New epoxy thermosets modified with amphiphilic multiarm star polymers as toughness enhancer

The synthesis and characterization of two novel amphiphilic multiarm star polymers with linear polyethylene glycol (PEG) and poly(ε-caprolactone) (PCL) arms and their use as toughening modifiers of epoxy anhydride thermosets are reported. The new star polymers were obtained by partial pegylation of a hyperbranched polyester and subsequent growth of PCL arms. The curing process was studied by calorimetry and thermomechanical analysis, demonstrating the accelerating effect and the influence on gelation of the hydroxyl terminal groups. The curing kinetics was analyzed by model-free and model-fitting methods. The final properties of the resulting materials were determined by thermal and mechanical tests. The addition of the star-like modifiers led only to notable improvement on impact strength in the material containing a 10% of the star with PCL and PEG arms, without compromising glass transition temperature and thermal stability. The morphology of the resulting materials depended on the structure of the toughness modifier used, as demonstrated by electron microscopy, but all modified thermosets obtained showed phase-separated morphologies with nanosized particles.     

The use of multiarm star‐like polymers in the preparation of epoxy thermosets by UV‐cationic photopolymerization. Effect of the arms of the star in the curing process and in the final properties and morphology

New epoxy thermosets have been prepared via cationic UV‐photopolymerization introducing two different multiarm star‐like polymers. Both stars have a poly(glycidol) core but one has poly(methylmetacrylate) arms and the other poly(ε?caprolactone) ones. The characterization of the curing process has been performed by Real‐Time FTIR and photo‐DSC, observing a slight reduction in the curing rate on increasing the proportion of star. The thermosets prepared were characterized by gel content determination, DMTA and TGA, and finally the morphology observed by FE‐SEM, demonstrating the formation of nanophases in the case of the star with poly(ε?caprolactone) arms. POLYM. ENG. SCI., 54:17–23, 2014. © 2013 Society of Plastics Engineers     

Thermal and mechanical properties of semi‐interpenetrating polymer networks composed of diisocyanate‐bridged,four‐armed,star‐shaped ε‐caprolactone oligomers and poly(ε‐caprolactone)

Semi‐interpenetrating polymer networks (S‐IPNs) were prepared by the reactions of hydroxyl‐terminated four‐armed, star‐shaped ε‐caprolactone oligomers with degrees of polymerization per one oligocaprolactone chain (ns) of 3, 5, and 10 and 2,4‐tolylene diisocyanate (TDI) in the presence of poly(ε‐caprolactone) (PCL). In the dynamic mechanical analysis of the S‐IPN [2,4‐tolylene diisocyanate bridged hydroxyl‐terminated four‐armed, star‐shaped ε‐caprolactone oligomer (TH4CLO)/PCL], only one tan δ peak was observed; its temperature increased with increasing TH4CLO content and with decreasing n value. Differential scanning calorimetric analyses of the TH4CLOs and TH4CLO/PCLs revealed that the TH4CLOs with ns of 3 and 5 were amorphous, whereas TH4CLO with an n of 10 was semicrystalline and that the crystallization of the PCL chain for TH4CLO/PCLs was more strongly disturbed with increasing TH4CLO content and decreasing n value. Although the tensile strength, modulus, and elongation at break of TH4CLO were much lower than those of PCL, those values increased with the n value. Although the tensile strength and modulus of the TH4CLO/PCLs decreased with increasing TH4CLO content, TH4CLO (n = 3)/PCL 50/50 showed the highest elongation at break (314%) among the S‐IPNs because of the suppression of crystallization of the polycaprolactone chain. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4229–4236, 2013     

Multiarm hyperbranched polyester‐b‐Poly(ε‐caprolactone):Plasticization effect and migration resistance for PVC

