Polymerization of vinyl acetate using visible radiation and a dye-reducing agent sensitizer: 2. Kinetic studies and polymerization mechanism

The polymerization of vinyl acetate photosensitized by ethyl eosin and ascorbic acid in aqueous methanol shows a marked induction period before polymerization commences, but thereafter, irradiation does not affect the rate of polymerization. Both dissolved oxygen and water are essential for polymerization, and the rate passes through a maximum as the concentration of dye or reducing agent is increased. A mechanism for the reaction is proposed involving initiation of polymerization by hydroxyl radicals. Polymerization initiated by reaction between hydrogen peroxide and ascorbic acid is also studied as this system is thought to participate in the photochemical system.     

Emulsion copolymerization of vinyl acetate and 2‐ethyl hexyl acrylate using nonionic emulsifiers in loop reactor

Batch emulsion copolymerization of vinyl acetate and 2‐ethyl hexyl acrylate (VAc/2EHA = 90 : 10) was initiated by the thermal initiators ammonium persulfate and potassium persulfate at 70°C in the presence of nonylphenol ethoxylates with varying chain lengths and poly(vinyl alcohol). VAc–2EHA copolymer latexes were synthesized as two different series in a loop reactor. The first series was initiated by ammonium persulfate, and the second series was initiated by potassium persulfate. The influence of the counterions or initiators and chain lengths of a nonionic emulsifier on the properties of VAc–2EHA copolymer latexes were determined by measuring the viscosities, weight‐average molecular weights, number‐average molecular weights, molecular weight distribution, and surface tension of latexes to air. The results for the copolymer latexes indicated that some of their physicochemical properties increased with increasing chain length of the nonionic emulsifier, but some of them followed a different trend for the two initiators. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1380–1384, 2005     

Synthesis and characterization of diethyl-dithiocarbamic acid 2-[4-(2-diethylthiocarbamoylsulfanyl-2-phenyl-acetyl)-2,5-dioxo-piperazin-1-yl]-2-oxo-1-phenyl-ethyl ester as new reversible addition-fragmentation chain transfer agent for polymerization of ethyl methacrylate

Diethyl-dithiocarbamic acid 2-[4-(2-diethylthiocarbamoylsulfanyl-2-phenyl-acetyl)-2,5-dioxo-piperazin-1-yl]-2-oxo-1-phenyl-ethyl ester as a novel di-functional reversible addition–fragmentation chain transfer (RAFT) agent was synthesized based on 2,5-diketopiperazine. The RAFT agent was designed based on the propagating core (R group) approach and characterized by ¹H NMR, ¹³C NMR, FT-IR, elemental analysis, and melting point technique. Then, ethyl methacrylate was synthesized via free radical and RAFT polymerizations. To investigate the effect of the RAFT agent on the kinetic of polymerization, molecular weight, and polydispersity index (PDI) of polymers and also monomer conversion were monitored. Also, synthesized polymers were characterized by ¹H NMR, ¹³C NMR, FT-IR, and TGA. Characterization analyses of synthesized RAFT agent were consistent with the structure. NMR and FTIR analyses confirmed end group incorporation of RAFT agent into polymer structure. According to results, poly(ethyl methacrylate) with low PDI (1.14) was obtained. Kinetic study indicated well-controlled polymerization of ethyl methacrylate by synthesized RAFT agent. TGA results showed that RAFT agent could reduce termination reactions and so reduce head-to-head bonds and chain-end unsaturation by keeping the concentration of radicals low enough.     

2,2,6,6‐Tetramethylpiperidine‐1‐oxyl‐mediated living mini‐emulsion polymerization of styrene under ambient pressure in a semi‐batch process: effect of ascorbic acid

