Preparation and characterization of novel optically active poly(amide‐imide)/α‐Fe2O3 nanocomposites containing l‐alanine moieties

An optically active poly(amide‐imide) (PAI) was synthesized from the polymerization reaction of N,N′‐(Pyromellitoyl)‐bis‐l ‐alanine diacid chloride with 2,5‐diaminotoluene. The obtained inorganic metal oxide nanocomposites composed of PAI/nanostructured hematite (α‐Fe₂O₃) were synthesized through ultrasonic irradiation. The resulting nanocomposites were characterized by Fourier transform infrared spectroscopy, powder X‐ray diffraction, transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). The TEM results indicated that the nanoparticles were dispersed homogeneously in PAI matrix on nanoscale. TGA confirmed that the heat stability of the nanocomposites was improved in the presence of α‐Fe₂O₃ nanoparticles. POLYM. COMPOS., 37:1805–1811, 2016. © 2014 Society of Plastics Engineers     

Poly(amide‐imide)/organoclay nanocomposites using glycine as a natural amino acid: study on fire and thermal behavior

In the present study, new functional poly(amide‐imide)/organoclay nanocomposite films were successfully fabricated through the solution intercalation technique. New poly(amide‐imide) (PAI) containing glycine was synthesized via solution polycondensation of 1,1',3,3'‐tetraoxo(5,5'‐biisoindoline‐2,2'‐diyl)diacetic acid with 4,4′‐diaminodiphenylsulfone. The synthesized PAI was characterized by ¹H NMR, Fourier transform infrared (FTIR) spectroscopy, gel permeation chromatography, elemental analysis and inherent viscosity. Then, PAI/organoclay nanocomposite films containing 4 and 8 wt% of organoclay were prepared via solution intercalation through blending of organoclay 30B with the PAI solution. The nanostructures and properties of the PAI/organoclay were investigated using FTIR spectroscopy, XRD, transmission electron microscopy (TEM), TGA, DSC and microscale combustion calorimetry. XRD and TEM revealed the good dispersion of organoclay in the polymer matrix. TGA indicated that the addition of organoclay into the PAI matrix increases the thermal decomposition temperatures and char yields of the nanocomposites. Organoclay shows a positive effect in improving the flame retardancy of the PAI, reflecting the decrease in heat release rate, the total heat release and the heat release capacity of the PAI nanocomposites, while the thermal stability of the PAI nanocomposites only increased slightly compared with the neat polymer. © 2013 Society of Chemical Industry     

Synthesis and characterization of new optically active poly(amide‐imide‐urethane) thermoplastic elastomers,derived from 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L‐leucine‐p‐aminobenzoic acid) and PEG‐MDI

A new class of optically active poly(amide‐imide‐urethane) was synthesized via two‐step reactions. In the first step, 4,4′‐methylene‐bis(4‐phenylisocyanate) (MDI) reacts with several poly(ethylene glycols) (PEGs) such as PEG‐400, PEG‐600, PEG‐2000, PEG‐4000, and PEG‐6000 to produce the soft segment parts. On the other hand, 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L ‐leucine‐p‐amidobenzoic acid) (2) was prepared from the reaction of 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L ‐leucine) diacid chloride with p‐aminobenzoic acid to produce hard segment part. The chain extension of the above soft segment with the amide‐imide 2 is the second step to give a homologue series of poly(amide‐imide‐urethanes). The resulting polymers with moderate inherent viscosity of 0.29–1.38 dL/g are optically active and thermally stable. All of the above polymers were fully characterized by IR spectroscopy, elemental analyses, and specific rotation. Some structural characterization and physical properties of this new optically active poly(amide‐imide‐urethanes) are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2288–2294, 2004     

New poly(amide imide)s containing bis(4‐trimellitimidophenyl) sulfone and hydantoin moieties in the main chain: Synthesis and properties

Several new poly(amide imide)s were synthesized through the polycondensation reactions of bis(4‐trimellitimidophenyl) sulfone [N,N′‐(4,4′‐diphenylsulfone) bistrimellitimide] with a number of hydantoin derivatives in a medium consisting of thionyl chloride, N‐methyl‐2‐pyrrolidone, and pyridine. The polycondensations produced a series of novel poly(amide imide)s in high yields with inherent viscosities of 0.20–0.46 dL/g. The resulting poly(amide imide)s were characterized with elemental analysis, viscosity measurements, thermogravimetric analysis, derivative thermogravimetry, solubility testing, and Fourier transform infrared spectroscopy. All the polymers were soluble at room temperature in polar solvents such as N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethyl sulfoxide, tetrahydrofuran, and N‐methyl‐2‐pyrrolidone. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1776–1782, 2005     