A series of multiarm structure hyperbranched polyester‐b‐poly(ε‐caprolactone) (HEPCLs) with different lengths of poly(ε‐caprolactone) (PCL) segments (s = 3, 6, 7, 8) were synthesized. Hyperbranched polyester (HE) was synthesized from glycidol and succinic anhydride and used as a macromolecular polymerization initiator for ε‐caprolactone. The HEPCLs were used as polyvinyl chloride (PVC) plasticizers and the mechanical properties, thermal properties, morphology, and migration stabilities of PVC films were explored. The plasticizing efficiency increased with the increase in PCL segments, and the plasticizing efficiency of HEPCL₈ exceeded that of dioctyl phthalate. Scanning electron microscopy and solid‐state ¹H NMR showed that the HEPCLs possess better compatibility with PVC than HE. Moreover, HEPCLs exhibited excellent migration stability even at very harsh condition, indicating that HEPCLs can be used as no‐migration PVC plasticizers in medical products, children's toys, and food packaging. J. VINYL ADDIT. TECHNOL., 26:35–42, 2020. © 2019 Society of Plastics Engineers     

Non‐covalent interactions of pyrene end‐labeled star poly(ɛ‐caprolactone)s with fullerene

Pyrene end‐labeled star poly(?‐caprolactone)s (PCLs) with polyhedral oligomeric silsesquioxane (POSS) core were prepared by combination of copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) click chemistry and ring‐opening polymerization techniques. First, ?‐caprolactone (?‐CL) is polymerized by using 1‐pyrene methanol as initiator and stannous octoate as catalyst to obtain α‐pyrene‐ω‐hydroxyl telechelic PCL with different chain lengths. Then, its hydroxyl group is converted to acetylene functionality by esterification reaction with propargyl chloroformate. Finally, the CuAAC click reaction of α‐pyrene‐ω‐acetylene telechelic PCL with POSS‐(N₃)₈ leads to corresponding pyrene end‐labeled star‐shaped PCLs. The successful synthesis of pyrene end‐labeled star polymers is clearly confirmed by ¹H‐nuclear magnetic resonance, Fourier transform infrared, gel permeation chromatograph, differential scanning calorimeter, and thermogravimetric analysis. Furthermore, non‐covalent interactions of obtained star polymers with fullerene are investigated in liquid media. Based on Raman spectroscopy and visual investigations, the star polymer having shorter chain length exhibited better and more stable dispersion with fullerene. The amount of pyrene units present per polymer chains can directly influence the dispersion stability of fullerene. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46520.     

Synthesis of star‐shaped poly(ϵ‐caprolactone) by samarium‐based tetrafunctional initiator and its dilute‐solution properties

An in situ–generated tetrafunctional samarium enolate from the reduction of 1,1,1,1‐tetra(2‐bromoisobutyryloxymethyl)methane with divalent samarium complexes [Sm(PPh₂)₂ and SmI₂] in tetrahydrofuran has proven to initiate the ring‐opening polymerization of ?‐caprolactone (CL) giving star‐shaped aliphatic polyesters. The polymerization proceeded with quantitative conversions at room temperature in 2 h and exhibited good controllability of the molecular weight of polymer. The resulting four‐armed poly(?‐caprolactone) (PCL) was fractionated, and the dilute‐solution properties of the fractions were studied in tetrahydrofuran and toluene at 30°C. The Mark–Houwink relations for these solvents were [η] = 2.73 × 10^?2M_w^0.74 and [η] = 1.97 × 10^?2M_w^0.75, respectively. In addition, the unperturbed dimensions of the star‐shaped PCL systems were also evaluated, and a significant solvent effect was observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 175–182, 2006     

Toughening of epoxy thermosets with polystyrene‐block‐polybutadiene‐block‐ polystyrene triblock copolymer via formation of nanostructures

In this contribution, we reported to utilize polystyrene‐block‐polybutadiene‐block‐polystyrene (PS‐b‐PB‐b‐PS), a commercial triblock copolymer to toughen epoxy thermosets. First, a PS‐b‐PB‐b‐PS triblock copolymer was chemically modified with hydroboration‐oxidation reaction, with which the midblock was hydroxylated whereas the endblocks remained unaffected. It was found that the degree of hydroxylation was well controlled. One of the hydroxylated PS‐b‐PB‐b‐PS samples was then used as the macromolecular initiator to synthesize a poly(ε‐caprolactone)‐grafted PS‐b‐PB‐b‐PS via the ring‐opening polymerization. It was found that the PS‐b‐PB‐b‐PS with poly(ε‐caprolactone) grafts can be successfully employed to nanostructure epoxy thermosets; the “core‐shell” microdomains composed of PB and PS were generated in the nanostructured thermosets. The nanostructured thermosets displayed improved fracture toughness. POLYM. ENG. SCI., 59:2387–2396, 2019. © 2019 Society of Plastics Engineers     

