In vitro displacement by rat serum of adsorbed radiolabeled poloxamer and poloxamine copolymers from model and biodegradable nanospheres

Poloxamer 407 and poloxamine 908 have been used by many research groups to modify the surface of both model latex and biodegradable nanospheres, thereby producing nanospheres that have shown reduced protein adsorption in vitro and extended circulation times in vivo. A potential limitation of such systems is the desorption of the copolymer coating layer. We describe a two-stage process to radiolabel poloxamer 407 and poloxamine 908 that has facilitated an investigation into this potential desorption, in vitro. The first stage of the labeling procedure involved the substitution of the terminal hydroxyl groups in each poly(ethylene oxide) (PEO) chain of poloxamer 407 and poloxamine 908 with an amino group. The aminated copolymers were then radiolabeled with 125Iodine Bolton-Hunter reagent. The efficiency of labeling was calculated to be approximately 20% for the tetramine poloxamine 908 and approximately 33% for the diamine poloxamer 407. Remaining free amino groups were then either acetylated, using acetic anhydride, or left in the free amino form. Covalent linkage of the radiolabel to the copolymer was confirmed by nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy. The stability of the link between radiolabel and copolymer to hydrolysis was also confirmed; <4% loss of radiolabel occurred from poloxamine 908 after incubation in phosphate-buffered saline (PBS) at 37 degrees C for 8 days. The radiolabeled copolymers (with the free amino groups acetylated) were then used in experiments that have given the first direct evidence that adsorbed copolymers can be displaced by serum proteins in significant amounts from the surface of model and biodegradable nanospheres. The displacement was highly dependent on copolymer-nanosphere compatibility, with up to 78% of 125I tetramine poloxamine 908 being displaced from poly(lactide-co-glycolide) (PLGA) nanospheres in 24 h, compared with 20% displacement of 125I tetramine poloxamine 908 in 24 h from polystyrene nanospheres. These results have direct implication for the future design of drug delivery systems based on coated nanospheres.     

Primary amino-terminal heterobifunctional poly(ethylene oxide). Facile synthesis of poly(ethylene oxide) with a primary amino group at one end and a hydroxyl group at the other end

Well-defined poly(ethylene oxide) (PEO) with a cyano group at one end and a hydroxyl group at the other terminus was synthesized by the anionic ring opening polymerization of ethylene oxide (EO) initiated with (cyanomethyl)potassium (CMP) which was prepared by the metalation reaction of acetonitrile with potassium naphthalene in THF. Primary amino-terminal heterotelechelic PEO was obtained by the reduction of the cyano group at the end of the polymer chain by lithium aluminum hydride.     

Separation of proteolytic enzymes originating from Antarctic krill (Euphausia superba) by capillary electrophoresis

The viscosity-adjustable property of F127 block copolymer PEO99PPO69PEO99, PEO and PPO being poly(ethylene oxide) and poly(propylene oxide), respectively, was found to be useful for the development of automated capillary electrophoresis (CE). The polymer solution can form a gel-like structure with sieving ability and can also serve as a dynamic coating material, thereby effectively suppressing the electroosmotic flow induced by the ionization of the silanol group on the quartz capillary inner wall. When applied to CE as a separation medium, F127 block copolymer can provide the advantages of high separation resolution, easy injection and replacement of the triblock copolymer solution and convenient capillary column treatment. High reproducibility of DNA electrophoretic migration time in CE by replenishing F127 solution in acid-washed capillary tubings can be achieved. The relative standard deviation of the DNA migration time is less than 2%. In the investigation of F127 concentration and temperature effects on the performance of DNA separation in CE, we have found that the DNA electrophoretic migration behavior in the F127 gel-like solution cannot be described by any one of the existing models.     

