micelles and the drug release behavior was investigated. It was found that the chemical composition of the micelle was a key factor in controlling micelles size, drug‐loading content, and drug release behavior. As DPPE segment weight ratio increased, the micelle size and drug‐loading content increased, and the drug release rate decreased. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Intrinsic factor and vitamin B12 complex‐loaded poly[lactic‐co‐(glycolic acid)] microspheres: preparation,characterization and drug release

BACKGROUND: Vitamin B12 is an essential vitamin required by all mammals. Absorption of vitamin B12 is facilitated by binding of intrinsic factor–vitamin B₁₂ complex to specific receptors in the ileum. In humans a deficiency of this vitamin or a lack of intrinsic factor leads to pernicious anaemia. The major objective of the present study was to prepare intrinsic factor–vitamin B12 complex‐loaded poly[lactic‐co‐(glycolic acid)] (PLGA)‐based microparticles and to investigate their release kinetics. RESULTS: PLGA copolymer was synthesized by the ring‐opening polymerization method and characterized using gel permeation chromatography, Fourier transform infrared spectroscopy and ¹H NMR. The glass transition temperature measurement showed a single T_g at 40 °C. The intrinsic factor–vitamin B12 complex‐loaded PLGA microspheres were prepared by a water‐in‐oil‐in‐water double emulsion solvent extraction/evaporation technique. An environmental scanning electron microscopy investigation demonstrated that the PLGA particles had a mean particle diameter of 38 µm. Interestingly, different drug release patterns (bi‐ and triphasic ones) were observed for vitamin B12‐loaded and intrinsic factor–vitamin B12 complex‐loaded microspheres. In contrast to the rapid release of vitamin B12 by itself, in vitro release tests showed that intrinsic factor and vitamin B12 in the complex were released from PLGA microspheres in a sustained manner over 15 days. CONCLUSION: PLGA microspheres can be an effective carrier for the intrinsic factor–vitamin B12 complex. Copyright © 2007 Society of Chemical Industry     

Drug‐release behavior of chitosan‐g‐poly(vinyl alcohol) copolymer matrix

Chitosan‐g‐poly(vinyl alcohol) (PVA) copolymers with different grafting percent were prepared by grafting water‐soluble PVA onto chitosan. The drug‐release behavior was studied using the chitosan‐g‐PVA copolymer matrix containing prednisolone in a drug‐delivery system under various conditions. The relationship between the amount of the released drug and the square root of time was linear. From this result, the drug‐release behavior through the chitosan‐g‐PVA copolymer matrix is shown to be consistent with Higuchi's diffusion model. The drug‐release apparent constant (K_H) was slightly decreased at pH 1.2, but increased at pH 7.4 and 10 according to the increasing PVA grafting percent. Also, K_H was decreased by heat treatment and crosslinking. The drug release behavior of the chitosan‐g‐PVA copolymer matrix was able to be controlled by the PVA grafting percent, heat treatment, or crosslinking and was also less affected by the pH values than was the chitosan matrix. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 458–464, 1999     

Synthesis,characterization, and drug‐release behavior of amphiphilic quaternary ammonium chitosan derivatives

A new type of amphiphilic quaternary ammonium chitosan derivative, 2‐N‐carboxymethyl‐6‐O‐diethylaminoethyl chitosan (DEAE–CMC), was synthesized through a two‐step Schiff base reaction process and applied to drug delivery. In the first step, benzaldehyde was used as a protective agent for the incorporation of diethylaminoethyl groups to form the intermediate (6‐O‐diethylaminoethyl chitosan). On the other hand, NaBH₄ was used as a reducing agent to reduce the Schiff base, which was generated by glyoxylic acid, for the further incorporation of carboxymethyl groups to produce DEAE–CMC. The structure, thermal properties, surface morphology, and diameter distribution of the resulting chitosan graft copolymers were characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, thermogravimetric analysis, differential scanning calorimetry, X‐ray powder diffraction, scanning electron microscopy, and laser particle size analysis. Benefiting from the amphiphilic structure, DEAE–CMC was able to be formed into microspheres in aqueous solution with an average diameter of 4.52 ± 1.21 μm. An in vitro evaluation of these microspheres demonstrated their efficient controlled release behavior of a drug. The accumulated release ratio of vitamin B₁₂ loaded DEAE–CMC microspheres were up to 93%, and the duration was up to 15 h. The grafted polymers of DEAE–CMC were found to be blood‐compatible, and no cytotoxic effect was shown in human SiHa cells in an MTT [3‐(4, 5‐dimethyl‐thiazol‐2‐yl)‐2, 5‐diphenyltetrazolium bromide] cytotoxicity assay. These results indicate that the DEAE–CMC microspheres could be used as safe, promising drug‐delivery systems. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39890.     

