Synthesis and characterization of novel oligomeric poly(styrene‐co‐acrylonitrile)–clay complexes

Oligomeric poly(styrene‐co‐acrylonitrile) quaternary ammonium salts were prepared through reactions of trimethylamine with corresponding poly(styrene–acrylonitrile–vinyl benzyl chloride)s, which were synthesized by the free‐radical polymerization of a mixture of styrene, acrylonitrile, and vinyl benzyl chloride. Then, oligomeric poly(styrene‐co‐acrylonitrile)‐modified clays were prepared through the cation exchange of the sodium ions in the clay with the corresponding poly(styrene‐co‐acrylonitrile) quaternary ammonium salts. The poly(styrene–acrylonitrile–vinyl benzyl chloride)s, poly(styrene‐co‐acrylonitrile) quaternary ammonium salts, and their clay complexes were characterized with infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, proton nuclear magnetic resonance, X‐ray diffraction, and transmission electron microscopy. X‐ray diffraction and transmission electron microscopy studies showed that these novel clay complexes were well intercalated. Furthermore, thermogravimetric analysis data indicated that this series of polymerically modified clays had high enough thermal stability for nanocomposites by melt blending. The thermal treatment of one of these novel clays at 250°C under nitrogen was also conducted. Solubility and infrared studies of this thermally treated clay complex revealed that a novel polyimine/enamine structure clay complex had been formed in the gallery of the clay. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Polymericaly modified clays to preparation of polystyrene nanocomposite by nitroxide mediated radical polymerization and solution blending methods

Polymericaly modified clays that contain an oligomeric poly(styrene‐co‐chloromethyl styrene) ammonium salt have been prepared and used to preparation of polystyrene (PS) nanocomposites. First, PS and poly(styrene‐co‐chloromethyl styrene) [P(St‐co‐CMSt)] were synthesized by nitroxide mediated living free radical polymerization (NMRP) by TEMPO iniferter .Then the copolymer was coupled with N, N‐dimethyl hexadecyl amine to prepare polymeric modifier by anion exchange of chlorine group of chloromethyl styrene (CMSt) by quaternary amine. The synthesized polymeric modifier was mixed with nanoparticle of silica to change the property of clay surface from hydrophilic to hydrophobic via cation exchange of Na⁺ with alkylammonium ions. For synthesizing of nanocomposites, we used polymericaly modified montmorillonite and PS that was synthesized by NMRP technique. Intercalated nanocomposites and in some cases, exfoliated or mixed intercalated/exfoliated nanocomposites of all of these polymers have been produced by solution blending method. The prepared materials were characterized by X‐ray diffraction, Transmission electron microscopy, Fourier‐transform infrared, ¹H nuclear magnetic resonance, and gel permeation chromatography techniques. Effect of layered silicates on thermal properties and glass transition temperature of PS was investigated using TGA and DSC techniques. POLYM. COMPOS., 38:1127–1134, 2017. © 2015 Society of Plastics Engineers     

Homogeneous complex solution formed through interactions of poly(acrylamide‐co‐acrylic acid)/poly(acrylamide‐co‐dimethyldiallylammonium chloride) complex with M n+ hydration metal ions in aqueous media

A homogeneous complex solution, formed through inter‐polyelectrolyte complexation of poly(acrylamide‐co‐acrylic acid) (P(AM‐AA)) with poly(acrylamide‐co‐dimethyldiallylammonium chloride) (P(AM‐DMDAAC)) and interaction of the P(AM‐AA)/P(AM‐DMDAAC) complex with M ⁿ⁺ hydrated metal ion, was prepared and the structure and properties of the P(AM‐AA)/P(AM‐DMDAAC)/M ⁿ⁺ homogeneous complex solution were studied by UV spectrometry, dynamic light scattering and viscometry. The experimental results show that the homogeneous complex solution can be obtained by controlling the composition of the P(AM‐AA)/P(AM‐DMDAAC) complex and the M ⁿ⁺ metal ion content. Compared to the constituents, ie the P(AM‐AA) solution, the P(AM‐DMDAAC) solution and the P(AM‐AA)/P(AM‐DMDAAC) complex solution, the P(AM‐AA)/P(AM‐DMDAAC)/M ⁿ⁺ complex solution has a new peak at 270 nm in its UV spectrum, a larger hydrodynamic radius, and hence a higher solution viscosity, all of which indicate that there exist specific interactions between polymers and M ⁿ⁺ metal ions. These interactions lead to the formation of a network structure and hence an obvious increase not only in solution viscosity but also in resistance of the polymer solution to simple salts, to temperature changes and to shearing. © 2001 Society of Chemical Industry     