Anthracycline antibiotics non-covalently incorporated into the block copolymer micelles: in vivo evaluation of anti-cancer activity

The chemosensitising effects of poly(ethylene oxide)-poly(propylene oxide)-poly-(ethylene oxide) (PEO-PPO-PEO) block copolymers (Pluronic) in multidrug-resistant cancer cells has been described recently (Alakhov VY, Moskaleva EY, Batrakova EV, Kabanov AV 1996, Biocon. Chem., 7, 209). This paper presents initial studies on in vivo evaluation of Pluronic copolymers in the treatment of cancer. The anti-tumour activity of epirubicin (EPI) and doxorubicin (DOX), solubilised in micelles of Pluronic L61, P85 and F108, was investigated using murine leukaemia P388 and daunorubicin-sensitive Sp2/0 and -resistant Sp2/0(DNR) myeloma cells grown subcutaneously (s.c.). The study revealed that the lifespan of the animals and inhibition of tumour growth were considerably increased in mice treated with drug/copolymer compositions compared with animals treated with the free drugs. The anti-tumour activity of the drug/copolymer compositions depends on the concentration of the copolymer and its hydrophobicity, as determined by the ratio of the lengths of hydrophilic PEO and hydrophobic PPO segments. The data suggest that higher activity is associated with more hydrophobic copolymers. In particular, a significant increase in lifespan (T/C> 150%) and tumour growth inhibition (> 90%) was observed in animals with Sp2/0 tumours with EPI/P85 and DOX/L61 compositions. The effective doses of these compositions caused inhibition of Sp2/0 tumour growth and complete disappearance of tumour in 33-50% of animals. Future studies will focus on the evaluation of the activity of Pluronic-based compositions against human drug-resistant tumours.     

Thrombogenic properties of untreated and poly(ethylene oxide)-modified polymeric matrices useful for preparing intraarterial ion-selective electrodes

In vitro platelet adhesion studies are used to compare the thrombogenic properties of various polymer matrices useful for preparing implantable ion-selective membrane electrodes. Conventional plasticized poly(vinyl chloride) and alternate polyurethane materials (Tecoflex, Pellethane) doped with proton- (tridodecylamine) and potassium-selective (valinomycin) ionophores are shown to be potentially thrombogenic. Incorporation of high molecular weight block copolymers of poly(ethylene oxide) and poly(propylene oxide) (e.g., Pluronic F108 and Tetronic 1508) within ion-selective membranes reduces platelet adhesion. A more marked decrease in platelet adhesion is, however, observed when the Tecoflex-based membranes are coated with a thin photo-cross-linked layer of poly(ethylene oxide). Such surface-modified membranes are shown to retain potentiometric ion response properties (i.e., selectivity, response times, response slopes, etc.) essentially equivalent to untreated membranes.     

Triple-helical polynucleotides. Mixed triplexes of the poly(uridylic acid)-poly(adenylic acid)-poly(uridylic acid) class

By the techniques of interferon induction in primary rabbit kidney cells "superinduced" with metabolic inhibitors, ultraviolet absorbance-temperature profiles, sensitivity to pancreatic ribonuclease A, and sucrose velocity gradient ultracentrifugation, a number of reactions between double-helical RNA and single-stranded RNA or DNA homopolymers were investigated. The polymers involved in these studies were poly(adenylic acid), poly(uridylic acid), poly(ribothymidylic acid), poly(5-bromouridylic acid), poly(deoxythymidylic acid), poly(deoxyuridylic acid), poly(3-methyluridylic acid), poly(2'-O-methyluridylic acid), and poly(2'-azido-2'-deoxyuridylic acid). Two different reaction courses, both leading to the formation of triple helices, were noted: (1) poly(Ux)-poly(A) + poly(Uy) leads to poly(Ux)-poly(A)-poly(Uy) if the Tm of poly(Ux)-poly(A) was higher than the Tm of poly(Uy)-poly(A); (2) poly(Ux)-poly(A) + poly(Uy) leads to poly(Uy)-poly(A)-poly(Ux) if the Tm of poly(Ux)-poly(A) was lower than the Tm of poly(Uy)-poly(A). In these equations, the homopolymer written to the left of poly(A) implies Watson-Crick hydrogen bonding whereas the polymer to the right of poly(A) is involved in Hoogsteen hydrogen bonding.     