Thermosensitive polymeric micelles based on the triblock copolymer poly(d,l‐lactide)‐b‐poly(N‐isopropyl acrylamide)‐b‐poly(d,l‐lactide) for controllable drug delivery

A thermosensitive amphiphilic triblock copolymer, poly(d,l ‐lactide) (PLA)‐b‐poly(N‐isopropyl acrylamide) (PNIPAAM)‐b‐PLA, was synthesized by the ring‐opening polymerization of d,l ‐lactide; the reaction was initiated from a dihydroxy‐terminated poly(N‐isopropyl acrylamide) homopolymer (HO‐PNIPAAM‐OH) created by radical polymerization. The molecular structure, thermosensitive characteristics, and micellization behavior of the obtained triblock copolymer were characterized with Fourier transform infrared spectroscopy, ¹H‐NMR, gel permeation chromatography, dynamic light scattering, and transmission electron microscopy. The obtained results indicate that the composition of PLA‐b‐PNIPAAM‐b‐PLA was in good agreement with what was preconceived. This copolymer could self‐assemble into spherical core–shell micelles (ca. 75–80 nm) in aqueous solution and exhibited a phase‐transition temperature around 26 °C. Furthermore, the drug‐delivery properties of the PLA‐b‐PNIPAAM‐b‐PLA micelles were investigated. The drug‐release test indicated that the synthesized PLA‐b‐PNIPAAM‐b‐PLA micelles could be used as nanocarriers of the anticancer drug adriamycin (ADR) to effectively control the release of the drug. The drug‐delivery properties of PLA‐b‐PNIPAAM‐b‐PLA showed obvious thermosensitive characteristics, and the release time of ADR could be extended to 50 h. This represents a significant improvement from previous PNIPAAM‐based drug‐delivery systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45304.     

Thermosensitive self‐assembly micelles from A2BA2‐type poly(N‐isopropyl acrylamide)2‐b‐Poly(lactic acid)‐b‐Poly(N‐isopropyl acrylamide)2 four‐armed star block copolymers and their applications as drug carriers

A novel A₂BA₂‐type thermosensitive four‐armed star block copolymer, poly(N‐isopropyl acrylamide)₂‐b‐poly(lactic acid)‐b‐poly(N‐isopropyl acrylamide)₂, was synthesized by atom transfer radical polymerization and characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, and size exclusion chromatography. The copolymers can self‐assemble into nanoscale spherical core–shell micelles. Dynamic light scattering, surface tension, and ultraviolet–visible determination revealed that the micelles had hydrodynamic diameters (D_h) below 200 nm, critical micelle concentrations from 50 to 55 mg/L, ζ potentials from ?7 to ?19 mV, and cloud points (CPs) of 34–36°C, depending on the [Monomer]/[Macroinitiator] ratios. The CPs and ζ potential absolute values were slightly decreased in simulated physiological media, whereas D_h increased somewhat. The hydrophobic camptothecin (CPT) was entrapped in polymer micelles to investigate the thermo‐induced drug release. The stability of the CPT‐loaded micelles was evaluated by changes in the CPT contents loaded in the micelles and micellar sizes. The MTT cell viability was used to validate the biocompatibility of the developed copolymer micelle aggregates. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4137–4146, 2013     

pH‐responsive poly(ethylene glycol)‐poly(ϵ‐caprolactone)‐poly(glutamic acid) polymersome as an efficient doxorubicin carrier for cancer therapy

