Polyaniline nanofibers for In situ MAO‐catalyzed polymerization of ethylene

In this work electro‐conductive polyaniline nanofibers (PAni‐nanofibers) were prepared via interfacial methodology. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations revealed that the synthesized PAni‐nanofibers present high aspect ratio with an average diameter of 80 nm, while they exhibit high conductivity (DC conductivity values: 4.19 ± 0.21 S cm^?1). After specific treatment to remove moisture and remaining trapped HCl from PAni‐nanofibers, it was possible to prepare promising polyethylene (PE)/PAni composites by in situ polymerization of ethylene using bis(cyclopentadienyl) zirconium(IV) dichloride (Cp₂ZrCl₂) and methylaluminoxane (MAO) as catalytic system. More precisely, various contents of PAni‐nanofibers (from 0.2 to 7 wt %) were successfully incorporated in the in situ produced PE/PAni nanocomposites. PAni‐nanofibers were found to affect significantly the crystallization of the polyolefinic matrix while preserving its thermal stability. Preliminary measurements of electric properties showed PAni‐nanofibres are able to bring electro‐conductive properties to the in situ polymerized PE/PAni composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41197.     

Hybrid polyaniline–TiO2 nanocomposite Langmuir–Blodgett thin films: Self‐assembly and their characterization

Polyaniline (PANi)–titanium dioxide (TiO₂) nanocomposite materials were prepared by chemical polymerization of aniline doped with TiO₂ nanoparticles. Surface pressure–area (π‐A) isotherms of these nanocomposites show phase transformations in the monolayer during compression process. Multiple isotherms indicate that the monolayer of the nanocomposite material can retain its configuration during compression‐expansion cycles. Langmuir–Blodgett thin films of PANi–TiO₂ nanocomposite were deposited on the quartz and indium tin oxide coated conducting glass substrates. Fourier transfer infrared spectroscopy and UV–visible spectroscopy study indicates the presence of TiO₂ in PANi, whereas X‐ray Diffraction study confirmed the anatase phase of TiO₂ and particle size (～nm) of PANi–TiO₂. The morphology of Langmuir–Blodgett films of these nanocomposites was also characterized by atomic force microscopy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41386.     

In situ fabrication of polyaniline‐silver nanocomposites using soft template of sodium alginate

Polyaniline (PANI)‐Ag nanocomposites were synthesized by in situ chemical polymerization approach using ammonium persulfate and silver nitrate as oxidant. Characterizations of nanocomposites were done by ultraviolet–visible ( UV–vis), Fourier transform infrared (FTIR), X‐ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy (TEM). UV–vis, XRD and FTIR analysis established the formation of PANI/Ag nanocomposites and face‐centered‐cubic phase of silver. PANInanofibers were of average diameter ～ 30 nm and several micrometers in length. Morphological analysis showed that the spherical‐shaped silver nanoparticles decorate the surface of PANI nanofibers. Silver nanoparticles of average diameter ～ 5–10 nm were observed on the TEM images for the PANI‐Ag nanocomposites. Such type of PANI‐Ag nanocomposites can be used as bistable switches as well as memory devices. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

In situ synthesis and characterization of fluorinated polybenzobisoxazole/silica‐coated magnetic Fe3O4 nanocomposites exhibiting enhanced electromagnetic wave absorption property

A series of magnetic fluorinated polybenzobisoxazole (6FPBO)/silica‐coated Fe₃O₄ magnetic nanoparticles composites were synthesized through in‐situ polymerization. The structure and morphology of the obtained nanocomposites were characterized by X‐ray diffraction, transmission electron microscopy, and scanning electronic microscope (SEM). The SEM images indicated that the crosslinking structure is formed in magnetic 6FPBO nanocomposites. The magnetic and electromagnetic properties of magnetic 6FPBO nanocomposites in the 2–18 GHz frequency range were characterized by vibration sample magnetometer and vector network analyzer, respectively. The calculated reflection loss of the as‐prepared magnetic 6FPBO nanocomposites showed that the best microwave absorption reached to −20 dB at 17 GHz with a matching thickness of 3.00 mm. POLYM. COMPOS., 36:884–891, 2015. © 2014 Society of Plastics Engineers     

Novel polyfuran/functionalized multiwalled carbon nanotubes composites with improved conductivity: Chemical synthesis,characterization, and antioxidant activity

