Structural morphology and properties of star styrene–isoprene–butadiene rubber and natural rubber/star styrene–butadiene rubber blends

Star styrene–isoprene–butadiene rubber (SIBR) was synthesized with a new kind of star anionic initiator made from naphthalene lithium and an SnCl₄ coupled agent. The relationship between the structure and properties of star SIBR was studied. Star block styrene–isoprene–butadiene rubber (SB‐SIBR), having low hysteresis, high road‐hugging, and excellent mechanical properties, was closer to meeting the overall performance requirements of ideal tire‐tread rubber according to a comparison of the morphology and various properties of SB‐SIBR with those of star random SIBR and natural rubber/star styrene–butadiene rubber blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 336–341, 2004     

Strain‐induced crystallization behavior of natural rubber and trans‐1,4‐polyisoprene crosslinked blends

The strain‐induced crystallization (SIC) behaviors of crosslinked blends based on natural rubber (NR) and trans‐1,4‐polyisoprene (TPI) with different content of TPI were probed explored by using synchrotron two‐dimensional wide angle X‐ray diffraction and dynamic mechanical analysis. The results showed that when TPI content is less than 70% no reflection peak of TPI but NR crystallite diffractions can be observed and the diffractions of TPI βform appear when TPI content is 70 wt % in the cocured blend. SIC of cocured blends started at smaller strain ratio than the pure NR. By calculating ΔS_def, it is found that the drop in entropy upon strain decreased when TPI is incorporated into NR due to the reduction of molecular mobility of NR. The degree of SIC and crystallization rate index in crosslinked blends monotonously decreased with the increase of TPI content. The apparent crystallite size exhibited some surprising variations. L₂₀₀ and L₁₂₀ decreased with the increase of TPI content in the cocured blends. These observations were usually caused by two factors: (i) Less number of polymer chains could involve in crystal growth due to the lower mobility of polymer chains in the cocured blends which is proved by dynamic mechanical analysis results; (ii) The mean distance between nuclei decreases, which was caused by the fluctuation of crosslink density in NR phase derived from the heterogeneous distribution of curatives in two phases supported by the varying tendency of curing degree and crosslink density. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Morphology and mechanical properties of clay/styrene‐butadiene rubber nanocomposites

Based on the character of a clay that could be separated into many 1‐nm thickness monolayers, clay styrene‐butadiene rubber (SBR) nanocomposites were acquired by mixing the SBR latex with a clay/water dispersion and coagulating the mixture. The structure of the dispersion of clay in the SBR was studied through TEM. The mechanical properties of clay/SBR nanocomposites with different filling amounts of clay were studied. The results showed that the main structure of the dispersion of clay in the SBR was a layer bundle whose thickness was 4–10 nm and its aggregation formed by several or many layer bundles. Compared with the other filler, some mechanical properties of clay/SBR nanocomposites exceeded those of carbon black/SBR composites and they were higher than those of clay/SBR composites produced by directly mixing clay with SBR through regular rubber processing means. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1873–1878, 2000     

Some considerations concerning the dynamic mechanical properties of cured styrene–butadiene rubber/polybutadiene blends

The dynamic mechanical response of several binary mixtures of a styrene–butadiene copolymer and high cis‐polybutadiene has been studied. The loss tangent and shear modulus were measured with a free damping torsion pendulum at temperatures between 143 and 343 K in argon atmosphere. From the loss tangent data the glass transition temperature of each sample was evaluated. The results can be represented by the Fox equation that relates the glass transition temperature of the blend with that of constituent polymers. The influence in the loss tangent data of the crystallization of the high cis BR used in the blend is discussed. A study of the separation of the crystalline and amorphous parts in the polybutadiene using the storage modulus data is presented. Finally, the loss of crystallinity at different contents of SBR in the blend is analysed using the dynamic mechanical data. © 2000 Society of Chemical Industry     

Influences of trans‐polyoctylene rubber on the physical properties and phase morphology of natural rubber/acrylonitrile–butadiene rubber blends