Synthesis and characterization of novel aromatic poly(amide‐imide)s derived from 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl or 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl and various aromatic diamines

New aromatic diimide‐dicarboxylic acids having kinked and cranked structures, 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl (2a) and 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl (2b), were synthesized by the reaction of trimellitic anhydride with 2,2′‐bis(4‐aminophenoxy)biphenyl (1a) and 2,2′‐bis(4‐aminophenoxy)‐1,1′‐binaphthyl (1b), respectively. Compounds 2a and 2b were characterized by FT‐IR and NMR spectroscopy and elemental analyses. Then, a series of novel aromatic poly(amide‐imide)s were prepared by the phosphorylation polycondensation of the synthesized monomers with various aromatic diamines. Owing to structural similarity, and a comparison of the characterization data, a model compound was synthesized by the reaction of 2b with aniline. The resulting polymers with inherent viscosities of 0.58–0.97 dl g^?1 were obtained in high yield. The polymers were fully characterized by FT‐IR and NMR spectroscopy. The ultraviolet λ_max values of the poly(amide‐imide)s were also determined. The polymers were readily soluble in polar aprotic solvents. They exhibited excellent thermal stabilities and had 10% weight loss at temperatures above 500 °C under a nitrogen atmosphere. Copyright © 2003 Society of Chemical Industry     

Thermally stable and organosoluble cardo binaphthylene based poly(amide imide)s and poly(ester imide)s

A new imide‐containing dicarboxylic acid based on a twisted binaphthylene unit, 2,2′‐bis(N‐trimellitoyl)‐1,1′‐binaphthyl (1), was synthesized from 1,1′‐binaphthyl‐2,2′‐diamine and trimellitic anhydride in glacial acetic acid. The structure of compound 1 was fully characterized with spectroscopic methods and elemental analysis. Series of thermally stable and organosoluble poly(amide imide)s (4a–4d) and poly(ester imide)s (5a–5d) with similar backbones were prepared by the triphenyl phosphite and diphenylchlorophosphate activated direct polycondensation of diimide dicarboxylic acid 1 with various aromatic diamines and diols, respectively. With due attention to the structural similarity of the resulting poly(amide imide)s and poly(ester imide)s, most of the differences between these two block copolyimides could be easily attributed to the presence of alternate amide or ester linkages accompanied by imide groups in the polymer backbone. The ultraviolet maximum wavelength values of the yellowish polymers were determined from their ultraviolet spectra. The crystallinity of these copolyimides was estimated by means of wide‐angle X‐ray diffraction, and the resultant polymers exhibited a nearly amorphous nature, except for the polymers derived from benzidine and 4,4′‐binaphthol. The poly(amide imide)s exhibited excellent solubility in a variety of highly polar aprotic solvents, whereas the poly(ester imide)s showed good solubility in less polar solvents. According to differential scanning calorimetry analyses, polymers 4a–4d and 5a–5d had glass‐transition temperatures between 331 and 357°C and between 318 and 342°C, respectively. The thermal behaviors of the obtained polymers were characterized by thermogravimetric analysis, and the 10% weight loss temperatures of the poly(amide imide)s and poly(ester imide)s were between 579 and 604°C and between 566 and 577°C in nitrogen, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3203–3211, 2006     

Synthesis and characterization of novel copolymers of poly(ether ketone ketone) and poly(ether ketone sulfone imide)

A new monomer containing sulfone and imide linkages, bis{4-[4-(p-phenoxyphenylsulfonylphenoxy)benzoyl]-1,2-benzenedioyl}-N,N,N′,N′-4,4′-diaminodiphenyl ether (BPSPBDADPE), was prepared by the Friedel–Crafts reaction of bis(4-chloroformyl-1,2-benzenedioyl)-N,N,N′,N′-4,4′-diaminodiphenyl ether with 4,4′-diphenoxydiphenyl sulfone. Novel copolymers of poly(ether ketone ketone) and poly(ether ketone sulfone imide) were synthesized by electrophilic Friedel–Crafts solution copolycondensation of terephthaloyl chloride with a mixture of DPE and BPSPBDADPE. The polymers were characterized by different physico-chemical techniques. The polymers with 10–25?mol% BPSPBDADPE are semicrystalline and had increased T _gs over commercially available PEEK and PEKK (70/30) due to the incorporation of sulfone and imide linkages in the main chains. The polymer IV with 25?mol% BPSPBDADPE had not only high T _g of 194?°C but also moderate T _m of 338?°C, having good potential for melt processing and exhibited high thermal stability and good resistance to common organic solvents.     