Monodisperse‐porous N‐methyl‐D‐glucamine functionalized poly(vinylbenzyl chloride‐co‐divinylbenzene) beads as boron selective sorbent

To generate a new sorbent with high boron adsorption capacity, we synthesized monodisperse‐porous poly(vinylbenzyl chloride‐co‐divinylbenzene), poly(VBC‐co‐DVB), beads 8.5 μm in size by a new “modified seeded polymerization” technique. By using their chloromethyl functionality, the beads were derivatized by a simple, direct reaction with a boron‐selective ligand, N‐methyl‐D ‐glucamine (NMDG). The selection of poly(VBC‐co‐DVB) beads as a starting material allowed to obtain high boron sensitive‐ligand density on the beads depending on their high chloromethyl content. In the batch adsorption runs performed using NMDG‐attached poly(VBC‐co‐DVB) beads as sorbent, boron removal was efficiently performed in a wide pH range between 4 and 11. Quantitative boron removal was observed with the sorbent concentration of 4 g/L. In the same runs, plateau value of equilibrium adsorption isotherm was obtained as 14 mg boron/g beads. Relatively higher boron adsorption was explained by high ligand density and high specific surface area of the sorbent. Boron adsorption isotherms were analyzed using Langmuir and Freundlich models. In the kinetic runs performed for boron removal, the equilibrium was attained within 10 min at a value of 98%. The fast kinetic behavior was explained by the smaller particle size and enhanced porosity of the new sorbent. Infinite solution volume model and unreacted core model were used to evaluate boron adsorption onto the NMDG‐attached poly(VBC‐co‐DVB) beads. The results indicated that the adsorption process is controlled by the particle‐diffusion step. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Poly(acrylamide‐co‐vinyl alcohol)—Superabsorbent materials reinforced by modified clay

A series of copolymeric superabsorbent materials comprising polyacrylamide (PAM), polyvinyl alcohol (PVA) reinforced with variable wt% of modified clay were prepared. The copolymer/clay composite was characterized by Fourier transformed infrared, transmission electron microscopy, and scanning electron microscopy. The water absorbencies of poly(acrylamide‐co‐vinyl alcohol)/clay composites were measured by calculating their percentage swelling ratio. The effects of copolymerization, type of clay, and clay content on the water absorbencies were studied. The swelling was measured in acidic, alkaline, and saline condition to ensure its versatility. The results indicated a remarkable increase in swelling ratio by incorporation of modified clay having higher hydrophilicity and optimum clay loading. The poly(acrylamide‐co‐vinyl alcohol)/clay composite hydrogel was found to have better re‐swelling ability and water retention capacity compared to the virgin copolymer. The substantial enhancement of swelling properties enables the superabsorbent poly(acrylamide‐co‐vinyl alcohol)/clay suitable for agricultural and horticultural application. POLYM. COMPOS., 34:1794–1800, 2013. © 2013 Society of Plastics Engineers     

Effects of a phosphorus compound on the morphology,thermal properties,and flammability of polystyrene/MgAl‐layered double hydroxide nanocomposites