The influence of trans‐polyoctylene rubber (TOR) on the mechanical properties, glass‐transition behavior, and phase morphology of natural rubber (NR)/acrylonitrile–butadiene rubber (NBR) blends was investigated. With an increased TOR level, hardness, tensile modulus, and resilience increased, whereas tensile strength and elongation at break tremendously decreased. According to differential scanning calorimetry and dynamic mechanical analysis, there were two distinct glass‐transition temperatures for a 50/50 NR/NBR blend, indicating the strongly incompatible nature of the blend. When the TOR level was increased, the glass transition of NBR was strongly suppressed. NBR droplets of a few micrometers were uniformly dispersed in the continuous NR phases in the NR/NBR blends. When TOR was added to a 50/50 NR/NBR blend, TOR tended to be located in the NR phase and in some cases was positioned at the interfaces between the NBR and NR phases. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 125–134, 2002     

Performance of form-stable myristic acid/polymethyl methacrylate composite phase-change material coated with nitrile butadiene rubber/polyacrylic acid layered coatings

The aim of this work is to determine the effect of coating and blending composition of myristic acid (MA) with polymethyl methacrylate (PMMA) on the latent heat and thermal stability of phase change material (PCM). Form-stable PCM (FSPCM) was prepared by blending MA with PMMA and then coating with nitrile butadiene rubber (NBR) and polyacrylic acid (PA) layers. This is the first attempt to coat the PCM with elastomeric latex. Leakage test results showed that addition of 20 wt% PMMA to the MA and NBR-PA coating layers could eliminate leakage in sample PCM8O. Tensile test results showed that NBR-PA coating material provide sufficient strength and elasticity to hold the PCM during the phase change process. Latent heat of melting and freezing of the form stable PCM80 is 107.56 J/g and 102.26 J/g, which is comparable with other results in the literature. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48642.     

Styrene–butadiene rubber/natural rubber blends: Morphology,transport behavior,and dynamic mechanical and mechanical properties

Blends of styrene–butadiene rubber (SBR) and natural rubber (NR) were prepared and their morphology, transport behavior, and dynamic mechanical and mechanical properties were studied. The transport behavior of SBR/NR blends was examined in an atmosphere of n‐alkanes in the temperature range of 25–60°C. Transport parameters such as diffusivity, sorptivity, and permeability were estimated. Network characterization was done using phantom and affine models. The effect of the blend ratio on the dynamic mechanical properties of SBR/NR blends was investigated at different temperatures. The storage modulus of the blend decreased with increase of the temperature. Attempts were made to correlate the properties with the morphology of the blend. To understand the stability of the membranes, mechanical testing was carried out for unswollen, swollen, and deswollen samples. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1280–1303, 2000     

Dynamic mechanical properties of styrene‐butadiene rubber vulcanizate filled with electron beam modified surface‐treated dual‐phase filler

The influence of the electron beam modification of a dual‐phase filler on the dynamic mechanical properties of styrene‐butadiene rubber (SBR) is investigated in the presence and absence of trimethylol propane triacrylate or triethoxysilylpropyltetrasulfide. Electron beam modification of the filler results in reduction of the tan δ at 70°C, a parameter for rolling resistance, and an increase in the tan δ at 0°C, a parameter for wet skid resistance of SBR vulcanizates. These modified fillers give significantly better overall performance in comparison with the control dual‐phase filler. This variation in properties is explained in terms of filler parameters such as the filler structure that leads to rubber occlusion and filler networking. These results are further corroborated using the master curves obtained by the time–temperature superposition principle. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2992–3004, 2003     

Kinetics of sulfur vulcanization of 1,4‐cis‐polyisoprene by differential scanning calorimetry

The vulcanization of 1,4‐cis‐polyisoprene was studied by differential scanning calorimetry under isothermal and nonisothermal conditions. On the basis of thermal characteristics obtained, the kinetic parameters of crosslinking (the induction period, maximum rate, and effective energy of activation) were determined. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 754–757, 2007     

Rheological,mechanical and morphological properties of thermoplastic vulcanizates based on high impact polystyrene and styrene‐butadiene rubber