The synthesis, characterization and potential application in the doxorubicin (Dox) delivery system of a biodegradable polypeptide‐based block copolymer, poly(ethylene glycol)₂₀₀₀‐poly(?‐caprolactone)₆₀₀₀‐poly(glutamic acid)₁₀₀₀ (PEG₂₀₀₀‐PCL₆₀₀₀‐PGA₁₀₀₀), was investigated. The copolymer was synthesized via ring‐opening polymerization and characterized by ¹H NMR and Fourier transform IR. The synthesized copolymer could self‐assemble into aggregates and the critical aggregation concentration was 0.23 mg mL^?1. Transmission electron microscopy indicated that spherical polymersomes formed with a desirable size about 180 nm. Therefore Dox was encapsulated into these polymersomes, and then we investigated its applications in a drug delivery system. These Dox‐loaded polymersomes (PolyDox) were characterized by dynamic light scattering, zeta potential and pH responsiveness measurements. In vitro drug release indicated that the release rate of drug from PolyDox was pH‐responsive and significantly decreased. The drug pharmacokinetic parameters were improved in comparison to the group treated with free Dox, which proved the prolonged Dox release from PolyDox. A WST‐1 assay indicated a low toxicity and good compatibility of copolymer to cells within 48 h. The results also showed that PolyDox appeared to induce a higher anti‐tumor effect. Cell uptake results indicated that PolyDox displayed higher cellular uptake in A549 cells. Endocytosis inhibition results demonstrated that the internalization of PolyDox was mostly mediated by the fluid‐phase endocytosis pathway. © 2017 Society of Chemical Industry     

Surfactant‐free nanoparticles of poly(DL‐lactide‐co‐glycolide) prepared with poly(L‐lactide)/ poly(ethylene glycol)

Surfactant‐free nanoparticles of poly(DL ‐lactide‐co‐glycolide) (PLGA) nanoparticles were prepared with or without poly(L ‐lactide)‐poly(ethylene oxide) (LE) diblock copolymer (abbreviated as PLGA/LE and PLGA nanoparticles) by dialysis method. LE diblock copolymer was used to make PLGA nanoparticles to alternate conventional surfactant. The size of PLGA and PLGA/LE nanoparticles was 295.3 ± 171.3 and 307.6 ± 27.2 nm, respectively, suggesting LE diblock copolymer might be coated onto the surface of nanoparticles. Observation of scanning electron microscope (SEM) showed that PLGA/LE nanoparticles have spherical shapes ranging ～ 200–500 nm. In ¹H‐NMR study, characteristic peaks of the methyl protons of PLGA disappeared in D₂O, whereas characteristic peaks of the methyl proton of both PEG and PLGA were shown in both CDCl₃ and D₂O, indicating that LE diblock copolymer coated on the surface of the PLGA nanoparticles. The higher the initial content of drug, the higher the drug contents and the lower the loading efficiency. PLGA/LE nanoparticles at higher drug contents resulted in slower adriamycin·HCl (ADR) release rate than that of lower drug contents. Also, slower release rate of ADR was achieved by entrapped into the PLGA/LE nanoparticles, whereas LE polymeric micelles showed rapid ADR release. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1116–1123, 2003     

Preparation,characterization, and drug‐release properties of poly(N‐isopropylacrylamide) microspheres having poly(itaconic acid) graft chains

An inverse suspension polymerization method for the preparation of thermoresponsive hydrogel microspheres based on N‐isopropylacrylamide was described in this article. The polymerization reaction was carried out at 200 rpm stirring rate and the microspheres obtained were in the size range of 71–500 μm in the swollen states. The particles were sieved by using ASTM sieves. The selected fraction (180–250 μm) of poly(N‐isopropylacrylamide) (PNIPAAm) microspheres was used for radiation‐induced modification with itaconic acid (IA) to obtain PNIPAAm/poly(itaconic acid) graft copolymer. Viagra and lidocaine were used as model drugs for the investigation of controlled‐release behavior of the microspheres. Incorporation of IA graft chains onto microspheres enhanced significantly the uptake of both drugs and further controlled release at specific pH values. The release studies showed that some of the basic parameters affecting the drug‐loading and ‐release behavior of the microspheres were pH, temperature, particle size, and chemical nature of drug. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1115–1124, 2005     

Studies on Micellar Behavior of PEO‐PBO or PEO‐PBO‐PEO Copolymers,or Surface Active Amphiphilic Ionic Liquids in Aqueous Media and Exploration of the Micellar Solutions for Solubilization of Dexamethasone and its Delayed Release