Preparation of new dendrimer‐like star‐shaped amphiphilic poly(ethylene glycol)–poly(ϵ‐caprolactone) copolymers for biocompatible and high‐efficiency curcumin delivery

Novel amphiphilic star‐shaped terpolymers comprised of hydrophobic poly(?‐caprolactone), pH‐sensitive polyaminoester block and hydrophilic poly(ethylene glycol) (M_n = 1100, 2000 g mol^?1) were synthesized using symmetric pentaerythritol as the core initiator for ring‐opening polymerization (ROP) reaction of ?‐caprolactone functionalized with amino ester dendrimer structure at all chain ends. Subsequently, a second ROP reaction was performed by means of four‐arm star‐shaped poly(?‐caprolactone) macromer with eight ‐OH end groups as the macro‐initiator followed by the attachment of a poly(ethylene glycol) block at the end of each chain via a macromolecular coupling reaction. The molecular structures were verified using Fourier transform infrared and ¹H NMR spectroscopies and gel permeation chromatography. The terpolymers easily formed core–shell structural nanoparticles as micelles in aqueous solution which enhanced drug solubility. The hydrodynamic diameter of these agglomerates was found to be 91–104 nm, as measured using dynamic light scattering. The hydrophobic anticancer drug curcumin was loaded effectively into the polymeric micelles. The drug‐loaded nanoparticles were characterized for drug loading content, encapsulation efficiency, drug–polymer interaction and in vitro drug release profiles. Drug release studies showed an initial burst followed by a sustained release of the entrapped drug over a period of 7days at pH = 7.4 and 5.5. The release behaviours from the obtained drug‐loaded nanoparticles indicated that the rate of drug release could be effectively controlled by pH value. Altogether, these results demonstrate that the designed nanoparticles have great potential as hydrophobic drug delivery carriers for cancer therapy. © 2015 Society of Chemical Industry     

AB,BAB and (AB)3 poly(ε‐caprolactone)‐based block copolymers with functionalized poly(meth)acrylate segments

Linear and star‐shaped poly(ε‐caprolactone) (PCL) block copolymers containing poly(meth)acrylate segments with glycidyl, 2‐(trimethylsilyloxy)ethyl and tert‐butyl pendant groups were synthesized using mono‐, di‐ and trifunctional PCL macroinitiators and appropriate (meth)acrylate monomers by controlled radical polymerization. The well‐defined structures with narrow molecular weight distributions indicate the coexistence of semi‐crystalline PCL and amorphous poly(meth)acrylic phases. The hydrophobic nature of the block copolymers can be easily converted to amphiphilic, which with biodegradable and biocompatible PCL segments are promising as polymeric carriers in drug delivery systems. © 2012 Society of Chemical Industry     

Amphiphilic star‐shaped poly(ε‐caprolactone)‐block‐poly(l‐lysine) copolymers with porphyrin core: Synthesis,self‐assembly,and cell viability assay

Star‐shaped copolymers poly(ε‐caprolactone)‐bolck‐poly(ε‐benzyloxycarbonyl‐l ‐lysine) (SPPCL‐b‐PZLLs) with porphyrin core were synthesized by a sequential ring‐opening polymerization (ROP) of CL and Nε‐Benzyloxycarbonyl‐l ‐lysine N‐Carboxyanhydride. After the deprotection of benzyloxycarbonyl groups in polylysine blocks, the star‐shaped amphiphilic copolymers SPPCL‐b‐PLLs were obtained. These amphiphilic copolymers can self‐assemble into micelles or aggregates in aqueous solution. Investigation shows that the morphology of micelles/aggregates varied according to the change of pH values of media, indicating the pH‐responsive property of SPPCL‐b‐PLL copolymers. Furthermore, associated with conjugated porphyrin cores, the SPPCL‐b‐PLL copolymers micelles showed a certain degree of Photodynamic Therapy (PDT) effects on tumor cells, suggesting its potential application as carrier for hydrophobic drug with additional therapeutic ability of inherent porphyrin segments. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40097.     