Thermoplastic vulcanizates (TPVs) based on high impact polystyrene (HIPS)/styrene‐butadiene rubber (SBR) blends were prepared by dynamic vulcanization technique. The rheological, mechanical and morphological properties of the dynamically vulcanized blends were investigated systematically. As determined by capillary rheometer, the apparent viscosity of the blends decreases as the shear rate increases, indicating obvious pseudoplastic behavior. At low shear rate, the apparent viscosity of these blends is considerably higher than that of neat HIPS and decreases with the increase of HIPS concentration. The increase of HIPS content in the dynamically vulcanized blends contributes to the increase of tensile strength and hardness properties, while elongation at break and tensile set at break reach a maximum at 30 and 50 wt % of the HIPS content, respectively. The etched surfaces of the HIPS/SBR TPVs were investigated using field‐emission scanning electron microscopy, the morphological study reveals continuous HIPS phase and finely dispersed SBR elastomeric phase in the TPVs. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Evaluation of the properties of bitumen modified by SBS copolymers with different styrene–butadiene structure

Four styrene–butadiene–styrene(SBS) modified bitumens had been prepared by a base bitumen, a crosslinking agent and four SBS copolymers which differ in styrene blocks content and molecular configuration (radial or linear) under the same experimental conditions. Conventional properties, morphology, thermal behavior and microstructure were investigated by means of conventional tests, fluorescence microscopy, differential scanning calorimetry (DSC), and Fourier transform infrared (FT‐IR) spectroscopy. In terms of linear SBS polymers, the SBS molecule with the styrene content of 30% has a perfect dispersion and complete stretching in bitumen matrix, and in this case, the conventional properties and thermal stability of bitumen are enhanced substantially. However, the star SBS polymer due to long branched chains forming the preferable steric hindrance to enhance the intensity of base bitumen, plays a more important role in improving the conventional properties of base bitumen than linear SBS polymers. Furthermore, the FT‐IR spectra indicate that, the main bands assignations of four modified bitumens are identical and the significant variation is the peak intensity. And a noncomplete crosslinking reaction happens between the bitumen and each SBS polymer, which can efficiently prevent excessive cross‐linking from affecting the intrinsic bitumen characteristics. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40398.     

Thermal properties and morphology of isotactic polypropylene/acrylonitrile–butadiene rubber blends in the presence and absence of a nanoclay

A thermoplastic elastomer (TPE) nanocomposite based on polypropylene (PP), acrylonitrile–butadiene rubber (NBR), and a nanoclay (NC) was prepared in a laboratory mixer with a 54/40/6 weight ratio. The effects of NC on the thermal properties, crystalline structure, and phase morphology of the TPE nanocomposite were studied in this work. The results obtained from the nonisothermal crystallization of PP, PP/NBR, and PP/NBR/NC, which was carried out with differential scanning calorimetry, revealed that the overall rate of crystallization of PP decreased with the addition of NBR to PP and increased when NC was incorporated into the nanocomposite. In addition, the crystallite size distribution was more uniform for the PP phase crystallized in the nanocomposite versus the PP itself. Also, although the PP in the reference blend (PP/NBR) crystallized only in the α form, the crystalline structure of the PP incorporated into the nanocomposite was a mixture of α‐ and γ‐crystalline forms. The effects of NC on the phase morphology of PP/NBR blends prepared with three different cooling methods (quenching in liquid nitrogen, cooling between two metal plates at room temperature, and molding at a high temperature in a hot press) were studied. For the samples quenched in liquid nitrogen or cooled between metal plates, a particulate–cocontinuous morphology formed. However, for the samples prepared under a hot press, a laminar‐like morphology was observed. In all three cases, a similar particulate–cocontinuous morphology formed for the reference blend, but the rubber inclusions were always smaller than those of the TPE nanocomposite. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Morphology and nonisothermal crystallization of a polyacetal/poly(ε‐caprolactone) reactive blend prepared via a chain‐transfer reaction

A polyacetal (POM)/poly(ε‐caprolactone) (PCL) reactive blend prepared via a chain‐transfer reaction was investigated with respect to its morphology and nonisothermal crystallization, and the results were compared with those of a simple POM/PCL blend. The reactive blend had a microscopically phase‐separated morphology in which the diameter of the PCL microphase was below 100 nm, and it clearly yielded ring‐banded spherulites, whereas between the two blends, there were no significant differences in the diameters and polygonal edges of the spherulites and in the long period of the POM phases. The PCL part of the reactive blend crystallized within the confined microspace with about 10% lower crystallinity than that of the corresponding simple blend. A lower Avrami exponent and crystallization rate parameter of the PCL part were observed in the primary crystallization process of the reactive blend. In contrast, the crystallinity of the POM component and the nonisothermal crystallization kinetic parameters of the POM part showed no noticeable differences between the two blends at any given cooling rate. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of 1,3,5‐trialkyl‐benzenetricarboxylamide on the crystallization of poly(lactic acid)