The aggregation behavior of a di‐ and tri‐block copolymers of type PEO‐PBO, PEO‐PBO‐PEO, surface‐active ionic liquid (SAIL) of type 4‐dodecyl‐4‐methylmorpholinium chloride [C₁₂mmor][Cl], and 1‐dodecyl‐1‐methylpyrrolidinium chloride [C₁₂mpyrr][Cl]) in water as well as in 10 mM of a poorly water soluble dexamethasone (dex) aqueous solution was studied by determining the critical micelle concentrations using drug solubilization, surface tension, and isothermal titration calorimetry (ITC) methods. ITC measurements were also made on solutions prepared by mixing the micellar aqueous solutions of copolymers and simple aqueous solutions of SAIL across the mole fractions at three different temperatures (298.15, 308.15, and 318.15 K). The thermodynamic parameters, namely Gibbs free energy (ΔG_m), enthalpy (ΔH_m), and entropy (ΔS_m), of micellization were calculated, and it was observed that the negative ΔG_m and positive ΔS_m for the mixture solutions increase with the increase in mole fraction of SAIL. Otherwise, the micellization is reported to be a spontaneous and highly entropy‐driven process. The dex‐solubilized micellar solutions were mixed with agar to obtain standing gels. The gel samples were dry‐cast into thin films, and the release of dex from films by simple dilution was monitored by UV measurements. The drug release data was fitted to several mechanistic models, and it was inferred that the release mechanism for dex from thin films is non‐Fickian for mixtures and Fickian in copolymer or SAIL micellar aqueous solutions. The transport of dex is diffusion‐controlled with diffusivities of 5.8–12 × 10^?11 m² s^?1 for copolymer micelles, 5–11 × 10^?11 m² s^?1 for micelles of SAIL, and 3–14 × 10^?11 m² s^?1 for the mixed micelles of copolymer and SAIL in aqueous media.     

Synthesis and characterization of conducting copolymer of Trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene with EDOT

Ferrocene‐substituted conducting polymer namely poly(trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene‐co‐3,4‐ethylenedioxythiophene) [P(MTFE‐co‐EDOT)] was synthesized and its electrochromic properties were studied. Monomer, MTFE, was obtained using 2‐(ferrocenyl)ethene and 3‐methyl‐4‐bromothiophene. The structure of monomer was determined via Fourier transform infrared spectroscopy (FTIR), ¹H‐NMR, and ¹³C‐NMR techniques. The copolymer was synthesized using this monomer and EDOT. The resulting copolymer P(MTFE‐co‐EDOT) was characterized by cyclic voltammetry, FTIR, scanning electron microscopy, atomic force microscopy, and UV–vis spectroscopy. The conductivity measurements of copolymer and PEDOT were accomplished by the four‐probe technique. Although poly(trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene) [P(MTFE)] reveals no electrochromic activity, its copolymer with EDOT has two different colors (violet and gray). Band gap (E_g) and λ_max of P(MTFE‐co‐EDOT) were determined. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Application of the biodegradable diblock copolymer poly(L‐lactide)‐block‐poly(L‐cysteine): Drug delivery and protein conjugation

A novel approach to self‐assembled and shell‐crosslinked (SCL) micelles from the diblock copolymer poly(L ‐lactide)‐block‐poly(L ‐cysteine) to be used as drug and protein delivery carriers is described. Rifampicin was used as a model drug. The drug‐loaded SCL micelles were obtained by self‐assembly of the copolymer in the presence of the drug in aqueous media. Their morphology and size were studied with dynamic light scattering and field emission scanning electron microscopy. The rifampicin loading capacity and encapsulation efficiency were studied with ultraviolet–visible spectrophotometry. The drug‐release rate in vitro depended on the oxidizing and reducing environment. Moreover, a straightforward approach to the conjugation of the copolymer with bovine serum albumin (BSA) was developed, and a gel electrophoresis test demonstrated that this conjugated BSA could be reversibly released from the copolymer substrate under reducing conditions. In conclusion, this L ‐cysteine copolymer can be used in drug delivery and in protein fixation and recovery. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Study on physiochemical structure and in vitro release behaviors of doxycycline‐loaded PCL microspheres