Influence of semi‐crystalline poly(ε‐caprolactone) and non‐crystalline polylactide blocks on the thermal properties of polydimethylsiloxane‐based block copolymers

Poly(A)‐block‐poly(B), poly(A)‐block‐poly(B)‐block‐poly(A) and B(A)₂ block copolymers were prepared through coordinated anionic ring‐opening polymerization of ε‐caprolactone (CL) and lactic acid (LA) using hydroxy‐terminated polydimethylsiloxane (PDMS) as initiator. A wide range of well‐defined combinations of PDMS‐block‐PCL and PDMS‐block‐PLA diblock copolymers, PCL‐block‐PDMS‐block‐PCL and PLA‐block‐PDMS‐block‐PLA triblock copolymers and star‐PDMS(PCL)₂ copolymers were thus obtained. The number‐average molar masses and the structure of the synthesized block copolymers were identified using various analytical techniques. The thermal properties of these copolymers were established using differential scanning calorimetry. Considering PDMS‐block‐PCL copolymers, the results demonstrate the complex effect of polymer architecture and PCL block length on the ability of the PDMS block to crystallize or not. In the case of diblock copolymers, crystallization of PCL blocks originated from stacking of adjacent chains inducing the extension of the PDMS block that can easily crystallize. In the case of star copolymers, the same tendency as in triblock copolymers is observed, showing a limited crystallization of PDMS when the length of the PCL block increases. In the case of PDMS‐block‐PLA copolymers, melting and crystallization transitions of the PLA block are never observed. Considering the diblock copolymers, PDMS sequences have the ability to crystallize. © 2019 Society of Chemical Industry     

A comparative study of poly(l‐lactide)‐block‐poly(ϵ‐caprolactone) six‐armed star diblock copolymers and polylactide/poly(ϵ‐caprolactone) blends

This paper deals with the synthesis of a series of six‐armed star diblock copolymers based on poly(l ‐lactide) (PLLA) and poly(?‐caprolactone) (PCL) by ring‐opening polymerization using stannous octoate as catalyst and the preparation of polylactide (PLA)/PCL linear blends using a solution blending technique, while keeping the PLA‐to‐PCL ratio comparable in both systems. The thermal, rheological and mechanical properties of the copolymers and the blends were comparatively studied. The melting point and the degree of crystallinity were found to be lower for the copolymers than the blends due to poor folding property of star copolymers. Dynamic rheology revealed that the star polymers have lower elastic modulus, storage modulus and viscosity as compared to the corresponding blends with similar composition. The blends show two‐phase dispersed morphology whereas the copolymers exhibited microphase separated morphology with elongated (worm‐like) microdomains. The crystalline structures of the copolymers were characterized by larger crystallites than their blend counterparts, as estimated using Sherrer's equation based on wide‐angle X‐ray diffraction data. © 2016 Society of Chemical Industry     

Functionalized multiarm poly(ϵ‐caprolactone)s: Synthesis,structure analysis,and network formation

The purpose of this research was to synthesize and characterize a novel class of four‐arm, star‐shape biodegradable polymers having double‐bond functionality as a precursor for free‐radical polymerization, with unsaturated monomers or macromers or photocrosslinking for network formation. The synthesis involved two basic steps. First, hydroxyl‐functionalized four‐arm poly(?‐caprolactone)s (PPCL‐OH) were synthesized by the ring‐opening polymerization of ?‐caprolactone in the presence of pentaerythritol and stannous octoate. Second, double‐bond–functionalized four‐arm poly(?‐caprolactone)s (PPCL‐Ma) were synthesized by reacting PPCL‐OH with maleic anhydride in the melt at 130°C. Quantitative conversion of hydroxyl functionality in PPCL‐OH to double‐bond functionality was achieved for low molecular weight PPCL‐OH. Both the PPCL‐OH and the PPCL‐Ma were characterized by FTIR, ¹H‐NMR, ¹³C‐NMR, SEC, and DSC. The capability of the double‐bond–functionalized four‐arm poly(?‐caprolactone)s (PPCL‐Ma) to form network structures was preliminarily shown by photocrosslinking PPCL‐Ma. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2296–2306, 2002     