Synthesis and properties of poly(amide imide)s based on 2,2′‐ or 4,4′‐bis(4‐aminophenoxy)biphenyl and various bis(trimellitimide)s

Three series of isomeric poly(amide imide)s (series III, IV, and V) were synthesized by the direct polycondensation of 2,2′‐bis(4‐aminophenoxy)biphenyl (2,2′‐BAPB), 4,4′‐bis(4‐aminophenoxy)biphenyl (4,4′‐BAPB), or their equimolar mixture (2,2′‐BAPB/4,4′‐BAPB = 1/1) with 12 diimide diacids and with triphenyl phosphite and pyridine as condensing agents. A comparison of the physical properties of these three series was also made. The inherent viscosities of series III, IV, and V were 0.25–0.84, 0.25–1.52, and 0.43–1.30 dL g^?1, respectively. Most of the series III polymers showed better solubility because of the non‐para structure, with the solubility order found to be III > V > IV. According to X‐ray diffraction patterns, the amorphous poly(amide imide)s had excellent solubility, whereas the crystalline polymers were less soluble. All the soluble polymers afforded transparent, flexible, and tough films, which had tensile strengths of 57–104 MPa, elongations at break of 3–20%, and initial moduli of 2.05–2.86 GPa. The glass‐transition temperatures (measured by differential scanning calorimetry) were highest for series IV, which contained the rigid 4,4′‐biphenyl units (254–299°C); copolymer series V ranked second (237–277°C), and series III, with crank 2,2′‐biphenyl structures, had the lowest values (227–268°C). The 10% weight‐loss temperatures (measured by thermogravimetric analysis) were close to one another, ranging from 527 to 574°C in nitrogen and from 472 to 543°C in air. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2763–2774, 2002     

Poly(Amide‐Imide)s Based on Amino‐Terminated Oligoimides

Abstract

An amino‐terminated oligoimide was prepared by the Michael addition reaction of ethylene bis‐maleimide (EBM) and 4,4′‐diamnio diphenyl‐sulfone (DDS) at an EBM:DDS molar ratio of 1:2. The poly(amide‐imide)s (PAI)s were prepared by condensation of this EBMDDS oligoimide with various aliphatic bisesters. The resultant PAIs were characterized by elemental analysis, IR spectral studies, and the number average molecular weight estimated by non‐aqueous conductometric titration and thermogravimetry. The curing reaction of an epoxy resin [a diglycidyl ether of bis‐phenol‐A (DGEBA)] with PAIs was monitored by differential scanning calorimetry (DSC). Glass‐ and carbon‐reinforced laminates of PAI‐epoxy resin were also prepared and characterized.     

Microwave‐promoted rapid synthesis of new optically active poly(amide imide)s derived from N,N′‐(pyromellitoyl)‐bis‐L‐isoleucine diacid chloride and aromatic diamines

A pyromellitic dianhydride (benzene‐1,2,4,5‐tetracarboxylic dianhydride) was reacted with L ‐isoleucine in acetic acid, and the resulting imide acid [N,N′‐(pyromellitoyl)‐bis‐L ‐isoleucine] (4) was obtained in a high yield. 4 was converted into N,N′‐(pyromellitoyl)‐bis‐L ‐isoleucine diacid chloride by a reaction with thionyl chloride. The polycondensation reaction of this diacid chloride with several aromatic diamines, including 1,4‐phenylenediamine, 4,4′‐diaminodiphenyl methane, 4,4′‐diaminodiphenylsulfone (4,4′‐sulfonyldianiline), 4,4′‐diaminodiphenylether, 2,4‐diaminotoluene, and 1,3‐phenylenediamine, was developed with two methods. The first method was polymerization under microwave irradiation, and the second method was low‐temperature solution polymerization, with trimethylsilyl chloride used as an activating agent for the diamines. The polymerization reactions proceeded quickly and produced a series of optically active poly(amide imide)s with good yields and moderate inherent viscosities of 0.17–0.25 dL/g. All of the aforementioned polymers were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of these optically active poly(amide imide)s are reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 951–959, 2004     

