16‐QAM OFDM‐Based W‐Band Polarization‐Division Duplex Communication System with Multi‐gigabit Performance

This paper presents a novel 90 GHz band 16‐quadrature amplitude modulation (16‐QAM) orthogonal frequency‐division multiplexing (OFDM) communication system. The system can deliver 6 Gbps through six channels with a bandwidth of 3 GHz. Each channel occupies 500 MHz and delivers 1 Gbps using 16‐QAM OFDM. To implement the system, a low‐noise amplifier and an RF up/down conversion fourth‐harmonically pumped mixer are implemented using a 0.1‐μm gallium arsenide pseudomorphic high‐electron‐mobility transistor process. A polarization‐division duplex architecture is used for full‐duplex communication. In a digital modem, OFDM with 256‐point fast Fourier transform and (255, 239) Reed‐Solomon forward error correction codecs are used. The modem can compensate for a carrier‐frequency offset of up to 50 ppm and a symbol rate offset of up to 1 ppm. Experiment results show that the system can achieve a bit error rate of 10^–5 at a signal‐to‐noise ratio of about 19.8 dB.     

16‐QAM‐Based Highly Spectral‐Efficient E‐band Communication System with Bit Rate up to 10 Gbps

This paper presents a novel 16‐quadrature‐amplitude‐modulation (QAM) E‐band communication system. The system can deliver 10 Gbps through eight channels with a bandwidth of 5 GHz (71‐76 GHz/81‐86 GHz). Each channel occupies 390 MHz and delivers 1.25 Gbps using a 16‐QAM. Thus, this system can achieve a bandwidth efficiency of 3.2 bit/s/Hz. To implement the system, a driver amplifier and an RF up‐/down‐conversion mixer are implemented using a 0.1 µm gallium arsenide pseudomorphic high‐electron‐mobility transistor (GaAs pHEMT) process. A single‐IF architecture is chosen for the RF receiver. In the digital modem, 24 square root raised cosine filters and four (255, 239) Reed‐Solomon forward error correction codecs are used in parallel. The modem can compensate for a carrier‐frequency offset of up to 50 ppm and a symbol rate offset of up to 1 ppm. Experiment results show that the system can achieve a bit error rate of 10^?5 at a signal‐to‐noise ratio of about 21.5 dB.     

Novel noncoherent detection for multi‐hop amplify‐and‐forward relaying systems

Because of the multiplication of fading gains and noise, the actual distributions of the received signals in multi‐hop amplify‐and‐forward relaying systems are no longer Gaussian. In this work, they are fitted with the t location‐scale distribution and the logistic distribution. Using these distributions, two novel noncoherent detectors are proposed based on the maximum likelihood method. Numerical results show that both new detectors outperform the conventional energy detector. The performance gain increases when the signal‐to‐noise ratio increases or when the hop number decreases. Importantly, the bit error rate of the conventional energy detector reaches an error floor while the bit error rates of the new detectors do not. Copyright © 2015 John Wiley & Sons, Ltd.     

Bandwidth‐efficient turbo coding over Rayleigh fading channels

Introduced in 1993, turbo codes can achieve high coding gains close to the Shannon limit. In order to design power and bandwidth‐efficient coding schemes, several approaches have been introduced to combine high coding rate turbo codes with multilevel modulations. The coding systems thus obtained have been shown to display near‐capacity performance over additive white Gaussian noise (AWGN) channels. For communications over fading channels requiring large coding gain and high bandwidth efficiency, it is also interesting to study bit error rate (BER) performance of turbo codes combined with high order rectangular QAM modulations. To this end, we investigate, in this paper, error performance of several bandwidth‐efficient schemes designed using the bit‐interleaved coded modulation approach that has proven potentially very attractive when powerful codes, such as turbo codes, are employed. The structure of these coding schemes, termed ‘bit‐interleaved turbo‐coded modulations’ (BITCMs), is presented in a detailed manner and their BER performance is investigated for spectral efficiencies ranging from 2 to 7 bit/s/Hz. Computer simulation results indicate that BITCMs can achieve near‐capacity performance over Rayleigh fading channels, for all spectral efficiencies considered throughout the paper. It is also shown that the combination of turbo coding and rectangular QAM modulation with Gray mapping constitutes inherently a very powerful association, since coding and modulation functions are both optimized for operation in the same signal‐to‐noise ratio region. This means that no BER improvement is obtainable by employing any other signal constellation in place of the rectangular ones. Finally, the actual influence of the interleaving and mapping functions on error performance of BITCM schemes is discussed. Copyright © 2002 John Wiley & Sons, Ltd.     

