共查询到20条相似文献,搜索用时 118 毫秒
1.
2.
方志良 《稀有金属与硬质合金》1980,(3)
钼是钢、铸铁和合金的一种非常重要的添加剂,其用量越来越大.此外.钼是一种难熔金属,作为新的核和空间时代的金属之一,占有突出的地位。钼在化学工业中日益显示出它的重要作用,曾广泛地被 相似文献
3.
4.
5.
6.
7.
钼及钼合金是发展现代科技不可缺少的重要材料之一,在当前社会发展和科技进步中发挥了重要作用。本文简要介绍钼及几类主要的钼合金制品的性能、制备方法以及应用领域。 相似文献
8.
本文叙述了钼粉制取工艺,钼的物理性质、化学性质以及钼的分类和用途。钼酸铵为原料在500~600℃焙烧其产物为黄色 MoO_3,然后在 H_2气中进行一次还原,温度为450~650℃生成褐色 MoO_2,再在 H_2气中进行二次还原,还原温度为850~950℃,生成灰色钼粉。钼是体心立方结构,熔点2625℃,热导率137W/(m·K),密度10.23g/cm~3,电阻率5.7μΩ·cm。钼不与氢起反应,它和碳和含碳气体作用生成碳化物。钼与硅作用生成 MoSi_2。钼在500~600℃时可在纯氧中燃烧。盐酸、氢氟酸、稀硝酸以及碱液对钼不起作用。钼粉按化戍份分为 FMo-1,FMo-2两种,按粒度大小分为粗、中、细、超细四种。钼粉为钼丝、钼板、钼棒、钼异形制品、硅化钼发热体、玻璃窑炉鼓泡管、钼合金顶头、二硫化钼润滑剂和润滑添加剂、喷涂用钼等的原料。 相似文献
9.
对原生钼产品的生产厂家来说,1986年这一年是由“足够变成太多”,这实际上已在市场中产生了影响。因此,在供应和需求之间达到了一种脆弱的平衡,库存量稳定和价格上升已趋近于重新制订生产的厂家价格的水平。 相似文献
11.
为了降低高速钢电渣重熔的电耗,通过采用两种不同电阻率的渣系进行电渣重熔W6MoSCr4V2实验,研究了渣系对W6MoSCr4V2的质量和重熔电耗的影响。结果证明:采用高电阻率的渣系,可以降低电耗、提高生产率和产品质量。 相似文献
12.
采用 ICP-AES法测定生铁中Cu、Cr、As、Mo、V、W、Sb、Zn、Ni、Sn 10种微量元素,提出对分析条件进行试验与探讨。实验结果表明。该法具有灵敏度高,准确度好,简便快速等优点。 相似文献
13.
《钢铁研究学报(英文版)》2016,(10):1096-1103
Phase stability,elastic properties,thermo-physical properties,as well as electronic properties of hexa-(Mo,Cr,W)2C carbides were investigated by first-principles calculations.The results indicated that the Mo_8C_4,Mo_7Cr_1C_4,Mo_7W_1C_4,Mo_6W_2C_4,and Mo_6W_1Cr_1C_4 are stable and the stability follows the sequence:Mo_6W_1Cr_1C_4Mo_7W_1C_4Mo_7Cr_1C_4 Mo_6W_2C_4 Mo_8C_4.Mo_6W_1Cr_1C_4 shows the highest stability,deformation resistance and hardness.G/B(shear modulus/bulk modulus)and Poisson′s ratio of the stable hexa-(Mo,Cr,W)_2C are all larger than 1.75 and 0.26,respectively,which indicates that they are all brittle.The anisotropies are mainly due to the different Vogit shear modulus/Reuss shear modulus;the mechanical anisotropy of Mo_7Cr_1C_4 is the largest,and that of Mo_8C_4 is the smallest.Moreover,the obtained Debye temperatureΘDand heat capacity Cpindicate that Mo_6W_2C_4 possesses the best thermal conductivity(Θ_D=497.72K),while Mo_7Cr_1C_4 and Mo_6W_2C_4possess the largest heat capacity when the temperature is in the range of 0-10 Kand larger than 10 K,respectively.From the electronic property analysis,the doped Cr and W atoms can not only participate in orbitals hybridization themselves but also enhance the orbitals hybridization between Mo and C atoms,which can reinforce the interatomic interactions. 相似文献
14.