Synthesis and characterization of novel optically active poly(amide‐imide)s

4,4′‐(Hexafluoroisopropylidene)‐bis‐(phthalic anhydride) (1) was reacted with L ‐leucine (2) in toluene solution at refluxing temperature in the presence of triethylamine and the resulting imide‐acid (4) was obtained in quantitative yield. The compound (4) was converted to the diacid chloride (5) by reaction with thionyl chloride. The polymerization reaction of the imide‐acid chloride (5) with 1,6‐hexamethylenediamine (6a) , benzidine (6b) , 4,4′‐diaminodiphenylmethane (6c) , 1,5‐diaminoanthraquinone (6d) , 4,4′‐sulfonyldianiline (6e) , 3,3′‐diaminobenzophenone (6f) , p‐phenylenediamine (6g) and 2,6‐diaminopyridine (6h) was carried out in chloroform/DMAc solution. The resulting poly(amide‐imide)s were obtained in high yield and are optically active and thermally stable. All of the above compounds were fully characterized by IR, elemental analyses and specific rotation. Some structural characterization and physical properties of those optically active poly(amide‐imide)s are reported. © 1999 Society of Chemical Industry     

Surface Treatment of ZrO2 Nanoparticles with Biosafe Citric Acid and Its Utilization for the Synthesis of L-leucine Based Poly(Amide–Imide) Nanocomposites

This study aimed at preparing three nanocomposites of optically active poly(amide–imide) and zirconium dioxide (ZrO₂) inorganic nanoparticles through the ultrasonic process. First, the surface of ZrO₂ nanocomposites was chemically modified with bio-active citric acid in the basic media. Then, the poly(amide–imide) was reinforced with modified nanocomposites and three poly(amide–imide)/ZrO₂-citric acid nanocomposites were synthesized by ultrasonic irradiation. The poly(amide–imide) was prepared by polycondensation of N-trimellitylimido-L-leucine with 4,4′-diaminodiphenylsulfone using of triphenyl phosphite and molten tetra-n-butylammonium bromide as green media. The obtained poly(amide–imide)/ZrO₂-citric acid nanocomposites were characterized by different techniques.     

Synthesis and properties of poly(amide–imide)s based on N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide,p‐aminobenzoic acid and various aromatic diamines

A new diimide–diacid monomer, N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide (I), was prepared by azeotropic condensation of 4,4′‐oxydiphthalic anhydride (ODPA) and p‐aminobenzoic acid (p‐ABA) at a 1:2 molar ratio in a polar solvent mixed with toluene. A series of poly(amide–imide)s (PAI, III_a–m) was synthesized from the diimide–diacid I (or I′, diacid chloride of I) and various aromatic diamines by direct polycondensation (or low temperature polycondensation) using triphenyl phosphite and pyridine as condensing agents. It was found that only III_k–m having a meta‐structure at two terminals of the diamine could afford good quality, creasable films by solution‐casting; other PAIs III using diamine with para‐linkage at terminals were insoluble and crystalline; though III_g–i contained the soluble group of the diamine moieties, their solvent‐cast films were brittle. In order to improve their to solubility and film quality, copoly(amide–imide)s (Co‐PAIs) based on I and mixtures of p‐ABA and aromatic diamines were synthesized. When on equimolar of p‐ABA (m = 1) was mixed, most of Co‐PAIs IV had improved solubility and high inherent viscosities in the range 0.9–1.5 dl g^?1; however, their films were still brittle. With m = 3, series V was obtained, and all members exhibited high toughness. The solubility, film‐forming ability, crystallinity, and thermal properties of the resultant poly(amide–imide)s were investigated. © 2002 Society of Chemical Industry     

Thermal and morphology characterization study of bio‐active poly(amide‐imide)‐based nanocomposites reinforced with modified SiO2 nanoparticle with poly(vinyl alcohol)

Among the nanoparticles (NPs), the amorphous SiO₂ NPs are very useable, because of their important characteristics for different applications, such as mechanical performance, thermal properties, and biodegradability effects. For this manifest features SiO₂ NPs were used as filler in this study. Firstly, these NPs were modified with poly(vinyl alcohol) (PVA). Then, the poly(amide‐imide) (PAI) was synthesized from reaction between N‐trimellitylimido‐l ‐methionine and 4,4′‐diaminodiphenylether in the presence of ionic liquid and triphenyl phosphite. Next, the modified SiO₂ NPs with PVA (SiO₂‐PVA) were incorporated into the PAI matrix for the preparation of PAI‐SiO₂‐PVA nanocomposites (PSiPNs). Finally, the resulting SiO₂‐PVA and PSiPNs were characterized by different analyses like field emission scanning electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, and thermogravimetric analysis (TGA). TGA showed high thermal stability of the obtained PSiPNs compared to the pure PAI. POLYM. COMPOS. 37:1231–1237, 2016. © 2014 Society of Plastics Engineers     