Error rate and outage of dual‐hop DF relay system with selection combining over Rice fading

Performance of dual‐hop decode‐and‐forward relay system with selection‐combining receiver is analyzed over Rice fading channels. The following closed‐form expressions of performance metrics are derived: moment generating function for selection‐combining receiver output signal‐to‐noise ratio, exact average bit error rate of noncoherent modulations, approximate average symbol error rate for coherent modulations, and outage probability. We also obtain simple asymptotic expressions for moment generating function, exact average bit error rate, average symbol error rate, and outage probability, which are useful to characterize the diversity order and the coding gain. The optimal power allocation analysis suggests that the optimal power allocation factor is independent of total signal‐to‐noise ratio and source‐to‐destination link fading parameters. The accuracy of the obtained analytical expressions are supported by computer simulation results.     

Performance comparison of dual‐hop hybrid decode‐or‐amplify‐forward relay schemes for M‐ary quadrature amplitude modulation burst transmission over Rayleigh fading channels

This paper shows the analytical performance expressions of M‐ary quadrature amplitude modulation burst symbol transmission for hybrid decode‐or‐amplify‐forward (HDAF) relay schemes over quasi‐static Rayleigh‐fading channels. First, we derive the probability density function of the received instantaneous signal‐to‐noise ratio as the simplified form, which is related to all the possible occurrence probabilities of error‐events for M‐ary quadrature amplitude modulation burst transmission. On the basis of the derived probability density function, we express average bit error probability, average symbol error probability, and average burst error rate as closed forms, which can be also applied to both amplify‐and‐forward and adaptive decode‐and‐forward (ADF) schemes. The analysis and simulation results show that HDAF scheme for burst transmission can achieve the performance of ADF scheme with symbol‐by‐symbol transmission, which is the achievable lower bound. Furthermore, the outage probability, the normalized channel capacity, and the goodput performance are also derived as closed forms. The analysis shows the superiority of HDAF scheme to ADF scheme. Comparison with simulations confirms that the derived analytical expressions are accurate over all signal‐to‐noise ratio regions and for different numbers of relays and modulation orders.     

Performance analysis of hybrid transmit antenna selection/maximal‐ratio transmission in Nakagami‐m fading channels

Hybrid diversity systems have been of great importance because they provide better diversity orders and robustness to the fading effects of wireless communication systems. This paper focuses on the performance analysis of multiple‐input gle‐output systems that employ combined transmit antenna selection (TAS)/maximal‐ratio transmission (MRT) techniques (i.e., hybrid TAS/MRT). The probability density function, the moment generating function and the n ^th order moments of the output signal‐to‐noise ratio of the investigated diversity scheme are derived for independent identically distributed flat Nakagami‐m fading channels. The system capacity of the hybrid TAS/MRT scheme is examined from the outage probability perspective. Exact bit/symbol error rate (BER/SER) expressions for binary frequency shift keying, M‐ary phase shift keying and square M‐ary quadrature amplitude modulation signals are derived by using the moment generating function‐based analysis method. By deriving the upper bounds for BER/SER expressions, it is also shown that the investigated systems achieve full diversity orders at high signal‐to‐noise ratios. Also, by Monte Carlo simulations, analytical performance results are validated and the effect of feedback delay, channel estimation error and feedback quantization error on BER/SER performances are examined. Copyright © 2011 John Wiley & Sons, Ltd.     

Asymptotic analysis of multi‐branch EGC and SC over equally correlated Rician channels

Closed‐form asymptotic expressions for bit error rate and outage probability are derived for multi‐branch equal gain combining and selection combining receiver diversity over equally correlated Rician channels. Numerical results indicate that these analytical solutions can provide accurate estimation of bit error rate and outage probability in large signal‐to‐noise ratio regimes. The analytical results reveal some important insights into the performance characteristics of equal gain combining and selection combining diversity operating over equally correlated Rician fading channels. Copyright © 2013 John Wiley & Sons, Ltd.     