This study aimed to develop drug delivery system of doxycycline‐loaded polycaprolactone (PCL) microspheres. The investigated microsphere formulation can be considered for local application in bone infections and degenerative joint diseases, which generally require long‐term treatments via systemic drugs. PCL‐14 kDa and 65 kDa were used in microsphere preparation. Before release, the microspheres were characterized by scanning electron microscopy, differential scanning calorimetry, and X‐ray photoelectron spectroscopy. The mean particle size of microspheres was in the range of 74–122 µm and their drug loadings ranged between 10 and 30%. In vitro release profiles were described using the Higuchi and the Korsmeyer–Peppas equations. Diffusion model was applied to experimental data for estimating diffusion coefficients of microspheres; calculated as between 4.5 × 10^?10 and 9.5 × 10^?10 cm²/s. Although long‐term release from microspheres of PCL‐14 kDa obeyed diffusion model, PCL‐65 kDa microspheres showed this tendency only for some period. Modeling studies showed that the drug release mechanism was mainly dependent on loading and molecular weight differences. Release behavior of PCL‐65 kDa microspheres, however, might be better represented by derivation of a different equation to model for the total release period. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41768     

Preparation and release behavior of temperature‐ and pH‐responsive chitosan material

BACKGROUND: Chitosan is a polymer with good biocompatibility which makes it promising for potential applications in the field of drug delivery. A novel kind of copolymer, P(CS‐Ma‐graft‐NIPAm), was synthesized with chitosan (CS), maleic anhydride (Ma) and N‐isopropylacrylamide (NIPAm) by grafting and copolymerization. RESULTS: The copolymers were characterized using Fourier transform infrared, ¹H NMR and ultraviolet spectroscopies, and the molecular weight and polydispersity were determined using gel permeation chromatography. The aqueous solution properties of the copolymer and the controlled delivery of coenzyme A from it were also studied. The results showed that the copolymer had temperature and pH sensitivities, and that the release of coenzyme A from the copolymer was dependent on the release medium, namely the concentration of the copolymer, pH and temperature. Higher concentrations of the copolymer absorbed more coenzyme A than lower ones. Increasing temperature accelerated coenzyme A release from the copolymer. Also, the pH of the solution had a significant impact on the release of coenzyme A. CONCLUSION: These results suggest that the novel copolymer could be used in drug delivery systems. Copyright © 2007 Society of Chemical Industry     

Preparation and characterization of mPEG‐g‐α‐zein biohybrid micelles as a nano‐carrier

A new kind of block copolymer micelles methoxy polyethylene glycol (mPEG) grafted α‐zein protein (mPEG‐g‐α‐zein) was synthesized. The chemical composition of mPEG‐g‐α‐zein was identified with the help of FT‐IR and ¹H‐NMR. The biohybrid polymer can self‐assemble into spherical core–shell nanoparticles in aqueous solution. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to investigate the self‐assembled morphology of mPEG‐g‐α‐zein. Dynamic light scattering (DLS) results showed that the particle size of mPEG‐g‐α‐zein was about 90 nm. Moreover, the nanoparticles had a very low critical micelle concentration value with only 0.02 mg/mL. Then, the anticancer drug curcumin (CUR) was encapsulated into the biohybrid polymer micelles. The in vitro drug release profile showed a zero‐order release of CUR up to 12 h at 37°C. Cell viability studies revealed that the mPEG‐g‐α‐zein polymer exhibited low cytotoxicity for HepG2 cells (human hepatoma cells). Consequently, the mPEG‐g‐α‐zein micelles can be used as a potential nano‐carrier to encapsulate hydrophobic drugs and nutrients. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42555.     

Study on synthesis and application of collagen‐modified polylactic acid

To modify the degradability and improve the hydrophilicity of polylactic acid (PLA), collagen‐modified polylactide (CPLA) was synthesized by means of grafting modification method including chloridization and aminolysis, and its structure was characterized by FTIR, ¹H NMR, and fluorescein isothiocyanate‐labeled fluorescence spectra. Subsequently, the hydrophilicity and degradation behavior of CPLA were characterized. Finally, CPLA was used as a carrier for the preparation of the trypsin sustained release microspheres via the emulsion‐solvent evaporation technique, followed with its characterization. Results showed that the collagen had been grafted into PLA and the graft ratio of collagen measured about 6.7%. Water absorption behavior test indicated that the hydrophilicity of CPLA was significantly higher than PLA. Furthermore, degradability test revealed that the degradation behavior of PLA was obviously modified and there was no obvious acid‐catalyzed self‐accelerating degradation behavior in the degradation process of CPLA. It was also indicated that the encapsulation efficiency and drug content in trypsin‐loaded CPLA microspheres were all clearly higher than trypsin‐loaded PLA microspheres. The results suggested that CPLA showed a great potential as matrix for drug delivery. POLYM. COMPOS., 36:88–93, 2015. © 2014 Society of Plastics Engineers     