A series of 1,3,5‐trialkyl‐benzenetricarboxylamides (BTA‐Rs) with different side‐chain lengths of n‐alkyl are synthesized to use as nucleating agents of poly (lactic acid) (PLA). Crystallization rate of PLA is detailed discussed in nonisothermal melt‐crystallization with addition of the synthesized nucleating agents. Among these BTA‐Rs, BTA‐n‐butyl (BTA‐nBu) shows the most excellent nucleation ability for PLA. The influences of BTA‐nBu on the nonisothermal melt‐crystallization and cold‐crystallization from the glassy state, isothermal crystallization, crystalline structure, and spherulite morphology of PLA are investigated. It is found that 0.8 wt % is the optimal weight fraction of BTA‐nBu to improve the crystallization of PLA. In the case of isothermal melt‐crystallization from melt, the addition of BTA‐nBu shortens the crystallization half‐time and speeds up the crystallization rate of PLA with no discernible effect on the crystalline structure. Besides, BTA‐nBu nucleated PLA exhibits smaller spherulites size and larger nucleation density than that of pure PLA. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1328‐1336, 2013     

Crystallization and melting behavior of trans‐1,2‐syndiotactic polypentadiene

(E)‐1,3‐pentadiene was polymerized at ?30°C by using the catalyst system CoCl₂(PⁱPrPh₂)²–MAO. A trans‐1,2‐syndiotactic structure was attributed to the semicrystalline polymer obtained on the basis of the characterization carried out by FTIR, NMR, and WAXD techniques. The thermal behavior of the polypentadiene was investigated by thermogravimetry and differential scanning calorimetry. Isothermal melt crystallization kinetics were analyzed according to the Avrami equation. Nonisothermal crystallization kinetics were elaborated by using Ziabicki and Avrami methods modified by Jeziorny. The equilibrium melting temperature was calculated. The thermal behavior of trans‐1,2‐syndiotactic polypentadiene was compared with that of 1,2‐syndiotactic polybutadiene. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1970–1976, 2005     

Morphology and dynamic mechanical properties of natural rubber/nitrile rubber blends containing trans‐polyoctylene rubber as a compatibilizer

The use of trans‐polyoctylene rubber (TOR) as a compatibilizer for blends of natural rubber (NR) and acrylonitrile‐butadiene rubber (NBR) was investigated using atomic force microscopy (AFM) and dynamic mechanical analysis (DMA). The NR/NBR blends containing varying proportions of TOR were prepared in an internal mixer. AFM micrographs of NR/NBR blend at 50/50 (w/w) composition showed heterogeneous phase morphology with NR as a matrix and NBR as a dispersed phase. Inclusion of TOR in the NR/NBR blend altered the phase morphology by reducing the size of the NBR phase. DMA of NR/NBR/TOR showed reduction in tan δ peak height of NBR and an increase in storage modulus E′ in the rubbery region for the NR/NBR blends. A comparison of the E′ obtained from experimental data with that from theoretical models was made to deduce the location of TOR in the blend. Based on the fittings of calculated and experimental values of E′, it was inferred that TOR was incorporated into the NR phase at lower proportion as well as at the interfacial region at higher proportion. The Cole–Cole plot illustrated the compatibilizing effect of TOR. Copyright © 2004 Society of Chemical Industry     

Effect of poly(propylene carbonate) on the crystallization and melting behavior of poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate)

The crystallization and melting behavior of poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate) (PHBV) and a 30/70 (w/w) PHBV/poly(propylene carbonate) (PPC) blend was investigated with differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR). The transesterification reaction between PHBV and PPC was detected in the melt‐blending process. The interaction between the two macromolecules was confirmed by means of FTIR analysis. During the crystallization process from the melt, the crystallization temperature of the PHBV/PPC blend decreased about 8°C, the melting temperature was depressed by 4°C, and the degree of crystallinity of PHBV in the blend decreased about 9.4%; this was calculated through a comparison of the DSC heating traces for the blend and pure PHBV. These results indicated that imperfect crystals of PHBV formed, crystallization was inhibited, and the crystallization ability of PHBV was weakened in the blend. The equilibrium melting temperatures of PHBV and the 30/70 PHBV/PPC blend isothermally crystallized were 187.1 and 179°C, respectively. The isothermal crystallization kinetics were also studied. The fold surface free energy of the developing crystals of PHBV isothermally crystallized from the melt decreased; however, a depression in the relative degree of crystallization, a reduction of the linear growth rate of the spherulites, and decreases in the equilibrium melting temperature and crystallization capability of PHBV were detected with the addition of PPC. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2514–2521, 2004     