Spontaneous liposome formation induced by grafted poly(ethylene oxide) layers: theoretical prediction and experimental verification

Spontaneous liposome formation is predicted in binary mixtures of fluid phase phospholipids and poly(n)ethylene oxide (PEO)-bearing lipids by using single chain mean field theory. The range of stability of the spontaneous liposomes is determined as a function of percentage of PEO-conjugated lipids and polymer molecular weight. These predictions were tested by using cast films of 1, 2-diacyl-sn-glycerophosphocholines (e.g., egg L-alpha-lecithin, 1, 2-dimyristoyl-sn-glycero-3-phosphocholine, 1, 2-dipalmitoyl-sn-glycero-3-phosphocholine, and 1, 2-distearoyl-sn-glycero-3-phosphocholine) and 1, 2-dipalmitoyl-sn-glycerophosphatidylethanolamine-PEO conjugates (i.e. , 1, 2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[methoxypoly(e thylen e glycol)2000]carboxamide and 1, 2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[methoxypoly(e thylen e oxide)5000]carboxamide) that were hydrated above their gel-liquid crystal phase transition temperatures. Particle sizes of the resulting dispersions, analyzed by quasielastic light scattering, solute retention, 31P NMR, and freeze-fracture electron microscopy measurements, confirmed the single chain mean field predictions. These data indicate that thermodynamically stable, unilamellar liposomes are formed spontaneously by simple hydration of fluid phase phospholipid bilayer films containing low molar ratios of PEO-based amphiphiles. They further suggest that the equilibrium size and colloidal properties of fluid phase, PEO-modified liposomes can be predicted by using this theoretical approach. The implication of these results on the design and processing of sterically stabilized liposomes used in drug delivery applications also is described.     

High speed separation of DNA fragments by capillary electrophoresis in poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock polymer

The high speed separation of DNA fragments by using a triblock copolymer, 25% w/v F127 (PEO99PPO69PEO99 with PEO and PPO denoting polyethylene oxide and polypropylene oxide, respectively) which is easy to handle and does not need coating of the quartz capillary, has been investigated. Two ways to decrease the run time are presented: one is to shorten the effective capillary length and the other to increase the electric field strength. In a short capillary, the sieving ability of the separation medium versus the initial band width, and the band width spreading as a function of distance traveled dominate the resolution; at high electric field strength, Joule heating could deteriorate the separation. By taking both effects into account, the phi X174/HaeIII digest could be separated within 100 s by using an 8 mm effective length, 50 microns diameter capillary operating at 300 V/cm.     

Water-soluble polyion complex associates of DNA and poly(ethylene glycol)-poly(L-lysine) block copolymer

Complex formation of poly(ethylene glycol)-poly(L-lysine) (PEG-PLL) AB type block copolymer with salmon testes DNA or Col E1 plasmid DNA in aqueous milieu was studied. The PLL segment of PEG-PLL interacts with nucleic acid through an electrostatic force to form a water-soluble complex associate with a diameter of ca. 50 nm. PEG segments surrounding the core of the polyion complex prevented the complex from precipitation even under stoichiometric conditions, at which the unit ratio of L-lysine in PEG-PLL and phosphate in the DNA is equal. The profile of the thermal melting curve revealed a higher stabilization of DNA structure in PEG-PLL/DNA complexes compared to that in the complex made from DNA and PLL homopolymer with the same molecular weight as the PLL segment in PEG-PLL. This stabilizing effect on the DNA structure may be due to the compartmentalization of DNA into the microenvironment of PEG with low permittivity. The reversible nature of the PEG-PLL/DNA complex was further verified through the addition of polyanion [poly-(L-aspartic acid)]: Poly(L-aspartic acid) replaced DNA in the complex with PEG-PLL, resulting in the release of free DNA in the medium. Furthermore, the PEG-PLL/DNA complex showed high resistance against DNase I attack, suggesting DNA protection through the segregation into the core of the associate having PEG palisade.     