Phosphorus, nitrogen‐containing monomer, acryloxyethyl phenoxy phosphorodiethyl amidate (AEPPA), was synthesized and copolymerized with styrene (St). Nanocomposites of polystyrene and poly(St‐co‐AEPPA) with various amounts of Mg‐Al layered double hydroxide (LDH) were then prepared by in situ bulk polymerization. Structure and morphology of the nanocomposites were investigated by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), and transmission electron microscopy (TEM). The nanocomposites were also examined by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and microscale combustion calorimeter (MCC) to evaluate the thermal properties and flammability. Intercalated or exfoliated structures were obtained for all the nanocomposites. The results from XRD and TEM showed the LDH layers dispersed better in poly(St‐co‐AEPPA) than those in PS matrix. Decrease in thermal stability and enhancement in char residues were observed for poly(St‐co‐AEPPA) nanocomposites compared with PS nanocomposites at the same LDH loading. The addition of LDH can obviously reduce the heat release capacity (HRC) and total heat release (THR) of PS. Moreover, further reductions in HRC and THR were found in poly(St‐co‐AEPPA) nanocomposites. The reduction in flammability was attributed to the lower maximum mass loss rate (MMLR) and higher char residues of the nanocomposites. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers     

Polymer–metal composite particles: Metal particles on poly(St‐co‐MAA) microspheres

Poly(styrene‐co‐methacrylic acid) P(St‐co‐MAA) microspheres with a monodisperse size distribution were prepared by emulsifier‐free emulsion copolymerization of St and MAA. The effects of MAA content on the polymerization rate and the content of MAA in the copolymer were investigated by gravimetrical and IR methods, respectively. The results of XPS measurement indicated the presence of a carboxyl functional group. By chemical metal deposition, nickel or palladium particles were formed and deposited on the surface of P(St‐co‐MAA) microspheres to form P(St‐co‐MAA)Ni or P(St‐co‐MAA)Pd composite particles. XRD measurement and TEM observation confirmed that nickel and palladium metal particles in a small size (20–40 nm) were distributed on surface of the copolymer microspheres. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1693–1698, 2000     

Synthesis and characterization of novel core‐shell magnetic nanogels based on 2‐acrylamido‐2‐methylpropane sulfonic acid in aqueous media

Ultrafine well‐dispersed Fe₃O₄ magnetic nanoparticles were directly prepared in aqueous solution using controlled coprecipitation method. The synthesis of Fe₃O₄/poly (2‐acrylamido‐2‐methylpropane sulfonic acid) (PAMPS), Fe₃O₄/poly (acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) poly(AM‐co‐AMPS) and Fe₃O₄/poly (acrylic acid‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) poly(AA‐co‐AMPS) ‐core/shell nanogels are reported. The nanogels were prepared via crosslinking copolymerization of 2‐acrylamido‐2‐methylpropane sulfonic acid, acrylamide and acrylic acid monomers in the presence of Fe₃O₄ nanoparticles, N,N′‐methylenebisacrylamide (MBA) as a crosslinker, N,N,N′,N′‐tetramethylethylenediamine (TEMED) and potassium peroxydisulfate (KPS) as redox initiator system. The results of FTIR and ¹H‐NMR spectra indicated that the compositions of the prepared nanogels are consistent with the designed structure. X‐ray powder diffraction (XRD) and transmission electron microscope (TEM) measurements were used to determine the size of both magnetite and stabilized polymer coated magnetite nanoparticles. The data showed that the mean particle size of synthesized magnetite (Fe₃O₄) nanoparticles was about 10 nm. The diameter of the stabilized polymer coated Fe₃O₄ nanogels ranged from 50 to 250 nm based on polymer type. TEM micrographs proved that nanogels possess the spherical morphology before and after swelling. These nanogels exhibited pH‐induced phase transition due to protonation of AMPS copolymer chains. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Fabrication of speedy and super‐water‐absorbing non‐woven cloth with hierarchical three‐dimensional network structure