Performance Analysis of a Two‐Hop Fixed‐Gain MIMO Multiuser Relay Network with End‐to‐End Antenna Selection

This letter analyzes the performance of a two‐hop MIMO multiuser relay network with a fixed gain amplify‐and‐forward protocol and antenna selection at the transmitter and receiver. A new expression for the cumulative distribution function of the highest instantaneous end‐to‐end signal‐to‐noise ratio is derived. Based on the above result, closed‐form expressions for outage probability and bit error rate are presented. Also, the diversity order of the system is determined. Finally, computer simulations are compared to the analytical results, and insights and observations are provided.     

Fractional Multi‐bit Differential Detection Technique for Continuous Phase Modulation

A new low‐complexity differential detection technique, fractional multi‐bit differential detection (FMDD), is proposed in order to improve the performance of continuous phase modulation (CPM) signals such as Gaussian minimum shift keying (GMSK) and Gaussian frequency shift keying (GFSK). In comparison to conventional one‐bit differential detected (1DD) GFSK, the FMDD‐employed GFSK provides a signal‐to‐noise ratio advantage of up to 1.8 dB in an AWGN channel. Thus, the bit‐error rate performance of the proposed FMDD is brought close to that of an ideal coherent detection while avoiding the implementation complexity associated with the carrier recovery. In the adjacent channel interference environment, FMDD achieves an even larger SNR advantage compared to 1DD.     

Link selection based on switching between full‐duplex and half‐duplex modes

Multiple‐input multiple‐output systems can achieve a full sum rate (SR) via full duplex (FD). However, its performance is degraded by self‐interference (SI) that occurs between the transmitter and receiver at the same node and thus is constrained by error floors. Conversely, half duplex (HD) can avoid the SI albeit at lower spectral efficiency, and the slope of its error curve is determined by the diversity order. In this study, a link selection scheme based on switching between FD and HD is examined as a simple method to improve the bit error rate (BER) performance of FD systems. In the proposed link selection algorithm, either FD or HD is selected based on the received minimum distance and signal‐to‐interference plus noise ratio. Simulation results indicate that the proposed hybrid FD/HD switching system offers significant BER performance improvement when compared with that of the conventional FD and FD based on only the received minimum distance under the same fixed SR. Under relatively sufficient SI cancellation, it is demonstrated to outperform the HD with a diversity advantage in low and medium signal‐to‐noise ratio region.     

Bi‐directional relay‐assisted FSO communication systems over strong turbulence channels with pointing errors

This paper presents the capacity and average bit error rate (BER)‐based performance analysis of a two‐way relay‐assisted free‐space optical communication system, over an atmospheric turbulent channel modeled by the Gamma–Gamma distribution and also affected by path loss and misalignment errors. A half‐duplex, decode‐and‐forward, two‐way, optical relay is considered, which establishes communication between two terminals, when direct communication is not possible because of non line‐of‐sight propagation or large distance. For the presented system and channel models and considering heterodyne detection at the receiver, we formulate the statistics of the instantaneous signal‐to‐noise ratio, followed by calculation of exact analytical expressions of capacity and BER. The mathematical expressions are formulated in terms of easily computable Meijer's G‐function. This mathematical analysis is accompanied with several numerical examples to illustrate the effect of the key system parameters. Copyright © 2015 John Wiley & Sons, Ltd.     

Performance analysis of a variable‐gain amplify‐and‐forward relayed mixed RF‐FSO system

In this work, an amplify‐and‐forward variable‐gain relayed mixed RF‐FSO system is studied. The considered dual‐hop system consists of a radio frequency (RF) link followed by a free space optical (FSO) channel. The RF link is affected by short‐term multipath fading and long‐term shadowing effects and is assumed to follow the generalized‐K fading distribution that approximates accurately several important distributions often used to model communication channels. The FSO channel experiences fading caused by atmospheric turbulence that is modeled by the gamma‐gamma distribution characterizing moderate and strong turbulence conditions. The FSO channel also suffers path loss and pointing error induced misalignment fading. The performance of the considered system is analyzed under the collective influence of distribution shaping parameters, pointing errors that result in misalignment fading, atmospheric turbulence, and path loss. The moment‐generating function of the Signal power to noise power ratio measured end‐to‐end for this system is derived. The cumulative distribution function for the Signal power to noise power ratio present between the source and destination receiver is also evaluated. Further, we investigate the error and outage performance and the average channel capacity for this system. The analytical expressions in closed form for the outage probability, symbol and bit error rate considering different modulation schemes and channel capacity are also derived. The mathematical expressions obtained are also demonstrated by numerical plots.     