Novel composites containing very small quantities of functionalized multiwalled carbon nanotubes (MWCNTs‐COOH; 0.025, 0.050, and 0.075 g), and furan were synthesized via in situ chemical oxidative polymerization. The polymerization was carried out in nitromethane at room temperature using anhydrous iron (III) chloride (FeCl₃) as an oxidant. The nanocomposites were characterized by Fourier transform infrared, ultraviolet–visible, X‐ray diffraction, differential scanning calorimetry, and field emission scanning electron microscopy. All synthesized composites were crystalline and showed good solubility in dimethyl sulfoxide and N‐methyl 2‐pyrrolidone. The conductivity of composites was measured with a four‐probe method, and it was found that the electrical conductivity increased by increasing the amount of MWCNTs‐COOH. The maximum electrical conductivity value (6.68 × 10⁻⁴ S cm⁻¹) was obtained for polyfuran/MWCNTs‐COOH (1:0.075, v/w). The resulting composites were analyzed for their antioxidant activity using 2,2‐diphenyl‐1‐picrylhydrazyl assay. The results showed that the antioxidant activity of the composites increased by increasing the amount of MWCNTs‐COOH in nanocomposite. POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

A new approach for conductive network formation in electrospun poly(vinylidene fluoride) nanofibers

Conductive nanofibers of poly(vinylidene fluoride) (PVDF) filled with polyaniline (PANi)‐coated multi‐wall carbon nanotubes (MWCNTs) were fabricated using the electrospinning technique. PANi is an intrinsically conductive polymer. The addition of PANi‐coated MWCNTs to PVDF created short conductive strands on the surface of the nanofibers, facilitating the formation of a conductive network in the transverse direction of the nanofibers. Piezoelectricity along with electric conductivity makes these PVDF nanofibers promising for applications such as sensors and actuators. Electrospun PVDF nanofiber mats had higher piezoelectricity than melt‐processed samples produced using traditional polymer processing techniques, such as compression molding. Spectroscopic imaging techniques were employed to study the effects of the filler and processing conditions on the nanofiber structure. X‐ray diffraction, Fourier transform infrared spectroscopy and differential scanning calorimetry results indicated a large increase in the β‐phase crystals of the PVDF nanofibers. This higher content of β‐phase crystals enhanced the piezoelectricity of the nanofibers. © 2015 Society of Chemical Industry     

Plasma treatment‐induced fluorine‐functionalized multi‐walled carbon nanotubes to modify poly(ethylene terephthalate) obtained via in situ polymerization

The introduction of carbon nanotubes in a polymer matrix can markedly improve its mechanical properties and electrical conductivity, and much effort has been devoted to achieve homogeneous dispersions of carbon nanotubes in various polymers. Our group previously performed successfully fluorine‐grafted modification on the sidewalls of multi‐walled carbon nanotubes (MWCNTs), using homemade equipment for CF₄ plasma irradiation. As a continuation of our previous work, in the present study CF₄ plasma‐treated MWCNTs (F‐MWCNTs) were used as a nanofiller with poly(ethylene terephthalate) (PET), which is a practical example of the application of such F‐MWCNTs to prepare polyester/MWCNTs nanocomposites with ideal nanoscale structure and excellent properties. As confirmed from scanning electron microscopy observations, the F‐MWCNTs could easily be homogeneously dispersed in the PET matrix during the in situ polymerization preparation process. It was found that a very low content of F‐MWCNTs dramatically altered the crystallization behavior and mechanical properties of the nanocomposites. For example, a 15 °C increase in crystallization temperature was achieved by adding only 0.01 wt% F‐MWCNTs, implying that the well‐dispersed F‐MWCNTs act as highly effective nucleating agents to initiate PET crystallization at high temperature. Meanwhile, an abnormal phenomenon was found in that the melt point of the nanocomposites is lower than that of the pure PET. The mechanism of the tailoring of the properties of PET resin by incorporation of F‐MWCNTs is discussed, based on structure–property relationships. The good dispersion of the F‐MWCNTs and strong interfacial interaction between matrix and nanofiller are responsible for the improvement in mechanical properties and high nucleating efficiency. The abnormal melting behavior is attributed to the recrystallization transition of PET occurring at the early stage of crystal melting being retarded on incorporation of F‐MWCNTs. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of CTAB‐intercalated graphene/polyaniline nanocomposites via in situ oxidative polymerization