A novel speedy and super‐water‐absorbing non‐woven cloth with hierarchical three‐dimensional network (3D‐SS‐PET) was fabricated through the induction of UV copolymerization on polyethylene terephthalate (PET) fibers followed by a volume phase transition. The macroscopic three‐dimensional network implied that the PET non‐woven substrates are complicated three‐dimensional fibrous materials including oriented fibers in preferential or random directions. The microscopic three‐dimensional network is poly(acrylic acid‐co‐acrylamide) (poly(AA‐co‐AM)) crosslinked copolymer layers on the fiber surface. The rapid volume phase transition was achieved by immersing the swelled non‐woven poly(AA‐co‐AM) modified PET (PET‐g‐AA‐co‐AM) in ethanol. The above process was an essential step to prepare the copolymer chain; after that the fiber surface was extended to form abundant capillary channels and plenty of space between fibers. The water contact angle decreased remarkably from 130° to 0°, while the absorbing capacity of the saturated water and the average water‐absorbing rate experienced an increasing trend, rising from 300 to 324.6 g g^?1 in 24 h and 18.6 and 222 g (g min)^?1 in 40 s, respectively. It was concluded that surface hydrophilicity and capillaries of the hydrophilic modified macroscopic fibrous structure enhanced the water‐absorbing rate and the swelling process contributed to the higher water absorption capacity. This speedy and super‐water‐absorbing material exhibits great potentiality in diapers, sanitary napkins, wound dressings, surgical pads, and hygroscopic and sweat‐free underwear in extremely cold areas. © 2018 Society of Chemical Industry     

Preparation of acrylamide‐based poly‐HIPEs with enhanced mechanical strength using PVDBM‐b‐PEG‐emulsified CO2‐in‐water emulsions

Poly(vinyl acetate‐alt‐dibutyl maleate)‐block‐poly(ethylene glycol) (PVDBM‐b‐PEG) copolymers were synthesized via reversible addition–fragmentation chain transfer radical polymerization and used as emulsifiers to form stable CO₂‐in‐water high internal phase emulsions (C/W HIPEs). Then, highly interconnected cellular polyacrylamide (PAM) and poly(acrylamide‐co‐N‐hydroxymethyl acrylamide) [P(AM‐co‐HMAM)] poly‐HIPEs with enhanced mechanical strength were prepared based on the stable C/W HIPEs. The porous structures of the PAM poly‐HIPEs, as well as morphology and compressive modulus, could be influenced by the surfactant concentration and the length of the CO₂‐philic tails of the surfactants. PAM poly‐HIPEs with the smallest average pore diameter (11.12 ± 0.62 μm) and the highest compressive modulus (22.65 ± 0.10 MPa) could be obtained by using the short CO₂‐philic chains of the PVDBM‐b‐PEG surfactant at a high concentration (1.0 wt %). Moreover, with the copolymerization of N‐hydroxymethyl acrylamide (HMAM) comonomers with acrylamide, the compressive modulus of the obtained P(AM‐co‐HMAM) poly‐HIPEs was three times higher than that of PAM poly‐HIPEs. Both PAM and P(AM‐co‐HMAM) poly‐HIPEs were employed as scaffolds to guide H9c2 cardiac muscle cellular growth. Fluorescence images showed that a smaller average pore size and a narrower pore‐size distribution were helpful for cell growth and proliferation on these materials. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46346.     

Synthesis,physical properties,and characterization of starch‐based blend films by adding nano‐sized TiO2/poly(methyl metacrylate‐co‐acrylamide)