Preparation of soluble poly(amide imide) derivatives with metal salts and phosphorous compounds

Soluble poly(amide imide) derivatives were prepared through the direct polycondensation of 1,2,4‐benzenetricarboxylic acid and three diamines—bis[4‐(3‐aminophenoxy)phenyl]sulfone, bis(4‐aminophenyl)‐1,4‐diisopropylbenzene, and 4,4′‐oxydianilne—in the presence of metal salts and phosphorous compounds. Phosphonium salt, which was used as the initiating species and was prepared by the reaction of the metal salts and phosphorous compounds, reacted with 1,2,4‐benzenetricarboxylic acid to form acyloxy phosphonium salt, and then the salt was reacted with a diamine for the preparation of the prepolymers. The prepolymers were converted into the corresponding poly(amide imide)s in a homogeneous solution state at 180°C. The poly(amide imide)s showed good thermal and mechanical properties. Glass‐transition temperatures were observed from 240 to 270°C in differential scanning calorimetry traces. A melting endotherm was not observed for the polymers with differential scanning calorimetry. The initial decomposition occurred around 400°C according to thermogravimetric analysis, and major weight loss was observed from 610 to 680°C. The poly(amide imide)s had comparatively good solubility in aprotic polar solvents at concentrations high enough (～30%) for the fabrication of various forms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1399–1407, 2002     

Synthesis and properties of new poly(amide‐imide)s based on 1,3‐bis[4,4'‐(trimellitimido) phenoxy] propane and aromatic diamines

Six new poly(amide‐imide)s 8a–f containing trimethylene moiety in the main chain were synthesized by the polycondensation reactions of 1,3‐bis[4,4'‐(trimellitimido) phenoxy] propane 6 with six different aromatic diamines 7a–f in a medium constituting N‐methyl‐2‐pyrrolidone, triphenylphosphite, CaCl₂, and pyridine as condensing agents. The polycondensation reaction produced a series of novel poly(amide‐imide)s 8a–f in high yields with inherent viscosities between 0.35 and 0.63 dL/g. The resulting poly(amide‐imide)s were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility tests, and FTIR spectroscopy. 1,3‐Bis[4,4'‐(trimellitimido) phenoxy] propane 6 as a new monomer containing trimethylene moiety was synthesized using a three‐step reaction. At first 1,3‐bis[4,4'‐nitrophenoxy] propane 3 was prepared by the reaction of 4‐nitrophenol 1 with 1,3‐dibromo propane 2 in DMF solution . Then, dinitro 3 was reduced to 1,3‐bis[4,4'‐aminophenoxy] propane 4 by using a solution of sodium sulfite in ethanol. Finally, 1,3‐bis[4,4'‐(trimellitimido) phenoxy] propane 6 was prepared by the reaction of one equivalent diamine 4 with two equivalents of trimellitic anhydride 5 in a mixture of acetic acid‐pyridine (3 : 2). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of new polymer nanocomposites based on chiral poly(amide-imide)/surface-modified ZnO nanoparticles containing 4,4′-methylene bis(3-chloro-2,6-diethylaniline) linkages via ultrasonication-assisted process

In the present investigation, a novel chiral poly(amide-imide) (PAI) was synthesized via direct polycondensation reaction of chiral diacid monomer with 4,4′-methylene bis(3-chloro-2,6-diethylaniline) in molten tetrabutylammonium bromide as a green solvent. Then PAI-based bionanocomposites (BNC)s have been successfully prepared via ultrasonic irradiation method using zinc oxide (ZnO) nanoparticles functionalized by γ-aminopropyltriethoxysilane as a coupling agent to decrease aggregation of nanoparticles in polymer matrix. The physicochemical and morphology properties of the neat PAI and BNCs were studied using ¹H-NMR, FT-IR spectroscopy, specific rotation, elemental analysis, X-ray diffraction, field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). FT-IR and TEM depicted that the ZnO nanoparticles function as a physical cross-linking agent with PAI through hydrogen bonding between the OH on the ZnO nanoparticles and the C=O of the amide and imide groups. Also, TEM and FE-SEM images revealed that ZnO nanoparticles were dispersed in PAI matrix with particle size between 15 and 25 nm. Thermogravimetric analysis data showed an improvement of thermal stability of new BNCs in comparison with the pure PAI.     