Synthesis,self‐assembly,and drug release behavior of star‐shaped poly(ε‐caprolactone)‐b‐poly(ethylene oxide) block copolymer with porphyrin core

A serial of star‐shaped poly(ε‐caprolactone)‐b‐poly(ethylene oxide) (SPPCL‐b‐PEO) block copolymers with porphyrin core were successfully synthesized from ring‐opening polymerization (ROP) of ε‐caprolactone (CL) initiated with porphyrin core, followed by coupling reaction with a hydrophilic polymer poly(ethylene oxide) (PEO) shell. The structure of this novel copolymer were synthesized and thoroughly characterized by Nuclear Magnetic Resonance (NMR), Gel Permeation Chromatography (GPC), Fourier Transform Infrared Spectroscopy (FTIR). Notably, the as‐prepared porphyrin‐cored star‐shaped copolymer could self‐assembly into different structures determined by transmission electron microscopy (TEM) and dynamic lighting scattering (DLS), which provides the great potential of using this well‐defined photodynamic therapy material for drug delivery system. Particularly, the doxorubicin‐loaded SPPCL‐b‐PEO nanosphere exhibits property of pH‐induced drug release. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40996.     

Elaboration of Poly(ε‐caprolactone)‐g‐TiNbO5 Nanocomposites via in situ Metal Complex Initiated Intercalative Polymerization

Summary: The preparation of poly(ε‐caprolactone)‐g‐TiNbO₅ nanocomposites via in situ intercalative polymerization of ε‐caprolactone initiated by an aluminium complex is described. These nanocomposites were obtained in the presence of HTiNbO₅ mineral pre‐treated by AlMe₃, but non‐modified by tetraalkylammonium cations. These hybrid materials obtained have been characterized by Fourier transform infrared absorption spectroscopy, wide‐angle X‐ray scattering, scanning electron microscopy, and dynamic mechanical analysis. Layered structure delamination and homogeneous distribution of mineral lamellae in the poly(ε‐caprolactone) (PCL) is figured out and strong improvement of the mechanical properties achieved. The storage modulus of the nanocomposites is enhanced as compared to pure PCL and increases monotonously with the amount of the filler in the range 3 to 10 wt.‐%.

SEM image of the fractured surface of a PCL‐TiNbO₅ nanocomposite film.     

Enhancement of dielectric constants of epoxy thermosets via a fine dispersion of barium titanate nanoparticles

In this study, we examined a facile approach for achieving a fine dispersion of barium titanate (BT) nanoparticles (NPs) in epoxy thermosets. First, the surfaces of BT NPs were modified with poly(ε‐caprolactone) (PCL) via a surface‐initiated ring‐opening polymerization approach. We found that the PCL‐grafted BT NPs were easily dispersed in epoxy thermosets. The fine dispersion of the PCL‐grafted BT NPs in the epoxy thermosets was evidenced by transmission electron microscopy and dynamic mechanical thermal analysis. We found that the organic–inorganic nanocomposites displayed significantly enhanced dielectric constants and low dielectric loss compared to the control epoxy. The nanocomposites containing 14.1 wt % BT NPs possessed dielectric constants as high as at a frequency of 10³ Hz. The dielectric loss was measured to be 0.002 at a frequency of 10³ Hz. The improved dielectric properties are accounted for the fine dispersion of the BT NPs in the epoxy thermosets. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43322.     