A novel dual stimuli‐responsive thiol‐end‐capped ABC triblock copolymer: synthesis via reversible addition–fragmentation chain transfer technique,and investigation of its self‐assembly behavior

A novel thermo‐ and pH‐responsive thiol‐end‐capped ABC triblock copolymer, namely poly(acrylic acid)‐block ‐poly(N ‐isopropylacrylamide)‐block ‐poly(? ‐caprolactone)–SH (PAA‐b ‐PNIPAAm‐b ‐PCL‐SH), was synthesized using a combination of ring‐opening polymerization and reversible addition–fragmentation chain transfer polymerization techniques. The chemical structures of all samples were characterized by means of Fourier transform infrared and ¹H NMR spectroscopies. The molecular weight of each segment was investigated using both ¹H NMR spectroscopy and gel permeation chromatography. The self‐assembly behavior of the PAA‐b ‐PNIPAAm‐b ‐PCL‐SH triblock copolymer under thermal and pH stimuli was fully investigated by means of fluorescence and UV–visible spectroscopies as well as dynamic light scattering measurements. The critical micelle concentration for the synthesized triblock copolymer was determined to be 0.0178 g L^?1 using the fluorescence probe technique. The average size of PAA‐b ‐PNIPAAm‐b ‐PCL‐SH micelles was determined to be 25 nm using transmission electron microscopy observations, and its lower critical solution temperature was determined to be 41–43 °C using UV–visible spectroscopy. © 2017 Society of Chemical Industry     

Synthesis and characterization of heat‐resistant N‐phenylmaleimide–styrene–maleic anhydride copolymers and application in acrylonitrile–butadiene–styrene resin

The heat‐resistant copolymer of N‐phenylmaleimide (NPMI)–styrene (St)–maleic anhydride (MAH) was synthesized in xylene at 125°C with di‐tert‐butyl diperoxyterephthalate as an initiator. The characteristics of the copolymer were analyzed by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy (¹H‐NMR and ¹³C‐NMR), gel permeation chromatography, and elemental analysis. The ¹³C‐NMR results show that the copolymer possessed random sequence distribution; this was also supported by the differential scanning calorimetry experiment, in which a single glass‐transition temperature (T_g) of 202.3°C was observed. The thermal stability and degradation mechanism of the copolymer were investigated by thermogravimetric analysis. Using the Kissinger equation and Ozawa equation, we proved a nucleation controlling mechanism with an apparent activation energy of 144 kJ/mol. Blends of acrylonitrile–butadiene–styrene with the NPMI–St–MAH copolymer with various contents were prepared with a twin‐screw extruder processes. The mechanical and thermal properties of the materials, such as the tensile and flexural strength, T_g's, and Vicat softening temperatures, were all enhanced with the addition of the modifier, whereas the melt flow index decreased. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of an amphiphilic hyperbranched poly(amine‐ester)‐co‐D,L‐lactide (HPAE‐co‐PLA) copolymers and their nanoparticles for protein drug delivery

A series of hyperbranched poly(amine‐ester)‐co‐D ,L ‐lactide (HPAE‐co‐PLA) copolymer were synthesized by ring‐opening polymerization of D ,L ‐lactide with Sn(Oct)₂ as catalyst to a fourth generation branched poly(amine‐ester) (HPAE‐OHs4). The chemical structures of copolymers were determined by FTIR, ¹H‐NMR, ¹³C‐NMR, and TGA. Double emulsion (DE) and nanoprecipitation (NP) method were used to fabricate the nanoparticles of these copolymers encapsulating bovine serum albumin (BSA) as a model. DSC thermo‐grams indicated that the nanoparticles with BSA kept stable below 40°C. Different factors which influence on particular size and encapsulation efficiency (EE) were investigated. Their EE to BSA could reach 97.8% at an available condition. In vitro release behavior of NPs showed a continuous release after a burst release. The stability maintenance of BSA in the nanoparticle release in vitro was also measured via circular dichroism and fluorescence spectrometry. The results showed that the copolymer nanoparticles have a promising potential in protein delivery system. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010