Polyaniline/graphene (PANI/GN) nanocomposites were fabricated via in‐situ oxidative polymerization of aniline in the presence of cetyltrimethylammonium bromide (CTAB) modified graphene (CGN) in 1M hydrochloric acid (HCl) solution. The morphology and structure of PANI/GN samples were investigated by Fourier transform infrared spectrum, X‐ray diffraction, ultraviolet and visible spectrum, thermogravimetric analysis, field‐emission scanning microscope (FE‐SEM), and transmitting electron microscopy (TEM). The conductivities of the PANI/GN nanocomposites were measured using four‐probe electrical conductivity measurement. The results indicated that the GN sheets disperse into the form of monolayer or stack few layers in PANI matrix. The GN sheets serve as a support material for PANI particles and the structure of GN covered with PANI nanoparticles were confirmed by FE‐SEM and TEM. The electrical conductivities of the PANI/GN samples have been improved compared with pure PANI prepared in the similar condition. POLYM. COMPOS., 36:1767–1774, 2015. © 2014 Society of Plastics Engineers     

Polypyrrole‐silk electro‐conductive composite fabric by in situ chemical polymerization

This article describes the preparation of polypyrrole‐silk composite fabric by in situ chemical polymerization of pyrrole. In situ polymerization process has been optimized by employing Box‐Behnken response surface design. The effect of process parameters on surface resistivity of the fabric has been statistically analyzed. Most significant process parameter and interaction effects have been identified. Thermal, electrical, and morphological properties of the composite fabric have been studied. Surface resistivity of the fabric obtained is 636.33 Ω. The fabric composite shows a liner V–I characteristic like an Ohmic conductor. An exponential rise of surface temperature of the fabric is observed by the application of DC voltage across it. Optical microscopic and SEM studies reveal uniform and even coating of polypyrrole on silk surface. FTIR studies indicate a possible chemical interaction between polypyrrole and silk. The polypyrrole‐treated composite fabric exhibits enhanced thermal stability as is evidenced from DSC and TGA result. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41336.     

High‐performance antistatic ethylene–vinyl acetate copolymer/high‐density polyethylene composites with graphene nanoplatelets coated by polyaniline

Graphene nanoplatelets coated by polyaniline (GNP@PANI) and ethylene–vinyl acetate (EVA) copolymer–high‐density polyethylene (HDPE) were used for the first time to prepare high‐performance antistatic composites through an effective method that combined solution mixing and melt blending. GNP@PANI nanocomposites were fabricated by in situ polymerization to improve the dispersion of graphene nanoplatelets (GNPs) in the EVA–HDPE matrix and the compatibility between the GNPs and the EVA–HDPE matrix. The GNP@PANI nanocomposites and EVA were first prepared as a premix through solution mixing, and then, the premix and HDPE were prepared as highly antistatic composites through melt blending. The dispersion of the GNPs in the EVA–HDPE matrix and the compatibility between the GNPs and the EVA–HDPE matrix were confirmed by field emission scanning electron microscopy and transmission electron microscopy observations. The GNP@PANI–EVA–HDPE composites met the requirements for antistatic materials when the content of the GNP@PANI nanocomposites was 5 wt % with only about 1 wt % GNPs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45303.     

Structure and properties of multi‐walled carbon nanotubes/polyethylene nanocomposites synthesized by in situ polymerization with supported Cp2ZrCl2 catalyst

Multi‐walled carbon nanotubes (MWCNTs)/polyethylene (PE) nanocomposites were prepared via in situ polymerization with MWCNTs supported Bis‐ (cyclopentadienyl) zirconium dichloride (Cp₂ZrCl₂) catalyst. X‐ray photoelectron spectroscopy (XPS) and field emission scanning electron microscope (FESEM) results implied that Cp₂ZrCl₂ catalyst was immobilized in the surface of the MWCNTs supports via a bridge of methylaluminoxane (MAO). The efficient dispersion of MWCNTs in PE matrix and the strong compressive forces associated with PE on the MWCNTs were demonstrated by means of transmission electron microscope (TEM), FESEM and Raman spectra. With introducing 0.2 wt% MWCNTs, both the tensile strength and elongation of MWCNTs/PE nanocomposite were improved by factors of 1.6 (from 29 to 45 MPa) and 1.5 (from 909% to 1360%) comparing with the pure PE, respectively. Morphology observation of fractured surface revealed that the PE firmly adhered to the nanotubes, which was responsible for the significant improvement of the mechanical properties of nanocomposites. Thermal stabilities of the nanocomposites were significantly improved. In addition, the MWCNTs/PE nanocomposites showed very high ultraviolet (UV) shielding property, which could increase photooxidative stability of the PE. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