The purpose of this study was to improve the physical properties and to expand the application range of starch‐based blend films added nano‐sized TiO₂/poly(methyl methacrylate‐co‐acrylamide) (PMMA‐co‐AM). Starch‐based blend films were prepared by using corn starch, polyvinyl alcohol (PVA), nano‐sized PMMA‐co‐AM, nano‐sized TiO₂/PMMA‐co‐AM particles, and additives, i.e., glycerol (GL) and citric acid (CA). Nano‐sized PMMA‐co‐AM was synthesized by emulsion polymerization and TiO₂ nanoparticles were also prepared by using sol–gel method. Nano‐sized TiO₂/PMMA‐co‐AM particles were synthesized by wet milling for 48 h. The morphology and crystallinity of TiO₂, nano‐sized PMMA‐co‐AM and TiO₂/PMMA‐co‐AM particles were investigated by using the scanning electron microscope (SEM) and X‐ray diffractometer (XRD). In addition, the functional groups of the TiO₂/PMMA‐co‐AM particles were characterized by IR spectrophotometry (FTIR). The physical properties such as tensile strength (TS), elongation at break (%E), degree of swelling (DS), and solubility (S) of starch‐based films were evaluated. It was found that the adding of nano‐sized particles can greatly improve the physical properties of the prepared films. The photocatalytic degradability of starch/PVA/nano‐sized TiO₂/PMMA‐co‐AM composite films was evaluated using methylene blue (MB) and acetaldehyde (ATA) as photodegradation target under UV and visible light. The degree of decomposition (C/C₀) of MB and ATA for the films containing TiO₂ and CA was 0.506 and 0.088 under UV light irradiation and 0.586 (MB) and 0.631 (ATA) under visible light irradiation, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Exfoliated poly (styrene‐co‐methylstyrene) grafted‐polyaniline/layered double hydroxide nanocomposite synthesized by solvent blending method

Well defined poly (styrene‐co‐methylstyrene) grafted polyaniline/organo‐modified MgAl layered double hydroxide (LDH) was produced through solution intercalation method. After LDH nanoparticles were modified by the anion exchange reaction of MgAl (Cl) LDH with sodium dodecyl benzene sulfonate, Poly (styrene‐co‐methylstyrene) copolymers were synthesized by “living” free radical polymerization and then brominated with N‐bromosuccinimide. Afterwards, 1,4‐phenylenediamine was linked to brominated copolymers and prepared functionalized copolymer with amine. Poly (St‐co‐MSt)‐g‐PANI, has been synthesized by adding solution of ammonium persulfate and p‐toluenesufonic acid in DMSO solvent. Finally, Poly (styrene‐co‐methylstyrene) grafted‐Polyaniline/LDH nanocomposites were prepared by solution intercalation method. Characterization of these well‐defined nanocomposites included FT‐IR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimeter, transmission electron microscopy, and X‐ray diffraction. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Synthesis and properties of carboxymethyl cellulose‐graft‐poly(acrylic acid‐co‐acrylamide) as a novel cellulose‐based superabsorbent

A new cellulose‐based superabsorbent polymer, carboxymethyl cellulose‐graft‐poly(acrylic acid‐co‐acrylamide), was prepared by the free‐radical grafting solution polymerization of acrylic acid (AA) and acrylamide (AM) monomers onto carboxymethyl cellulose (CMC) in the presence of N,N′‐methylenebisacrylamide as a crosslinker with a redox couple of potassium persulfate and sodium metabisulfite as an initiator. The influences of reaction variables such as the initiator content, crosslinker content, bath temperature, molar ratio of AA to AM, and weight ratio of the monomers to CMC on the water absorbency of the carboxymethylcellulose‐graft‐poly(acrylic acid‐co‐acrylamide) copolymer were investigated. The copolymer's structures were characterized with Fourier transform infrared spectroscopy. The optimum reaction conditions were obtained as follows: the bath temperature was 50°C; the molar ratio of AA to AM was 3 : 1; the mass ratio of the monomers to CMC was 4 : 1; and the weight percentages of the crosslinker and initiator with respect to the monomers were 0.75 and 1%, respectively. The maximum water absorbency of the optimized product was 920 g/g for distilled water and 85 g/g for a 0.9 wt % aqueous NaCl solution. In addition, the superabsorbent possessed good water retention and salt resistance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1382–1388, 2007     

Self‐assembled poly(styrene‐co‐N‐isopropylacrylamide) film induced by capillary force