Ermittlung der Solidustemperatur und Erstellung von Zeit-Temperatur-Aufschmelz-(ZTAS-)Schaubildern zur Kennzeichnung der Grenzen für den Beginn des Eckigwerdens der Carbide, das Auftreten von Anschmelzungen sowie für die Neubildung von Eutektikum beim Austenitisieren der Schnellarbeitsstähle S18-1-2-5 mit rd. 0,82% C, 5% Co, 4% Cr, 1% Mo, 2% V und 18% W, S6-5-2 mit rd. 0,85% C, 4% Cr, 5% Mo, 2% V und 6% W, S 6-5-2-5 mit rd. 0,85% C, 5% Co, 4% Cr, 5% Mo, 2% V und 6% W, SC 6-5-2 mit rd. 1% C, 4% Cr, 5% Mo, 2% V und 6% W sowie S10-4-3-10 mit rd. 1,3% C, 10% Co, 4% Cr, 4% Mo, 3% V und 10% W. Zusammenhang zwischen Solidustemperatur und empfohlenem Härtetemperaturbereich sowie zwischen den Austenitisierungs-bedingungen und der Austenitkorngröße. Erstellung von Zeit-Temperatur-Korngrößenschaubildern. 相似文献
15.
内蒙古自治区兴和县曹四夭钼矿床,是新近发现并探明的我国又一超大型钼矿床。赋矿地层为中太古界集宁岩群黄土窑岩组,岩性为一套片麻岩类及浅粒岩类;矿床成矿母岩为中生代燕山期白垩纪花岗斑岩微型岩株,其SiO2含量达76.35%,为强酸性岩石,具高钾高碱性质;稀土特征为重稀土散失,轻稀土富集,强负铕异常。花岗斑岩SHRIMP法U-Pb同位素等时线年龄为(137±12)Ma,属早白垩纪。矿区1∶5万水系沉积物与成矿有关的乙-甲1-W、Mo、Bi、Au、Sn、As、Sb综合异常,1∶1万土壤1-甲1、3-甲1两个多金属异常与其相套合,多金属组合亦相似,为良好的找矿标志。主要工业矿体呈大型透镜体,为巨厚块体,矿体结构简单,与深部花岗斑岩体顶面起伏形态为"整合"关系。矿床成因类型为斑岩型钼矿床;除地球化学特征外,成矿母岩体及矿化蚀变带亦是矿产勘查工作中的重要找矿标志。 相似文献
16.
17.
对富钼液中钨钼的回收进行了研究。用离子交换法回收钨钼,吸附率可达95%以上,用10%的NaOH解吸,解吸效果好,解吸液用钙盐沉淀法回收,回收率在99%以上。 相似文献
18.
Interface characterization of duplex metal-coated SiC fiber-reinforced Ti-15-3 matrix composites 总被引:2,自引:0,他引:2
S. Q. Guo Y. Kagawa A. Fukushima C. Fujiwara 《Metallurgical and Materials Transactions A》1999,30(3):653-666
The interfacial reaction behavior of duplex metal (Cu/Mo and Cu/W)-coated SiC (SCS-6) fiber-reinforced Ti-15-3 composites,
before and after thermal exposure, has been studied. The effect of thermal exposure on the shear sliding resistance of these
composites was also obtained using a thin-specimen push-out test. The results are compared to those of an original SiC (SCS-6)
fiber-reinforced Ti-15-3 composite. The interfacial reaction behavior is strongly affected by the existence of a coating layer.
Both the Cu/Mo and Cu/W coating layers prevent the growth of a reaction layer. However, the coatings could not effectively
prevent diffusion of alloying elements; only the W layer exists after the thermal exposure. On the other hand, the interface
shear sliding stress minimally depends on the duplex metal coating layers prior to the thermal exposure, and this sliding
stress in both the SiC/Cu/Mo/Ti-15-3 and SiC/Cu/W/Ti-15-3 composites decreases slightly relative to that in the SiC/Ti-15-3
composite. After thermal exposure, the interface shear sliding stress increases for the SiC/Ti-15-3 composite. In distinction,
the interface shear sliding stress significantly decreases after thermal exposure in both the SiC/Cu/Mo/Ti-15-3 and SiC/Cu/W/Ti-15-3
composites. Theses behaviors are attributed to the decrease of radial clamping stress, which originates from a volume expansion
associated with the β → α phase transformation. 相似文献
19.
采用磁控共溅射方法分别制备了含有W和Mo两种不同成分的铜系薄膜,用EDX、XRD、SEM和纳米压痕仪对薄膜成份、结构、形貌和显微硬度进行了分析。结果表明,制备出的Cu—W和Cu-Mo薄膜均呈晶态结构,Cu-W和Cu—Mo形成了均匀的固溶体;经650℃热处理1h后,Cu—W和Cu—Mo薄膜中晶粒长大,有富w和富Mo相从基体Cu相中弥散析出;Cu-W薄膜的显微硬度随W成分的增加先增加后降低;Cu—Mo薄膜的显微硬度随Mo成分的增加而持续升高,薄膜退火态的显微硬度低于沉积态。分析认为,以上结果的产生均因添加W、Mo所引起的晶粒细化效应和薄膜的热稳定性较差所致。 相似文献