In situ polymerized nanocomposites of poly(butylene succinate)/Tio2 nanofibers: molecular weight,morphology, and thermal properties

In this study, the nanocomposites of poly(butylene succinate) (PBS) and TiO₂ nanofibers were first synthesized via in situ polymerization. Molecular weight, morphology, and thermal properties of the nanocomposites were characterized. As the weight percentage of TiO₂ nanofibers increased from 0 to 2%, the molecular weight of PBS in the nanocomposites decreased gradually compared with that of pure PBS. In morphology, the nanocomposites were constituted by free PBS and PBS‐grafted TiO₂ nanofibers (PBS‐g‐TiO₂), which were proved by the Fourier transform infrared, scanning electron microscopy (SEM), and transmission electron microscopy. In addition, the SEM demonstrated the strong interfacial interaction and homogeneous distribution between TiO₂ nanofibers and PBS matrix. The thermal properties determined by differential scanning calorimetry and thermogravimetric analysis included the increasing of cold crystallization temperatures, the melting temperatures, and the thermal stability. Besides, the crystallinity and the rate of crystallization of the nanocomposites were enhanced, which were also observed by the X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Morphology,thermal, and crystallization properties of poly(butylene succinate)‐grafted Nanocrystalline Cellulose by polymerization in situ

The compounds 1,4‐butanediol, succinic anhydride, and nanocellulose (NCC) were used to synthesize poly(butylene succinate)‐grafted Nanocrystalline Cellulose (PBS‐g‐NCC) nanocomposites via polymerization in situ. The resulting structures were examined by transmission electron microscopic (TEM), scanning electron microscope (SEM), ¹H and ¹³C‐nuclear magnetic resonance spectroscopic (NMR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X‐ray diffraction (XRD) analyses. TEM showed the cellulose to be nanoscale and SEM analysis indicated that 3 wt% NCC dispersed well in PBS matrix. ¹H and ¹³C‐NMR analyses indicated the product to possess peaks characteristic of PBS. DSC analysis clearly showed that the NCC increased the PBS crystallinity when 3 wt% NCC was introduced into PBS matrixes by polymerization in situ, compared to pure PBS. TGA illustrated that the thermal stability of PBS‐g‐NCC was better than that of pure PBS, when 3 wt% NCC was added. XRD analysis suggested that 3 wt% NCC improved PBS crystallinity, which was in good agreement with the present DSC results. POLYM. ENG. SCI., 59:928–934, 2019. © 2018 Society of Plastics Engineers     

A facile route to develop electrical conductivity with minimum possible multi‐wall carbon nanotube (MWCNT) loading in poly(methyl methacrylate)/MWCNT nanocomposites

Today, we stand at the threshold of exploring carbon nanotube (CNT) based conducting polymer nanocomposites as a new paradigm for the next generation multifunctional materials. However, irrespective of the reported methods of composite preparation, the use of CNTs in most polymer matrices to date has been limited by challenges in processing and insufficient dispersability of CNTs without chemical functionalization. Thus, development of an industrially feasible process for preparation of polymer/CNT conducting nanocomposites at very low CNT loading is essential prior to the commercialization of polymer/CNT nanocomposites. Here, we demonstrate a process technology that involves in situ bulk polymerization of methyl methacrylate monomer in the presence of multi‐wall carbon nanotubes (MWCNTs) and commercial poly(methyl methacrylate) (PMMA) beads, for the preparation of PMMA/MWCNT conducting nanocomposites with significantly lower (0.12 wt% MWCNT) percolation threshold than ever reported with unmodified commercial CNTs of similar qualities. Thus, a conductivity of 4.71 × 10^?5 and 2.04 × 10^?3 S cm^?1 was achieved in the PMMA/MWCNT nanocomposites through a homogeneous dispersion of 0.2 and 0.4 wt% CNT, respectively, selectively in the in situ polymerized PMMA region by using 70 wt% PMMA beads during the polymerization. At a constant CNT loading, the conductivity of the composites was increased with increasing weight percentage of PMMA beads, indicating the formation of a more continuous network structure of the CNTs in the PMMA matrix. Scanning and transmission electron microscopy studies revealed the dispersion of MWCNTs selectively in the in situ polymerized PMMA phase of the nanocomposites. Copyright © 2012 Society of Chemical Industry     