2,2,6,6‐Tetramethylpiperidine‐1‐oxyl (TEMPO)‐mediated living mini‐emulsion polymerization of styrene with feeding of an ascorbic acid aqueous solution throughout the polymerization was performed at 90 °C under ambient pressure. The concentrations of sodium dodecylbenzenesulfonate (SDBS) and ascorbic acid were varied to study the shell polymerization mechanism of latex particles and evolution of growing chains. Interactions between SDBS and ascorbic acid and incompatibility between ascorbic acid and styrene were evident from UV‐visible analyses. High hydrophilicity of ascorbic acid in the aqueous phase was proved using a gravimetric method. Accordingly, the formation of a surface barrier on particles was proposed because of the interactions between SDBS and ascorbic acid. For higher SDBS concentration, the surface barrier on the particles was denser. Therefore, the polymerization rate decreased with increasing SDBS concentration. However, the polymerization rate increased with increasing ascorbic acid concentration. This was due to a higher consumption rate of TEMPO by ascorbic acid. Free TEMPO tended to reside in surface zones of the particles because of the surface activity between the aqueous and oil phases. The surface zones were thus the main loci where TEMPO was consumed by ascorbic acid. The estimated number‐average molecular weight (M_n) of growing chains increased in a linear fashion with conversion. This indicated that the growing chains were produced via living mini‐emulsion polymerization. For these growing chains, the estimated M_n and final polydispersity increased with increasing SDBS concentration. This was caused by a decrease in TEMPO concentration in the surface zones of particles with increasing SDBS concentration. The ‘livingness’ of polystyrene was identified by conducting bulk polymerization of chain extension. Based on the results obtained, a shell polymerization mechanism of latex particles was proposed, and living mini‐emulsion polymerization was limited to the surface zones of particles. Copyright © 2010 Society of Chemical Industry     

Viscosity and rheological behavior of carbon dioxide-expanded fish oil fatty acid ethyl esters: Measurement using a rotational viscometer and modeling

The viscosity of fish oil fatty acid ethyl esters (FAEE) in equilibrium with CO₂ was determined at 40, 55, and 70 °C and pressures ranging from 0.1 to about 12 MPa using a rotational rheometer equipped with a high pressure cell. Viscosity of CO₂-expanded (CX) FAEE decreased due to the dissolution of CO₂ with pressure, which was temperature dependent. The viscosity of CX FAEE was correlated using a new empirical model utilizing saturation pressure and temperature with temperature-dependent parameters, which allows interpolation of viscosity data for any pressure and temperature within the envelope of this study. As well, viscosity was modeled using available data for CO₂ solubility in FAEE at specific temperatures of this study utilizing simpler models with only one parameter, such as the Grunberg and Nissan model. The rheological data suggest shear thickening behavior of CX FAEE at elevated pressures. The limitations of the rotational rheometer for measuring CX liquids at viscosities below 1 mPa s are discussed. Understanding of viscosity and rheological behavior of CX FAEE is essential for equipment and process design involving such lipids.     

A systematic approach to the study of multicomponent polymerization kinetics: butyl acrylate/methyl methacrylate/vinyl acetate. III. Emulsion homopolymerization and copolymerization in a pilot plant reactor

A systematic study of the terpolymerization of butyl acrylate/methyl methacrylate/vinyl acetate (BA/MMA/VAc) is being conducted. In this third stage of the study,

1 Parts 1 and 2: Dubé, M. A. & Penlidis, A., Polymer, 36 (1995) 587. Dubé, M. A. & Penlidis, A., Macromol. Chem. Phys., 196 (1995) 1101.

emulsion homopolymerizations and copolymerizations of the monomers comprising the BA/MMA/VAc system were performed in a 5 litre stainless steel pilot plant reactor, mainly for troubleshooting purposes and as a precursor to the detailed terpolymerization experiments to follow. First, a search for a stable emulsion recipe was conducted. At the same time, experimental procedures were established for the 5 litre pilot plant reactor along with product characterization techniques. Finally, selective emulsion homopolymerizations and copolymerizations were run for each of the three monomers and each combination of the three monomers, respectively. The polymers produced were characterized for conversion, composition, molecular weight and particle size. Although the emphasis of the experiments was to establish recipes, techniques, and procedures for emulsions terpolymerization, several useful observations were made regarding the kinetics even from these troubleshooting experiments.     

Simple and economic syntheses of some (Z)-7- and (Z)-9-alkenyl acetates,and of (E,Z)-7,9-dodecadien-1-yl acetate,the sex pheromone of the European grapevine moth,using aleuritic acid as a common starting material

Short syntheses of (Z)-7-dodecen-1-yl acetate, (Z)-7-tetradecen-1-yl acetate, (Z)-9-dodecen-1-yl acetate, and (Z)-9-tetradecen-1-yl acetate from 7-hydroxyheptanal and 9-oxononanoic acid precursors obtained by oxidative cleavage of easily available aleuritic acid are reported. The key step in these syntheses is a stereoselective Wittig reaction between aldehyde and alkyl-phosphonium salt. Wittig-Horner type reaction of 7-hydroxyheptanal and diethyl cyanomethylphosphonate gave the ,-unsaturated nitrile derivative which after protection of the hydroxyl group was reduced to the corresponding aldehyde. Wittig reaction of the latter, followed by acetylation, completed the synthesis of (E,Z)-7,9-dodecadien-1-yl acetate, the sex pheromone of the European grapevine mothLobesia botrana Schiff.