Architectural effect of poly(acrylic acid) and poly(amide imide) block copolymers on dispersion of carbon nanotubes in water

The dispersion of carbon nanotubes (CNTs) in water by poly(acrylic acid) (PAA) and poly(amide imide) (PAI) block copolymers and homo‐PAA is investigated. Poly(acrylic acid)‐block‐poly(amide imide) (PAA‐block‐PAI), poly(acrylic acid)‐block‐poly(amide imide)‐block‐poly(acrylic acid) (PAA‐block‐PAI‐block‐PAA), and heteroarm star block copolymer poly(acrylic acid)₂poly(amide imide) (PAA₂PAI) with similar molecular weights and PAA contents are used as the copolymers. The dispersion of CNTs is observed by dynamic light scattering and ultraviolet‐visible spectroscopy. The presence of the hydrophobic sequence improves the dispersion. PAA₂PAI has the best dispersion ability, followed in order by PAA‐block‐PAI‐block‐PAA, PAA‐block‐PAI, and homo‐PAA. In the dry state, aggregates of CNT are observed by transmission electron microscopy (TEM) in the mixture with PAA‐block‐PAI and homo‐PAA. The adhesion of the copolymers to CNT is also observed by TEM and is due to the high affinity between hydrophobic PAI and CNT. In particular, PAA₂PAI and PAA‐block‐PAI‐block‐PAA well cover the CNTs. The presence of PAI and the PAA location are important for the dispersion of CNTs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43461.     

Synthesis and characterization of organosoluble and transparent polyimides derived from trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride

A novel dianhydride, trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride (1,2‐CHDPA), was prepared through aromatic nucleophilic substitution reaction of 4‐nitrophthalonitrile with trans‐cyclohexane‐1,2‐diol followed by hydrolysis and dehydration. A series of polyimides (PIs) were synthesized from one‐step polycondensation of 1,2‐CHDPA with several aromatic diamines, such as 2,2′‐bis(trifluoromethyl)biphenyl‐4,4′‐diamine (TFDB), bis(4‐amino‐2‐trifluoromethylphenyl)ether (TFODA), 4,4′‐diaminodiphenyl ether (ODA), 1,4‐bis(4‐aminophenoxy)benzene (TPEQ), 4,4′‐(1,3‐phenylenedioxy)dianiline (TPER), 2,2′‐bis[4‐(3‐aminodiphenoxy)phenyl]sulfone (m‐BAPS), and 2,2′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]sulfone (6F‐BAPS). The glass transition temperatures (T_gs) of the polymers were higher than 198°C, and the 5% weight loss temperatures (T_d5%s) were in the range of 424–445°C in nitrogen and 415–430°C in air, respectively. All the PIs were endowed with high solubility in common organic solvents and could be cast into tough and flexible films, which exhibited good mechanical properties with tensile strengths of 76–105 MPa, elongations at break of 4.7–7.6%, and tensile moduli of 1.9–2.6 GPa. In particular, the PI films showed excellent optical transparency in the visible region with the cut‐off wavelengths of 369–375 nm owing to the introduction of trans‐1,2‐cyclohexane moiety into the main chain. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42317.     

Synthesis of novel poly(amide‐imide)s containing trimellitylimido‐DL/L‐alanine moieties via direct polycondensation

N‐Trimellitylimido‐DL and L ‐alanine ( 3 ) were prepared from the reaction of trimellitic anhydride ( 1 ) with DL and L ‐alanine ( 2 ) in N,N‐dimethyl formamide (DMF) solution at refluxing temperature. The direct polycondensation reaction of the monomers imide‐diacid ( 3 ) with 4,4′‐diaminodiphenylsulfone ( 4a ), 4,4′‐diaminodiphenylmethane ( 4b ), 1,4‐phenylenediamine ( 4c ), 1,3‐phenylenediamine ( 4d ), 2,4‐diaminotoluene ( 4e ), and 4,4′‐diaminodiphenylether ( 4f ) was carried out in a medium consisting of triphenyl phosphite, N‐methyl‐2‐pyrolidone (NMP), pyridine, and calcium chloride. The resulting poly(amide‐imide)s PAIs, with inherent viscosities 0.32–0.66 dL/g, were obtained in high yield. All of the above‐mentioned compounds were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of these new optically active PAI s are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1312–1318, 2001