The monodisperse poly(styrene‐co‐N‐isopropylacrylamide) (poly(St‐co‐NIPAAm)) particles prepared by emulsifier‐free emulsion polymerization with microwave irradiation were induced by capillary forces to self‐assemble, and formed the two‐dimensional films on the clean glassware wafer substrates. The morphologies of the two‐dimensional films were characterized by scanning electron microscopy (SEM) and atom force microscopy (AFM). The results showed that monodisperse poly(St‐co‐NIPAAm) particles could form ordered two‐dimensional films by capillary forces. With NIPAAm concentration increasing, there gradually appeared surface undulations or surface defective region on the two‐dimensional films. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3514–3519, 2006     

Simultaneous radiation grafting of vinylbenzyl chloride onto poly(tetrafluoroethylene‐co‐hexafluoropropylene) films

In this study, we demonstrated that vinylbenzyl chloride (VBC), a versatile monomer with reactive a chloromethyl group could be grafted onto a poly(tetrafluoroethylene‐co‐hexafluoropropylene) (FEP) film without a degradation of the chloromethyl group during a simultaneous irradiation process. The effects of various irradiation conditions such as the total dose, dose rate, solvent, and VBC concentration on the degree of grafting of VBC onto a FEP film were also investigated. The prepared PVBC‐grafted films were characterized using FTIR, TGA, and SEM EDX. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Interpolymer interactions and miscibility in poly(n‐butyl methacrylate‐co‐methacrylic acid)/poly(styrene‐co‐N,N‐dimethyl acrylamide) blends

The miscibility of poly(n‐butyl methacrylate‐co‐methacrylic acid) containing 18 mol % methacrylic acid (BMAM‐18) and poly(styrene‐co‐N,N‐dimethyl acrylamide) containing 17 mol % N,N‐dimethyl acrylamide (SAD‐17) was investigated with viscometry, differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) spectroscopy. The DSC analysis showed a single glass‐transition temperature for all the blends, indicating that these copolymers were miscible over the entire composition range. The glass‐transition temperatures of these blends were higher than those calculated with the additivity rule. This was characteristic of the presence of specific interactions. The interactions between BMAM‐18 and the tertiary amide of SAD‐17 were studied with FTIR spectroscopy, which revealed that hydrogen‐bonding interactions occurred between the hydroxyl groups of BMAM‐18 and the carbonyl amide of SAD‐17. A new band characterizing these interactions appeared around 1613 cm^?1. The quantitative results showed that the fraction of the associated amide increased with an increase in the amount of the acidic BMAM‐18 copolymer. Although BMAM‐18 and SAD‐17 led to homogeneous solutions in butan‐2‐one, as the concentration of N,N‐dimethyl acrylamide increased to 32 mol % [as within the poly(styrene‐co‐N,N‐dimethyl acrylamide) containing 32 mol % N,N‐dimethyl acrylamide], complexation occurred when this latter compound was mixed with BMAM‐18 in butan‐2‐one. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2717–2724, 2006     

Antibacterial and Bacterium Adsorbing Macromolecules

Currently studies on antibacterial macromolecules, i. e., bactericidal and bacteriostatic ones, have been made to develop a new utilization field of polymeric materials. In these studies, there are immobilizations of iodine to quaternary ammonium salts, antibiotics, antibacterial groups to macromolecular substances, as well as syntheses of polymers with quaternary ammonium salts, biguanide groups, quaternary pyridinium salts, sulphonium salts, phosphonium salts, and other antibacterial groups. On the other hand, studies have been made of bacterium adsorbing macromolecules, which can remove by adsorbing bacterial cells in water. The macromolecules are the ones based on poly(4‐vinylpyridine‐co‐divinylbenzene), crosslinked poly(3‐ and 4‐chloromethylated styrene‐g‐amine), and poly(glycidyl methacrylate‐g‐amine), as well as filters and microporous membranes are covered with a macromolecule based on quaternized poly(4‐vinylpyridine‐co‐styrene). Here, a review is made of the syntheses and preparation of the respective macromolecules, as well as of their antibacterial activities and the bacterium adsorbing activities.     