Capillary electrophoretic separation of 1 to 10 kbp sized dsDNA using poly(ethylene oxide) solutions in the presence of electroosmotic counterflow

DNA fragments of 1 to 10 kbp in length were separated by capillary electrophoresis (CE), using poly(ethylene oxide) (PEO) solutions in the presence of electroosmotic flow. The technique requires filling the capillary with the polymer solution by means of electroosmotic flow (EOF). Separation times of 6-7 min in PEO solutions ranging from 0.3 to 8 x 10(6) Mr at 375 V/cm were sufficient to separate the 11 components of the dsDNA ladder (0.5 to 10 kbp) by size. The migration behavior of the double-stranded (ds)DNA fragments, interpreted by "Ferguson plot analysis", in the system is indistinguishable from that previously reported for capillary zone electrophoresis (CZE) in a polyacrylamide solution without EOF. Potential advantages of conducting CZE using polymer solutions in the presence of EOF are: (i) Possibility of long migration times on short columns; (ii) possibility of introducing relatively viscous, high Mr polymer solutions into narrow capillaries; (iii) possibility of establishing polymer concentration gradients in capillaries; (iv) possibility of concentrating the starting zone by balancing electrophoretic migration and electroosmotic transport.     

Preparation and characterization of poly(propylene fumarate-co-ethylene glycol) hydrogels

We describe the preparation and bulk characterization of a cross-linked poly(propylene fumarate-co-ethylene glycol), p(PF-co-EG), hydrogel. Eight block copolymer formulations were made varying four different design parameters including: poly(ethylene glycol) (PEG) molecular weight, poly(propylene fumarate) (PPF) molecular weight, copolymer molecular weight, and ratio of PEG to PPF. Two different cross-linking formulations were also tested, one with a cross-linking monomer and one without. The extent of the cross-linking reaction and the degree of swelling in aqueous solution were determined on copolymer formulations made without a cross-linking monomer. The values of molecular weight between cross-links, Mc ranged from 300 +/- 120 to 1190 +/- 320 as determined from swelling data (n = 3). The equilibrium volume swelling ratios, Q, varied from 1.5 +/- 0.1 to 3.0 +/- 0.1. This ratio was found to increase with increasing PEG content in the copolymer and decrease with increasing PPF molecular weight. The values for complex dynamic elastic moduli magnitudes of E*, ranged from 0.9 +/- 0.2 to 13.1 +/- 1.1 MPa for the formulations with the cross-linking monomer, N-vinyl pyrrolidinone (VP) (n = 3). The ultimate tensile stresses on the formulations made with VP ranged from 0.15 +/- 0.03 to 1.44 +/- 1.06 MPa, and tensile moduli ranged from 1.11 +/- 0.20 to 20.66 +/- 2.42 MPa (n = 5). All of the mechanical properties increased with increasing PPF molecular weight and decreased with increasing PEG content in the copolymer. These data show that the physical properties of p(PF-co-EG) hydrogels can be tailored for specific applications by altering the material composition.     

Human serum albumin as a probe for protein adsorption to nanoparticles: relevance to biodistribution

A range of poloxamers and poloxamines were adsorbed to biodegradable poly(lactide-co-glycolide) (PLGA) and non-biodegradable polystyrene (PS) particulate systems in order to alter their surface characteristics and produce potential drug targeting systems. Human serum albumin (HSA) was chosen as a model protein to investigate protein adsorption to the above systems and was quantified by two techniques. I125 radiolabelled HSA proved to be a useful probe for determining protein adsorption but was limited by a modification that occurred on storage. Also, HSA eluted from the particle surface was quantified by densitometry following it's development on an SDS-PAGE gel. Both techniques produced similar results. For cleaned coated PS particles it was found that the PEO chain length and the molecular structure of the block copolymer were important in preventing protein adsorption. The presence of excess block copolymer in the uncleaned preparations resulted in further suppression of HSA adsorption, which was thought to be due to their detergent properties. Due to the different results obtained with similarly coated PLGA particles, it was concluded that the block copolymers adsorb onto the surface of the PLGA particles in a different conformation to those adsorbed onto PS particles. Correlating in vivo biodistribution in terms of the prevention of protein (opsonin) adsorption was of only limited success and it was concluded that adsorption data for a single model protein can only be used with caution to predict the in vivo behaviour of colloidal targeting systems.     