Cyclohexene oxide mid‐chain functional macromonomer of poly(ε‐caprolactone): Synthesis,characterization, and photoinitiated cationic homo‐ and copolymerization

In this study, a novel well‐defined epoxy mid‐chain functional macromonomer of poly(ε‐caprolactone) (PCL) has been synthesized by ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) and epoxidation on workup with 3‐chloroperoxybenzoic acid. The ROP of ε‐CL monomer in bulk at 110°C, by means of a dihydroxy functional initiator namely, 3‐cyclohexene‐1,1‐dimethanol in conjunction with stannous‐2‐ethylhexanoate, (Sn(Oct)₂), yielded a well‐defined PCL with a cyclohexene mid‐chain group. The epoxidation of the cyclohexene (CH) mid‐chain group of PCL was performed using 3‐chloroperoxybenzoic acid. GPC, IR, and ¹H‐NMR analyses revealed that a low‐polydispersity macromonomer of PCL with the desired cyclohexene oxide (CHO) functionality at the mid‐chain was obtained. The photoinduced cationic polymerizations of this macromonomer yielded comb‐shaped and graft copolymers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of polycyanurate networks modified by oligo(ϵ‐caprolactone) as precursors of porous thermosets

Oligo(?‐caprolactone)‐modified polycyanurate networks were synthesized by thermal polycyclotrimerization of dicyanate ester of bisphenol E in the presence of a dihydroxy‐telechelic poly(?‐caprolactone) (PCL) oligomer with varying compositions. Using FTIR, gel fraction content and density measurements, it has been proved that the main part of the reactive modifier was chemically incorporated into the PCN network structure. According to the thermal behavior of the polymer networks as investigated by TGA, they can be divided into two groups. The first group of systems with low modifier content (i.e., up to 20 wt %) is characterized by one stage of decomposition under nitrogen, and two stages under oxygen. A second group of systems with higher modifier content is generally characterized by two stages of decomposition in nitrogen and three stages in oxygen. DSC and DMTA investigations have shown the occurrence of at least a two‐phase structure in all the samples. The PCN/PCL‐based hybrid networks can be effectively used as precursors for the generation of porous PCN thermosets, as evidenced by FTIR and SEM. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Blends of poly(d,l‐lactide) with polyhedral oligomeric silsesquioxanes‐based biodegradable polyester: Synthesis,morphology, miscibility,and mechanical property

A highly branched hybrid copolymer based on polyhedral oligomeric silsesquioxane (POSS) was designed to improve the brittleness of poly(d,l‐lactide) (PDLLA). The toughening material was synthesized using POSS‐OH as the core, which initiated the ring‐opening polymerization of ε‐caprolactone and d,l‐lactide sequentially to form the highly branched POSS‐g‐poly (ε‐caprolactone)‐b‐poly(d,l‐lactide) (POSS‐g‐PCL‐b‐PLA) copolymer with eight PCL‐b‐PLA arms. The POSS‐g‐PCL‐b‐PLA copolymer had a very good dispersion in the PDLLA matrix with the size of microdomains smaller than 1 µm when added at a low content below 10 wt %. In related to the nano‐scale size of microdomains in the blends, the crystallinity of PCL blocks was significantly suppressed. Thus, the addition of POSS‐g‐PCL‐b‐PLA is very effective to improve the roughness of the matrix polymer when added at a low content. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40776.     

In Situ Preparation of a Compatibilized Poly(cis‐1,4‐butadiene)/Poly(ε‐caprolactone) Blend

The ternary Ziegler‐Natta‐type catalyst system based on neodymium versatate (NdV), diisobutylaluminium hydride (DIBAH) and ethylaluminium sesquichloride (EASC) was used for the in situ preparation of a compatibilized blend consisting of poly(cis‐1,4‐butadiene) (BR = butadiene rubber) and poly(ε‐caprolactone) (PCL). Poly(cis‐1,4‐butadiene)‐block‐poly(ε‐caprolactone) which acts as compatibilizer for the two immiscible polymers BR and PCL was obtained by a two step sequential polymerization with the preparation of a living cis‐1,4‐BR building block in the first stage and the subsequent polymerization of CL during the second stage. This preparation method resulted in a polymer blend comprising the homopolymers BR and PCL as well as the block copolymer BR‐block‐PCL. For detailed characterization the block copolymer was separated from the respective homopolymers BR and PCL by means of fractionation with the binary solvent mixture dimethylformamide/methylcyclohexane (DMF/MCH) which mixes well at elevated temperature and exhibits phase separation at ambient temperature. ¹H NMR, IR, SEC and TEM were used for characterization of the block copolymer.

TEM of BR‐block‐PCL.