Hyperbranched polyurethane/triethanolamine functionalized multi‐walled carbon nanotube nanocomposites as remote induced smart materials

Triethanolamine functionalized multi‐walled carbon nanotubes (TEA‐f‐MWCNTs)/hyperbranched polyurethane nanocomposites were prepared by the in situ polymerization technique. The functionalization of the MWCNTs was confirmed by Fourier transform infrared spectroscopy and Raman spectroscopy studies. The homogeneous distribution and the strong interfacial interaction of TEA‐f‐MWCNTs with the polyurethane chains were confirmed by transmission electron microscopy and Fourier transform infrared spectroscopy studies, respectively. Significant enhancements of tensile strength (6.5 ? 28.5 MPa) and scratch resistance (3–7 kg) with content of TEA‐f‐MWCNTs (0–2 wt%) were observed. Thermogravimetric analysis showed an increase in thermal stability from 240 to 287 °C by the formation of nanocomposites. X‐ray diffraction and differential scanning calorimetry studies confirmed an increment in the degree of crystallinity of the nanocomposites with increase in TEA‐f‐MWCNT content. The extent of shape recovery as well as recovery speed were enhanced with increase in the output power of the microwave. Thus the studied nanocomposites could be utilized as non‐contact microwave energy tunable shape memory materials. © 2013 Society of Chemical Industry     

Property investigation of polypropylene/multiwall carbon nanotube nanocomposites prepared via in situ polymerization

In this study, polypropylene/carbon nanotube nanocomposites were prepared via in situ polymerization using a bi‐supported Ziegler ? Natta catalytic system. In this system, magnesium ethoxide and multiwall carbon nanotubes (MWCNTs) are jointly used as catalyst supports. SEM images reveal the distribution and quite good dispersion of MWCNTs throughout the polypropylene (PP) matrix. The thermal properties of the samples were examined using DSC and TGA tests. The results show that the crystallization temperature of the nanocomposites significantly increases while the melting point is not markedly affected. In addition, the thermal stability is improved. The melt rheological properties of PP/MWCNT nanocomposites in the linear and nonlinear viscoelastic response regions were studied. An increment of the complex viscosity (η^*), storage modulus (G′) and loss modulus (G′′) and a decrement of the loss factor (tan δ) compared with neat PP are observed. Steady shear flow experiments show an increase in shear viscosity with increasing the MWCNT content. © 2013 Society of Chemical Industry     

Interfacial crystallization of low‐crystallinity elastomer incorporated by multi‐walled carbon nanotubes: Mechanical reinforcement,structural evolution and enhanced thermal stability

In this paper, we report interfacial crystallization in olefin block copolymer (OBC) with low crystallinity incorporated by multi‐walled carbon nanotubes (MWCNTs). A hybrid shish‐kebab (HSK) superstructure in nanocomposites is observed that MWCNTs act as central shish and OBC crystals grow perpendicular to the nanotubes axis. The mechanical properties of nanocomposites are significantly improved with incorporation of MWCNTs. The most ideal reinforcing and toughening effect is both observed in nanocomposites with MWCNTs content of 1 wt % that can increase tensile strength by 122% as well as elongation at break by 36%. Efficient load transfer are confirmed with in‐situ Raman spectra that G’ band of MWCNTs in OBC matrix exhibit a downshifting trend and symmetric broadening of line shape which reveals additional macroscale strain from axial extension of MWCNTs in nanocomposites, thus suggesting a certain load is carried by HSK superstructure. The structural evolution of OBC and nanocomposites are investigated by in‐situ wide‐angle X‐Ray Diffraction (WAXD). The Herman's orientation factor of nanocomposites with 2 wt % MWCNTs incorporation is lower than that of neat matrix at mall and intermediate strains, indicating a heterogeneous stress distribution and low compliance of HSK superstructure, which is consistent with in‐situ Raman results. Moreover, the nanocomposites presents significantly enhanced thermal stability. The onset decomposition temperature of nanocomposites with 3 wt % MWCNTs can be 60.2°C higher than that of neat OBC. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42368.     