The sequence dependence of circular dichroism spectra of DNA duplexes

The three satellite DNAs of Drosophila virilis, that approximate to poly d(CAAACTA)-poly d(TAGTTTG), poly d(TAAACTA)-poly d(TAGTTTA), poly d(CAAATTA)-poly d(TAATTTG), the satellite DNA of Drosophila melanogaster that approximates to poly d(AATAT)-poly d(ATATT), the synthetic DNA duplexes, poly dG-poly dC, poly d(AT)-poly d(AT), poly d(AAT)-poly d(ATT), poly d(AAC)-poly d(GTT), poly d(TAC)-poly d(GTA) and the block copolymer d(C15A15)-d(T15G15) all have circular dichroism spectra consistent with the propositions that they have the same molecular geometry in solution and that it is the kind and frequency of nucleotide triplet sequences that determines their spectral characteristics. Poly dA-poly dT is apparently an exception.     

Poly(L-lysine)-graft-dextran copolymer is a novel stabilizer of triplex DNA (I): stabilization of poly(dA).2poly(dT) triplex

Comb-type polylysine copolymer having grafted hydrophilic side chains was newly designed as a novel stabilizer of triplex DNAs. The comb-type copolymer elevated melting temperature of poly(dA).2poly(dT) triplex by 50 degrees C without affecting reversibility, melting and reassociation, of the triplex in buffer with physiological salt concentrations. The stabilizing effect of the copolymer was greater than spermine. Our results indicate that the molecular designing of polycation with comb-type structure is a successful strategy for creating an effective triplex stabilizer.     

Injectable microcapsules prepared with biodegradable poly(alpha-hydroxy) acids for prolonged release of drugs

In this paper, microencapsulation techniques for the preparation of drug-containing monolithic microcapsules for prolonged release using biodegradable poly(alpha-hydroxy) acids, such as polylactic acid, poly(lactide-co-glycolide) and copoly(lactic/glycolic) acid are reviewed. Phase separation, solvent evaporation, and spray drying procedures are discussed. In order to achieve controlled-release formulations of highly water-soluble drugs that are entrapped efficiently, various manufacturing techniques and procedures have been developed. Degradation of poly(alpha-hydroxy) acids is altered by the copolymer ratio and molecular weight of the polymer used to make microcapsules and the amounts of released microencapsulated drugs correlate almost linearly with polymer degradation, indicating that controlled-release formulations, which release drugs over different times, can be prepared using suitable poly(alpha-hydroxy) acids with different degradation rates.     

Molecular calculations of poly(ethylene glycol) transport across a swollen poly(acrylic acid)/mucin interface

The transport of poly(ethylene glycol) chains than can promote mucoadhesion across the interface between lightly cross-linked poly(acrylic acid) and mucin may be analyzed as a function of molecular characteristics using theories of chain penetration in a dilute network. The fracture energy for the ensuing adhesive bond is proportional to the number of polymer chains crossing the interface, which, in turn, is related to the polymer volume fraction, the chain diffusion coefficient, and the degree of polymerization. Relevant calculations were performed for a number of cross-linked poly(acrylic acid) gels and three different types of poly(ethylene glycol) chains.     

Analysis of chromatin structure in vivo

Comb-like polyethylene oxide (PEO) surfaces were prepared on low-density polyethylene (PE). The comb-like PEO chain density was changed gradually along the sample lengths by corona discharge treatment with gradually increasing power and the following graft copolymerization of poly(ethylene glycol) monomethacrylate macromers (PEO-MA). The macromers with different PEO repeat unit, 1, 5, and 10, were used. The prepared comb-like PEO gradient surfaces were characterized by water contact angle, Fourier transform infrared spectroscopy in the attenuated total reflectance mode, and electron spectroscopy for chemical analysis. All these measurements indicated that the PEO chains are grafted on the PE surface with gradually increasing density of PEO. Plasma protein adsorption and platelet adhesion on the PEO gradient surfaces decreased with increasing PEO chain length and surface density. As observed by scanning electron microscopy, PEO10-MA-grafted surface with high PEO density was very effective in preventing protein adsorption and platelet adhesion and did not activate the platelets.     