Effects of pointing errors and channel fading on the performance of free‐space optically‐preamplified PPM systems

In this paper, we study the impact of pointing errors and channel fading on the performance of free‐space, optically preamplified, M ‐ary PPM systems. We consider two types of free‐space optical links: (i) inter‐satellite links and (ii) inter‐building links. For inter‐satellite links, only pointing error is considered. Starting with a Rayleigh model for the pointing error angle, we derive analytically the PDF for the pointing error parameter and for the signal‐to‐noise ratio (SNR) per bit. For inter‐building links, we derive the density function for the SNR per bit that includes the combined effects of pointing errors and channel fading, assuming Rayleigh‐distributed pointing errors. The channel fading models considered in this study for inter‐buildings links are the log‐normal and gamma–gamma models. We provide the error probability as a function of the average SNR per bit for both types of links. To cover systems with and without forward error correction, we compute the average SNR per bit required to achieve a bit error rate of 10^?4 and 10^?9. The corresponding power penalties are computed for different symbol sizes, scintillation indexes, and pointing jitters. Copyright © 2016 John Wiley & Sons, Ltd.     

Trellis code‐aided high‐rate M‐QAM space‐time labeling diversity using a unitary expansion

In this paper, we present a high‐rate M‐ary quadrature amplitude modulation (M‐QAM) space‐time labeling diversity (STLD) system that retains the robust error performance of the conventional STLD system. The high‐rate STLD is realised by expanding the conventional STLD via a unitary matrix transformation. Robust error performance of the high‐rate STLD is achieved by incorporating trellis coding into the mapping of additional bits to high‐rate codes. The comparison of spectral efficiency between the proposed trellis code‐aided high‐rate STLD (TC‐STLD) and the conventional STLD shows that TC‐STLD with 16‐QAM and 64‐QAM respectively achieves a 12.5% and 8.3% increase in spectral efficiency for each additional bit sent with the transmitted high‐rate codeword. Moreover, we derive an analytical bound to predict the average bit error probability performance of TC‐STLD over Rayleigh frequency‐flat fading channels. The analytical results are verified by Monte Carlo simulation results, which show that the derived analytical bounds closely predict the average bit error probability performance at high signal‐to‐noise ratios (SNR). Simulation results also show that TC‐STLD with 1 additional bit achieves an insignificant SNR gain of approximately 0.05 dB over the conventional STLD, while TC‐STLD with 2 additional bits achieves an SNR gain of approximately 0.12 dB.     

Improved auxiliary particle filter‐based synchronization of chaotic Colpitts circuit and its application to secure communication

In this paper, we propose a synchronization scheme based on an improved auxiliary particle filter (IAPF) for chaotic Colpitts circuit and conduct an experimental study on the synchronization performance with application to secure communications. Specifically, with the synchronization scheme, when the chaotic signals generated by an analog Colpitts circuit are transmitted through a nonideal channel, the distorted signals are processed digitally by the novelly designed IAPF at the receiver, in order to obtain the synchronized signals of the transmitter circuit. Experimental results indicate that synchronization can be achieved over both the additive white Gaussian noise channel and the multipath fading channel with low signal‐to‐noise ratio, even if there exist severe circuit parameter mismatches between the transmitter and the receiver. Furthermore, a chaos‐masking secure communication system is constructed and verified over both the additive white Gaussian noise channel and the multipath fading channel, and the bit error rate is evaluated versus different signal‐to‐noise ratios and symbol periods. It is shown that the achievable bit error rate can reach the order of magnitude of 10 ^{− 4} without error correction coding techniques. In addition, security analysis demonstrates that the proposed chaotic secure communication system is resistant to the brute‐force attack. Copyright © 2013 John Wiley & Sons, Ltd.     