Towards transparent PMMA/SiO2 nanocomposites with promising scratch‐resistance by manipulation of SiO2 aggregation followed by in situ polymerization

Poly(methyl methacrylate) grafted silica (SiO₂‐g‐PMMA) was synthesized via in situ suspension polymerization. To achieve better uniform dispersion, hexadecyltrimethylammonium bromide (CTAB) was introduced into xylene to manipulate SiO₂ aggregation. SiO₂‐g‐PMMA or SiO₂ was incorporated into PMMA matrix by in situ polymerization to prepare PMMA‐based nanocomposites. The effect of CTAB amount, in the range 0–35 wt %, on the modification was evaluated by DLS, TGA, and FTIR. Furthermore, morphology, optical, mechanical, and thermal properties of PMMA nanocomposites was characterized by SEM, UV–vis, DMA, and TGA. Owing to surface functionalization, SiO₂‐g‐PMMA exhibited far more excellent compatibility and dispersion in matrix compared with SiO₂. Surface hardness and thermal properties of nanocomposites were enhanced significantly under the premise in high transparency. It is expected that transparent nanocomposites with promising scratch‐resistance could have wide applications, such as airplane shielding window and daily furniture. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44612.     

Nanocomposite films of poly(vinylidene fluoride) filled with polyvinylpyrrolidone‐coated multiwalled carbon nanotubes: Enhancement of β‐polymorph formation and tensile properties

To improve interactions between carbon nanotubes (CNTs) and poly(vinylidene fluoride) (PVDF) matrix, multiwalled CNTs (MWCNTs) were successfully coated with amphiphilic polyvinylpyrrolidone (PVP) using an ultrasonication treatment performed in aqueous solution. It was found that PVP chains could be attached noncovalently onto the nanotubes' surface, enabling a stable dispersion of MWCNTs in both water and N,N‐dimethylformamide. PVP‐coated MWCNTs/PVDF nanocomposite films were prepared by a solution casting method. The strong specific dipolar interaction between the PVP's carbonyl group (C?O) and the PVDF's fluorine group C?F₂ results in high compatibility between PVP and PVDF, helping PVP‐coated MWCNTs to be homogenously dispersed within PVDF. Fourier transform infrared and X‐ray diffraction characterization revealed that the as‐prepared nanocomposite PVDF films exhibit a purely β‐polymorph even at a very low content of PVP‐wrapped MWCNTs (0.1 wt%) while this phase is totally absent in the corresponding unmodified MWCNTs/PVDF nanocomposites. A possible mechanism of β‐phase formation in PVP‐coated MWCNTs/PVDF nanocomposites has been discussed. Furthermore, the tensile properties of PVDF nanocomposites as function of the content in PVP‐coated MWCNTs were also studied. Results shows that the addition of 2.0 wt% of PVP‐coated MWCNTs lead to a 168% increase in Young's modulus and a 120% in tensile strength. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Crystallization behavior and UV‐protection property of PET‐ZnO nanocomposites prepared by in situ polymerization

The aim of this study was to investigate the crystallization behavior and UV‐protection property of polyethylene terephthalate (PET)‐ZnO nanocomposits. PET‐ZnO nanocomposites containing 0.5–3.0 wt % of ZnO were successfully synthesized by in situ polymerization. The Fourier transformed infrared (FTIR) spectroscopy indicated the silane coupling agent was anchored onto the surface of ZnO. Scanning electron microscope (SEM) images showed ZnO particles were dispersed homogeneously in PET matrix with amount of 0.5–1.0 wt %. Differential scanning calorimetry (DSC) results exhibited that the incorporation of ZnO into PET resulted in increase of the melting transition temperature (T_m) and crystallization temperature (T_c) of PET‐ZnO nanocomposites. The crystallization behavior of PET and PET‐ZnO nanocomposites was strongly affected by cooling rate. ZnO nanoparticles can act as an efficient nucleating agent to facilitate PET crystallization. UV–vis spectrophotometry showed that UV‐ray transmittance of PET‐ZnO nanocomposites decreased remarkably and reached the minimum value of 14.3% with 1.5 wt % of ZnO, compared with pure PET whose UV‐ray transmittance was 84.5%. PET‐ZnO nanocomposites exhibited better UV‐protection property than pure PET, especially in the range of UVA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009