Swelling,pH sensitivity,and mechanical properties of poly(acrylamide‐co‐sodium methacrylate) nanocomposite hydrogels impregnated with carboxyl‐functionalized carbon nanotubes

A series of novel nanocomposite hydrogels were prepared by a cross‐linking copolymerization method. Structural and morphological characterizations of the nanocomposite hydrogels revealed that a good compatibility exists between poly(acrylamide‐co‐sodium methacrylate) [P(AM‐co‐SMA)] and carboxyl‐functionalized carbon nanotubes (MWNTs–COOH). The P(AM‐co‐SMA)/MWNTs–COOH nanocomposite hydrogels with a suitable MWNTs–COOH loading exhibited better swelling capability, higher pH sensitivity, good reversibility, and repeatability, and rapid response to external pH stimuli, compared with the P(AM‐co‐SMA). The compression mechanical tests revealed that the nanocomposite hydrogel displayed excellent compressive strengths and elastic mechanical properties, with higher ultimate compressive stress, and meanwhile still retain a good recoverable strain in the presence of MWNTs–COOH. These excellent properties may primarily be attributed to effectively dispersing of a suitable MWNTs–COOH loading into the matrix of the polymers and formation of additional hydrogen bonds. The nanocomposite hydrogels were expected to find applications in drug controlled release and issue engineering. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Utilization of plant ash for the fabrication of novel superabsorbent composites with potassium‐release characteristics

Design and synthesis of the agricultural and ecological superabsorbent materials with cost‐efficient and fertilizer‐release characteristics has recently attracted considerable interests. In this work, the novel poly(sodium‐potassium acrylate‐co‐acrylamide)/plant ash (PNa‐KA‐co‐AM/PA) superabsorbent composites with potassium‐release characteristics were prepared using partially neutralized acrylic acid (Na‐KA), acrylamide (AM), and plant ash (PA) as raw materials, ammonium persulfate (APS) as the initiator, and N,N′‐methylenebisacrylamide (MBA) as the crosslinker. The structure, morphologies, and thermal stability of the composites were characterized by Fourier transform infrared spectrophotometer, scanning electron microscopy, and TGA techniques, respectively. The effects of MBA concentration and PA content on water absorbency were studied, and the swelling properties of the composites in saline solutions and various pHs solution as well as their potassium‐release capabilities were also evaluated. Results indicate that the composites exhibit better thermal stability, salt‐resistant performance, pH‐stability, and potassium‐release properties, and can act as a fertilizer and an effective water‐saving material for agricultural and ecological application. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,properties and thermal stability of water‐soluble poly(potassium 1‐hydroxyacrylate‐co‐styrene) copolymer

The present work investigates the structure properties of copolymers using thermogravimetric analysis, hot stage microscopy, static light scattering, field emission scanning electron microscopy, X‐ray diffraction analysis and a Brookfield viscometer. Poly(potassium 1‐hydroxyacrylate) (PKHA) is a water‐soluble polymer. However, the copolymer of styrene and 2‐isopropyl‐5‐methylene‐1,3‐dioxolan‐4‐one is not water soluble at equal molar ratio because the polystyrene reduces the solubility. The effect of styrene on poly(potassium 1‐hydroxyacrylate‐co‐styrene) copolymer, i.e. poly(KHA‐co‐St), was investigated for the increasing solubility of the copolymer. The solubility was increased at a lower molar ratio of styrene such as 0.4 in the copolymer. It was found that the copolymer was soluble in water when a content ratio of 68/32 mol% of homopolymer was incorporated in poly(KHA₆₈‐co‐St₃₂) copolymer as determined by NMR analysis. Also the poly(KHA₆₈‐co‐St₃₂) copolymer was found to be salt tolerant, possessed water absorption capacity and was thermally stable up to 183 °C. Moreover, it is shown that the polystyrene content plays a key role in the thermal stability of the copolymer. © 2017 Society of Chemical Industry