Variable‐rate adaptive modulation with optimum switching thresholds for cooperative systems with relay selection

In this paper, the performance of variable‐rate adaptive modulation schemes in the amplify‐and‐forward cooperative systems with relay selection is analyzed over Rayleigh fading channels. We consider constant power and discrete‐rate adaptive multi‐level modulation techniques. The switching levels required for discrete‐rate adaptive modulation have been determined for two schemes, namely fixed switching levels and optimum switching levels, both respecting a target bit error rate requirements, where in the later scheme, the switching levels are optimally determined in a way that the average spectral efficiency of the system is maximized. Two M‐ary modulation schemes, namely quadrature amplitude modulation and phase shift keying, are considered. Closed‐form expressions are derived for three performance metrics, namely average spectral efficiency, outage probability, and average bit error rate, for two cases: independent and identically distributed fading relay links and independent and non‐identically distributed links. It is shown that, compared with using fixed switching levels, employing optimum switching levels provides a slight improvement in the spectral efficiency and moderate improvements in the signal‐to‐noise ratio gain and in the outage probability of the system. It is also shown that compared with the independent and identically distributed links, independent and non‐identically distributed relay links yield a slight increase in the signal‐to‐noise ratio gain and a slight decrease in the diversity order of the system. Copyright © 2011 John Wiley & Sons, Ltd.     

Semi‐random LDPC codes for CDMA communication over non‐linear band‐limited satellite channels

This paper considers the application of low‐density parity check (LDPC) error correcting codes to code division multiple access (CDMA) systems over satellite links. The adapted LDPC codes are selected from a special class of semi‐random (SR) constructions characterized by low encoder complexity, and their performance is optimized by removing short cycles from the code bipartite graphs. Relative performance comparisons with turbo product codes (TPC) for rate 1/2 and short‐to‐moderate block sizes show some advantage for SR‐LDPC, both in terms of bit error rate and complexity requirements. CDMA systems using these SR‐LDPC codes and operating over non‐linear, band‐limited satellite links are analysed and their performance is investigated for a number of signal models and codes parameters. The numerical results show that SR‐LDPC codes can offer good capacity improvements in terms of supportable number of users at a given bit error performance. Copyright © 2006 John Wiley & Sons, Ltd.     

Performance analysis of selective cooperation in amplify‐and‐forward relay networks over identical Nakagami‐m channels

In cooperative communications, multiple relays between a source and a destination can increase the diversity gain. Because all the nodes must use orthogonal channels, multiple‐relay cooperation becomes spectrally inefficient. Therefore, a bestrelay selection scheme was recently proposed. In this paper, we analyzed the performance of this scheme for a system with the relays operating in amplify‐and‐forward mode over identical Nakagami‐m channels using an exact source–relay–destination signal‐to‐noise ratio (SNR).We derived accurate closed‐form expressions for various system parameters including the probability density function of end‐to‐end SNR, the average output SNR, the bit error probability, and the channel capacity. The analytical results were verified through Monte Carlo simulations. Copyright © 2011 John Wiley & Sons, Ltd.     

Performance analysis of spectrally efficient amplify‐and‐forward opportunistic relaying scheme for adaptive cooperative wireless systems

In this paper, we propose an adaptive amplify‐and‐forward (AF) relaying scheme that selects the best relay among the available relay nodes opportunistically to cooperate with a source node for improvement of the spectral efficiency. This improvement can be achieved by introducing a policy that gives the useful cooperative regions and defines a switching threshold signal‐to‐noise ratio that guarantees the bit error rate (BER) of cooperative transmission is below the target. We model all links as independent non‐identically distributed Rayleigh fading channels. We then derive closed‐form expressions for the average spectral efficiency, average BER, and outage probability when an upper bound for the signal‐to‐noise ratio of the end‐to‐end relay path is applied and adaptive discrete rate is considered. Numerical and simulation results show that the proposed scheme, compared with the outage‐based AF incremental relaying, AF fixed relaying, and the conventional direct transmission, can achieve the maximum average spectral efficiency while maintaining the average BER and outage probability. Copyright © 2013 John Wiley & Sons, Ltd.