Mechanical properties and morphologies of polypropylene composites synergistically filled by styrene‐butadiene rubber and silica nanoparticles

The mechanical properties and morphologies of PP/SBR/SiO₂ nanocomposites have been studied using mechanical testing, wide‐angle X‐ray diffraction (WAXD), polarizing optical microscopy (POM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The mechanical properties of neat polypropylene can be considerably improved by synergistically filling with SiO₂ and SBR nanoparticles, especially for the notched Izod impact strength. The results from the WAXD, POM, SEM, DSC, and TGA measurements reveal that: (i) the β‐phase crystal structure of PP is formed when SiO₂ and SBR nanoparticles are synergistically filled with polypropylene and its formation plays a role for the enhancement of the impact strength for PP/SBR/SiO₂ nanocomposites; (ii) the dispersion of SiO₂ and SBR nanoparticles in PP/SBR/SiO₂ composites is homogeneous, indicating that synergistic incorporating method decreases the aggregation of nanoparticles and thus increases the sites for dissipation of shock for impact energy in PP/SBR/SiO₂ nanocomposites; (iii) the thermal analysis shows high thermal stability for the PP/SBR/SiO₂ nanocomposites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Low‐frequency sound absorption of organic hybrid comprised of chlorinated polyethylene and N,N′‐dicyclohexyl‐2‐benzothiazolyl sulfenamide

We investigated the sound absorption characteristics of an organic hybrid material comprised of chlorinated polyethylene (CPE) as the matrix polymer and N,N′‐dicyclohexyl‐2‐benzothiazolyl sulfenamide (DBS) as the second component of an organic low‐molecular‐weight compound. We found specific crystallites, obtained by annealing, that generated new absorption for a low‐frequency sound in a CPE/DBS blend. We observed two sound absorption peaks, around 300 and 1000 Hz, in the annealed CPE/DBS (50 : 50 w/w) blends, whereas those peaks were not observed in the untreated sample. There were two kinds of crystals with different melting points in the annealed samples. It was confirmed that the crystals with the lower melting point brought about sound absorption at a low frequency. The crystals that had the lower melting point were smaller and/or more disordered than the crystals that had the higher melting point. We calculated the fraction of these two types of crystals from differential scanning calorimetry and wide‐angle X‐ray diffraction measurements. The annealing or reannealing temperature specified the fraction of the crystal with the lower melting point, and the obtained crystal fraction characterized sound absorption frequency. Therefore, it is possible to control the sound absorption frequency of an organic hybrid by heat treatment such as annealing. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

A study about the structure of vulcanized natural rubber/styrene butadiene rubber blends and the glass transition behavior

A study of the thermal behavior of cured elastomeric blends of natural rubber (NR) and styrene butadiene rubber (SBR) prepared by solution blending in toluene is presented. Binary blends with different compositions of NR/SBR were produced using a conventional cure system based on sulfur and TBBS (n-t-butyl-2-benzothiazole sulfonamide as accelerator. The compounds were vulcanized at 433 K up to an optimum time of cure determined by rheometric tests. From swelling tests, the crosslink densities of the compounds were obtained and compared with those obtained in similar blends prepared by mechanical mixing. The results were analyzed in terms of the disentangling of the chain structures of the SBR and NR phases and the achieved cure state of the blend. Using differential scanning calorimetry, the glass transition temperature T_g of each blend was measured. In most compounds, the value of T_g corresponding to each phase of the blend was determined, but in some blends a single value of T_g was obtained. The variation of T_g with the composition and cure level in each phase was analyzed. On the other hand, a physical mixture of two equal parts of NR and SBR vulcanized was measured and the results were compared to those of the NR50/SBR50 cured blend. Besides, to analyze the influence of the network structure, pure NR and SBR unvulcanized samples were measured. On the basis of all the obtained results, the influence of the interphase formed in the blend between SBR and NR phases is discussed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012