In vitro dissociation of antifungal efficacy and toxicity for amphotericin B-loaded poly(ethylene oxide)-block-poly(beta benzyl L aspartate) micelles

Amphotericin B (AmB) is a membrane-active drug used frequently for the treatment of systemic fungal diseases. Limitations for the use of AmB include poor water solubility and potential for serious systemic toxicities. Recently, it has been demonstrated that the aggregation state of AmB is a determinant factor for toxicity. To increase its therapeutic index, AmB has been solubilized in micelles based on poly(ethylene oxide)-block-poly(beta-benzyl-l-aspartate) (PEO-block-PBLA), using a dialysis method of drug loading. The aggregation state of AmB has been investigated by electronic absorption spectroscopy. AmB loaded in PEO-block-PBLA micelles is non-hemolytic for concentrations up to 15 microgram/ml. AmB as Fungizone(R) initiates hemolysis at 1.0 microgram/ml. The onset of hemolysis correlates with the respective critical aggregation concentrations (CACs) of AmB. The antifungal activity of the AmB-loaded PEO-block-PBLA micelles is four to eight times higher than Fungizone(R) in terms of minimal inhibitory concentrations (MICs). PEO-block-PBLA has no antifungal activity for concentrations up to 200 microgram/ml. The basis for the increase in antifungal activity of AmB-loaded PEO-block-PBLA micelles is unclear, but may be related to a stabilizing effect of the polymeric micelles against auto-oxidation of the AmB heptaene moiety or alternatively, an enhancement in membrane perturbation of fungal cells.     

Controlled release of cytarabine from poly(2-hydroxyethyl methacrylate-co-N-vinyl-2-pyrrolidone) hydrogels

Controlled release of cytarabine (ara-C) from poly(2-hydroxyethyl methacrylate-co-N-vinyl-2-pyrrolidone) [p(HEMA-co-VP)] hydrogels cross-linked with ethylene glycol dimethacrylate (EGDMA) is reported. Three compositions of copolymer, each one with a different cross-linking degree, have been studied: H50/VP50, H75/VP25, and H80/VP20. Ara-C (5-25 mg by disc) was trapped in the gels by including it in the polymerization feed mixture. The ara-C release time was between 1 day from H50/VP50/E0.5 discs and 16 days from H80/VP20/E15 discs. In all cases there is a time period for which the drug release rate is constant.     

In vivo and in vitro responses to poly(ethylene terephthalate-co-diethylene glycol terephthalate) and polyethylene oxide blends

Although biocompatible polymeric compounds are generally nontoxic, nonimmunogenic, and chemically inert, implants made from these materials may trigger acute and chronic inflammatory responses. These inflammatory reactions may induce degeneration of implanted biopolymer. Interactions between implanted biomaterial and inflammatory cells are mediated by many cellular events involving cellular adhesion and activation. We studied the inflammatory responses in vivo and in vitro to samples of biopolymers composed of poly(ethylene terephthalate-co-diethylene glycol terephthalate) plus 0, 5, 25% of polyethylene oxide. We observed that these biopolymers did not induce inflammatory responses when implanted in the peritoneal cavity of mice for 28 days. However we observed deposition of hyaluronic acid at the surface of implanted biomaterial, suggesting that tolerance to biomaterial occurred after surgical implantation. No significant adhesion of inflammatory cells such as mononuclear phagocytes and peripheral leukocytes were observed in vitro, when poly(ethylene terephthalate-co-diethylene glycol terephthalate) blends were used as substratum to cellular adhesion. These results suggest that blends composed of poly(ethylene terephthalate-co-diethylene glycol terephthalate) induce low inflammatory cell adhesion, since no rejection of biopolymer was observed when implanted in experimental animal models.